BMR in WINRE will not restore the backup to the network drive.

Similar Questions

• Windows 7 will not recognize the dvd drive

  Windows 7 will not recognize the dvd drive, although it worked well for more than two years.  Now I can't access it to install new software.

  It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

  It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management.  If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

  What now? Is turn off the power, my only option?  What happens if it is not yet recognized after that?

  Hello

  If the drive is viable:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951

  
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

  Help with my computer of dumping

  I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

  If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

• My blackberry blackBerry smartphones will not restore my backup

  Hello

  I have a BB Storm 2 and I save a lot.

  I also use google sync to synchronize my address book and calendar.

  Last night I synces again and it failed. So I tried a few times more. Disconnection, signed back in and after a while, it worked.

  But what I did not notice until this morning that it totally screwed up my address book. Some of the contacts I have had about 75 times. And I lost most of my contacts.

  So in my gmail I lost them.

  But not a problem. I supported two days ago. But now it will not restore. It does something to my BB, it changes everything, but doesn't I want to restore. So I tried a full restore, a partial restore a different backup, turn off the BB. Everything!

  First I tried with the former office and later by the new software. It does not work.

  So help me please!

  (If my English is strange, I'm from the Netherlands...)

  When you say a partial restore do you mean that you tried to restore all the address book? If this is the case, you can try clear the address book database, and then perform a hard reset on your device by removing the battery for a few seconds and replace, then try to restore the address book from the backup file

• My Windows 7 computer will not find the networks wireless after a system restore.

  My Windows 7 computer is not find wireless networks after I did a system restore. It was perfectly good wifi before the system restore and other members of my family have a great connection except me is not a problem with my router. I think I know what the problem is, but I just don't know how to fix it. So there you go. I did my restore system about 2 days after that we moved on the provider of internet/tv "Comcast" to the tv/internet provider "Verizon". what I think has happened, is that I restored my computer to the point when we had no Verizon so that he could not find the network. Now, since we have Comcast it won't identify this network either, so maybe some of you out there could help me. : D

  Hello Nicolas,.

  Thank you our writing about Microsoft Community.

  If your computer has a wireless network card, Windows will automatically detect the networks wireless in range of your computer.

  You may encounter network or problems of Internet in Windows for several reasons.  Some common problems that can cause these problems are:

  • A wireless network adapter switch that is not enabled

  • WEP, WPA, or WPA2 key or password security issues

  • Cables that are not connected correctly

  • Corrupt or incompatible drivers

  • Missing updates

  • Network connection settings

  • Hardware or software problems

  I would ask you to check out the troubleshooting steps provided in the articles below and check if they help you solve the issue.

  Why can't I find a wireless network?

  Wireless and wired network problems

  Here are some links to site Web de Support of Comcast, who talk about troubleshooting of XFINITY Internet connectivity issues.

  XFINITY TV App: Can't detect your XFINITY home network

  The problems of XFINITY Internet connectivity

  Hope the helps of information provided. Do we know the State of the question, so that we can help you further.

  Thank you.

• Will not restore from backup

  I just got my new iphone 6 mailed yesterday. I tried to restore from my latest backup the previous day. It begins with the progress bar and crosses all the way. When it gets to the end, an error message that says that it is impossible to restore the iphone. When you try and reselect the last backup, it then gives an error message that says that it is impossible to connect to the server. I don't know if it's a phone, icloud or IOS 10 issue.

  10 IOS problem. Several people have reported that they have talked to Apple, who said it is a bug, they know, and they're trying hard.

• System Restore will not restore the selected date, even if the date is in bold in the home

  It just says: cannot restore the selected date

  Usually, this is caused by your anti-virus program is interfering with the system restore.  Norton is especially guilty of this behavior.  Try restarting your computer in Mode without fail (repeatedly tap key the F8 key during the restart of the computer), and then perform your safe mode system restore.  When it restarts after you perform the restore, allow him to start in normal mode.

  HTH,
  JW

• Vista will not display the network icon in the Notification area.

  IM my notification area network icon disappeared, and when I go to the right click > properties > Notification area to try to solve this problem, the check box on the notification tab, because the network is grayed and I can't click on it.  Vista has done this before with the icon of power, but it seemed to resolve itself. It has been a few days and a few reboots now, however, and the problem persists. What can I do to try to solve this problem?

  Hello

  There are different ways to fix it

  read all the information on the link below

  _______________________________________________

  Try Method 3 method 1 does not apply to you

  ________________________________________________

  Method 1. :

  1. right click on the taskbar and click Properties.

  2 tab Area of Notification .

  3 check the (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area

  Method of reading 3 etc. in the link below

  How to enable or disable the Notification area system icons in Vista

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  _________________________________________________________________

  or try this

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Windows 8.1 update 1 will not optimize the C drive

  Omni 27-1210xt CTO all-in-one running Windows 8.1 update 1.  Built-in Windows defragmentation is set to optimize all readers on an automatic calendar and all drives are recognized and controlled in defragmentation Scheduler.  When optimization is executed, all drives are defragmented except for the "C" drive - it is simply ignored - and I have manually optimize the drive 'C '.

  I also have a HP lappy, 15-d030nr, also running Windows 8.1 update 1 and it has the same problem - defrag ignores the 'C' drive, but will optimize all readers.

