Bluetooth, required for the wireless device: Kobo ereader. WiFi.

Similar Questions

• Requirements for the wireless 11n

  We are looking for in our series of 1130 standalone AP upupgrade of for a wireless LAN Controller 2504 Cisco and Cisco LWAPP AP 2600 we currently 1130 AP is connected to a 3560 10/100 POE switch. We also have a switch not POE 2960 10\100\1000.

  The wireless 11n will work connected to the switch 10\100 3560 POE? Or we will have to get a 10\100\1000 POE switch? A cheaper alternative would be to get injectors feeding AP 2600 s to connect to the switch of 2960 10\100\1000?

  You can still connect to the APS. 10/100 PoE switch. The only thing is that the switch port will be the bottleneck. With 802.11n, the customer will have more flow and you should make sure that you don't oversubscribe the Ethernet port.

  Sent by Cisco Support technique iPhone App

• The settings saved on this computer does not meet the requirements for the network

  My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

  Hello Tazdmx83,

  Thanks for posting on Microsoft answers Community Forums.

  This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

  1. click on start and control access panel.

  2. double-click on network connections

  3. right click on the wireless adapter and select Properties.

  4. Select wireless networks, click the name of your wireless network and choose Properties.

  5. in network authentication, select open to disable wireless security.

  6. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

  Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

  Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Error message: "cannot find the wireless device" and not scan using 3 in 1 copy fax print HP 4500.

  Original title: Carpenter

  I can print but can't scan. Tried to uninstall then install the 3 in 1 copy fax printing hp 4500 but says cannot find the wireless device.

  Hi Ryan,

  You can check the link to HP support to run the HP Diagnostic Utility to check the issue of scanning:

  Find and fix common problems using tools of diagnosis HP printer=

  You can also check out the link to HP support and try to update the latest drivers/software for your printer:

  HP support

  You can also read the articles and check if it helps:

  Add or remove a scanner

  Scanning: Frequently asked questions

  The problems of scanning

• Laptop does not recognize the wireless device

  Same problem here.  Feature WiFi suddenly stopped working after a windows vista updated.  Wireless switch is engaged, messeges troubleshooting all say computer doesn't detect any wireless devices.  It's as if someone pulled the unit and the antenna of the portable computer.  I also downloaded the wireless drivers and Setup several times without success.  Wireless device appears in the Device Manager page.  The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum.  Is it possible that the wireless device is broken?  All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop.  Either way, I have a Compaq Presario F730US laptop.  All the options out there?  Thank you

  Hello Bdufaud,

  Thanks for posting in the Microsoft Answers forum!

  You mentioned that your WiFi feature worked well until a recent update. Do you remember when the update occurred? An option that can help is to run aSystem Restore, making sure to select a previous restore point when the problem started to occur.

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Not prompted to enter the password for the wireless connection.

  I have windows 7 and were able to access wifi trouble-free connections. However, today, I'm at a new location and when I click on the desired link I don't get no prompt to enter the password or key. I can access my computer connection currently wifes laptop so I know that the connection is working correctly. I went to control panel, network configuration and manage the connections and removed all my other connections. I rebooted and still cannot access the connection desired because I can not enter the password. I also tried to add the connection and it still doesn't work. Thanks for your help!

  Hello

  In the same exact location, your wireless computer does not work, and your wife request computer password and works OK with the password?

  The password prompt is displayed only after the computer is currently connected to the access point.

  Maybe your computer firewall blocks the ability to connect to the access point.

  Wireless in general.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• New installation of Windows 7; No driver for the wireless adapter

  Ohmuhgod, please help!

  I'm on a Pavilion G7 - 2017cl and just installed Windows 7 Ultimate 64 bit. I installed all the recommended drivers, software and upgrades http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5275...              and everything is going well except for the wireless network card driver. the sp57538.exe and the sp56154.exe do not install correctly.

  In the devices under other devices Manager, there's a yellow! indicator "Network controller" with "manufacturer: unknown" and under the hardware id is:

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01
  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C
  PCI\VEN_168C & DEV_0032 & CC_028000
  PCI\VEN_168C & DEV_0032 & CC_0280

  I tried: manually update the driver with several other downloads of various products of hp as a poke-and-hope approach; all the different combinations of deactivation/activation of the active devices while trying to install the drivers; install drivers in safe mode; Uninstall and reinstall the software amd chipset driver; HP Support Assistant; A patch of Bios setting parameters by default after a hard reset; and at my wits end, reinstalling the operating system and install all the fresh drivers one by one with a reboot after each... same result.

  I've been googling and binging for about ten hours... magical HP assistants, please send me a patch!

  Try Atheros:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D0%257CswItem%253Dob_108905_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D3%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• The requirements for the universal Clipboard not correct?

  Hello

  The requirements for the universal Clipboard for iMac is not correct. It should work on my iMac mid 2011, but it doesn't. It works on my Macbook Air mid-2013, so I know it works in general.

  You do not discuss Apple in these forums, we are all users like you.

  If you have any questions please ask, however if you have any comments for Apple please leave at www.apple.com/feedback.

• How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  See if this application works for you > https://itunes.apple.com/us/app/image-size/id670766542?mt=8

• iPhone Sync with PCI trying to sync my iphone to my computer via i-tunes soft ware.  It does give me an option for the phone device. How can I get the phone icon in the menu bar?

  I am trying to sync my iphone to my computer via i-tunes soft ware.  It does give me an option for the phone device. How can I get the phone icon in the menu bar?

  Mac or Windows?

• The amount of space (memory) required for the good functioning of Firefox?

  The amount of memory required for the operation of Firefox? Trying to decide between IE and Firefox. Research in the new computer and need to think about which browser to use, and how much space it needs to work properly.

  You need no more than 40 MB for the operation of Firefox.

• where the requirements for the current download? This used to be posted prominently.

  where the requirements for the current download? This used to be posted prominently.

  See:

  • http://www.Mozilla.org/en-us/Firefox/24.0/system-requirements/

  You can find the full version of the latest version of Firefox 24.0 in all languages and for all systems operating here:

  • http://www.Mozilla.org/en-us/Firefox/all.html

• During the installation of Firefox 4 beta, he told me that it does not work on my Mac. When I go to system requirements, need a page for Firefox3.6 requirements. Where can I find the requirements for the beta?

  The link to the minimum configuration for Firefox 4 beta takes you to a page that gives you the requirements for Firefox 3.6 instead. I guess that the requirements for the beta are different, that I can't seem to install the beta on my Mac. Where can I find the beta version of system requirements?

  Firefox 4 will not work on the Mac PPC, for Mac it needs the Intel processor. There is an accumulation of third parties based on Firefox 4 beta, which should work on Mac PPC, for details, see http://www.floodgap.com/software/tenfourfox/

• DDL required for the complete installation was not found. Error 1603. What should do?

  DDL required for the complete installation was not found. Error 1603. What should do? A link where to download the required DLL? Kindly help please.

  I tried everything, but received the same message. Attached to the screenshot.

  

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration