Boot HDD fail / change

Similar Questions

• P850 satellite - failure with the recovery partition - boot selection failed

  Hello Hello,

  My problem is this: a few days ago, I update Windows and slow start is not blocked after several days decided to put the factory, always try to blur this back to the factory and is more, let me not to recognize the recovery partition, I created with Media Creator of recovery disks, but aren't working doesn't let me use me I get the following error :
  Cannot start Windows, a recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language setting and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact the manufacturer administratos or your system's computer.

  Status: 0xc000000e

  Info: the boot selection failed because a required device is not accessible.

  I tried a thousand ways to access the partition recovery but not detected the remains because some program I can see active that turn it off, which is hidden, but still missing and I can't boot from the partition, I gave me a CD of Windows 7, I formatted the hard drive partition, that you and I have reinstalled again but driver Toshiba the problem is that the recovery partition is still but I can not access the recovery discs are not me, work, when I go to see the Recovery Console:
  * Startup Repair
  * System restore
  * Restore
  * Tool of Diagnoctic memory of Windows
  * Command line

  Hello Hello, my problem is this: a few days ago, I update Windows and slow start is not blocked after several days decided to put the factory, always try to blur this back to the factory and is more, let me not to recognize the recovery partition, I created with Media Creator of recovery disks, but aren't working doesn't let me use me I get the following error :

  Cannot start Windows, a recent hardware or software change might be the cause. To solve the problem: *.

  1. Insert your windows installation disc and restart your computer

  2. choose your language setting and then click "next". *

  3. click on "Repair your computer." *

  If you do not have this disk, contact the manufacturer of your system administratos or computer for assistance.*

  Status: 0xc000000e *.
  Info: the boot selection failed because a required device is inaccessible.*

  I tried a thousand ways to access the partition recovery but not detected the remains because some program I can see active that turn it off, which is hidden, but still missing and I can't boot from the partition, I gave me a CD of Windows 7, I formatted the hard drive partition, that you and I have reinstalled again but driver Toshiba the problem is that the recovery partition is still but I can not access the recovery discs are not my work.

  Recovery Console has these options:
  option 1: Startup Repair.
  Option 2: System Restore.
  Option 3: image retrieval system.
  Option 4: Windows Memory Diagnostic.
  Option 5: command prompt

• the boot selection failed because a required device is not accessible

  Hello

  I give my 15 years old nephew an old laptop so I am trying to run a system recovery and restore it to its original state factory.

  As soon as I clicked on Recovery Manager > System Recovery > restore to their original factory condition, I get a screen with this message Windows Boot Manager:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer. (don't have)

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  If you do not have this disc contact the Adminitrator's manufacturer or a computer in your system.

  Status: Oxc0000225

  Info: The boot selection failed because a required device is not accessible.

  Is there a way to get around this. I would get to it as soon as possible, but I want to wipe all my info beforehand.

  Thank you!

  Karen

  try to perform the recovery by using the partition.  boot f11 and recovery manager must take over. If not, or if the process does not finish successfully, perform a large hard drive. If the test successfully you will need to order a copy of your HP recovery disk.

  as an alternative, you can create a new admin account and simply delete your existing account after.

  hope this helps

• "0xc000000f the boot selection failed because a required device is not accessible."

  "0xc000000f the boot selection failed because a required device is not accessible" I'm not able to use the installation disc that my CD/DVD drive has failed. Is there a way to create a bootable via a USB disk and the PC started?

  Windows Vista.

  Hi Anand,

  The error "0xc000000f the boot selection failed because a required device is not accessible" is related to the error in the hard drive that is required to start.

  Steps to create a bootable USB stick with Windows 7

  As the CD/DVD drive does not work, you can create a bootable USB drive using which you can repair this problem.

  Before you create the bootable USB key with Windows 7, you can download Windows 7 from the link

  provided below.

  http://www.microsoftstore.com/store/msusa/en_US/PDP/ProductID.253735200

  Use the Windows 7 USB/DVD tool to create a USB bootable with Windows 7.

  Here is the link that will help you to create a bootable USB.

  WINDOWS 7 USB / DVD DOWNLOAD TOOL

  Steps to fix the problem with the error code

  After you create the bootable USB key with Windows 7 you can insert it in the boot of the computer, and then press F12 to go to the boot window priority and change the priority of Boot on USB.

  a. After you change Boot priority on USB that is usually at the last, the computer will boot using the USB and it will take you to the page where in the GUI (Graphical User Interface), it will display the install now option.

  b. here you must select fix you the computer from the bottom left.

  c. This will take you to the WINRE (Windows Recovery Environment) window that offers different options

  d to fix problems with Windows.

  e. in WINRE, select the option that reads the command prompt and type the following command.

