Boot stops at the HP screen after resizing partition

Similar Questions

• Having the black screen after put the password in

  Hello, my HP model number 15do11TU, product code F6D42PA #ABG has a black with the cursor screen after that I entered the password. I can open the Task Manager but when I click on switch to try and get anything that is open, nothing happens. I tried to remove the battery and powering off/on power but still nothing, help!

  Hello

  Try the following.

  Stop of the laptop and leave it like that for 10 seconds.

  Tap here to f11 as soon as you press the power button until you see a message "Windows is loading.

  On the next screen, select your Keyboard Layout and on the next screen, select Troubleshooting.

  Select 'Advanced Options', and then select System Restore.

  Click on yourcurrent system O and then wait as the system restore window opens.

  Choose a restore point before the problem session opening took place and then proceed to the system restore.

  Kind regards

  DP - K

• Windows Vista, it will not move in front of the 'Welcome' screen after you enter the administrator login password.

  After you have installed an in place upgrade to Windows Vista, it will not move beyond the 'Welcome' screen after you enter the administrator login password.  The computer works fine in safe mode with network, however I am unable to boot normally without hang on the screen 'welcome. '

  (the system is running pre - SP1)

  Hello

  Start the computer to boot in safe mode with network and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

• Peut only the boot without failure; A regular boot freezes on the 'Welcome' screen and fades to black

  I use an ASUS laptop and everything was smooth until yesterday earlier.  I tried to start in class and it took a little longer (stopping at the 'Welcome' screen) but I'm starting up normal and thought nothing of him.  I'm going to the House an hour later and try to start and I can just connect to Windows 7 unless I Boot safe with networking.

  I have no idea how to fix this, I have no CD, I have no Windows CD that's at my parents (and anyway was a CD to upgrade), I spent 5 hours essentially pulling my hair out try everything last night and this morning still will not work.  I am now in safe mode.

  I would like to know all the details you guys need and how to get them and I'll probably get them to you immediately because I really need my computer today.  Thank you

  Driver card mother/Chipset should solve this problem.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• How to return to the main screen after watching downloads?

  This such a stupid question, but I have forgotten how to return to the main screen after watching downloads.

  Close the window or tab to download (if you are using some addon) or only to change the tab:

  • Use the tabs to organize a lot of Web sites in a single window

  Downloads:

  • Find and manage downloaded files

• My computer keeps going back to the logon screen after a few minutes

  My computer keeps going back to the logon screen after a few minutes

  Hey Missy,

  In addition, you can go through this post.

  The main reasons for this problem is a corruption in the registry key that contains the value of the files that are executed during the connection to windows. This registry key can get is replaced by an incorrect value, or it might get corrupted due to a virus / trojan activity.

  See if you can solve this problem by running SFC (System File Checker) scan in safe mode.

  Step 1: Start the computer in safe mode

  Using safe mode, see: start your computer in safe mode

  Step 2: Scan SFC

  This analysis relationto with system files integrity problems and trying to fix the same. If the scan does not automatically, you can try to repair these files manually. Detailed information is available here:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 run on the small screen after system configuration cenges

  Windows 7 run on the small screen after system configuration cenges

  Thanks a lot for hellpe I did the reset and the problem fixed. I'll set your methods in next time

• El Capitan does not start after a freeze and a forced, bonded stop on the gray screen

  Hi all

  I have a MacBook Pro 17 "late 2011, 2.4 Ghz, 16 GB RAM with OS X El Capitan installed, the latest version with all the updates." A year ago, I've had my Toshiba HDD replaced by Samsung SSD 250 GB SATA III 850 EVO and the Toshiba disk has been moved to CD using LMP disk Doubler Bay, at the same time, I had my RAM went from 8 GB to 16 GB of RAM, I have now. The OS X El Capitan is installed on the SSD. In this configuration, everything worked well, with absolutely no problem whatsoever. Sometimes, I ran disk utility to check both of my hard drives and no problem.

  Unfortunately yesterday, strange things started going. First of all, I noticed some unusual glitches when you browse the internet with Safari. I'll try to describe the best I can because they lasted about 2 seconds, so I don't recall. In any case, all of a sudden, as if half right of my screen has shifted in the middle of the screen and it was wrong and image around was all damaged or distorted but legible. He'll be back to normal when I switched between applications or revealed the office displays the windows of all running applications.

