Bluetooth services does not not under W7 64-bit! No audio service, no matching Iphone, only basic job matching and many devices (including my Samsung Pixon) aren't matching at all

Similar Questions

• HP Probook 4530 s Bluetooth driver does not

  Hi all

  I have a Probook s 4530 and Bluetooth driver does not work.

  In Device Manager I see "Windows has stopped this device because it has reported problems (Code 43)".

  I deleted the driver and re-installed from the site Web HP and Intel support Web site, but that did not help.

  The driver always appears under the name: "generic Bluetooth adapter.

  The camera itself is 'Intel Centrino Bluetooth 3.0 + High Speed'

  Operating system is windows 7 Home premium 64-bit.

  Please help how can I solve this problem?

  Thank you.

  Please

  uninstall the WLAN and Bluetooth driver

  Reset

  Install the new WLAN drivers

  http://ftp.HP.com/pub/SoftPaq/sp62001-62500/sp62236.exe

  or

  http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59336.exe

  reset

  Bluetooth

  FTP://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59151.exe

  test the new

  http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64259.exe

• Bluetooth headset does not work in Windows 8

  I've just upgraded in Windows 8 and my bluetooth headset does not connect (worked well on Windows 7), he could be detected with the mating, but always appear "offline" after having been matched, both headphones are having the same problem, while mice bluetooh work well, is there whatever it might be do?

  I solved the problem.  I upgraded my Lenovo E530 to Windows 8 and the helmet worked.

  I made a copy of the Broadcom Bluetooth 4.0 driver and installed on my HP LPTOP.
  The Voyager Pro + headset now works on the P and Lenovo

• I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions!

  I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions! Thank you

  You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

• "lcwipx.exe of shortcut that you refer to is not available" and her does not open. He also asked delete me the shortcut. What is the problem and how to solve this?

  When connect my external hard drive and opening not wanting my my files, I get this message "shortened lcwipx.exe you make reference to is not available"and her does not open. He also asked delete me the shortcut. What is the problem and how to solve this?

  Hi Pascal,.

  I see that you get an error trying to access files on an external drive. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. What is the brand and model of the external drive?

  3. what security software is installed on the computer?

  4. have you made changes on the computer recently?

  5A external drive earlier good work?

  6. have you updated to Service Pack 2 installed?

  Method 1.

  Connect a different drive to the computer and check.

  Method 2.

  Plug this external drive on another computer and check the status.

  Method 3.

  Start the computer in safe mode and check.

  Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

  Method 4.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.

  Original title: updates

  Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.  Although I tried to reset nothing help.

  Have also tried to download Windows 10 but computer spends all day looking for updates, but nothing happens.

  As its been almost a year that it is updated, you may be better off to backup your data and backup of your entire system, so you can get back to this point at least if something goes wrong. Then:

  Update your anti-virus software and run a full scan. Then download, install, update and run a full scan with Malwarebytesfree. Keep it free, no need to start a trial etc. Malware can be a cause of failure of the updates, the scan won't take long to run and should report something nasty, if its there.

  Then you can try the following:

  1 convenience store update Windows - http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter

  2 system update readiness tool - http://windows.microsoft.com/en-us/windows7/what-is-the-system-update-readiness-tool

  3 components of reset update - https://support.microsoft.com/en-us/kb/971058

  4. check that "Windows update service" and "Background Intelligent Transfer Service" are listed and running according to the details in this article - https://support.microsoft.com/en-us/kb/2730071 "

  If the above does not help, consider trying a 'repair installation system' - http://www.sevenforums.com/tutorials/3413-repair-install.html if you have windows installation discs, or a 'factory reset' (updated) If your PC came with no windows disk and was preinstalled. NOTE - in case backup your data and your system first in the form of data may be lost if something goes wrong, and data will be lost in the case of a factory reset.

  If you do not want to reinstall again, post back with more details, that is at least what is the error code when the updates fail? (find an update failed in "view history update", right click and click details.) Check a bit to see if the same error code. ). Then someone else can we hope to help more.

• an error "file does not have a program associated with it for performing this action" when you click office and recent places.