   

  Chkdsk /f /r

   

  Note:

  The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

   

   

  It will be useful.

• HP 2000-329WM laptop: could not start error Info: the boot selection failed because a required device is not accessible.

  Hello. First when I started my computer this is a white screen. After doing a hard a reboot screen pop up saying:

  Windows could not start. A recent hardware or software change might be the cause.

  He told me to insert your windows installation disc (which I did not).

  He also says

  Status: 0xc000000f

  Info: The boot selection failed because a required device is not accessible.

  Whenever I try to boot normally, it wouldn't let me.

  Hello

  You can use a repair disc. To obtain a repair disc, find someone with the 32-bit Windows 7 computer and create a system repair disk to repair your problem.

  This link will help you...

  http://maximumpcguides.com/Windows-7/create-a-Windows-7-system-repair-disc/

  Checkurtech

• Windows is not booting - recent hardware change

  Hi guys,.

  I have an imac 21.5 2011 mid running el capitan (10.11.6)

  In this imac, I have a bootcamp partition (windows 7) that used to work fine until I tried to resize the partition.
  To resize, I used the Mac os disk utility to free up the space in the osx partition and used minitool partition Wizard on the side windows 7 back this free size.

  Therefore, seems to be bcd windows was broken and I can't start windows more.

  I tried:

  • following this subject: no boot after device changed partitions
  • try to do a bootcamp-> could not start him even usb key using down option (only macos, bootcamp and recovery disks available)

  I saved the bootcamp partition (copy of files and also do a dump of R/W dmg from it)

  What can I do now?
  I can't use windows recovery options that I had set on pc because it does not start on the key.

  Could you help her?

  Thank you very much.

  You need a W7 DVD to boot from and repair Windows. For the record, terminal of OSX, please after the release of

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  Orders 'sudo' will ask for your password.

• Presario CQ61-312SA boot selection failed because a required device is inaccessible

  I get the message "boot selection failed because a required device is unreachable" on my computer laptop presario CQ61-312SA. I don't have the CD containing the disks but I do not have a premium Windows 7, 32 and 64-bit family OS disk. I tried to restore to former factory settings using f11 which does not reach 50%.

  Hello

  As I see that the hard drive on your unit has failed you need to replace the hard drive, then reinstall the operating system on your device then only unit will return to operational status.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• Startup Repair fails, the boot selection failed because a required device is not accessible.

  Hello all,.

  I have windows 7 Home premium 64-bit on dell PCs.  I lost power then in the middle of the update to windows 10.  Now, I'm stuck on the windows Boot Manager screen and the windows error recovery screen.  When asked ¨launch startup repair, ¨I get then message ¨the boot selection failed because a required device is not accessible. ¨ When asked ¨start windows normally, ¨I get same selection boot error message.  I have my disc to install windows 7 HP, but I can't get the pc able to read the disc.  I tried the key windows and ¨r¨to get a prompt to read the disk, but it does not work.  I tried the hard stop pressing the start for 10 sec button, but it does not restart the computer.  I unplugged the computer in hopes that it would help restart, but this doesn´t work.  I am stuck in windows boot manager purgatory - Help!

  Hello

  I would like to know some information about the problem so that we can help you better.

  What is the model number of your Dell computer?

  Thank you for details on the question and your efforts to resolve.

  I also know that the inconvenience that you are experiencing due to problem starting Windows. I will definitely help you.

  This problem may occur because of damaged or missing Windows startup files. This can also occur due to damaged MBR (Master Boot Record).

  I suggest you use the bootrec.exe tool and check if that helps.
  Refer to this article:
  Use Bootrec.exe in the WINRE to resolve startup problems
  https://support.Microsoft.com/en-us/KB/927392

  You can create the Windows 7 installation media using this link.
  Reference:
  https://www.Microsoft.com/en-us/software-download/Windows7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• No boot device after changing the partitions

  Hi all. I've lost the ability to start in my Windows partition through bootcamp. When I use startup disk system prefs. OSX, he can see Bootcamp, but rebooting produces an error message "no boot device." If I hold the alt key while rebooting, I can only see the Macintosh HD, without bootcamp (or recovery, by the way). I can see the Bootcamp drive on the desktop, so I can use Parallels to run Windows based on this drive, I know that the drive itself is ok.

