Satellite P300D - first time in Win XP boot is fail when put on

Similar Questions

• I'm new to Lightroom, but when it's open for the first time today, I imported my images, but when I view in the develop module, they will look almost like an inverse emulsion, or as they display the colors of the histogram. The preview image is fine and i

  

  First suggestion is to go to your Lightroom preferences, performance tab, clear the use of the graphics processor. So, let us know if that fixes the problem.

• Satellite P300D - 15 c is very slow to start WMI

  Hello

  My pc (Satellite P300D - 15 c) is very slow at startup.
  When I look in the newspaper, there is a WMI wich tooks 2 minutes East service delivered with an error.

  After that, my pc on the screen fr jumps 'welcom' starts normally.

  So I turn the WMI service, but that there are other mistakes after the full boot (tosipcsrv.exe close).

  Is there another type of solution, except turn the WMI service?

  Sorry for my bad English,
  If you can answer me in Dutch or English basic ;-)
  With sincere friendships.

  Johan Nijsse

  Here's the (Dutch) log of the WMI problem:

  Logboeknaam: Application
  Bron: Microsoft-Windows-WMI
  Reference: 2009-04-06 22:52:53
  Gebeurtenis-id: 10
  Taakcategorie: Geen
  Level: who cares
  Trefwoorden: Klassiek
  Gebruiker: Derby
  Computer: PC_Fam_Nijsse
  Description:
  Gebeurtenisfilter met query SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99 kan niet worden van naamruimte //./root/CIMV2 vanwege opnieuw doing 0 x 80041003. Mogelijk worden er geen gebeurtenissen via said thing totdat het clean filter is corners.
  Gebeurtenis-XML:
  
  
  
  10
  0
  2
  0
  0
  0 x 80000000000000
  
  1961
  
  
  Application
  PC_Fam_Nijsse
  
  
  
  ./root/CIMV2
  SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99
  0 x 80041003
  
  

  Very good thread on slow start up you will find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947

  It will be interesting for you.

• Sound is played at the first time when it is called by VI

  Hi, I am creating a VI that creates bursts of noise of specific terms in the sequences. My problem is that the sound generation VI only plays the sound the first time it is called. I tried to put VI in a for loop to see if I can get to play several times, but no matter what I do it plays only generated sound once.

  I found the problem. Thank you. The problem was with the timer not reset in the loop (it fixed with a shift register) on second or other calls. Thus, the loop was ignored that the timer has been greater than the value specified after the first time through the loop.

• Satellite A200 BSOD would be the first time that I ever ran Win Update

  Hi all

  I have a Satellite Pro A200 running professional Vista that I bought on October 11, 2007. Win Update never ran the first time, had the laptop then BSOD. I recovered using the recovery CD, and since then, I've left Win Update turned off.

  Someone else with a similar machine did this happen to them?

  Does anyone know what causes this?

  What would be the Toshiba Support policy on this?

  Thank you all.

  What is the hex code of BSOD? (The number of 0x000000xx)

  I am looking this BSOD number to www.microsoft.com for a solution.

  Also update the BIOS of the laptop. An update of the BIOS can perform magic sometimes :)

• Satellite L500-19 X starts and loads Win 7 always like the first time

  OK, so I bought a toshiba satellite L500 - 19 X to the United Kingdom in a store called carphone warehouse.
  It came with windows 7 pre-installed.
  I wanted the 32-bit version, so he ran faster, but he had installed 64, but came with a 32-bit restore disc.

  So I went ahead and restored, now, whenever my laptop starts up, it think it's the first time and load the toshiba implemented and stats to do things then restarts.
  He could do this all day until I hit escape and complete the configuration manually.

  No one knows how to stop this or I have to buy a full version of windows 7 and start again in this way?

  Please please answer now! Thanks in advance guys :)

  Thanks for this info!

• How to set up the Satellite L500/013 for the first time?

  New laptop and the first time a brand laptop user, I was told it would be simple.
  Turn on the laptop and was invited to choose between operating 32 or 64-bit systems, and did not know which way to go and ended up choosing the 64 (not sure) if it was the right decision.

  Then came with a big warning screen saying that all information on the hard disk will be deleted.
  Totally freaked out and turned off the machine do not know if I said yes it would have to wipe my Windows 7 operating system.

  Anyway can offer advice or suggestions would be great.

  How can I get this thing going?

  Hi mate

  Don t worry not about this message.
  It s usually treat the first partition of the HARD disk is deleted if the recovery procedure should be started.

  This occurs by using the recovery disc or HARD drive recovery.
  In any case... Choose the version of Win 7 (32-bit or 64-bit), and then follow the instructions on the screen.

  Welcome them

• Satellite L650D: how long I leave it on charge for the first time?

  recently bought this computer series Toshiba Satellite L650D and I was wondering how long I leave on the royalties for the first time to power?