  Original title:

  Win7 victory explrer click dsktop & mployment plces & get eror msg file is not a CDSA wth to prfrmin ths field prgrm. pls instl one prgrm so is alrdy instld Credit Union assc ltvds cntrl pnl prgrms

  I don't know how to fix. Help, please.    Win7 windows Explorer click

  Office & recent locations & grterror msg:
  This file does not have a program associated with it for performing this action. Please install a program or, if it is already installed. create an asssociationin the default programs control panel.
   
  Information given in the new thread:
  Error Msg When you try open office spaces & recent since the win Explorer

  when im in windows Explorer and click on the desktop or the recent places the link I get a msg of error and they will not open, but all others open. I posted pictures of error msg to skydrive yesterday.

  Hello

  Welcome to the Microsoft Community Forums.

  I see you've found an error "file does not have a program associated with it for performing this action" when you click office and recent places.

  1. Have you made changes on the computer before this problem?
  2. What is the full error message?

  I suggest you to report to us the screenshot of the Advanced window so that we can understand what exactly the situation.
  
  See:
  Use SkyDrive download collected files and post screen shot/image
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  The average while you can try the following steps and check if the error reappears.

  Method 1:

  Step 1:

  Start the computer in safe mode and check the number.

  Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.

  Follow this link provided below to start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  Put the computer to boot and check if the problem persists.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 of the KB article provided above.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  It will be useful.

  Back with the details so that we can help you further. We also indicate the result of the suggested steps.

• Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

  Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

  My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

  Hello

  Method 1.
  Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
  http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

  I suggest updating all your drivers from the link above and drivers Realtek especially.

  Method 2. Set the default Microphone.

  Once the drivers installed to check if the microphone is the default value, here's how:

  Exercise the functions mentioned below to adjust the Microphone as default:
  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. turn highlighted that Microphone and click "set as default".
   
  For more information see the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

• 38.0.1 updated to does not allow me to log into G-mail. I know that my user name and password, cookies are enabled and clear history information. I am able to Safari.

  38.0.1 updated to does not allow me to log into G-mail. I know that my user name and password, cookies are enabled and clear history information. I am able to Safari.

  Thank you. I could sign G-mail in Mode safe, so I "refreshed" Firefox and that took care of him. Appreciate your quick response and helpful instructions.

• My mac does not connect to the wifi unless I turn on the iphone

  My home wifi works great though I have my wifi enabled on my iPhone. But if I have the wifi turned on on my phone, free wifi does not work half the time, unless I wake up my iPhone. I do not use a personal hotspot, or any other type of phone wifi-centric. Just a normal modem and apple airport extreme router.

  My mac is a model of iMac end 2015 running El Capitan (later). Phone is running last sof

  Any ideas how to solve this problem?

  What exactly do you mean by "does not work? What is going on?

• Why is-Messages for my non apple contacts does not on my Mac, they work very well on my iPhone.

  Why is-Messages for my non apple contacts does not on my Mac, they work very well on my iPhone.

  Transfer continuity troubleshooting procedure

  Continuity of transfer troubleshooting (2)

  iPhone, iPad, iPod touch and Mac using continuity - connect

  SMS relay - set and use - Yosemite / iOS 8

  SMS relay - set and use - Yosemite / iOS 8 (2)

  Sending text messages

• Windows Live Hotmail Inbox does not update the autom automatically, until I have click Refresh. My OS is VISTA and IE9

  Windows Live Hotmail Inbox does not update the autom automatically, until I have click Refresh. My OS is VISTA and IE9.

  How can I solve the problem?

  Hi PaulaCohen,

  The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=1

• "Your operating system does not support the 64-bit version of Silverlight" when you try to install Silverlight on your computer.

  Original title: Silverlight problem

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  Clean installation of silverlight and reinstall...

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  http://support.Microsoft.com/kb/2608523

• I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight.

  Silverlight installation problems

  I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight. I have Vista Ultimate, a 64-bit system.  Help, please.

  Hello

  It's the operating system Vista Installation Forum.

  Microsoft has set up Forums to specifically to questions of Silverlight.

  They should be able to help you there.

  http://forums.Silverlight.NET/

  See you soon.