Tecra A8-ez8512 freezes on the splash screen after installing Win XP

Similar Questions

• Computer laptop HP G72 freezes on the bios screen after installing a replacement battery.

  After you have installed a spare battery, my G72-259WM freezes on logo screen or bios of HP. If I tap to shut down the pc, unplug the unit and remove the battery. Then, re-insert battery the pc boots fine. When I stop still, I have to go through the same process. I tested the memory strips to be good and have replaced the HARD drive (the original had questions) to a WD Scorpio Blue 500 GB. Everything works fine once the pc is started. Is it due to being of a batterty of spare parts? or is there anything else that might be causing it?

  Its quite possible that battery is causing this issue since it has never occurred before the battery. Use this link to run a self test on the battery: test of a hard disk by using the Built in Self Test

  Let me know what results you get from the test.

  Thank you
  Sean

• TM2 - Win7 hangs at the splash screen after waking from sleep and hibernation

  I had intermittent problems with the mode 'sleep' on my laptop TM2T-2200 (Windows7 64-bit).  Wake up sleep & put into hibernation, the system will have problems with log-in intermittently.  Generally speaking, I'll be able to move my mouse cursor and enter my password - but pressing enter, the system hangs at the splash screen, requiring a hard - reboot (by pressing the power button).  Sometimes, I've not yet will be able to enter my password before it crashes.

  The problem seems to occur more in energy saving mode, but it occurred in '' HP recommended Mode '' once or twice now, too.  It looks a lot like the problems reported for other models HP here:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DM4-freezes-when-idle-and-after...

  Any suggestions?  Is it possible to know if a particular driver or a program that hangs?

  Update: my problems seem to be associated with protection against malware of Comcast constant guard and disappeared after uninstalling the program.

• Debug build hangs at the splash screen after Update Beta 4

  Since the update of the fall of November, debug builds Dev Alpha hang at the splash screen.

  By release notes, on the basis of known issues:

  "AIR debugger cannot display the IP host dialog box when a debugging session is initiated. This can cause applications to hang at the splash screen and fail to launch. (240219, 242986) »

  A workaround solution is given for people running Flash Builder, where you explicitly give the Debug IP address host instead

  in relying on the auto-discovery.  I use the command line flow (don't have Flash Builder), and my debug builds that were operating out of now drop from September to the start screen. -DebugHost 169.254.0.2, I added to my blackberry-airpackager command and the debug builds always hang.  Release builds signed with my symbolic debugging normally launch, as they did before the update to the decline in November.

  For people who use Flash Builder and who know how to look under the hood and find the blackberry-airpackager command that distributes when you do a debug version: to debug this launch is built successfully

  on a Dev Alpha with the November update, can you please put the blackberry-airpackager command line which

  Flash Builder is running?

  Got a reply from them and they confirmed that the dialogue will be back. Let's make it a part of our test cases in the future.

  See you soon,.

  Dustin

• Satellite L500 - system hung on the splash screen after Windows update

  Hello

  I hope that someone can help you. My Satellite L500 is suspended on the blue startup screen after it restarted after a windows update, the mouse arrow moves and it seems to be a hard disk with a twinkle activity in the system lights. Except that nothing? Any ideas?

  Thank you
  Denise

  Hello

  > hung on the blue startup screen after it has restarted after a windows update
  This means that you get a blue screen after Windows update and more, you can start Windows t?

  You can start Windows in safe mode?

• black screen appears instead of the splash screen after Windows updates

  Hi windows8 has installed and configured the updates. Can connect but the screen goes black instead of the page of the windows application. tried to turn on and turn off the computer, but still happening

  Hello Diane,.

  Thanks for the reply.

  Have you tried to scan Microsoft security running?

  I suggest to do a System Restore and check if it helps. Please follow these steps:

  a. press the keys "Ctrl + Alt + Delete" together, and then click Task Manager.
  b. in the Task Manager, click on "File" and click "new task".
  c. type rstrui.exe in the box, and then click on ok.
  d. click on 'Next' and follow the on-screen instructions.

  Note: When you use the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  I hope it helps.

  Thank you

• Problem with the brightness of the P500 screen after installing Windows 10

  I installed Win 10 yesterday. I can't change the brightness of the display since then.

  I have the latest version of the driver for display, as adapter dated July 2015, which was installed by windows 10.

  I tried to install the old driver for Lenovo site display adapter. But 10 Windows does not accept that.

  I appreciate if you can help me!

  I just installed a driver that solved my problem. Go to this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-other_settings/any-Windows-10-Intel-Core...

  It's wonderful!

• Tecra M10 - 10z - 3 G does not work after installing Win 7

  Tecra M10 - 10z, I installed Windows 7 pro 64-bit
  Everything is correctly configured, but the 3G connection does not work: the message is "no network".
  with Windows XP is ok.

  I can't update the firmware or similar.

  Y at - there someone who can help me?

  TKS

  Hello

  To use the 3 G, you should first check whether the module G ericsson 3 has been successfully installed.
  Where there is a visible yellow exclamation point in Device Manager, the 3G driver must be reinstalled.
  I found on the page of the Toshiba UE driver:
  [Driver Win 7 3 G Ericsson | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 5 & selSeries = 148 & selProduct = 813 selSho rtMod = null & language = 13 & selOS = 30 & selType = 295 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 295 & page = 1 & ID = 71930 & DISO =-1 & driverLanguage = 42]

  Additionally, make sure that the 3 G RF power control utility has been installed properly.
  3 G RF Power Control utility"turns your 3 G at the start.

  This tool can be found here:
  [3G RF Power Control utility for Win 7 64 bit, | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 5 & selSeries = 148 & selProduct = 813 selSho rtMod = null & language = 13 & selOS = 30 & selType = 322 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 322 & page = 1 & ID = 73658 & DISO =-1 & driverLanguage = 42]

  Hope the 3G network functions the reinstallation of these two tools.

• Satellite A200 PSAE6E: Impossible to install the audio drivers after installing Win XP realtek

  Hello...

  Recently, I repartitioned my laptop HD to install XP and kubuntu (it came with vista)... However, I was not able to install audio drivers for its audio devices...

  The laptop is a toshiba Satellite A200-PSAE6E and everest indicates the following audio controllers:

  ATI hd 2xxx hdmi @ ati radeon hd 2600 - controller high definition audio
  Realtek alc268 @ intel 82801hbm ich8m - audio controller high definition

  First I tried to download the audio drivers high definition realtek web site (32-bit version of windows xp). I tried to run the installation, manually navigating to WDM file during the installation of the pilot and navigation manually the folders where the drivers have been copied during the installation under c:\windows\system32\... all to nothing done...

  Then I tried to download drivers toshiba official of the support web site of europe from toshiba for the realtek chip... I've lived the same behavior (both when you run the Setup program and install manually force pilots)

  Then I tried to download the drivers for ATI HDMI audio device from realtek website... with the same results...

  Windows tells me that it was impossible to find a driver in the any of the archives...

  The only thing that could be the culprit because as far as I can tell, is that I installed service pack 3 RC2...

  Any help would be greatly appreciated,
  Tasos

  P.S. I've tried the two automatic installation through specification of a folder and choose the options "I will manually choose a driver from the list" in the hardware installation wizard... the result is always the same... Note that the audio works perfectly under ubuntu...

  P.S.2 IMPORTANT! I recently discovered that toshiba offers bios versions for the A200 PSAE6E depending on if it is equipped with windows xp or vista...

  This refers to which the operating system has been installed when the system was purchased, or the operating system that is currently used? Can I upgrade the Bios of my laptop with the XP version or this break from things?

  Hello

  Regarding the sound issue.
  A lot of people already asked for it here on the forum and my knowledge the driver sound doesn't work because that some Member States the fixes and patches are missing.

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

  You will need to install KB888111 and KB835221 hotfix

  With regard to the BIOS;
  Yes, some series of laptops needs a version of XP BIOS if you want to install and use the XP on the laptop. AFAIK the A200 is one of these series of laptops.

  Good bye

• Windows 7 freezes on the splash screen of Windows - in Recovery Mode, start DVD, Normal start, etc.

  Having a 64 bit Wondows 7 Home Premium on an HP Omni 120-1123w.  It freezes at normal boot and safe mode boot startup.  Get the "Windows is loading files', as the horizontal bar fills from left to right. When the bar is full the screen goes black for a second, then the phrase "Start window" will appear.  And that's all.  No converging balls.  It does the same thing if I boot from a DVD (once I get the message while pressing any key to boot from the disk).   He did the same thing when I boot from a USB flash on which I have installed Windows 7.  He even did the same thing when I hit escape to the Start Menu and press F11 for recovery of the system.

  I try to save anything on the PC.  Obviously something is damaged somewhere.  I don't know where.  I set the BIOS to default level.   I used the start menu F2 to run diagnostics.

  • CPU Test - passed
  • Connection hard drive test - passed
  • Start - passed test
  • S.M.A.R.T test - passed
  • Memory test - passed

  I then ran a sort of HARD drive test in BIOS called a DPS Self Test.   He ran for a long time, but finally passed.
  When the screen freezes, all devices lose power.  All the lights on the keyboard turns off.  If I boot from a flash drive, the flash player will Dim.

  Hello! It seems that you do every thing right and diagnostics of material seems good. IMHO you have a power supply problem or your mother Board has failed. Search

  bulging capacitors. A power supply can go wrong and get out your motherboard. Even if you have the side, turn, try to remove the RAM, using a stick at a time in different locations to see if you can start windows or load the operating system.

  Dokie!

  

• MacBook Air 2015 is stuck on the loading screen after installing the update.

  I installed the updates on my MacBook Air and when I restarted the loading bar would stay right in the middle. I used the disk utility in recovery 'first aid' my drive mode, it was fine. I tried to start in safe mode, but the loading bar cling just at the end I reset the PRAM, but nothing works. Help, please.

  * Loading Bar *.

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

• Computer hangs on the hp screen after installing evga gtx 760

  Central Unit - HP Pavilion HPE H8-1040
  Motherboard - Pegatron IPISB-CH2
  CPU - Intel Core i7-2600CPU @3.4 ghz
  OS - Windows 7 64 bit
  GPU - EVGA Geforce GTX 760
  PSU - evga 750 b
  10G RAM - memory

  What's my GPU compatible with my motherboard?

  Hi random34,

  Did you uninstall the previous graphics driver before starting your PC with GTX card?

  This map requires an 8 pin and one 6-pin. Check your power connections.

  Try to start in safe mode. Press F8 repeatedly at start. Uninstall the incorrect drivers if applicable. Install the graphics drivers from Nvidia.

  Some recent graphics cards require the UEFI BIOS.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo" If the notice is relevant or "Accept as Solution" If your problem has been resolved.

  +++++++++++++++++++++++++++++++++++++++++++++++++++++
  H8 1380 t CTO, Intel i7 3820
  16 GB OF DDR3 MEMORY
  Pegatron Motherboard-IPIWB-PB (Pittsburgh), Radeon HD 7570 1 GB. Win 7 Home Premium set to upgrade to Windows Pro 8.1.

  Want Phoenix 810-150se, Intel i7 4820 k
  16 GB OF DDR3 MEMORY
  Pittsburgh2 motherboard, NVIDIA GTX 645 - 2 GB GDDR5. Win Pro 8.1.

  HP 560z CTO AMD Phenom II X 6 1090 t.
  16 GB OF DDR3 MEMORY.
  Radeon HD 6570
  Win 7 Home Premium set to upgrade to Windows 7 Pro.

  HP ENVY 17 t-j000 CTO Quad Edition laptop. I7 4702mq
  12 GB OF DDR3 MEMORY
  NVIDIA graphics
  Win 8 Pro

• Cooling fan continues to operate on the Z30B Satellite after installing Win 10

  The cooling fan is permanently after the upgrade to Windows 10.
  This is the case for the symmetric mode, but also in ECO mode (activated on the touchpad).

  The two modes are defined in passive when running on battery cooling...

  I tried to activate/disable relevant power settings in Win 10 and the ECO utility, but the fan continues to run: it seems that if Win10 is reversing the Toshiba ECO utility.

  Everything worked perfectly before the upgrade.

  This problem can be resolved, or do I have to wait for an update of the Toshiba utility?

  / Breinholm

  I don't know if it will help, but try to reinstall the ECO utility.

  Visit pleasehttp://win10upgrade.toshiba.com to choose your country and you should be able to find the link for downloading drivers, tools and utilities

• AE crashes after the splash screen

  Hi guys,.

  AE (Version 13.6) starting up normally, but after the splash screen, it freezes into a white screen showing just the menu bar. If I delete all the files in the Prefs folder, it works perfectly.

  I upgraded my computer, all the drivers are updated. My graphics card is a GTX 970 and OS is Windows 10.

  Can someone help me, please!

  See you soon

  Contact Adobe support?

  Honestly, this looks like a graphic driver problem. As I said before, a lot of people had problems with them on the latest version of Windows. They would install the driver the most recent, but for some reason, it did not work. 10 windows and NVIDIA are fighting the driver. I did not get around upgrade to Windows 10, so I didn't really look into it enough to hold people solutions came with.

• Satellite L640 hangs at the splash screen

  Hi all

  I have a L640 / 01 H that I bought earlier this year. In addition to the original Windows 7 OS, I installed a Linux system on a separate partition.

  Earlier today, I was using Linux (which is what I normally use) and everything was really slow.
  Finally I force-shut-down, power button.

  Now, I noticed a problem with the BIOS on this laptop - if I try to start when there is a USB flash drive is connected, the splash screen just hangs. Today when I rebooted I realized that I had left a flash drive, then I got out and I tried to start it again, a couple of times. Whenever the computer crashes just indefinitely on the startup splash screen.

  Finally I gave him enough time and it takes the selection of Linux boot menu, so I tried to start my usual kernel but he gave me some message about a bad MBR.
  I kept trying to start, but the boot process is stuck, what happens is as follows:

  * The three lights on the left (power, battery and light) come on, no problem
  * HARD drive flashes white for a few seconds, then turns off. Occasionally, it will blink again.
  * At the same time, the screen is just stuck on the startup splash screen. If I try to press f2, f12 or any key too many times it will start emitting beeps whenever I press it. There is no way to get into the BIOS settings.

  Also, I can't boot from CD (Windows recovery CD or Linux LiveCD). Finally some kind of time-out of the entry into force, and the computer restarts itself to start the process all. Yay!

  I tried the stuff "unplug the power cord, remove the battery, hold down the power button / stop, plug back in, try to start" but nothing has changed. I also tried switching memory locations (only one chip of RAM, so I can't try a process of elimination on the RAM).
  Finally, I also open the door to HARD disk and removed the HARD drive, then tried to start. This time the BIOS has answered, if only to tell me that there is no appropriate boot media. At this point, the BIOS was responsive and I could change settings in there, but I could not boot from the CD.

  I thought I'd try resetting the CMOS battery, but I'm worried I'll damage something / make the problem worse. Someone at - it ideas? I know that the thing is still under warranty, but service centres are often slow and I don't want to lose the data from the hard drive.

  Any help would be really appreciated.

  > Finally, I also open the door to HARD disk and removed the HARD drive, then tried to start. This time the BIOS has answered, if only to tell me that there is no appropriate boot media. At this point, the BIOS was responsive and I could change settings in there, but I could not boot from the CD.

  It could be a problem with the CD/DVD drive what you think of this idea?
  Perhaps the BIOS does not recognize the CD/DVD drive properly and so there is a problem starting the bootable disc.

  In addition, it might be possible that failures of HARD drive and, therefore, you received an error message about the MBR (master boot record).

  Remove the CD/DVD drive and try to install the Windows booting from a USB flash drive.

  _Regarding the battery CMOS: _
  I would not recommend to disassemble the laptop because you could damage other parts and in addition it should know that the CMOS battery is not removable it s soldered to the motherboard