Boot partition of windows 7 64 bit as RAW device in VMware workstation 7.1

Similar Questions

• Where can I download the latest version of the Apple support for boot camp and Windows-10 64-bit software?

  Where can I download the latest version of the Apple support for boot camp and Windows-10 64-bit software?

  give me the link?

  I need the latest package driver.

  -Thank you

  Please use BC Assistant.

  

• Computer laptop Compaq PresarioCQ40 using Windows 7 32 bit. In Device Manager, I found two items with a trademark right Exclaimation beside 'Devices Bluetooth device' in the other devices section.

  My laptop Compaq PresarioCQ40 running Windows 7 32-bit. In Device Manager, I found two items with a trademark right Exclaimation beside 'Devices Bluetooth device' in the other devices section. Properties, I found that these two elements with problem are found on "Microsoft Bluetooth enumerator.  I tried to run Windows update to get the driver but it says no update available. And I can't find this driver online. Can someone help me solve this problem? Thank you very much

  Hello

  Perform the steps in the link and check.

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Hope this information helps.

• 64-bit in ESXi running in Vmware Workstation machines

  Hi all

  I have a Lenovo Thinkpad W510 with an i7 processor.

  I have Windows 7 Enterprise 64-bit as OS for my vmware Workstation 7.1.3 (64-bit), I install ESXi 4.1 as a virtual machine in my machine and now start importing the VM since my ESX datacenter (you want to use what I already create in data centre infrastruture in my laptop)

  I was very surprised, inside my ESXi 4.1 it says when I try to start a Windows Server 2008 R2 or trying to create an image of the installation CD to:

  msg.cpuid.noLongmodeQuestionFmt: this Machine vistual is configured for 64-bit systems Nailer quest. However, exploitation of 64-bit is not possible. This host does not support VT for more information, see http://vmware.com/info?id=152. Continue support 64 - bit wihout?

  Any thing I can change or change to make it work?

  Thank you

  Paulo

  You can't execute nested invited 64bits.  Autoprogramming comments any64bit hardware assisted virtualization must be enabled (VT-x/AMD-v). When you run ESX (i) as a guest, it is not possible to passdown technology.

  In conclusion, you can run 32-bit clients nested

• Host Windows system restore back up virtual machines the VMWare Workstation?

  Is it save to perform a restore of the system on a Windows host running VMWare Workstation 9.0.2 with the premises of virtual machines? I just need confirmation that the VMs will be still functional after restoring the system.

  Welcome to the community,

  System Restore should not touch all personal documents, what configuration file and virtual disk are in reality. However, a restoration of the system can change the parameters of the application Windows for for example VMware Workstation. Anyway most that should happen is that you have to reinstall VMware Workstation in such a case.

  see "what files changed during a system restore?" at http://windows.microsoft.com/en-us/windows/system-restore-faq

  In any case, it is always useful to have a current backup!

  André

• I'm trying to re - install my for windows vista 32 bit synaptics pointing device, but my device manager does not display any device and keeps bring up the keyboard to the screen as how to fix this?

  I tried to install a driver for it but I find only 64 and 86 bit drivers. Sometimes my keyboard is not typing all letters I am getting tye (type) or like this for example. Someone at - it help me fix this please. I really want to get this computer working again.

  Your keyboard might not be hitting the correct letters (typing lertters numbers) because your shift caps lock is enabled (the led is green), to disable it on a portable computer, press on the 'fn + caps lk' keys at the same time, the green light should turn off.

  Your system is 32-bit if you need marked x 86 driver (it's actually 32-bit, there is no system of 86 bit).

  For you On - Screen Keyboard, check if it is automatically configured to start whenever you open a session:

  Go to the Control Panel, easy access, less "explore all settings', click on 'Use the computer without a mouse or keyboard', click on the box in front of"Use on-screen Keyboard"to uncheck if its active.

• HP Pavilion DV4-2140us. Looking for Windows XP (32-bit) driver for Mobility Radeon HD 4000 series.

