T61 T7500 + Win8.1... CPU won't go above 54% usage

Similar Questions

• Read the CPU hits 100% in the FIFO usage

  I have a PC in real-time with a card of RIO 7833R. I write the values that I read a microphone in a FIFO at a sampling rate of 4 kHz.The length of the FIFO is 2048. The PC in real-time, when I call 'FIFO read' function to read say 400 data samples, the use of CPU time real PC hits 100%. Why is it so? The function 'Read FIFO' is placed inside a while loop.

  Thank you

  Prashant

  Hi Prashant,

  Reading the FIFO is a method of querying, so if the number of elements specified to read are not available when the method is called, it queries the FPGA until they are.  This causes the CPU to 100% usage. You can find more information on this subject and a way around this here.

• 100% cpu for indefinite periods of time usage

  A few minutes after you be connected online via msn.com my cpu goes into the use of 100% everything which is attributed to a «wlcomm.exe» process  Once I understand, it is almost impossible to resume the cpu without stop.  I do not get this problem if I'm not online.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. you have windows live messenger installed on the computer?

  Check if the problem persists in SafeMode (step 1). If the problem does not persist in SafeMode with network then, perform the clean boot (step 2) on your computer.

  Step 1:

  1. reboot the computer
  2 start typing the F8 key
  3. you get it anticipated the startup option window
  4 Select the mode or safe mode with networking

  Link: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Step 2:

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Follow the steps provide in the article below to perform the clean boot.
  http://support.Microsoft.com/kb/310353

  Step 3: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• lately, Windows XP Home Edition appears to lock the CPU to 100% in McciServiceHost.exe usage

  Same problem with Office 2003 running, but an additional problem in Outlook: select email inbox and delete several crashes Outlook

  http://forums.att.com/T5/features-and-how-to/what-is-McciServiceHost-exe/TD-p/2307565

• Allocate more CPU host comments

  I have a quad core 2 socket server running VSphere 4.0.  Looking at the graphs of performance and CPU host never gets above 30% usage.

  I have a linux guest, who will give me an alarm that it max out the CPU usage.   I currently have 2 CPU assigned to this prompt.  Since I was the fresh General CPU on the host what can I do to allow more processing host at this prompt?

  Thank you

  In your case, I think that perhaps you need to add an another vcpus.

  Rgds

  Diego

• Upgrade CPU of my Satellite Pro L300-152

  Hello

  my laptop is a:

  Toshiba Satellite Pro L300-152
  Model no. PSLB1E-01R015EN
  Celeron 560 2.13 GHz

  Can someone tell me what CPU I can pass safely, I use it in a cool environment and care about a few 100 mhz more of her.

  Thank you for your support

  Before you start to discuss CPU upgrade, check it please this Toshiba document - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  My personal opinion is that upgrading the CPU won't help much and you will not realize a difference in performance for laptop. In my opinion need more RAM or SSD better and faster. This better and better performance some CPU with 100 mhz dating more than one.

• T61 suddenly stops after replacing the fan

  I was getting a fan error (which prevented the start unit), so I ordered a replacement.

  On install last night, everything seemed fine. Unit ran fine for 20 m and then Bam! abrupt stop.

  This morning, same thing, the two witht the battery installed and with it out.

  I have to suspect the fan, but I guess that the unit would not start even though the fan was not working.

  any suggestions to diagnose the problem?

  Thank you very much

  Peter

  Hard to say...

  The theory says the system automatically stops to avoid damage permanent, but if you tried to run more than once...

  In any case a new CPU won't cost you much. Try again once the thermal paste is reapllied.

  I hope you're using the HMM and following the procedures described here. Don't forget to tell us the number of type of machine (see my post above)

  Good luck!

• Percentage of maximum CPU Windows 7 constantly frequency > 100%

  Under Windows, I find that my CPU fan runs constantly audible. The fan made ramp immediately after Windows starts, even with no applications running. Windows resource monitor shows the CPU usage in the range of 25 to 40%. However, the maximum percentage of CPU frequency is consistently above 100% (usually around 110-115%). This means that the system is too overclocking? If so, is it logical to deduce that this may cause the CPU fan to run so much? Finally, how can I get this back to 100% (or less)?

  The fan does not this way under MacOS.