  It was similar to this (below) but much larger.

  

  Then, I continued my work as if nothing had happened, when all of a sudden my mouse pointer disappeared and the system froze completely. It was just totally frozen, the time was not moving and the computer did not react somehow to the keys I pressed. Unable to do anything, I had to press and hold the power button to turn off the computer. After starting it again once I hear the ringtone, I see the gray Apple logo and the loading bar. When the loading bar reaches about 40%, a coloured horizontal line appears (see photo below), then it subsides quickly followed by a black screen, which is quickly followed by a blank grey screen with no Apple logo or the bar loading, just a gray screen Uni, where I'm stuck. The computer turns off by itself after about 15-30 minutes if I leave it like that on the gray black screen.

  The coloured horizontal line:

  http://i.imgur.com/9rzEyc4.jpg

  I can't start in safe mode or recovery mode.

  I CAN only boot single user mode, Apple Hardware Test mode, the boot (by holding the ALT/OPTION key) Manager and verbose mode. Also, I can start on the Internet recovery mode but once the download is complete, it is stuck on the gray screen (gray screen with the Apple logo WITHOUT horizontal line-online quick clear-online stuck on the gray screen black screen)

  After a lot of googling and reading, that's what I've tried so far:

  -' fsck - fy " in single-user mode

  -running Apple Hardware Test and the Apple Hardware Test extended, both are zero problem

  -Reset PRAM and NVRAM, MSC, several times

  -with the help of this guide: https://www.afp548.com/2015/01/14/when-yosemite-has-fallen-and-it-cant-get-up/ in single-user mode: "rm - rf / Volumes/Macintosh\ HD/private/var/db/BootCache * '

  "rm - rf/Volumes/Macintosh\ HD/Library/Caches/com.apple*"

  "defaults write DSBindTimeout HD/Library/Preferences/com.apple.loginwindow.plist Volumes/Macintosh\ - int 10.

  
  

  -in single-user mode: empty the trash

  -in single-user mode: "sudo purge"

  
  

  -in a single user mode: 'exit' or 'reboot'

  
  

  
  

  However, during my fight, I could successfully arrives at the login screen, log in and use my MacBook for some time, about a half hour before the same thing happens, the mouse disappears and the system to freeze completely. I remember that both times where I was able to get to the login screen, it was after I had been in single user mode and typed 'Quit' or 'reboot'.

  The above colorful horizontal line also appears in the single-user mode when I type "exit" AND I am UNABLE to get to the login screen later (photo below). It just goes to the gray white screen. Those two times when I was able to connect to exit single-user mode, the horizontal line colored is NOT appear in single-user mode.

  The horizontal line colored when you exit single-user mode:

  http://i.imgur.com/0tOVEO6.jpg

  
  

  
  

  Here's what I see in Verbose mode:

  http://imgur.com/LJIRyo

  http://imgur.com/4HF4hvJ

  http://imgur.com/uMdHY5Z

  http://imgur.com/WSswHKK

  MacBook Pro repair for graphics issues outreach program

• Windows 8 guard then return me to the lock screen after a minute. How can I stop it snaps?

  Hello

  I need help. Its getting frustrating because every time I'm sitting at my computer and I don't touch it for a minute, I'm brought back to the lock screen so I have to enter my password again. I already tried to change the screen saver timeout, but has nothing to do with it, because I did not put a screen saver. Can someone tell me please how to stop windows crashes me?
  Thank you.

  Hello

  Try the solutions in these related threads:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/delaying-the-login-requirement-after-the/4b3be54b-689f-4A75-a739-5b1c2e5f577d

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-desktop/how-to-disable-lock-screen-in-Windows-81/119115ec-37c2-4245-b1a8-0401b9ad7cf5

• Cant' boot with boot camp after resizing partition OSX

  How to resize my bootcamp partition without deleting chtol

  I should have seen all the answers before I do it myself

  After resizing main partition by 10 GB, I couldn't reboot with windows7.

  My mac has been set to boot with windows and when I boot the message "No boot device - insert boot disk and press any key" popped up with black screen.

  If I hold the Option key during the startup key, there is no selection record except OSX.

  With disk utility, it is indeed alive, but he did not seem a new partition, instead of empty space - which I have no intention of.

  I read several threads on this problem.

  Because I have no idea of Terminal things, I post a few out of article which could able to shorten your time.