  I have a laptop HP Pavilion DV4-2140US AMD Turion II M520.  I'm looking for a Windows XP (32-bit) driver for Mobility Radeon HD 4000 series video card. I've upgraded HDD to a 1 TB hard drive and the partition for Windows XP (32 bit) power to a dual-boot between Windows 7 (64 bit) and Windows XP (32 bit).

  Hello:

  Please see if it works.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-85978-1&prodTypeId=12454&prodSeriesId=472276

  Paul

• Try to reinstall Windows 7 64 bit

  I'm trying to re - install Windows 7 64 bit on my machine. I was installing my original XP you try to upgrade with the 7 discs.  For some reason any when I put in the disk of 64 bit I get an error message saying it is incompatible, which is strange, because this machine has been using 7 (64 bit) for about three years.
  When I run the Advisor tells me 'no problem '. I installed 32 bit without problem. Even after that, when I put 64-bit disk, I always get an error message. Damaged drive?
  Help?
  Intel (r) Core (TM2 Duo CPU E7500 2.93 GHz
  RAM: 4 GB

  In order to install Windows 7 64-bit, you must boot from the disk, could not start the installation from a 32-bit version of Windows such as Windows XP.

  Boot from the Windows 7 64 BIT DVD

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• CentOS 6: / boot partition to small with Easy Install

  Hello

  I installed CentOS 6 64-bit in a version of VMware Workstation 7.14 - 385536 on Windows 7 Enterprise 64-bit. If you are using Easy Install it came with a partition/boot to ~ 48MB where are only 8.3 MB of free space. Therefore, an update of the kernel fails with the error: '[...] 19 MB required. "This happends with the default size of the drive of 20 GB and when I changed it to 40 GB.

  If I do not use Easy Install the partition/Boot has the size of 500 MB (size disc 20 and 40 GB), which would be more than enough. Another difference is the use of lvm (logical volume management) when I use the manual installation and the lack of it with Easy Install.

  Is it possible to change the partition scheme when you use Easy Install?

  Kind regards

  Andreas

  Easy install creates a custom Kickstart configuration file the autoinst.iso file created in the folder of in that the Virtual Machine is created and you must change the following setting in the KS. CFG file.

  part /boot --size 50
  

  Should extract the KS. The autoinst.iso file, change the setting and the injection of the edited KS, CFG folder. CFG file in file autoinst.iso before you begin the installation.  Or you are needs that this process can be script.

• Compaq 615 laptop - Windows 7 32 bit.

  I would change from 32-bit to 64-bit.

  Can I have a new partition with Windows 7 64 bit and still keep my Windows 7 32 bit on the old partition and would there be conflict issues?  Also, how do you change between the two partitions after installation?  This would mean that I have three partitions - old partition recovery partition HP and the new partition.

  The reason for not doing a new installation, it is I want to keep my laptop with its support and programs intact.

  Best regards, Carpy.

  No, the product codes are specific to the version of bits. For example, a 32-bit key product can be used only on Windows 32-bit and 64-bit key can be used only on a 64-bit version of Windows.

• Network and Pci peripheral controller driver needed for windows 7 64 bit

  I use HP Compaq Presario cq 57 - model 339WM laptop...

  OS - windows 7 (64-bit)

  Pci device and necessary network controller driver

  Network controller - hardware ID

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C

  PCI\VEN_10EC & DEV_8176 & CC_028000

  PCI\VEN_10EC & DEV_8176 & CC_0280

  PCI device - ID material

  PCI\VEN_10EC & DEV_5209 & SUBSYS_3672103C & REV_01

  PCI\VEN_10EC & DEV_5209 & SUBSYS_3672103C

  PCI\VEN_10EC & DEV_5209 & CC_FF0000

  PCI\VEN_10EC & DEV_5209 & CC_FF00

  PLS HELP TO INSTALL THE PROPER DRIVERS

  Hello:

  You need the driver for the hardware ID of PCI\VEN_10EC & DEV_8176:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96646-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5173039 & sw_lang =

• My laptop Dell Inspiron N5110 using Windows 7 64 bit. Cannot find a driver for my Bluetooth peripheral device

  My laptop Dell Inspiron N5110 using Windows 7 64 bit. In Device Manager, I found two items with a trademark right Exclaimation beside 'Devices Bluetooth device' in the other devices section. Properties, I found that these two elements with problem are found on "Microsoft Bluetooth enumerator.  I tried to run Windows update to get the driver but it says no update available. And I can't find this driver online. Can someone help me solve this problem? Thank you very much

  And you have tried the drivers supplied by the center of network from this link?

