Bluetooth volume on incoming calls

Similar Questions

• The volume of incoming calls and notifications of Split

  Is it possible to split the notifications and the volume of incoming calls in two options?
  I got a SII and I still managed to keep notifications and incoming calls to another sound level...
  Thank you

  This has been asked before, but on Sony they must together exactly as it is defined by default on Android.

• Low sound Volume for incoming calls?

  I work in an area that has a constant decibel about 55 to 70 decibels throughout the day. The question that I am running missing phone calls because I can't hear the phone ring above the production area when he is on the ground.

  I did a test with a colleague who has the Droid Maxx and another who has a Razr Maxx HD with Nanotubes Ringtone that is ringing loud... very loud ring. You can find it in ringtones. Clarity is not the problem, but the noise level that it can produce to carry the sound is way lower then previous versions.

  The Maxx Droid and Droid Razr Maxx HD hit over 100 decibels on phones in the next calls.

  Droid Turbo barely touched the 75-85 and struggled.

  I think that there should be a standard to test out cell phones before being released on the noise levels. I hope it's something that can be fixed with a software update.

  I'll also open a ticket with Motorola Tech support on the issue.

  See image for App, I did the test with decibel-O-Meter in playstore

  RAZR Maxx HD Image

  Please mark for the Mark and Matt or...

  By Tech Droid Turbo has a decibel of around 75-85 decibels, and I asked to make a remark that I need at least 100 decibels to hear my camera in a semi noisey environment.

  Can I have someone this flag for the brand and or Matt in past a long to the engineers to see if something can be done. If we can't do something can Motorola now put the side of decibel on the SPEC Page that I know what my device will ring to.

  Thank you!

• BlackBerry Smartphones with a name on incoming calls in a car via bluetooth

  Hello

  Can someone help me.

  I just got a new company car where I divert my Bold 9700 via bluetooth to the car phone.

  All my incoming calls show the phone number, not the name of the caller and they are all in my contacts folder in blackberry as well as in the car unit.

  What should I change in the blackberry to ask him to show the name of the caller?

  Thanks for any help.

  Nick

  Hi, me again

  I checked with our it staff to work and my blackberry is all set up correctly and the bluetooth in the car is paired correctly but when I call out or somebody phones on behalf of the person is not displayed even if they're in my contacts folder in blackberry.

  There, anyone have any bright ideas?

  Thank you very much in anticipation.

  Nick

• Incoming calls mute after updating iOS 10.0.0.2 iPhone SE

  Hello

  After the update of 10.0.0.2, I saw a strange problem on my iPhone SE:

  • Incoming calls appear to be muted 2 ways (the two of us don't hear)
  • The speaker and mute icons on the screen looks normal (non-active)
  • When pressing the speaker icon 2 times (the first time it activates the "speaker" icon, but not the President himself, the second time, it disables the icon) all works fine again.

  It's the same when you use the standard helmet.

  A reboot seems to fix my problem for 1 time. But after that, the problem returns.

  I could not find any related problem, so maybe I'm missing some (new) settings?

  Any help is greatly appreciated!

  Peter

  Hi Montfrooij,

  Thank you for using communities of Apple Support. From what you have said, it seems that you are not able to hear a person during a call on the iPhone. Looks like you already have a troubleshooting.  I recommend you to read this article, it may be able to help solve the problem. You can also check that the iPhone is not connected to a headset Bluetooth, the sound of routing to that rather than the receiver.
  

  If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone - Apple Support

  See you soon.

• No sound on the hands-free car on incoming calls after upgrade iOS 10

  I recently updated my iPhone to iOS 10 6s. With one of the versions iOS 9 it makes my hands-free connection in my Toyota 'agitated', but this time I could call people without problem, so I thought everything was ok. That was, until I got a call and didn't hear a thing after accepting it.

  Seems iOS 10 has broken my audio on incoming calls. I can't hear the caller, and the caller does not hear me. I tried to reset network and matching settings once again, but unfortunately which didn't help either (this resolved the problem of stuttering last time).