  Help, please

  Hello

  My laptop is still connected to the power adapter, so would always charge the battery.
  But usually the battery led turn green if the battery should be fully charged.
  Let the adapter connected until this witness would turn to green or blue (based on the model that you bought for)

• Satellite P300D 10V - drivers Win XP?

  Someone has drivers for WIn XP for Toshiba Satellite P300D 10V - at least for sound and network card?

  In fact there is no driver available, but you can use the original drivers from the manufacturers of components you requested.

  For his visit for LAN and "Conexant", visit the "Marvell".

  They work and you can use the material without needing toshiba drivers.

  Welcome them

• First time installation on Satellite L500-1XD was interrupted

  I turned on a Satellite L500-1XD for the first time this morning and during the first installation, the current was interrupted. It now takes an age to complete the installation.
  Is this normal?

  Is there something I can do?

  Thank you.
  JD

  What to say?
  One thing is clear here: power failure while the first installation runs is not normal and should not happen.
  So, now, how to tell if this is normal or not when it should not happen at all. Do you believe that none of us in the intention just to see how it works?

  Anyway, there is no other choice for you except to wait and hope that everything will be fine.
  Unlike the pre-installed recovery image is destroyed and you won't be able to install it at all.

  Please send some feedback soon.

• All new Satellite A200 turn on the first time

  I bought a Satellite A200 yesterday and can't turn it on. The power button turns on power, but the start does not start if the power light is on.

  I have to turn on and off at least three times until he decided to start.

  Is there a secret method?

  Hello

  Hmm in your case I would be to remove the battery from the laptop and unplug the power adapter.
  Wait a bit (~ 20 min), then reconnect the two parts.

  I put t know why your laptop didn't start for the first time, but I recommend this behavior of monitoring specifications.
  If this will happen again, and the more often you should contact the authorized service provider in your country to control the laptop.
  If something is wrong that the warranty should cover it.

  Good bye

• Re: Satellite P300D-20U - I can not install display driver for Win XP

  Hi all!

  I bought the laptop P300D-20U, I installed windows XP on it.
  But now I can not install the driver to display on it.

  I downloaded from this site (it's the only display driver for this laptop).
  When I install and restart, Catalyst Control Center to write me that it do not display driver support and don't launch.
  Windows loads in resolution 640 x 480 and 4-bit color.

  When I'm changing resolution or color apears black screen and nothing happens, in 20 sec it cancels.
  I tried different drivers from ati.com but nothing works :(

  SRY for my English but I hope that you will help me guys, ty

  Hello

  Satellite P300D-20U belongs to the PSPDCE series and I think that it was equipped with the chip graphics ATI Mobility Radeon HD 3470 (M82XT).

  Did you choose this series in the form of European driver of Toshiba?

  I see the Display Driver for Win XP v 8.477.

  If you can not install using the setup.exe, then you should try to install this driver in Device Manager.
  Mark (possibly marked with yellow exclamation) graphics card then choose put up-to-date driver, use the Advanced installation procedure, point to the driver files downloaded from the Toshiba page and apply.

  It should work

• I am trying to download CS on my HP Z400 running Windows 7 for the first time.  The installer won't boot.  It finally gives a "server not available" error after 30-45 minutes

  I am trying to download CS on my HP Z400 running Windows 7 for the first time.  The installer won't boot.  It finally gives a "server not available" error after 30 to 45 minutes.  I checked to be sure there is no Adobe folder in my program files.

  Hello

  Please check the help below document:

  Error download or update Adobe Creative Cloud applications

  You can also view the nets below where the issue has been addressed:

  Error 207 to "install Adobe".

  Adobe creative cloud installation does not work. Get the error code 207. All solutions?

  Kind regards

  Sheena

• Satellite Z30-A104 - the first time I try to turn on the pc do not work

  I need to press the button 'market' twice to turn on the laptot if the laptop is turned off. The first time that I press the button, I see the toshiba logo and a second later disappear and they turn out at all. The second time, I don't have any type of problem. Still it happened, any solution?

  The laptop is running windows 8 and I bought last month.

  Hello

  If Windows 8 is installed, I guess that the laptop is not to stop completely, but his game to + closed hybrid. +

  I would recommend that you do not have a full stop down as described here:

  [Perform a complete shutdown in Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm]

  Your comments would be appreciated

• How much time must be recharged Satellite Pro U200-10 b for the first time

  Hello

  How long the computer laptop Saturday Pro U200-10 b should there be for the first time?

  Kind regards
  CC

  Hi Christoph

  That s easy. You must charge the battery for laptops up to the battery LED switches to green light or blue. I put t know exactly the LED on the U200 Pro colors.

  A hint; all the details should be in the manual of the user who is always pre-installed on Toshiba laptops
  There, you will find also information about the battery and manipulation.

  Concerning