bookmarks don't work after upgrading 11.0.11

Similar Questions

• Pavilion g6-1245CE: drivers PCI and Realtek WiFi don't work after upgrading Win10

  Hi people,

  After updating the OS to Win7 x 64 to x 64 on a HP Pavilion G6 1245CE Win10, I have some difficulties with some hardware drivers. Most of the problems I could solve myself, but there are four material elements that continue to give errors, which I failed to solve by myself. These hardware problems also affect the ability to use internet (at least on WiFi) have this laptop, it is quite a big deal. I hope you can help me. I probably provide too much information below, but I think that at least the necessary information you need are there. I hope at least

  So can you help me solve the errors established below, so that I can at least use internet via WiFi again on this laptop?

  In Device Manager, I get the following errors and the info that seems worth sharing:

  Network cards--> Realtek PCIe FE Family Controller

  general tab:

  Device type: network adapters

  Manufacturer: Realtek

  Location: Bus 2 PCI, device 0, function 0

  State of the device: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  An object ID was not found in the file

  Events tab:

  Hello:

  Unfortunately, you will not get the Realtek RTL8188CE 802.11b/g/n WiFi Adapter to work on the Windows or Windows 10 8.1, so I can't help you with that.

  You can try the W10 drivers directly from the Realtek site for the ethernet controller and card reader.

  Ethernet controller... Download, unzip and run the file setup.exe from the first driver on the Web page.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Card reader (PCI device)... Download, unzip and run the file setup.exe from the first driver on the Web page.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Because the wireless cannot work on W10, you may want to roll back to W7 in the 30 day period.

• Downloaded adobe shockwave and player and now web page bookmarks don't work

  working on the ning site and has been invited to download plugins
  Shockwave Flash Player: install_flashplayer11x32_mssd_aaa_aih
  drive: install_reader11_uk_mssd_aaa_aih
  and now web page bookmarks don't work in IE, Firefox and chrome.

  What should do?

  It seems that I did not properly create anchors

  for some reason any it worked then after that upgrades the ID for anchors have been interpreted is no longer.
  After checking a different machine, I found that the links were broken there also - something I should have checked earlier

  I reinserted new "a href ="and 'a name =' and all is well again.

  Thank you for your support

• I have Acrobat 7.0 upgrade 7.1.4 which surprising no longer works after upgrading my mac os

  I have Acrobat 7.0 upgrade surprising 7.1.4 is no longer works after upgrading my operating system mac OS 10.8.5 (mountain lion), which gives an err message that system supports more PPc applications. I guess that Acrobat 7 is a PPc application and I wanted to know if there is no work here to be able to continue to use this product? I don't see this entry.

  Yes. The feature, called Rosetta, let the Intel Macs that use execute code written for PPC. Software not hardware. He was quietly abandoned. Maybe a Lion.

• Projector does not work after upgrade from Sierra

  My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

  Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

• Pavilion slimline s5-1014: CD rom is not working after upgrade Windows 10

  My Cd rom no longer works after upgrade to windows 10.  I read the posts that I should go to Device Manager to update, however it doesn't appear in the device driver.  How to solve this problem?

  Thank you

  Hello:

  Try the steps listed in 4 of the resolution on the link below...

  https://support.Microsoft.com/en-us/KB/314060

• Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

  My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

  Hey Buddy,

  What does it mean exactly when you say he won t work?
  You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

  At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

• HP Laserjet 2100 does not work after upgrade Windows 10

  HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...

  Thank you!

  If the printer is connected using a parallel printer cable, please see the link below for the solution.

  http://h30434.www3.HP.com/T5/LaserJet-printing/possible-solution-to-LPT-port-issues-with-Windows-10-upgrade/TD-p/5372582

• Acer Aspire M5-481TG - card reader does not work after upgrade to Windows 10

  Hey!

  I can't get my card reader works after upgrade to windows 10 64-bit...

  Device Manager gives me return error Code 48, tried to install different drivers, I have found for Realtek PCIE Card Reader... None of them work...

  "Code 48: the software for this device has been blocked from starting because it is known to have problems with Windows.

  Have you ever tried the Realtek website?

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  Please uninstall the driver installed before installing this, on right click Device Manager, choose uninstall, and check the box uninstall the software too.

• Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

  Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

  My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

  Hello

  Method 1.
  Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
  http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

  I suggest updating all your drivers from the link above and drivers Realtek especially.

  Method 2. Set the default Microphone.

  Once the drivers installed to check if the microphone is the default value, here's how:

  Exercise the functions mentioned below to adjust the Microphone as default:
  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. turn highlighted that Microphone and click "set as default".
   
  For more information see the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• VMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10 - known issue?

  Hello

  I upgraded the PC host, but also virtual machines to Windows Pro 10.

  TheVMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10...

  Is this a known issue?

  Thank you!

  Kind regards

  Joe

  SOLVED!

  
  

  I uninstalled VMware Player, including the abolition of the configuration files.

  
  

  re-installed VMware Player and it worked!

• The lightning no longer works after upgrade to 45.2.0

  After upgrade of tuberculosis at 45.2.0, the Lightning has stopped working. There is more no sidebar on the right side of the window of TB, and no timetable is on the menu entries. Update version 4.7 Lightning has not changed the situation.

  The platform is Windows 7, 64-bit.

  Since he asked in another question on this topic, a screenshot of the Add-ons Manager is already determined.

  Because it no longer works after upgrade from TB. See the title.

  In any case, I Meanwhile downgraded TB once and once again, updated that solved the problem.

• Full screen does not work after upgrade; OSX hangs

  Immediately after the upgrade later El Capitan in Sierra, full function display has stopped working at the end of a disastrous. Not only can I not enter or exit the mode full screen on any application (Safari, iBooks, Terminal, etc.), but in addition, I can't event begin any application which was mode full screen before upgrade (essentially all other applications that I use on my mac). Nor can I drag-finger-three to any application full screen. OSX just hangs and displays the login screen as it has not started.

  Indeed, my mac is useless now, I can't do anything with it. I tried to restart the PRAM, has tried to repair my disk, tried various 'normal' things, which none worked. Can someone help me with this?

  Hello konkere,.
  Thank you for using communities of Apple Support.

  If I understand your message that after upgrade to macOS Sierra as your MacBook Pro doesn't work well for you. I know how it is important for your MacBook Pro to be in place and functional after the software update. Reset the PRAM and repair the disk are key steps in troubleshooting. I also recommend reinstall macOS Sierra of OS X Recovery.

  How to reinstall OS X
  

  OS X can be installed on the same version or an earlier version of Mac OS X, without deleting your data. You don't need to remove or disable the existing system first.

  1. Start of OS X Recovery now command-r immediately after start-up or that you restart your Mac. Release the keys when you see the Apple logo. Start-up is finished when you see the OS X Utilities window.
  2. If you do not want to wipe your drive before reinstalling OS X, open utility disk in OS X Utilities window, then use disk utility to erase the drive. Quit disk utility when done.
     Erase the disc is not necessary unless you're your Mac transfer to a new owner, partitioning your drive for use with Boot Camp, or attempt to solve a problem this as disk utility can't repair.
  3. Choose to reinstall OS X OS X Utilities window, and then follow the instructions on the screen.
     This installs the latest version of Mac OS X, which has already been installed on your Mac.

  Best regards.