Bluetooth works not properly dv7-2110sa

Similar Questions

• iPhone upgrade of the navigation software now works not properly

  iPhone 5

  New IOS software updated and now the navigation screen not working not properly

  is your site on?

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

  Please help - it's driving me crazy! I got this to work!

  I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
  "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

  I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

  My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

  I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

  I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

  I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

  The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

  On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

  Any help would be really appreciated!

  Hello Lowwatts,

  Microsoft Xbox 360 community

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

  Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

  Community Microsoft Xbox360

  Try following the steps in this article:

  Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Manual lens correction works not properly.

  I am trying to correct the perspective of an image in lightroom or in the vertical and horizontal manual lens corrections are not working properly, they are extending to the image in a weird way. I used these cursors repeatedly but I don't know why sometimes, they stretch the image. Here's a video that shows the effect of cursors: Lightroom: manual lens correction works not properly - YouTube. I would like your opinion on this is that you know how I can solve this problem. Thank you

  Controls LR Vertical and Horizontal Correction lens are designed to 'fix' the perspective distortion. What is the perspective of "normal"?

  Normal lens - Wikipedia, the free encyclopedia

  Lenses wide angle move the vanishing points more far and telephoto lenses get the close.

  https://en.Wikipedia.org/wiki/Perspective_distortion_%28photography%29

  LR Vertical and Horizontal controls use the focal length and camera metadata from the image file and adjust the image based on its effective focal length. A goal of 200mm if on a 1.5 crop body factor has an effective focal length of 300mm, resulting in an extreme telephoto perspective. That's why you see more "stretch" the image when you adjust the Vertical control, with a focal length lenses below)<>

  The image file video YouTube has vertical converging vertical very light, slight clockwise rotation and distortion in light pad. You should be able to correct the image for parallel verticals with small values of Vertical and Rotation adjustment. I suggest using "Activate profile Corrections" (profile tab) to fix the small amount of lens distortion.

  So always questions please post the image file on Dropbox or other filesharing site and I'll take a look. Thank you.

• Satellite Pro U200: VGA output works not properly when the AC adapter / CC has been connected

  Hello

  I have a problem with vga output. When I'm working on the battery and connect my laptop to external monitor is ok, but when I connect adapter then start waving also bluetooth and wlan is not working properly. In other cases when I disconnect laptop battery and connect the AC adapter it works correctly.

  Thanks in advance

  Hello

  Can you please describe more precisely what is happening here? Does not properly is a rather general statement.

• Wireless keyboard not working not properly

  New wireless on El Capitan iMac keyboard. Shift strokes do not correspond to the characters on the keys.

  Bluetooth can not find keyboard, but it it connected. Using the Spanish and British keyboard. Same problem on both.

  for example type Shift? and get_. Seems to be a problem with the game to the top of the keyboard.

  Follow this link If your Apple wireless mouse, keyboard or trackpad is not working as expected - Apple Support

• mouse not working not properly. It jumps all over the screen by itself

  Since the upgrade to the latest version of El Capitan, I have a problem with my mouse and my Trackpad 2. The trackpad does not at all even though it is connected and bluetooth works. The mouse jumps around on the screen and it is difficult to land on the site I want.

  If the mouse you mention is a Magic Mouse 1, which is probably the reason why.   Magic mouse 1 works up to a point, but you need Magic Mouse 2 for maximum effect, once you have upgraded to El Capitan.  I would add, with new OS on the horizon (Sierra), your need for MM2 becomes even more pressing.

• HP envy 15-j104sl: display not working not properly

  Hello

  I have a Hp Envy 15-j104sl, unfortunately after a fall, the screen does not work properly: sometimes, the left part or the entire display turns white and it is impossible to use it unless I move the screen / hinges in another post.
  The glass is not broken, I think the problem may be in the base/hinges lower/some other type of contact works not very well.

  I am really disappointed with the online Hp support: I can't find location to send my laptop for repair, and I can't even call help if I have my warranty has expired.

  It's a bad display cable or possibly the display panel. It's going to not need a repair by a technician. Where do you live (country)? I'm not clear if you say your warranty is or has not expired?

• Since the update with OS 10.11.6, flash not working not properly

  Just got a new Mac Book Pro, new on mac in general. Had a video to play on a Web site but didn't work not, downloaded Chrome, worked well. Then made the update to OS 10.11.6 (not), and the video does not work (it says: cannot load the Flash plug-in). Made sure plugin has been enabled in my Chrome. Tried to download Flash himself, tried to remove Chrome and Flash and download Chrome still once, nothing works. Now for some reason, it works... What is (and was) happening... Someone has an idea? THX!

  -Chrome has built in Flash.