  I did a fair bit of mucking partitions. I decreased my Macintosh HD partition and inserted a new Macintosh HD and Bootcamp. Then, things are funky, and I created a volume of CoreStorage on top of Macintosh HD and it is associated with a partition on an SD card (created a fusion DIY with a TarDiskreader). All this worked fine and I now had a huge hard drive Macintosh and boots fine Mac, Parallels works fine, but I can't start natively in Bootcamp.

  Can someone help, please?

  Here is the output of "distill the list:

  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.3 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:          Apple_CoreStorage Macintosh HD            279.8 GB   disk0s2
     3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
     4:                  Apple_HFS Untitled                20.5 GB    disk0s4
     5:       Microsoft Basic Data BOOTCAMP                199.4 GB   disk0s5
  /dev/disk1 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *255.9 GB   disk1
     1:                        EFI EFI                     209.7 MB   disk1s1
     2:                  Apple_HFS TarDiskFirst            309.0 MB   disk1s2
     3:          Apple_CoreStorage Macintosh HD            199.8 GB   disk1s3
     4:                 Apple_Boot Boot OS X               134.2 MB   disk1s4
     5:                  Apple_HFS WinData                 55.2 GB    disk1s5
  /dev/disk2 (internal, virtual):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:                  Apple_HFS Macintosh HD           +479.0 GB   disk2
                                   Logical Volume on disk0s2, disk1s3
                                   663FCC6B-F913-4137-B61C-9A318FF32328
                                   Unencrypted
  

  And 'sudo disk/dev/disk0:

  GPT fdisk (gdisk) version 1.0.1
  
  Warning: Devices opened with shared lock will not have their
  partition table automatically reloaded!
  NOTE: Write test failed with error number 1. It will be impossible to save
  changes to this disk's partition table!
  You may need to deactivate System Integrity Protection to use this program. See
  https://www.quora.com/How-do-I-turn-off-the-rootless-in-OS-X-El-Capitan-10-11
  for more information.
  
  Partition table scan:
    MBR: protective
    BSD: not present
    APM: not present
    GPT: present
  
  Found valid GPT with protective MBR; using GPT.
  
  Command (? for help): p
  Disk /dev/disk0: 977105060 sectors, 465.9 GiB
  Logical sector size: 512 bytes
  Disk identifier (GUID): 918541C4-E232-154C-BC98-413BDA1DBBCC
  Partition table holds up to 128 entries
  First usable sector is 34, last usable sector is 977105026
  Partitions will be aligned on 8-sector boundaries
  Total free space is 262288 sectors (128.1 MiB)
  
  Number  Start (sector)    End (sector)  Size       Code  Name
     1              40          409639   200.0 MiB   EF00  EFI System Partition
     2          409640       546975591   260.6 GiB   AF05  Macintosh HD
     3       546975592       547237735   128.0 MiB   AB00  Booter
     4       547237736       587356159   19.1 GiB    AF00  Untitled
     5       587618304       977104888   185.7 GiB   0700
  

• After update of Windows 7 with the last KB 'Reliability' updates, wouldn't Boot: Boot mgr failed, cannot find the OS loader

  After that update of Windows 7 with 5 ~ updates which mainly provided increased reliability, these KBs wound up loader of Windows BOOT OS/corrupt the rupture.

  Root cause found:
  ----------------------
  Boot Manager cannot find the OS loader

  Repair action: repair of files
  Result: failed. Error code = 0xa<---- next="" repair,="" this="" changes="" to="">
  Time taken = 4206 ms

  Repair action: repair store boot configuration data
  Result: Has no = 0 error code x 490
  Time taken = 221 ms

  Repair action: System Restore
  Result: Completed successfully. Error code = 0 x 0
  Setting time = ms 44444

  How to search through my hard drive to find updates KB which is the origin of my computer to lose its bootloader/OS and not starting?  What KB update is initially the charger operating system not found when everything worked very well, before these 5 updates.

  What are the solutions?

  Try the Forum updated; It includes questions of XP, Vista and Windows 7 update:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite C850D-104 - no boot HDD, no WEIRD boot, black screen

  Hi all

  I had a laptop Toshiba C850D-140, purchased approximately one to two years. I decided to reinstall Windows 7 and I started the whole process. Everything was good, the "expanding windows files" ball, completed successfully, then the laptop restarts automatically. Then the problems started.

