boot priority

Similar Questions

• Satellite A10 - boot priority must be changed

  Hello world

  I have an old Satellite A10 here, and I'm supposed to put a new operating system on it.
  Problem: He doesn't let me boot from the CD/DVD!
  In the BIOS (APCI BIOS version = 1.30), I can not change the boot priority, which is I can not put the DVD drive as the first boot device.
  By pressing F12 or 'C' when you turn on the laptop don't boot options not present either.

  In another thread, I read that you can change the boot device by selecting devices to boot images that can be seen under the TOSHIBA sign during the power supply of the laptop is just turned on. How do you do that? The TAB and arrow keys do not work for me...

  There in the windows, the utility TOSHIBA HWSetup startmenu which is password protected. In the manual it says that you can change the priority of priming (from inside of windows!), but unfortunately the owner does not remember any password it have probably set, so I can't change the boot sequence for there either.
  but in any case it must be possible to boot from the CD without access to windows, where windows no longer works...

  Is there yet another possibility to use a "connector wrapping parallel haven" seeing that I don't know how its done or used?

  Who has ideas?

  THX

  Hello

  Stand by. You can enter the BIOS settings or BIOS is protected by password too?

• Boot priority order

  I have an acer aspire one ao531h. In the boot priority order, it has the following options:
  Boot USB CDROM, USB HDD, IDE0, IDE1, network, USB FDD. For bootable whitch is all of them? (USB CDROM is for DVD and CD)

  Hello...

• I can't clean reinstall my version of vista because my cd/dvd drive is not installed in my bios boot priority. Please can you help me solve this problem?

  (cd ide) not installed in my bios boot

  I can't reinstall clean my version of vista because my cd/dvd drive is not installed in my bios boot priority please can you help solve this problem

  You added a new drive?

  All the drivers are up to date?

  Check the cables for loose connections.

  Is it possible for you to do the following to reload the original Windows installation files?

  Start > all programs

  Select Samsung

  Samsung Recovery Solution

  Select "full restoration".

  -or-

  Restart Windows and the Samsung logo starts pressing F4 to access the recovery screen

  This is a known problem in Samsung - see document - links products are not good

  http://support-US.Samsung.com/Cyber/Popup/iframe/pop_troubleshooting_fr.jsp?idx=43092&modelname=SV0411N&modelcode=

  It is Support Center of Samsung - Re: HDD no detect does not issue

  Click Troubleshoot utility (PS there is a pop up window)

  http://www.Samsung.com/global/business/HDD/

  Samsung also recommend OnTrack Disk Diagnostic. You can make a bootable floppy to advise data with this:

  http://buyonline.Ontrack.com/ecom/fr...file=DC500.exe

  And here is the other programs from Samsung. The creator of the Manager of disc is really of Ontrack and hosted by Samsung. It should work with any brand of hard drive.

  http://www.Samsung.com/Products/Hard...file/Sutil.exe
  http://www.Samsung.com/Products/Hard...Ile/SHDIAG.exe
  http://www.Samsung.com/Products/Hard...il_creator.exe
  http://www.Samsung.com/products/hard...DM_Creator.zip

  (Disk Manager link was not on the Samsung website with the exception of one who asked for the story of your life, but in trying different possibilities with links leading to other files, I finally found one that allowed a download without having to give everything and personal information.)

  ___Taken from the following thread - Elvandil response
  http://forums.techguy.org/all-other-software/254208-Samsung-HDD-utility.html
  
   

• CD Rom Boot priority NO mean average?

  CD rom not boot priority no way, reboot and select proper boot device or insert boot media in selected boot device and press a key... I get on this message and my system goes no further...

  CD Rom Boot priority NO mean average? I woke up this morning and I got a message w / this black screen on it.  He also says Reboot and select proper boot device or insert boot media in selected boot device and press a key.

  Hello

  Something happened to your BIOS or worse. Maybe old CMOS battery.

  Enter / configuration settings (BIOS/CMOS) often F2 as you start - set the boot order to hard drive 1.

  Don't be surprised if you need technical assistance in a real store of the computer (not the leeks and pics
  at a Best Buy or other department stores) or system manufacturer support.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Vista boot priority

  I have Windows vista basic and I can not change the bios boot priority, affecting during startup. My hard drive is now in third place. First priority is CD-ROM, is second diskette and is third hard disk. It took time for him to start, and I think that it is the cause. Please tell me how to change the boot priority. Thank you.

  Hi thunder02,

  This link gives a good guide illustrated the boot priority: http://pcsupport.about.com/od/fixtheproblem/ss/bootorderchange.htm

  There may be a slight variation in the screenshots according to the manufacturer of your BIOS, but basically, the procedure is much the same for all BIOS manufacturers. John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• A40: How can I access HWTOOLS to change my boot priority?

  Hello

  Windows XP is broken on my computer and I've been tracking just the reason why I can't change my priority of boot on my laptop of the A40.

  My son put a 'master' password in HWTOOLS. I can't access windows (it never comes boots or plant out after the XP screen in safe mode).