  Anyone got tips on how to solve this problem?

  DelGurth salvation!

  I see that your car radio on your iPhone Bluetooth connection no longer works correctly.  I know it's important to have this job just so I'm happy to offer assistance.  Please follow the instructions in this article, and it may be necessary to contact Toyota to see if there is an update of the firmware available for your car stereo.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  Thank you for using communities of Apple Support.

  See you soon!

• Starkey Halo 2 passes to 'Flow Boost' memory state when the iPhone received incoming calls.   Is it possible to change the setting.

  I just got my Halo 2 a few days ago Starkey.  I noticed that when I get incoming calls on my iPhone 6, Halo 2 switches in position of memory 'Stream Boost' that increases the volume and picks up a lot of background noise.  Is it possible to change the default iPhone meets the memory of another parameter memory.

  No, you should contact the developer of the application to this topic.

• APPLE 5S PHONE DOES NOT RING ON INCOMING CALLS

  APPLE 5S PHONE DOES NOT RING ON INCOMING CALLS

  1. Have you checked to see if you have the volume mounted on the ring?
  2. Have you checked to ensure the silence on the side of the phone is not set to mute setting?
  3. Have you checked to see if you disturb not activated?

  

• My IPhone doesn't ring on incoming calls

  My IPhone falls call 10 seconds into the call and it doesn't ring on incoming calls. (the ringer is on)

  Hi Jamescdavis6,

  If your iPhone is not sounds to warn you of an incoming call, and you have checked to make sure the ring/silent switch is set to ring, try the following steps:

  • Check your settings do not disturb - if this setting has been enabled, then you will not be interrupted by phone calls.  You have to turn if off.

  Use of do not disturb on your iPhone, iPad or iPod touch

  • Check the speaker of your iPhone / material:

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker

  If you hear no sound from speaker, contact Apple technical support.

  • Check if your iPhone is stuck in headset mode

  If your headset does not work with your iPhone, iPad or iPod touch

  • You unplug your headphones, but when you adjust the volume on your iOS device, you still see an indicator of volume of the headphone.
  • 

  Take care

• Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

  Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

  Hello

  It can help to cancel your iPhone in a Bluetooth headset pairing, if it is currently associated with it.

  -On your iPhone, go to: settings > Bluetooth > tap the info "i" beside your headset > tap Forget this device.

• is it possible I can get Siri to tell me that my incoming calls?

  I don't know if it's possible, but when I have my Bluetooth headset and I have incoming calls I don't want to take my phone out to see who is calling.

  No, Siri no announcement incoming caller ID.

• my phone does not ring when there is an incoming call.

  My phone does not ring when there is an incoming call.

  Have you checked if it is on mute?

  The "secret" key is above the volume buttons on the left side of the iPhone (red = mute is enabled)

• BlackBerry Z30 incoming calls NOT Ringing - Z30

  Hello

  I recently did a quick reset on my Blackberry Z30 (outfits the two buttons for volume 10 seconds), this fixed my initial problem to experience the shift answering calls.

  When I get calls, now, however there is no ringing sound... I can see the incoming call and I answer the call, but there is no ringing sound.

  I tried to ensure that the volume buttons have turned up full, I even checked my notification settings and made sure that they are on normal. I checked also double the settings on the normal setting, ensure that the volume meter is full.

  Yet even after that, then by restarting the phone several times, still me the same problem.

  Does anyone have the magical answer, I would really advice, because miss me calls because there is no ringing sound.

  sdgardne wrote:
  Hello and welcome to the community!

  Have you tried changing the notification settings, check that and then to change them to what you want? Maybe something is 'stuck '...

  If not, has there been any rush before the event this behavior started? You already described the shift answering calls and restarting with volume keys, but was there something before? A new application? An update of a certain type? Something else?

  Or, if it was always like that? I don't think... and so began to understand what happened just before this behavior is a good first step to try to understand.

  Also, what OS is your device currently running please?

  Let us know.

