Boolean text of multiple buttons

Similar Questions

• How to create a custom control for a button where the look apply to everyone else but not the Boolean text?

  Hi all

  I would like to create a button custom as a master, so that if I change the look of the master all other buttons are changed.

  I did it with a custom control, such as a 'type strict def' otherwise the look will change , BUT if I do this as a strict type def I can't change the Boolean text more which should be different on each button.

  How to create a master control of a button where the look apply to everyone else but not the Boolean text?

  Steve Chandler wrote:

  I don't think that you can do. I just looked and as I suspected the Boolean property text is read only for strict typedefs, you cannot use the nodes property to change the text.

  As a just solution make it a typedef. When you want to change the open look the typedef and strict rendering, make your changes, then make no strict again. You will need to update the text Boolean yet once for all instances. Kind of pain. This is perhaps something for the exchange of ideas.

  Alternatively, remove Boolean text and replace with legend

• Selectively underline character to the Boolean text

  I am full of unusual requests lately...

  Here goes...

  I need to be able to highlight a single letter of the text Boolean a button.

  For example if the Boolean text is Select, I would stress the S in Selected. Maybe 'fat' he too.

  I thought about the legend, but if I overlay on top of the switch, it hampers the functionality (obstructing the button).

  There's no place to fit the legend (or label) next to the button itself.

  Any suggestions?

  Thank you.

  
  

• Boolean text disappeared after the creation of the exe

  Hello!!!

  Deploy an exe of a National Instruments touch panel touch panel. The exe contains a value Boolean LED indicator which is supposed to is set to display the Boolean text (multiple string function is also checked). However this function does not work it means that boolean works properly but no text is visible. If anyone can help with this?

  Thanks in advance

  Good morning thorfano,

  I happened to notice that none of your Boolean texts are on the indicator, while mine are.  If you move your boolean text on the indicator or simply right click the indicator and choose "Text" lock at the Center, you should be able to review your text.

  A variant of this bug has been reported to R &D; I am trying to add this specific case to our documentation.  I apologize for any inconvenience this issue may cause you and hope that the solution to moving your boolean text is acceptable.

• Text on the buttons labels have disappeared, and the legs went above the address bar. Why?

  Last night, I've updated for Firefox 29.0.1. Now, I don't mind not change - and reworks - doesn't bother me but I HATE it when the options are removed. I want text labels on buttons (the ' Home' button, for example"). In the previous version of Firefox, you can click in the gray area at the top right and select "Customize". From there, you could drag and drop of what things you want to appear in your toolbar or not - and there is a check box for Select if you wanted the labels of text appears under them or not. Now as hard as I look, I can not find this option. So you're now forcing people to use ONLY icons. I hate this. My brain processes the word 'Home' much more quickly that it recognizes a bit the image of a House. You must understand that people act in different ways - and all simply because the developers of Firefox can not personally use text labels, which does not mean that person only!

  What is the point in removing the option? Not at all. Please re - introduce the option. In the meantime, I'll be back to the previous version of Firefox.

  In addition, I see that the tabs are now moved on top of the address bar. New - WHY? I love them below. Why do you feel the need to make changes - and then not giving people the ability to customize things how they like?

  You can watch the classic extension theme restaurateur restore some features that has been lost with the arrival of the Australis style in Firefox 29.

  • Restorer of classic theme: https://addons.mozilla.org/firefox/addon/classicthemerestorer/

  You can check the settings of the extension of the CTR through the Options/preferences button on the page "Firefox/tools > Modules > Extensions.

  See also:

  • https://support.Mozilla.org/KB/how-to-make-new-Firefox-look-like-old-Firefox
  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox
  • https://support.Mozilla.org/KB/learn-more-about-the-design-of-new-Firefox

• missing text in the button Delete the bookmark.

  There is missing text in the button Delete the bookmark. The key works but the text is missing.

  Here is a screenshot of the problem:
  http://Tinypic.com/view.php?pic=dltkau & s = 8 #. U0rV96KrFEM

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Boolean text in table

  Hello

  I wonder if there is a much easier way to do it.  Basically I have a few Boolean checkboxes associated frequencies.  If the user wants to test the frequency, then they can check box.  I need to take these frequencies and put them in a table.  The example I show has only 3 frequencies.  However, the real program a lot more.  Y at - it a faster way to get the Boolean text label in order to convert the label in a frequency table.

  Thank you.

  Put only the frequency selected in the table, you can do as in the VI attached.

  Ben

• How to read a stock of Boolean Boolean text?

  Hi all

  I had the help of the forum to read the label, Boolean or a legend given Boolean check or tick. But in my project I have to read Boolean text only. There are about 40 option and that I'll never choose, its Boolean text must be read.

  My project is on that I should read excel file all the names, and these names must text Boolean and who ever has is selected from the list with the name that the file should be saved. So why should I read Boolean text only. As at runtime, I can't change the Boolean label or legend so when reading excel I can edit Boolean text and read it.

  I enclose the my code to read from excel and give those names to check Boolean. Further, I need save the file with this name only.

  Thanks in advance

  Pals

  Does that help?  I'm not sure I understand your question.