  How to access HWTOOLS or reset this password blown!

  Any help appreciated.

  Richard.

  Hello

  This problem has been resolved in the other topic you have posted in the forum.
  Please check out this other topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8578&MessageID=29979#29979

  Good bye

• How can I set up the DVD player, the 1st boot priority?

  I don't know hoe to set my PC startup to restart from the DVD player. I have a product recovery disk, but not to make my PC open system restore. Help, please.
  I changed my system registry uxtheme.dll and this problem started occurring.

  Put the DVD in the drive and start it.

  You may need to change a BIOS setting to make the first boot device, a DVD/CD player. To do this, when you turn on look for a configuration message indicating what key to start typing - F2 and del are commonly used. The message appears for very long and it you miss, you have to restart the computer.

  In the BIOS, look for a section that contains the boot sequence, change to CD/DVD, save it and let the computer to restart. In addition, some pre-installed systems have another key (usually F12) that allows the user to open the start menu rather than change the BIOS boot sequence.

• SRM 4.1.2 - cannot change the boot priority machine

  Hello

  Everyone has noticed the ability to change the priority of implementation of VMS in Recovery Plans seems to have disappeared or I'm totally missing something.

  Tips or tricks

  Thank you

  Hello

  I don't have the chance to work with this version.

  You have the 'up' and 'down' buttons? Are they greyed out?

  Michael.

• Re: Satellite A50 - how can I change the boot with BIOS password priority?

  I have a Satellite A50. I need to restore to factory default to recover DVD, how do I boot from the DVD?

  The default boot priority is the HARD drive and is more bootable has been formatted. My BIOS is password protected, how can I change the boot priority? After having inserted the password, its always boot from the HARD drive.

  Thank you

  The boot priority, that you can change in the BIOS.
  Go into the BIOS with ESC, enter your password and then you can change it.
  But don t forget to save the changes.

  That s all and then you can boot from the CD.

• I can't change the order of priority of Boot thinkpad t520

  on the order of precedence of Boot, there is only ATA HDD0, and the other option are excluded.

  How to add thoes optioh like USB/CD to boot priority order

  supervisor password? Look under the Security tab.

• Cannot change the priority of boot CD-ROM - Y580

  Recently bought the laptop Lenovo y580 which comes preinstalled with Windows 8. I can't boot from a cd or a flash drive as there is no place in the bios to change. In the boot priority that it lists only

  the Windows Boot Manager

  something else to IVP4

  something else for IVP6

  How can I change this so that I can boot and install another operating system, any ideas?

  In the bios menu turn off uefi and secure boot.

• Giving priority to a CD in the boot of startup menu.

  I have a Veriton X4620G and tries to set startup to load from a cd if I need to use a rescue disk.

  At startup, I pressed F12 and given two options:

  (1) (2) P3 Windows Boot Manager: HL - DT - DVDRAM - GHAZN

  I don't see any mention of an option to change the start to load from a cd.

  Does this mean that I do not have this option, or should I do something else to help?

  Thank you.

  to edit and save the boot priority list, you must enter the BIOS, not the start menu.

  Press DELETE at startup and check the list of start-up, move the DVD in the first place, then save and exit.

  In addition, you can use the start menu and choose (2) P3: HL - DT - DVDRAM - GHAZN, is your CD/DVD.

• Qosmio E10-102 - cannot boot from CD/DVD

  Hello

  I have a laptop Qosmio E10-102 here. The hard drive is missing and I need to install the operating system on a new hard drive but I can't boot from CD/DVD. After the start of Qosmio screen, it shows "insert system disk in drive. Press any key when ready... ».

  When I press F1, I get the 1.5 version of BIOS ACPI boot menu, but I can't change date, time and the password. The boot priority is HDD-> FDD-> CD and I can't change it. The manual says to hold F12 during initialization, but this has no effect. Even by pressing the 'c' key, the disc does not start.

  I tried to put the hard drive in a laptop and install there, but detects the Windows installation disc, that's not Toshiba laptop.

  No idea how to fix?

  Hi Napto,

  The CD/DVD drive is correctly listed in the BIOS? You see the model number of your player? Usually, this should be possible

  And what installation disc, you are starting? You use Microsoft disc or Toshiba Recovery disk?
  Maybe the current disc is scratched

• CL10-B-100 satellite - cannot boot from USB Live of Linux

  I just bought a Satellite CL10-B-100 (PSKVEE - 00300CG 6) with only 8.1 Windows preinstalled. I need to boot from a linux live usb - without success now. No MSC instead of UEFI option available in BIOS. Secure boot disabled, USB set as first boot priority option. The latest version of the BIOS, I found online is the same as on the computer - 1.00

  Any suggestions on how to start from USB Linux?

  Good day

  C.

  Hello

  Most modern distributions should be able to start using the UEFI.
  However, you forgot to mention what distro you are using.

  I assume that your pressing F12 at startup to get the start menu, verify that your key is recognized and select to start him?
  Which means that it fails? No not at all, start it begins to start but fall into problems... ?

  Please clarify the situation.
  BR
  Tom