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&docid=545832&doclang=en&l=en&s=Gen&cs=

  It is a path to the bottom of the page under network.

• Windows 7 64 bit with XP Mode

  Hello

  I installed a windows 7 64 bit on the 5 of VMWare ESXi server.

  Furthermore, I would also like to use windows XP mode. But every time that I run windows xp, the windows network connection mode 7 no longer works.

  I have to close the windows xp mode and use the wizard to repair the network card. Then it works again. But if I start then again windows xp mode, the problem reoccurs.

  If I try Nslookup, it is said that the standard server is unavailable...

  I don't know how the bridge Windows Virtual PC network is configured by default, but you may have to enable mode promiscuity on the ESXi vSwitch for Windows 7 client to make it work.  See http://kb.vmware.com/kb/1004099 for instructions on this operation.

• USB foot pedal problem (Infinity IN-USB-2): recognized by Windows but does not work on VMware Workstation 10

  When I connect an Infinity IN-USB-2 pedal for my guest Windows 7 Professional (on Ubuntu 14.04 and VMware Workstation 10.0.2), the pedal gets recognized by Windows and different applications, but by pressing the pedal itself has no effect.

  I downloaded a USB foot pedal Tester (http://vec-infinity-in-usb-1-foot-pedal-tester.soft112.com/) on the client and he acknowledged that the device is connected, but when I pressed on any of the three pedals, the tester has not detected the presses.

  I tried the pedal on a real Windows computer, and it worked fine.

  When I connect the pedals, even with the guest in the foreground, VMware Workstation will appear a dialog box:

  The specified device is claimed by another (usbhid) driver on the host operating system. The device can be used. To continue, the appliance will be first disconnected from its current driver. [Cancel] [OK]

  When I click 'OK', we state above: Windows recognizes that the device is connected, but foot-presses are not detected. My other USB devices are not pop this dialog box. (Click Cancel maintains the device disconnected from the guest.) I don't know if the dialog box is significant or a red herring.

  Here's what/var/log/syslog says when I connect the pedal with the Windows client in the foreground:

  kernel: [281434.822751] usb 2 - 1.7: new low speed USB device number 28 using ehci-pci

  kernel: [281434.920667] usb 2 - 1.7: new USB key found, idVendor is 05f3, idProduct = 00ff

  kernel: [281434.920672] usb 2 - 1.7: new USB device strings: Mfr = 1, product = 2, SerialNumber = 0

  kernel: [281434.920675] usb 2 - 1.7: product: pedal WITH USB

  kernel: [281434.920678] usb 2 - 1.7: manufacturer: VEC

  kernel: [281434.923852] entry: CVE CVE USB pedals as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input38

  kernel: [281434.924239] is hid-generic 0003:05F3:00FF.0016: entry, hiddev0, hidraw3: USB HID device v1.00 [CVE CVE USB pedals] on usb-0000:00:1d.0-1.7/input0

  PSG-probe: check the bus 2, device 28: ' / sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7 '.

  PSG-probe: bus: 2, device: 28 is not a MTP device

  And when I click on "OK" to the dialog, he said:

  kernel: [281480.324926] usb 2 - 1.7: reset low speed USB device number 28 using ehci-pci

  kernel: [281480.900448] usb 2 - 1.7: reset low speed USB device number 28 using ehci-pci

  When I unplug the device, it is said:

  kernel: [281517.582472] usb 2 - 1.7: unplug USB, the device number 28

  Thanks for the ideas on solving this problem.

