Problem with configure vmware workstation 6.5 with Ubuntu 9.04 64 bit latest kernel

Similar Questions

• problem with the operating system 64-bit client

  Hi, I'm having a problem installing of operating, including windows server 2008 R2 64-bit 64-bit, but even other OS gives the same error

  I tried with vmware workstation 6.5.1 and 7.1.0 from the VW console and check utility also said, that the host is NOT capable of running a 64-bit under this product vmware host.

  My guest operating system is windows XP Professional SP3 32-bit

  the processor is an Intel Core 2 E8400 3 GHz and the support for virtualization is enabled in the bios I looked into it and ran the securable application, he said: "Hardware Virtualization locked IT.

  What could be the problem?

  The VT in the bios was already activated, in any case I turned off the PC too.

  I checked today with the Intel Processor Identification Utility and it says for Intel virtualization technology: No. cannot know what is missing.

  This looks like a buggy BIOS. What system using (name of seller/model). Looking for an update of the firmware on the suppliers Web site.

  André

• Re: BIOS version 3.30 Tecra A11/M11: problems with Ubuntu systems?

  I just got the updated BIOS version 3.30 on my Tecra A11/M11 invitation.
  I'm still under Win7 now, but plan to add a dual boot with Ubuntu when the next LTS strikes in April.

  Is anyone having problems with the new BIOS?
  Should I upgrade or leave intact 3.20?

  I don't find any evidence of trouble with 3,20.

  Why upgrade BIOS if everything is OK?

  In addition to as much as I know that Toshiba can't stand not the Linux operating system, and I doubt that the new BIOS would improve any Linux performance so, if you are satisfied with the version 3.20, stay with that

• problem with Realtek RTL8188CE on 64-bit windows 8

  Hello

  I own a Pavilion dv7-6c90el that I updated to windows 8 two weeks ago. Each week a problem occure: my pc cannot connect to any wifi, and I can't turn off the wifi card, it does not, so I have to pass several times the pc turned off until it starts working again (after several times, you can enter the connection menu and disable the card and then turn on it other times) then works). I guess that's a driver problem (with windows 7, this problem never appeared). You can correct? Thanks in advance

  Hello

  Finally I solved uninstalling "assistant hp wireless" and by downloading an update of windows (I searched on the internet) for 'wireless button' and now it works fine.

• NO sound when recording Audio - problems with Windows 7 Ultimate 64-bit

  I got in trouble for almost a year now with NO sound when recording Audio with Windows 7 Ultimate 64-bit. I just found this forum today. It's really weird how recording with windows and other sound recorder works perfectly since 1998 or so until the upgrade to win 7. Now every time I try to record it shows no found recording device or just fails to record any sound. As you'll see below I have activated What U Hear so I can use the system recording features sounds.

  I use the functions of audio recording and pdf reader because I'm legally blind. It is one of the few tools that I could use with ease on all my systems windows for many years.

  A similar question has started happening with nvidia graphics cards. AND... I was led to believe that it was a problem with Sony wanting more strong piracy measures built into windows. Am I correct to assume that this is what is happening with the sound also today or is there a solution to this frustrating problem?

  I run a dxdiag & posted that, according to me, you asked another user on the forum, the same or similar problem.

  Help solve this problem would be greatly appreciated as this has been a problem for quite a while now.

  ------------------
  Information System
  ------------------
  Time of this report: 07 25, 2012, 19:06:02
  Computer name: RAIDER
  Operating system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503) - 2030
  Language: English (regional setting: English)
  Manufacturer: Gigabyte Technology Co., Ltd..
  System model: P67A-UD3-B3
  BIOS: Award BIOS v6.00PG Modular
  Processor: Intel Core i5 - 2500K CPU @ 3.30 GHz (4 CPUs), ~3.6GHz
  Memory: RAM 8192MB
  Available OS memory: 8176MB RAM
  Page file: 2861MB used, 13487 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  ------------
  DxDiag Notes
  ------------
  Display 1 tab: No problems found.
  Sound tab 1: No problems found.
  2 Audio tab: No problems found.
  Input tab: no problems found.

  -------------
  Sound Devices
  -------------
  Description: SPDIF Out (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: Yes
  Default voice playback: no
  Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
  Manufacturer ID: 65535
  Product ID: 65535
  Type: WDM
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  WHQL Logo would be: n/a
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Other files:
  Driver provider: Creative Technology Ltd.
  HW Accel level: basic
  Cap flags: 0x0
  Min/Max sample rate: 0, 0
  Static/Strm HW Mix beef: 0, 0
  Static/Strm HW 3D steers: 0, 0
  HW memory: 0
  Management of the voice: No.
  Listen/Src/EAX (TM) 2.0: No, no
  Listen/Src/I3DL2 (TM): No, no
  Sensaura (TM) ZoomFX (tm): No.

  Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: No.
  Default voice playback: Yes
  Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
  Manufacturer ID: 65535
  Product ID: 65535
  Type: WDM
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  WHQL Logo would be: n/a
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Other files:
  Driver provider: Creative Technology Ltd.
  HW Accel level: basic
  Cap flags: 0x0
  Min/Max sample rate: 0, 0
  Static/Strm HW Mix beef: 0, 0
  Static/Strm HW 3D steers: 0, 0
  HW memory: 0
  Management of the voice: No.
  Listen/Src/EAX (TM) 2.0: No, no
  Listen/Src/I3DL2 (TM): No, no
  Sensaura (TM) ZoomFX (tm): No.

  ---------------------
  Sound Capture devices
  ---------------------
  Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: Yes
  Default voice Capture: No.
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Description: Microphone (Webcam Pro 9000)
  Capture audio by default: No.
  Default voice Capture: No.
  Driver name: USBAUDIO.sys
  Driver version: 6.01.7601.17514 (English)
  Driver attributes: Final retail
  Date and size: 2010-11-21 13:23:47, 109696 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: No.
  Default voice Capture: Yes
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Hello

  In Services, verify that the Windows Audio service is running and set to automatic.

  a. Click Start and type Services and press ENTER.

  (b) ensure that these services are defined accordingly.

  c. right-click the service, and then click Properties.

  According to the DXDiag, there is no default sound capture selected.

  Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: No.
  Default voice playback: Yes

  Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: Yes
  Default voice Capture: No.

  Description: Microphone (Webcam Pro 9000)
  Capture audio by default: No.
  Default voice Capture: No.

  Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)

  Capture audio by default: No.

  Default voice Capture: Yes

• Dual monitor boot problem with Windows 7 Professional 64 bit after installation of any graphics program like a game.

  I have built this platform with the help of the owner of a store of 4 cumputer teir 2 years ago. We initially put Windows Vista 32 bit on the system to Vista 64 bit unstable atm. For 2 years, the computer worked like a dream. Last week I made a clean wipe of windows vista and windows 7 professional 64-bit installed. The system has two monitors. The primary monitor is a sony bravia with 26 "led and secondary for watching movies is that a 55 '' led Samsung 1080 p 240 Hz. The graphics card is a geforce GTX 295 nividia. It has 12 GB of Ram and the CPU is an i7 965 @3.20.

  The problem I have is this. After the installation of any game average to work with windows 7, the screens to reset their resolutions automatically more than a few times as they are confused. Sometimes, I have to return the screen to its correct resolution after installation in full. Most of the games and then run fine. After installing the game or any game designed for win 7 startup of computers is all messed up for the monitors. After starting hand 26 "sets its resolution and then after about a second 30 pause the computer makes the sound (the double) that it is resolutuons to reset monitor again? After that this second reset about 1-2 minutes the computer is good to go, unless it sets the res evil. The problem is the computer has never done that with vista and it is very annoying say the least. It still freezes the installation of some games. The only way to resolve what I found is the restoration of the system. The computer starts normally and screen ground is defined once she has always been. The only problem is when you install another game, the problem is their new. This problem is worse in some games.

  The latest nvidia drivers have been installed. There is no conflict in the device with the exception of an old printer Manager. The two comes is set to 60 hertz. I searched all over the internet and there seems to be a problem with windows 7 without solution. I am at a loss. Any other information that you need let me know and I'll post it. Thank you!

  Hi ancientone618,

  It sounds almost as if there is a Windows update that is in conflict with your NVIDIA Driver Installer.  I would say to disable automatic updates of Windows to see if it might help:

  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  In addition, please see the article with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to configure vmware workstation and server Suse 10 as operating system prompted

  Hi, I installed vmware workstation 6.5 on vista and Suse 10 as guest operating system.  I keep Suse as default (without any network configuration).  I modified the default vmware gateway 192.168.2.1 keep even as window by default gateway settings. I also changed to the subnet to 192.168.2.0.  The IP address is replaced by 192.168.2.128. IP address of my Vista is 192.168.2.4 and DNS Server 4.4.4.1 and 4.4.4.2.

  I tried to ping between host and guest, and comments to the host, but still received the error of "destination host unreachable". It does not matter using host only or NAT mode.