  I tried a few third-party defrag programs and they will be defragmenting drive 'C '.  However, these programs don't recognize not all readers.

  I'm puzzled.  There is no error in the case where the spectator and CHKDSK comes up clean.  Any ideas or suggestions would be appreciated.

  Hello

  You can read this threadMS.  There are a few possibilities and work around the issue.

  I wouldn't get too worried, because the size of cache built into recent drives somewhat mitigates most performance problems.

• Remote Desktop for Mac will not use the printer driver

  On an iMac with Lion 10.7.3, I try to get an Epson ReadyPrint T20 - TM to use the Epson driver when it is connected to our server Windows 2008 R2 with DRC 2.1.1 but it keeps using a HP Color Laser Jet 2800 Series PS we have not the HP printer and I need some features in the Epson driver.

  I installed the printer on the server and removed several times without alteration. When 'Use a printer connected to the Mac' is selected in the preferences of the DRC the printer is a printer that is redirected, but the use of the driver of HP. Printing from Mac works with all the features.
  On the server, we have 3 installed roles, file, desktop Services to remote and Web server (IIS) Services
  We have tried to map the printer with an EPSONRedirect.INF file that contains the following:
  ; EPSONRedirect.INF

  ; Printer mapping file for drivers side client-side Server

  [Printers]

  "EPSON TM - T20" = "EPSON TM - T20 ReceiptJ4"
  No idea how we can fix this?
  [Transferred to the Windows forum by moderator]

  Hello

  I suggest you to post the question on the following link:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/f07d7d4a-BCCC-4c23-8BF3-c81d31937484/

• OfficeJet 6500 a: Officejet 6500 a will not recognize the network password

  I did a print wireless for years with my Officejet 6500 a and Windows 7.  I have a new computer with Windows 10 and a new router with the new network.  The printer detects the network, but he repeats to me that the password is not valid.  I used the password successfully for my phone and iPad.

  @literaturelover

  Some things to check are:

  If you have not yet done, (re) install the software feature complete for the printer:

  File name: OJ6500_E710a-f_1315 - 1.exe

• Windows Vista will not install the usb driver for kobo reader

  I am trying to configure my reader Kobo following the indications, the PC does not allow me to install a USB driver for download, I tried many times

  but it keeps blocking.

  When you connect the device Kobo try to choose 'Manage the library', so the camera gets identified:

  http://kobo.intelliresponse.com/index.jsp?requestType=NormalRequest&id=1438&source=5&question=Do%20I%20Keep%20Reading%20or%20Manage%20Library?

• New device of U2 vCenter 5.5 will not access the network

  Hello

  I just installed a new 5.5 ESXi host and on that I deployed the OVF of the original version of vCenter 5.5.  It worked, but I wanted to try the new vCenter 5.5 U2.  So, I deleted the old device of my ESXi host and deployed the OVF of Unit 5.5U2 vCenter.

  As a first step, this unit could not get a DHCP address (was the old server to the device).  I connected and run/opt/vmware/share/vami/vami_config_net and set up my gateway, IP address, host name and the DNS servers.  After you apply the configuration, I was unable to ping the new vCenter device.  A reboot didn't help.  In addition, the shell, I am unable to ping my local gateway.

  Where to resume the troubleshooting?  I did other changes to the device when it was deployed.

  Something really strange is passed to the physical card on the ESXi host - I noticed that my test Server 2003 guest was not either the ping requests.  Restart the host did not help.

  On vSwitch0, I have changed the NIC to 1000/full, had a mistake, changed to automatic, and then things trading as magically started working.

• Guest OS will not see the network

  I have a new ESXi 5 host running.  I can connect to the host with the vsphere client.  I created two geust, a Windows XP OS and a 2008 Server.  I can't get a DHCP address on one of them, when I put a static address, I cannot ping anything other than the host machine.  Can not ping gateway, DNS, etc...  Also, I don't do a ping guests from a workstation on the network.  Any help would be appreciated.  Please let me know if you need other information.

  Thank you

  Mike

  Welcome to the community,

  This is often seen with managed switches. Please ensure the security of ports (for example the office mode) is not enabled on the physical switch ports. According to the model of switch, you must configure switchport access mode and spanning tree portfast for ESXi uplink ports.

  If this is not enough, please provide details on the current configuration of the network (physical and virtual).

  André

• Could not find the network driver: PCI\VEN_14E &amp; DEV_165F &amp; SUBSYS_2133103C &amp; REV_00

  I can't find a driver for a Proliant Server network:

  PCI\VEN_14E & DEV_165F & SUBSYS_2133103C & REV_00

  Hello:

  You are missing a character description of the seller.

  However, my guess is that you need the driver there is the Broadcom NetXtreme Gigabit Ethernet card which has an ID PCI\VEN_14E4 & DEV_165F.

  If HP does not list the driver on the support page for your particular model server, here is the link to the generic drivers of the BCM for this ethernet model.

  The first or the second pilot is probably one you need (32 or 64 bit depending on the case).

  http://www.Broadcom.com/support/Ethernet-NIC-NetXtreme-i-server

  You will need to manually install the driver, because I do not think that these are executable files.