  Hello

  Thank you for your reply,

  I tried to change the notification setting of 'silent' to 'normal' to see if it helps... but it did not help.

  I have not changed anything in the settings or downloading apps, I even tried to reset some default functionality and he still refuses to make the Bell Rings when someone calls me.

  The current software provides its update: OS Blackberry 10 - version of the 10.3.2.28.36 software

  If you have an idea of what the issue could be just I want to know, I would rather not completely reset my phone like this would be the last resort.

  UPDATED - HIS RING NOW ONCE AGAIN!

  I plugged into my macbook and tried to load in the Blackberry Link software, that the software did not recognize my phone (another new question lol), it's just returned to normal, and now I can hear it ring, thank God!

• Incoming call to Smartphones blackBerry - unique ring only previously diverted to vmail

  Hello

  I'm having a problem with incoming calls: I get a ring (regardless of the type of ringing) in the normal profile before that the incoming call is diverted to vmail. The phone is not in silent/unavailable mode and started to vibrate/ring, low volume. My service provider is Vodafone, although I am currently in Toronto and homelessness with Rogers Wireless.

  Any help greatly appreciated

  FP

  Check the following-

  Dial: * 61 * [phone number] * 11 * [time] #.

  Instead of phone number of your voice mail box number (call your operator to find out who) and instead of putting any value, i.e. 5, 10, 15, 20, 25 or 30. These values are seconds, after which your calls will be diverted/forwarded to voicemail. Setting a higher value will respond to your request.

  This string is only applicable GSM carriers.

• BlackBerry Smartphones untrapped exception: java.lang.NullPointerException on silent incoming call

  I got an incoming call and I hit him either the top or to the bottom of the volume button to turn off the sound.  The ringtone to silence, then the unsilenced ringtone 1 second later.  Then I hit the top or to the bottom of the volume once again button, then he silenced and I received this error message:

  Eception exception: java.lang.NullPointerException

  I clicked on OK and everything works fine.  Is there any solution for this and should I be worried?  I am running v4.7.1.40 (Platform 4.1.0.40).

  HI and welcome to the Forums!

  Untrapped exception happen - they are basically an event for which there is no program on the device to manage code. It's like a mistake on a computer--sometimes they straight. Future updates will probably help with some. A few things to check and try:

  (1) make sure you are on the latest OS for your business... you can check your carriers latest version certified through this Portal:

  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  (2) a Hard Reboot:

  Whenever random strange behaviors creep, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  (3) good memory management:

  There are three types of potential memory on a BB: 1) application memory, the device memory) 2 and 3) Media/SD memory card

  Application memory - it is the most important; It is protected (not available to the user), dedicated and (fixed size) space as the destination for the installation of applications (more a few storage applications, overhead and other costs). You can't touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can install only here... There is no other choice.

  The device memory - it is space on your BB you can touch these files, images, media, etc. In general, it is not very big, but it is available.

  Memory card SD/Media - is what it says... your SD card to store files, media, photos, etc.. It can be as large as your BB OS can support... see this KB:
  http://www.BlackBerry.com/BTSC/KB05461

  On some devices/OS levels, enforcement and the memory of the device are combined into "free file"... This is, IMO, a little more difficult to administer that you can't see really how AppMemory you have. Nevertheless, here are some tips to use:
  http://www.BlackBerry.com/BTSC/KB15345
  http://www.BlackBerry.com/BTSC/KB14320
  http://www.BlackBerry.com/BTSC/KB14213

  Finally, it is always important to correctly close applications when you are finished with them. Using the back or on the red button won't do that - those leave the app to decide what to do... and some let themselves memory-resident, consumes resources on your BB, slowing down the overall performance. Rather, to close an application, press the BBKey and select 'Farm' or 'Quit'... that forces the application to be closed, freeing for your new use the resources it consumed. Some applications will always be running (in general - BBMessenger, browser, homescreen, phone and Messages)... but, you should always close them properly - especially the browser... If we leave on a web page, it will not consume only additional resources, but the power of the battery as well.

  Good luck!