• text in my buttons disappeared!

  Hi, today I work normally then I restarted my computer after installation of silver light and suddenly, all the text on the button has disappeared! I don't know why, but I thought it was clear money I have it removed but it seems nothing :(

  then I was using zune theme I changed it to the normal xp theme and I had half of the sorting problem but I still have the problem in some areas to help?

  Here I want to say that there is no text on the buttons:

  http://i33.Tinypic.com/29auuck.jpg

  Hello xAbd0o

  Start in Safe Mode screen Options (the one with the last good Configuration known to this topic) by pressing F8 at startup upwards again and choose

  "Safe mode with command prompt.

  At the command prompt, type

  C:\Windows\system32\restore\rstrui.exe

  Choose a Restore Point before this all started

  http://bertk.MVPs.org/

  .

• Get the text of a button values

  Hi all

  I was wondering if there is a way, if a button is pressed, to capture the text of the button that has been pressed in the method fieldChanged at all?

  If your class does not extend ButtonField, of course then try to cast ButtonField throws a ClassCastException at you.

  If you use the code from this link, you must provide a method to make the code expose the text attribute, then call that instead.

• can anyone provide a link to insert the image with the text on the button in the apex 4.2.6

  can anyone provide a link to insert the image with the text on the button in the apex 4.2.6

  ReemaPuri wrote:

  in the workspace image:-resign.jpeg

  

  As a button? Seriously?

  Ok. First of all, because the image already contains text, there no point in including the same wording in the form of text on the button. Accessibility requirements can be met using re-sign as alternative text. 4.2, create an image button:

  Tag/Alt text: Re-sign

  Static ID: re - sign

  Style button: Image

  Button Image: & WORKSPACE_IMAGES.resign.jpeg

  To make the image looks more like a button, add the following CSS to Inline CSS property page:

  #re-sign img {
    margin: 0 2px 2px 0;
    border: 2px outset;
    border-radius: 4px;
  }
  #re-sign img:active {
    margin: 2px 0 0 2px;
    border: 2px inset;
    border-radius: 4px;
  }
  

  Finally, there is a bug in 4.2 that generates the incorrect URL for the button images, which requires dynamic action of Page Load to fix.

  Event: Loading the page

  Action: Run the JavaScript Code

  Code

  var resignImg = $("#re-sign img");
  resignImg.attr("src", resignImg.attr("src").replace("/i/", ""));
  

• Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Hello

  2796614 wrote:

  Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Of course, it is possible.  According to what the text file looks like to, you can create an external table that treats the text file as if it were a table.  Otherwise, you can always read the file in PL/SQL, using the utl_file package and INSERT of PL/SQL commands.

  You have problems whatever you wantt?  If so, your zip code and explain what the problem is.

  Whenever you have any questions, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the exact results you want from these data, so that people who want to help you can recreate the problem and test their ideas.  In this case, also post a small sample of the text involved file.

  If you ask about a DML operation, such as INSERT, then INSERT statements, you post should show what looks like the tables before the DML, and the results will be the content of the table changed after the DML.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

• I have a problem with the resolution of the text of the button send the form

  I have the problem that the text of the button send in my form is pixelated version of the phone. I dind't placed an img in button. The text and the rectangle is generated in muse. If I create a rectangle with text in the scia, even for the version of the phone, there no pxilated.

  Then why get the button send pixilated with the same settings.

  I am very happy if someone can help me.

  Hi, I had the same problem, and because the design is very important to me, I solve it by cheating a bit :)

  You can see in my form here: http://lemarket.cz/prezentace2016prodejci.html#slide12

  I have a form button with no fill style, no color, no text for all States.

  I have inserted my button in the form (I put size and rounded corners in the same way that the button on the form ).

  The only problem is, that the State of your button does not work / because it's under another layer.

  But that I realize, that I can set for original form button rollover State / with an opacity of 10%, it will be possible to see my button below, just the color changes and it now works together :)

  I know that's not technically correct, but it works... for the design

  Elena

• Text on the button changes to the overview

  I copied a button with Slide text to B slide and change the text of the button on slide B.

  After the publication, if I move the cursor over the Slide b button, it changes the original text (from the slide A button).

  Is there a way to avoid this? This behavior is not normal at all.

  -Peter

  In fact, it can be quite normal.

  Check the display of the State of this button.  You can see that the State Over text should be changed to be in harmony with the Normal State, and what is your 'problem '.

• When using the 'tools', 'Interactive objects', 'Add a button', how to make the text for the button name is displayed? I have tried everything and only the background, or lacxk, appears.

  I created a pdf document using Adobe Acrobat XI base and want to put a link on each page, return to the table of contents. However, the tool "Add a link" I cannot place this link on each page at a time. Accordingly, I used the tool 'Add a button' interactive Actions that allows me to do what I want. However, when I enter the name of the button, add background color (or not) and register, the name of the text for the button does not show, only the background appears (or nothing if I select no background). The button works, it just is not labeled. Any help will be appreciated.

  This is the area of the label, under Properties - Options.

  The game, 23:02, charlesc90551452, [email protected] , 14 may 2015