  -Safari does not come with Flash and use Flash with Safari, you need to download and install Flash

  So this is why worked chrome and Safari worked after downloading and installing Flash. Make sure you just threw always get Flash from the Adobe website.  Once you install Flash from Adobe it has also installed a Flash preferences panel in system preferences and yo can update Flash from here

• Want to 750-114: 10 Start button not working not properly

  When I left click on the windows icon to set up the list of programs and 10 button to bring up the apps page to start nothing happens. It started last week.

  Don2498

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on the button start Win10 is no longer working and I wanted to help.

  People with MS by pushing the Win10 updated weekly, it is not uncommon for a working PC suddenly that things stop working.

  Here, it's a simple solution, but as shown in this thread related, is not: bar of tasks/Start button not working not!-Windows 10 Forums

  All what I can say is that you work through this thread and hopefully, any of the fixes will work.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Lenovo x120e keyboard works not properly

  I have a Lenovo x120e, I bought a couple of years. Last Friday, I started to have problems with the keyboard. The first question was that the computer was save my CTRL key was pressed continuously. A single reboot did not fix this. However, by using the onscreen keyboard, I could get the computer to recognize possibly CTRL key was indeed not and my keyboard seems to work correctly again.

  However, from Sunday, I started having new problems and have not been able to solve. Specifically, the keys g and h do not work (although sometimes, if the onscreen keyboard is up as well, they will register as 5 and 6, respectively). Other keys around the Board work not (apostrophe, 5 and 6, some function keys). The on-screen keyboard works perfectly fine, as does a USB keyboard (I currently use).
  I tried the following, and none of them have helped:
  (1) virus and malware scan - nothing came (analysis complete, not just "fast")
  (2) check the performance of the equipment (an OEM utility) - no problem
  3) updated keyboard driver
  (4) uninstalled and reinstalled the keyboard driver
  5) restore to a restore point Windows before initial issue last Friday
  (6) restart in Mode safe without the attached external keyboard - same keys always had the same problems.
  So now I wonder if it's a hardware problem or a software (driver or OS) one. As I see it, my two possible options are:
  (1) If a problem with the hardware, at least try to clean and if necessary replace the keyboard
  (2) the software, wipe the computer and reinstall Windows. All my data is stored externally, while it would be annoying, is not a major issue to do this.
  I want to just make sure you choose the right course. Someone saw in which of them is most likely necessary remedy. Or if I missed a possible way to fix this without one of these last ditch effort, I would be grateful for more information.
  Thanks to you all.

  Hello Andrew,.

  I would agree that it's a hardware problem. At the same time, if you want "good" do an OS reinstall, you have nothing to lose but some time and effort.

  Kind regards

  BearPup

• device control panel works not properly. Cannot read messages about it. How can I fix this?

  Have a HP Officejet 6500 E709n, OS is Windows 7-64 bit. Control Panel on the front of the printer device does not properly. Cannot read messages of information/on it.  What is the problem?

  Certainly looks like a hardware problem (LCD going / has went wrong). At this point, I recommend you contact the support for repair or replacement.

• Synchronization of contact Bluetooth in iOS 10 works not properly

  Hello

  I have an iPhone 6 and just improved IOS to iOS 10 9.x.  Previously, during the synchronization of contacts via Bluetooth with handsfree car, type phone numbers information system (home, work, Mobile, etc.) has been transferred, allowing of whose system the car to differentiate more than a contact phone number.  In iOS 10, however, the digital type information do not seem to be transferred more so I find myself with several phone numbers for each contact with no indication of which number is mobile, which is the House, etc.

  If anyone from Apple is reading this, can you please forward to the appropriate Department?

  Thank you

  Nick

  Apple isn't here, you can be sure that they will be read by sending them feedback:

  http://www.Apple.com/feedback/iPhone.html

• Dv7 fingerprint reader works not properly

  The fingerprint on my DV7 reader works on my initial connection, but has stopped working for any other site.  Sites and pwd are all loaded, but when I access them, I don't get the opportunity to use the fingerprint reader.  The laptop is a HP Pavilion dv7 Notebook PC, product number A5F92AV with an Intel Core i7-3610QM CPU @ 2.30 GHz and running Windows 7 Home Premium 64-bit Service Pack 1.

  jcap1108,

  You might start with the following:

  If you allow your Firefox to update automatically, then Firefox may have recently updated to V31.

  Make sure you have the following settings in place: always turn on

  Firefox > file > Tools > modules > Plugins > scroll down >

  Always turn on the value SimplePass (drop down on the right)

  • Closing of Firefox
  • Close all programs
  • Restart / reboot the computer and log in

  ============================================================================

  Reference - paper Dragon:

  HP SimplePass update instructions

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!