  * diskutil list

  

  * sudo fdisk/dev/disk0

  

  * sudo TPG - vv - r show/dev/disk0

  

  * sudo dd if = / dev/disk0s5 account 1 2 = > dev/null | hexdump - c

  

  The second and fourth result seems quite hopeless...

  Please help what can I do, including throw all hope...

  Forget it. I formatted it.

• Satellite A660 boots up to the black screen with blinking cursor not upper left

  My new Satellite A660-10W sometimes (not always), when turned on, boots up to a black screen with a flashing cursor in the top left. If I stop by pressing the power button, it stops immediately. I then wait a few seconds and press the power button again and then it usually starts very well.

  Could it be updated during this process and I'll be more patient (usually wait a few minutes) before shutting down when this happens?

  Usually something like that shouldn't happen. Satellite A660 is no different from all the other models and OS must be loaded shortly after Toshiba welcome screen appears.
  Do you use your laptop with factory settings or you have changed something?

• Tecra A8-ez8512 freezes on the splash screen after installing Win XP

  Hi guys, this is my first post!

  I recently had an opportunity Tecra A8-ez8512 as a gift that had Vista Business installed (and works perfectly!). As a passionate XP user, I quickly decided to format the WHOLE hard drive and then install XP Pro SP2.

  After the format was successful and cleaned the entire hard drive, I put my xp cd in the drive and rebooted the laptop ready to select the boot cd.

  But now it crashes right on the home screen with no small slider under ratings to select a boot device. I pressed on the key board, but nothing happens.

  I noticed little black dots on the white part of the Intel symbol shortly after. What does that mean?

  Can someone please give me some advice?
  Thanks in advance

  Hello

  No idea what the black little dots on the white part of the Intel symbol might be a graphics card problem? ?:| who knows.

  But I m bit confused said you you formatted the HARD drive first, and then you insert the Win XP disk in order to install Win XP
  How you format the HARD drive without the use of the Win XP disc?

  Secondly, it would be interesting to know if you can install the operating system using the Toshiba recovery disc.

• HP Jet 13: could not get the usable screen after you enter the password when you restart

  After reboot I get the standard wallpaper (like the rings of Saturn), hour, day, week, month, and day, wifi bars and battery.  After the press, I have the icon pushing, my name, email and password.  By entering the password I get the points surrounding white and WELCOME, then by default in the screen with only sûr white pointer visiible.

  That's all new laptop from Amazon and seemed to work well until I have intalled the Office 365 online.  Then I started to get warnings from McAfee on bad files 'try to start', then the blank screen even during reboot.

  Please let me how to restore my system or to whom to return it.

  Thank you

  The model / sn numbers are tiny, but can be: model 13-c010nr sn 5CD50311MZ

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.

  If the above is not correct the problem, try to run the steps in the link below.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/fix-black-screen-displays-after-logging-in-t...

  Kind regards

  DP - K

• Windows XP hangs at startup on the logo screen after modified registry authorization

  I've changed a registry permission setting in WinXP SP2.  Now after reboot, the computer hangs at the boot logo screen. He never to the logon screen. Same thing when I try the Safe Mode or Safe Mode with network.

  Registry permission that I changed was in HP_CLASSES_ROOT. Permissions\Advanced\Permissions: Unchecked "inherit from parent the permission entries that apply to child objects. These entries include explicitly defined here. »

  This is apparently what has caused the problem. I would like to reset the permissions, but obviously cannot access permissions check without going into windows first.

  Help please?

  Thank you - the procedure to restore a damaged registry.

  The reprimand, however, is not necessary.

• I got the blue screen after update

  Hello. I got a bluescreen error after update my entire system today. He wrote:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1030

  More information about the problem:
  BCCode: 116
  BCP1: 85F5C510
  BCP2: 8E813DE0
  BCP3: 00000000
  BCP4: 0000000D
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  And continued to restart every time I went into IE games, etc.
  What should I do?

  Hello

  Have you updated your screen/video or other great drivers latetly - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
  to reset the display driver and recover a time-out has failed.

  BCCode: 116 0 x 00000116<-- read="" this="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  --------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available the onedrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there. (Analysis of thethe)
  Minidumps is not necessary that you have updated the video drivers because it is
  very often the cause of the issue and only if the BSODS continue.)
  

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ---------------------------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
  special meaning (other than pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a period of time
  instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all the)
  possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">