  No Toshiba logo came, only a line of underscore in the top left corner, not flashing, wearing just here. After about two seconds, the system rebooted and underscore appeared. This process in a loop forever. I can enter the BIOS menu, I can get into boot menu list, but the problem is that the laptop cannot boot from any device. HARD, no USB or DVD disc. The DVD contains Windows 7 genuine, working and tested on other PC but the laptop refuses to boot from it.

  Any ideas?
  Consistent thanks

  To my knowledge, underscore flashing means a HARD drive problem.
  But you said, underscore does not blink but his lie.

  In some cases, this could mean the RAM to malfunction. However, this is just an idea.

  Question: do you have set the default BIOS? In the BIOS, press F9 to get the default settings and press F10 to save.

  HARD drive appears on the first page of BIOS (HDD name, size,)?
  If this isn't the case, it means that the HARD drive is faulty.

• My installation of Windows 8 via Boot Camp fails continuously

  I use a MacBook Air, early 2015, 13 inches. I am looking to re - install Windows 8.1 on a Windows via Boot Camp partition.  I have already completed this process with success, however, this time I have continue to spread the message that Windows Setup has failed.  No error number is included.  Boot Camp then cancels the partition that it has already completed and the process ends.  Do you have suggestions as to how I can get this installation to work?

  Can you boot Mac OSX Safe mode - try safe mode if your Mac does not commissioning - Apple support - and then start normally and restart the wizard of BC?

• Windows Boot Manager failed error

  NB: I have a very short time. her tomorrow. I have a very glitchy w4 Iconia, who has been with us for a day and night, with several screen flickers and this problem I am submitting. Boot Manager Windows failed to start my iconia, which means I can't even swtich it took off. After two other messages come iup which are almost the same, the message: "Default Boot Device missing or startup failed. Insert the recovery media and press a button, then select "Boot Manager" to choose a new device Boot or Boot Recovery Media. "The two Previos are"1. Windows Boot Manager start failed. "and"failed to initialize the Windows Boot Manager. "I'm experienced in it so I know that something has gone wrong with the boot process, so nothing else running this error start freaking program other some other starnge treats that i have no knowledge of. the next screen that is displayed after the third popup says

  Menu Option to start 1. Manager start Windows ESC to exit

  Bluetooth doesn't seem to be running so im stuck with by clicking on windows boot manager which throws me through this lopp everywhere again. Ive plugged my tablet on my computer but it doent seem to be recognized as a disconnected device.ive it in fear of this charge as the race to the bottom of the stack seemed work very well on my mini ipad when it gopt stuck in a screen.i gel do not think the iconia will start correctly after he sinks since I don't have any medium of recovery and I have a deadline. that is tomorrow morning. knowing that the iconia has a max of 9 hours batterylife, I'm sure the battery rundown will work. Please advice cocoralie knowledge. If you are bored to my typos, please llok in my entry in the welcome forums.

  Hurtling down the battery seems to have solved the problem! Works great! No I don't think that there is a malicious, just stuff software in the code.

• Name: 700-430qe # J6N60AV #ABA: HDD - failed - U0BW6X-7HW84L-QFFWL1 - 60B 303

  Hello

  My computer has just started missing today, and when I run the diagnostic tool, it is the failure of ID I get:

  Failed hard drive - U0BW6X-7HW84L-QFFWL1 - 60B 303

  Any help will be appreciated.

  Hello
  
  Unfortunately to say: most of the time the 24 tank failure id indicates the drive is defective and must be replaced. It is still under warranry? In the affirmative, please call HP for a replacement.
  
  In the United States:
  
  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1
  
  or the HP technical support: 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.
  
  http://welcome.HP.com/country/W1/en/contact_us.html
  
  Kind regards.

• Satellite P300D - first time in Win XP boot is fail when put on

  Hello:

  I reinstalled my friend computer laptop P300D from vista to Windows XP, I found a problem that can not boot in OS in the first time, when I turn on.
  So I forced to turn off and turn on again, and it can then boot in WinXP

  I installed all the drivers there need, what can I do?

  Should I update the latest version of BIOS to fix this?
  Now the BIOS version is 2.3

  Hello

  You mean that this problem still occurs when you try to power the laptop for the first time?
  What happens exactly? Do you get any error messages?

  > Should I update the latest version of BIOS to fix this? Now the BIOS version is 2.3
  Well, you can try to install the latest version of the BIOS but I'm not sure if this will help you to check it out and we'll see