  All Documents available? All advice? What do I have to configure Suse network. ?

  Thank you

  Ming

  Mike10 wrote:

  Host:

  Wireless network connection Wireless LAN adapter:

  IPv4 address: 192.168.2.2 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Ethernet VMware Network adapter adapt VMnet1:

  IPv4 address...: 192.168.17.1 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Ethernet VMware Network adapter adapt VMnet8:

  IPv4 address: 192.168.30.1 (Preferred)

  ... Subnet mask: 255.255.255.0.

  For infor comments:

  eth0 Link encap HWaddr 00: 0C: 29:8E:1F:01

  INET addr:192.168.30.128 Bcast:192.168.30.255 mask: 255.255.255.0

  If the IP address of comments has the correct value you use VMnet8, not VMnet1. It should work, but this isn't the network "host-only '. That's what I need the .vmx file for. If this indicates that the virtual NETWORK adapter is configured as 'host-only' the IP of comments is wrong. It must be 192.168.17.x in this case.

  However... try to get a ping of the IP address, not name. Depending on the configuration you have posted, you should try to ping the 192.168.30.1 customer and 192.168.30.128 host. Don't forget that cannot work if your client is configured to use instead of VMnet1 VMnet8. If it is really configured to use VMnet1 you must change the IP of comments that I wrote above.

  If the host and the guest have active firewall disable them for testing purposes.

  Furthermore, by default, VMware installs a DHCP for VMnet1 and VMnet8 service. So if this service is still running on your host computer, you can assign the DHCP client and he gets the appropriate automatically for the network IP address.

  I don't no how to open the *.vmx in text format.  I noticed that vmnet1 IP address on the side of the BACK is 192.168.17.1 but side comments, it is established as 192.168.20.0.

  It is a text file. Just open in an editor and copy and paste it or attach the file to your next post.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• Known problems with the help of 64 bit Essbase with version 11 planning?

  Hello Experts,
  
  
  One of my clients is considering moving to the 64-bit Essbase. Are there known issues with the help of 64 bit Essbase (11.1.1.0.00) with the version 11 planning?
  
  
  Thank you
  
  Jingle

  I tested and there is no problem at all, if your planning server is 32-bit, you just install the 32-bit Essbase client that can communicate with the 64-bit server.

• Problema Con start VMware Workstation 6

  Hola Buen dia!

  Office Hola soy nuevo in the comunidad y también brilliant empiezo con las pc, me de el VMware Workstation 6 build me 39849 y estaba una prueba creando doing a professional Window XP y cuando the daba a 'start this Virtual Machine' salia este message:

  This product has expired and your virtual machine cannot be turned on.

  Remember that the date and time of your host machine are correctly defined.

  There is a newer version available on the site Web de VMware Workstation: http://www.VMware.com/info?ID=4 .

  me puse a buscar pero no salio plots salieron no solo el workstation 7 tengo than descargarme el 7 para as h.? o solo tengo than bajarme UN parchment?

  Bueno muchas gracias por leerme

  Hola pachitomandafu

  If you prune bajate el tiene mejoras todo tipo, inclusive of performance 7.

  
  Por don't favor no olvides calificar las responses that you were should o ayuda valiosos.

  Please, do not forget the points of call of the "useful" or "correct" answers

  Best wishes / Saludos

  ________________________________________

  Ing. Diego Quintana ! http://www.images.wisestamp.com/twitter.png! [! [ http://www.images.wisestamp.com/linkedin.png!: http://ar.linkedin.com/in/diegoquintana]

  vExpert 2010 - VCP 410 - VCP 310 - VAC - VTSP

  UNETE al grupo Virtualizacion Español en LinkedIn

  My Linkedin profile

  ! http://feeds.feedburner.com/WetcomGroup.1.gif!

• VMware Workstation 7 video problem with Ubuntu Lucid

  Running VMware WS 7.0.0 (trail) on Ubuntu 9.10 x 64 install Ubuntu Lucid beta.  Autoisntall works well (Ubuntu 10.4 detected), but there is absolutely no video output when installing.  Uplon restart I get the follow-up "Ubuntu runs in low graphics Mode.  Screen graphics, peripheral of entry card may not be detected correctly.  You willneed to set these yourself. "Press OK produced a menu the first choice is to use low graphics for a single session.  Thre are 3 other options, but none of them are useful because when I run Ubuntu Lucid suplpossedly Low Graphics mode the display is indeed perfectly good.   Is anyway to perpetuate one time "low gralphics mode '?  Y at - it something I can change in the following configuration:

  <!--

  @page

  PRE.western {do-family: "Times New Roman"}

  P {margin-bottom: 0.08 in.}

  ->

  {color:#000000}<font face="Sans Serif">{size:3}&lt;Foundry&gt;{size}</font>{color}
  
  {color:#000000}<font face="Sans Serif">{size:3}&lt;?xml
  version="1.0"?&gt;{size}</font>{color}
  
  {color:#000000}<font face="Sans Serif">{size:3}&lt;VM&gt;{size}</font>{color}
  
  
  {color:#000000}<font face="Sans Serif">{size:3}&lt;VMId
  type="string"&gt;52 c7 df 06 64 e3 1f 90-44 46 72 05 fa ad
  4b c8&lt;/VMId&gt;{size}</font>{color}
  
  
  {color:#000000}<font face="Sans Serif">{size:3}&lt;ClientMetaData&gt;{size}</font>{color}
  
  
  {color:#000000}<font face="Sans Serif">{size:3}&lt;clientMetaDataAttributes/&gt;{size}</font>{color}
  
  
  {color:#000000}<font face="Sans Serif">{size:3}&lt;HistoryEventList/&gt;&lt;/ClientMetaData&gt;{size}</font>{color}
  
  
  {color:#000000}<font face="Sans Serif">{size:3}&lt;vmxPathName
  type="string"&gt;Ubuntu
  Lucid.vmx&lt;/vmxPathName&gt;&lt;/VM&gt;&lt;tools-manifest&gt;&lt;svga33
  version="10.3.0.0" installed="FALSE"/&gt;&lt;svga4
  version="10.4.0.0" installed="FALSE"/&gt;&lt;vmmouse42
  version="1.0.0.0" installed="FALSE"/&gt;&lt;svga42
  version="10.10.2.0" installed="FALSE"/&gt;&lt;vmmouse43
  version="12.6.4.0" installed="FALSE"/&gt;&lt;svga43
  version="10.16.7.0" installed="FALSE"/&gt;&lt;vmmouse43_64
  version="12.6.4.0" installed="FALSE"/&gt;&lt;svga43_64
  version="10.16.7.0" installed="FALSE"/&gt;&lt;vmmouse67
  version="12.6.4.0" installed="FALSE"/&gt;&lt;svga67
  version="10.16.7.0" installed="FALSE"/&gt;&lt;vmmouse67_64
  version="12.6.4.0" ins{size}</font>{color}
  
  

  ? Marty Bruno Ferreira

  Latest updates to lucid Lynx has addressed the problem between xorg and vmware video driver.  Just re - rerun Setup vmware tools and restart the computer.

• Problem of unity with Ubuntu 12.04 64 bit guest (July2012)

  Hello

  I am running technical overview July 2012 and seems like ubuntu 12.04 Unity mode is simply disabled "unity is not supported on this operating system of comments", tried to turn off the 3D features on the parameters of the virtual machine, start the Office Unit and the ordinary unity2d without result. It is really a valuable function for me, is there a quick fix to enable it again?

  I am often Web development/debugging quickly my Ubuntu VM sites because it is the best way for me to have a stack PHP close to that on the production (zend server) server, and then that it is offered on windows, lack of case-sensitive he already played a few things about me. I tried to go to the road to the "shared folder", but I always encountered weird as behavior "I'm trying to access a file, the file does not exist, add it and see the only way for the virtual machine must restart (always the same behavior up to workstation 8.0.4)..

  So far I like where the tech preview is going, if the 3D linux capabilities may play well with the mode of the unit, which would be perfect in the end!

  Stone

  Hi Pierre,.

  VMware Tools does not support the si unit: a) the comments window manager Compiz, or b) comments desktop environment is unity of Ubuntu.

  If no condition is met, you can enter the unit without problem.

• Problems with Win 7 Professional 64-bit Microsoft wireless keyboard

  I've been successfully running Windows 7 Professional 64 bit on my desk since last October.  So far, I had been using a Microsoft Wireless Comfort 1 keyboard. 0 and Microsoft optical mouse 2.0 with no issues whatsoever, another that he had got very old and shabby and all the letters had disappeared from the keyboard.  Then I myself treated then for a keyboard Microsoft wireless Comfort keyboard 5000 and 5000, the mouse, sold as a set.

  I installed, downloaded the 64-bit drivers updated for Win 7, etc, etc.  The mouse worked perfectly, but the keyboard was nothing else into trouble.  It starts fine but then after about five or ten minutes of work, start some keys not typing and I have to wait a few seconds for him to fend and catch up.  He then sporadically to this.  Re-booting does not seem to make a big difference.  Exchanging the small dongle USB around various ports seems to have an effect slightly but not sustainable.  Remove and reinstall the drivers also seems to have an effect slightly but not sustainable.

  I think that it's something in the config or the drivers between Win 7 and the keyboard, as I tried two of these keyboards and both do the same thing, so it's not a faulty keyboard.  I also switched out to another computer also running Win 7 Professional, 64-bit, and it comes up with that one as well.

  In the end, I got back to the shabby old keyboard while the beautiful new sits on the plateau, that which is not exactly what was meant.  I tried to look through the diversity of the other questions people have had here with wireless keyboards and computers, but can not see responses that quite match my setup questions.  So, what to do next?

  For possible interference, you can watch your router Wireless N +.  Wireless N can operate at 2.4 Ghz or 5 GHz.  Most of the brands end lower base 2.4 race, which is the same as the 5000 wireless set.  If your wireless network has the option of 5 Ghz, you might want to try it.  Also if you have a cordless phone that works at 2.4 it could cause problems.  I know not many people use wireless phones these days other than cell phones, but it could be a problem as well.

• Problems with Ubuntu on the Satellite M305D-S4831

  I tried to install Ubuntu and Kubuntu as a dual boot with Vista and no lets my wireless or Lan of the right function. They both say that they have restricted drivers in use, but they do not always work.

  Can anyone help? The rest of the forums are over my head. Can someone give me a step by step and what to write in the terminal what to download to vista and put it on my linux desktop?
  I hate Vista. It freezes and mess. It's Horrible!

  Please help someone, I don't know if I will last another day on Vista.

  Unfortunately I can't help you with Linux, but I think you should try to verify some of the Linux forums. Toshiba is not compatible with Linux and you will be very happy if someone here can help you.

  Just FYI: Toshiba and Linux you can find on http://newsletter.toshiba-tro.de/main/ and http://linux.toshiba-dme.co.jp/linux/index.html.

  Bye and good luck!

• Problem with 2 PC - one 32-bit, the other 64-bit.

  Hello

  I'm trying just to the creative cloud

  I have 2 computers:

  * one is an old 32-bit with an internet connection

  * one - in another place - is a 64-bit, but having No access to an internet connection

  I want to install After Effects CS6 on 64-bit PC that has No internet connection

  Is it possible

  1 / download After Effects by the internet connection on the 32-bit PC?

  2 / transfer on 64-bit PC

  3 / what to do next?   Enter a serial number as I warned him to creative cloud?

  How do I get it?

  Thank you!!

  Internet Gizmo2D3D connection is required to use the creative cloud.  You can install a trial version, connect you to the Internet on the 64 bit system, and then sign in using the Adobe ID associated with your subscription.  You must repeat this process at least every 30 days or less which allows the software to verify your eligibility to use the software however.

  Is there no possibility to provide a wireless connection or another way to access the Internet on the 64-bit computer?  If this isn't the case, then I recommend you to buy a perpetual version of our software as opposed to a subscription.

• Global problems with IE crashing after installing the latest updates from Ms.

  After the installation of the last series MS Updates, we are seeing users get first notification DEP for Windows Explorer (using IE7), then an other error message stating that Windows must close THE Explorer. What happens when users try to access our portal Citrix Presentation Server SSL/VPN.

  Hi Chad t,

  Data Execution Prevention (DEP) is a set of hardware and software technologies that perform additional checks on memory to help prevent malicious code from running on a system.

  The main advantage of the DEP must help prevent the execution of code from data pages. In general, code is not executed by the default heap and the stack. Hardware DEP detects code that is running from these locations and throws an exception when execution occurs. Software DEP can help prevent malicious code to take advantage of exception-handling mechanisms in Windows.

  Microsoft does not recommend to Turn off the Data Execution Prevention (DEP).

  For more information on DEP, you can access the link below for the blog that talks about the DEP and the DEP/NX problems.
  http://msdnrss.thecoderblogs.com/2009/10/10/understanding-depnx/

  As you mentioned it started after the updates, I also suggest you to uninstall Internet Explorer and put it back manually and see if the problem persists. Access the links below for the steps to uninstall and reinstall Internet Explorer 7 respectively.

  http://support.Microsoft.com/kb/927177

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=9AE91EBE-3385-447C-8A30-081805B2F90B&displaylang=en

  For further assistance, you can also consult to Citrix Support to see if they have a fix or a workaround is available.
  http://www.Citrix.com/lang/English/support.asp

  Warning: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.