  MB Pro (by 2012) running Windows 7 under Bootcamp (MacOS 10.11.6).

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• Tecra A8 Normal CPU temperature question

  Hi all...
  Can someone let me know what is the value of the ideal temperature for the laptop above?
  Processor (s)

  Number of processors 1
  Number of cores 2 per processor
  Number of threads per processor 2
  Name Intel Mobile Core 2 Duo T5500
  Code-named Merom
  Specification provided® Corea? ¢ 2 CPU T5500 @ 1.66 GHz
  The Socket 479 mPGA package
  Model family, not to not 6.F.2
  Family expanded/model 6.F
  Core Stepping L2
  65 nm technology
  Basic speed 1662,5 MHz
  Multiplier x Bus 10,0 x 166.2 MHz speed
  665,0 MHz rated Bus speed
  Stock frequency 1666 MHz
  MMX, SSE, SSE2, SSE3, SSSE3, EM64T instruction sets
  Data L1 cache (per processor) 2 x 32 KB, size 8-way line set associative, 64 bytes
  L1 instruction cache 2 x 32 KB (per processor), size 8-way set associative line, 64 bytes
  Cache (per processor) L2 2048 kilobytes, size 8-way line set associative, 64 bytes

  Memory & Chipset

  Northbridge Intel i945GM Rev 03
  Southbridge Intel 82801GHM (ICH7-M/U) Rev B0
  Memory type DDR2
  Memory size 2048 MB
  Frequency memory 332,5 MHz (1:2)
  Latency CASE clocks # (tCL) 5.0
  RAS # for CASE # (tRCD) 5 clocks
  RAS # Precharge (tRP) 5 clocks
  Cycle Time (tRAS) 15 clocks
  21 (tRC) Bank Cycle time clocks

  System

  The TOSHIBA system manufacturer
  System name TECRA A8
  S/N 37058649H system
  Mother TOSHIBA card provider
  Portable mother PC card model
  The TOSHIBA BIOS Editor
  Version 3.40 BIOS version
  Date of the BIOS 03/12/2007

  Memory SPD

  Module 1 DDR2, PC2-5300 (333 MHz), 1024 MB, Kingston
  Module 2 DDR2, PC2-5300 (333 MHz), 1024 MB, Kingston

  Software

  Windows Version Microsoft Windows XP Professional Service Pack 3 (Build 2600)
  DirectX version 9 .0c

  Here are the specs. Can someone tell me which is the normal temperature of the CPU of the laptop above?

  Hello

  The CPU temperature depends on the use of the laptop and so it s not easy to say what would be the value of the ideal temperature.

  According to this site of specification Intel CPU T5500 CPU temperature could affect up to 100 ° C
  http://processorfinder.Intel.com/details.aspx?sSpec=SL9SQ

  But of course the internal CPU for laptop is much lower.
  Running common applications temperature could increase to 50-60 ° C

  Good bye

• suggestd demon's memory and cpu dirty how clean?

  The demon, /System/Library/PrivateFrameworks/CoreSuggestions.framework/Versions/A/Support/ suggestd is an absolute pig on my system.  After a few weeks of use, the memory footprint went up to 1.3 GB and she chews intermittently up to 100% of cpu on one of the processor usage.

  Of course there is no man page to this topic, only way I could understand what he did was look at the binary, and based on what I've learned that's not anything I should muck with as so my services interact with him.

  Here files of database this service tells you better than I can say.  Is there a way to clean it?

  

  Best picture, with the contents of subdirectories...

  

• WUAUSERV takes up 50% of my CPU all the time

  Separated from this thread.

  I have the same problem as the OP, I ran track for 60 seconds during high cpu/memory/fan use and in the end, I stopped wuauserv to show the normal state of my pc. Then saved... Here is a link to the newspapers

  https://drive.Google.com/folderview?ID=0BxySCTCnRImDc1BiNnFpNFdjdVE&USP=sharing

  I have separated you in your own thread because your problem is slightly different.

  This is no doubt WU using about 25%.  I see where when you killed he went down to nothing.

  There's a good thread on it here

  https://blogs.technet.Microsoft.com/asiasupp/2007/05/29/automatic-update-causes-Svchost-exe-high-CPU/

  If the above is not enough, you can reset the windows update service is reading how here

  http://www.tenforums.com/tutorials/24742-Windows-update-reset-Windows-10-a.html

  I would also like to launch a file system check (& DISM) for the status of the operating system

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 
  
  
  All instructions are in our Wiki article below... If you have any questions please ask us.
  Check the file system (CFS) analysis and repair system files & DISM to fix things SFC cannot

  

• IPS CPU utilization question

  Hello

  One of the ips ssm-10 active, showing the CPU sometimes 100% and sometimes 0% usage

  is this normal or something else?

  Also find attachments

  Well Hi,

  As I said in the previous to your post, this cpu bar is not the correct indication of load inspection ips:

  "CPU utilization statistics are not a good indication of the processing of sensor load. "The percentage of charge of inspection in the output of its use during the last 5 s 100 "

  https://supportforums.Cisco.com/discussion/12619366/SSM-10-signature-UPD...

  Rate if this can help!

  Kind regards

  Akshay Rouanet

• How do I adapt bridge CC2015 settings, so it does not work with my new MacBook Pro (10.11.1) at 500% CPU?

  Bridge CC2015 to run my new MacBook Pro (10.11.1) extremely hot. Fans are crazy and there are 500 + % CPU use.

  Is there something I can adjust back to normal levels? I can't use it otherwise, it's going to melt my computer. Any suggestions?

  Hello!

  I disagree, Photoshop was running the CPU very high, constantly above 100% (but not as bad as the bridge, which was greater than 500%) - especially when using healing and cloning brushes in quick succession, not to mention tool of transformation, which was even worse. The only way I could use it would normally operate in low resolution. I do a lot of pro work of retouching in Photoshop, so it is very demand a lot of work.

  With PS 15.0.1 put a few days previously, it seems to work normally, however! Except the transformation tool, who infiltrates the fan works, but not as bad as before.

  A strange thing happened, Bridge seems to work ok now. Don't know what happened. I am connected to an external monitor, but I don't see how it would matter. Maybe Photoshop upgrade had something to do with it?

  I guess my problem is solved even if I have not changed anything.

  Thanks for your help!
  Manja

• Pavilion g7: Hp recovery media

  I'm trying to create a recovery on my g7 pavilion hp media initially windows 8 upgraded to windows 10. I'm trying to use a new disc flash 32 gig it starts formatting the usb drive and never ends rest at 0% of all ideas

  IshoTA

  Sorry, but this is not going to work.

  If you try to create a recovery Win8 media, it won't work because the upgrade of Win10 corrupt recovery HP information: HP Recovery Manager blocked after Windows 10 Upgrade - HP Support Forum's - 5170752

  If you try to create a recovery Win10 media, it won't work because she needs a recovery of Win10 with a Tablet OEM image partition put their HP and your PC does not have because it came with 8 Win.

  At this point, your best bet is to use a third-party product known as Macrium Reflect.

  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together: http://www.macrium.com/reflectfree.aspx
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  My experience is that SIR, when you use the option of Compression high, typically allows to compress the image file recorded at about 50% of the space USED in the OS partition.  This means that if you have a 40GB and 80GB OS partition is used, MR must only about 20 GB to store the image file.
  
  I use all the time and it usually takes less than 10 minutes to make the backup of the image and at the same time or less do a restore.
  
  In addition, MR has the ability to add a recovery Boot Menu entry.  This then allows you to boot into Windows re, and then you can use it to do a restore - when you cannot start Windows!
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  Good luck

• Update HP laptop

  Hello! I take into consideration on the upgrade of my laptop because my FPS game blocks around 15-30 so lucky, so I think soon I'll upgrade the processor so that I can have fun for my game or all days other things I can do on my computer. I need help because it's my first time open the innards of the computer and remove things. Can someone tell me very spicific steps of how to do it?

  gate1045 wrote:
  

  ... I think soon I'll upgrade the processor so that I can have fun for my game or all other everyday things...

  Hello

  Upgrade CPU won't help. You need a good map video too, and upgrade the video card on laptops is not easy as walking in a park. I don't know the product/model of your laptop, but looking at his CPU, all I can say: forget the upgrade plan and save money to buy a laptop games if you wish.

  Kind regards.