  Answering my own question: I spoke with a salesman who told this pedal does not work on virtual machines for the following reason:

  These pedals are all just Universal USB controllers that require programs or applications to be able to see and recognize them for use. Because they are installed by the base of Windows and Generic USB devices drivers, they can not be seen my remote computers via USB sharing etc.

  They recommended using a hotkey program to work around the problem. I have not tried this solution, but bought a different pedal that works out of the box with VM: a vP-1 vPedal. Lower build quality than infinity (in my opinion) but it works perfectly.

  This is the idea of the key of the seller:

  I have a solution that will allow you to use the pedal as expected if the remote program who need to use supports the use of shortcut keys. For example, these pedals are commonly used with NCH Software Express Scribe professional software. This software can use either a pedal, or you can assign the playback functions to access keys. In the scenario you are talking you re Express Scribe on the remote computer to use keyboard shortcuts, you then install Pedalware (http://www.altoedge.com/pedalware/index.html), a free Windows only the foot pedal utility made by NCH Software, you then use the Pedalware utility to assign the buttons on the pedal of a keyboard shortcut that coincides with those remote program.

• Problem with configure vmware workstation 6.5 with Ubuntu 9.04 64 bit latest kernel

  for the Intel-driving problem, I installed a new kernel for Jaunty.

  Normally, if you change the kernel, need new VMWARE-Workstation, but it does not work.

  I'm getting the following answer

  vmware sudo

  Login to /tmp/vmware-root/setup-26435.log

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  Stopping VMware services:

  Virtual machine communication interface is

  Virtual machine monitor makes

  File system is blocking

  Using 2.6.x kernel build system.

  do: enter the directory ' / tmp/vmware-root/modules/vmmon-only '.

  do /lib/modules/2.6.31-999-generic/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

  make [1]: Entering directory ' / usr/src/linux-headers-2.6.31-999-generic'

  CC /tmp/vmware-root/modules/vmmon-only/linux/driver.o

  In file included from /tmp/vmware-root/modules/vmmon-only/linux/driver.c:31:

  /tmp/vmware-root/modules/vmmon-only/./include/compat_wait.h:78: error: conflicting types for 'poll_initwait '.

  include/Linux/poll.h:67: error: previous declaration of 'poll_initwait' is here

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c: in function 'LinuxDriverSyncCallOnEachCPU ':

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1423: error: too many arguments to function 'smp_call_function '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c: in function 'LinuxDriver_Ioctl ':

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:2007: error: too many arguments to function 'smp_call_function '.

  make [2]: * /tmp/vmware-root/modules/vmmon-only/linux/driver.o error 1

  make [1]: * error 2

  make [1]: leaving directory ' / usr/src/linux-headers-2.6.31-999-generic'

  make: * http://vmmon.ko error 2

  make: leaving directory ' / tmp/vmware-root/modules/vmmon-only '.

  and the SETUP LOG

  Juli 28 19:20:55.486: app | Journal for VMware Workstation pid = 24193 version 6.5.2 = build = build-156735 option = output

  Juli 28 19:20:55.486: app | Host codepage = UTF-8 encoding = UTF-8

  Juli 28 19:20:55.486: app | Login to /tmp/vmware-root/setup-24193.log

  Juli 28 19:20:56.550: app | Extract the sources of the vmmon module.

  Juli 28 19:20:56.600: app | Module construction with the command: / usr/bin/make

  C - / tmp/vmware-root/modules/vmmon-only self-build SUPPORT_SMP = 1

  HEADER_DIR=/lib/modules/2.6.31-999-generic/build/include

  CC = / usr/bin/gcc = GREP / usr/bin/make IS_GCC_3 = no VMCCVER = 4.3.3

  and a box with this

  Error

  Failed to build the kernel module.

  Check the log file

  Does anyone know a Solution?

  Thank you

  Greetings

  Stefan

  -

  ---

  Computer laptop D830 DELL
  V9.04 Ubuntu Jaunty 64 bit

  
  

  Latest Version of VMWare Workstation

  -

  ---

  < / div >

  If you want to use the latest kernels that you should look for patches to update - look at this forum to find the last.

  http://communities.VMware.com/thread/221724?TSTART=0

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary