Boot Unmountable - Stop volume: 0x0000000ED (0x82B567B8, 0xc0000006, 0x00000000, 0x00000000)

Similar Questions

• Stop error 0x000000ED (0x82A89850, 0xc0000006, 0x00000000, 0x00000000) try to repair windows from the installation cd

  I get this error for "unmountable _Boot_volume.  I read all the tips and suggestions.  I tried to repair Windows using my Windows installation CD.  And it does not work.  Any suggestions?

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/297185

  It will be useful.

• Windows is stopped on the boot unmountable boot tech info volume 0x8a7ca368, 0xc0000006, 0 x 00000000, 00000000 0

  on Xp, blue screen with start windows closed to avoid damage

  Unmountable _BOOT_VOLUME, but also an Info page including remove any newly installed hardware or software, which is not based in my case.

  Info technology stop: 0x000000ED (0xC0000006, 0x00000000, 0x00000000)

  DOE, anyone is able to interpret and advise what to do?

  Here's a nice thread resembling the issue you describe:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/unmountable-boot-volume-stop-0x0000000ed/570c7f90-5869-E011-8dfc-68b599b31bf5

  She even has a happy and after ending a cycle message...

• Blue screen - UNMOUNTABLE_BOOT_VOLUME STOP: 0x000000ED (0x8A93D590, 0xC0000006, 0x00000000, 0x00000000)

  Original title: I'm trying to start Windows XP after getting the Blue Screen of Death

  Here are the specifics on the BSOD:
  UNMOUNTABLE_BOOT_VOLUME STOP: 0X000000ED (0X8A93D590, 0XC0000006, 0X00000000, 0X00000000)

  I started on the boot CD after changing the order in the BIOS.  Run the test fast and got this error:
  0F00:1344 error code
  MSG: Block 413906: error impossible to correct data or media is write protected
  Any suggestions on what to do next?

  First, store the boot CD.

  Secondly, because we know nothing on your system, you could tell us about it.

  Third, follow the directions in this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/unmountable-boot-volume-stop-0x0000000ed/570c7f90-5869-E011-8dfc-68b599b31bf5

• STOP: 0x000000ED (0x84A32900, 0xC0000006.0x00000000, 0x00000000) - unmountable_boot_volume

  Original title: does not start in any mode

  tried to boot the computer. When the windows screen appears, need me the safe mode, last known configuration normal screen start windows. tried the F8 trick and disabling auto reboot system error. took me a blue screen with an error message. unmountable_boot_volume said. also shown on the blue screen "tech info: STOP: 0x000000ED (0x84A32900, 0xC0000006.0x00000000, 0x00000000).

  Hello
   
   
  You can follow the steps listed in the articles below and check if they help us get started on the desktop.
   
  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".
  http://support.Microsoft.com/kb/297185
  
  Unmountable Boot Volume
  http://support.Microsoft.com/kb/555302
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• STOP: 0X000000ED (0X8A930900, 0XC0000006, 0X00000000, 0X00000000)? Help!

  Ok. So, I got this labtop that I threw in my closet because it has stopped working, I tried to use new and this blue screen with the error code, recently STOP: 0x000000ED (0x8A930900, 0xC0000006, 0x00000000, 0x00000000) I fergot my admin password recover so it is almost impossible with the start of the CD. Help please?

  Hello

  something about the control bug 0xED is here:

  http://msdn.Microsoft.com/en-us/library/ff560355 (v = VS. 85) .aspx

  (Which indicates that the IO subsystem attempted to mount the boot volume and it failed)

  So, if you have not the administrator password, only you can do - disassemble the HARD drive of your laptop, insert it into another computer and run the CHKDSK command from the command prompt:

  CHKDSK x: /f

  where x: is the HARD drive volume

  This could help you, how to run the command prompt and the command CHKDSK:

  http://support.Microsoft.com/kb/315265/en

  LC

• Blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  I have my Acer 5920 laptop, 2 GB of RAM and 160 hard drive, last stop system time correctly with all the files to day, but when I restart then comes windows XP Jean-Christophe and then a blue screen with the error. Nor I have install new software or remove something in the laptop. My system was perfect, and that was before the last stop.
  I have Windows XP SP2-teacher-pack. I have the original CD of this package.
  But when I use the CD then nothing is happen and come same messgae of error. I do not have any other CD bootable for windowXP except your originalCD.
  Please suggest me what I should do to fix my probem. I'm not to much expert for the formatting and other things computer.

  After reading your following suggession:
  Here are a few things to try:
  The first thing to do is to boot your system and start pressing F8 as soon as it starts booting.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let it restart.  When it starts, it can now stop with an error screen and give an error message and code.

  Disconnect all external devices (printers, USB Hub, drives external, etc.) and try to start.

  I got the result of the error that comes on a blue screen after you follow your process-blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  Thanks in advance for help
  What about nice Rajneesh

  Just one quick response for others...

  Go to your bios to change the mode of training of your s - ata AHCI or IDE Compatible mode or all that apply :) Windows XP is not like SATA, because it has no native support for it. At the start of the second phase of a Setup program, it would fail with this BSOD.

  Also read the following Microsoft article that describes many other causes (including file system damage):Troubleshooting of errors "Stop 0x0000007B" in Windows XP Advanced

  Sometimes, your BIOS will provide its default settings after a system crash or a configuration. Should not happen, but it is...

  For BIOS-discussions, see: 0x0000007B 0xBA4cf524 - Forum of Support PC - Free Computer help , XP installation: * STOP: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000)? - Page 4 - Cyber Tech Help Support Forums , 0x0000007B (0xBA4CF524 - Google zoeken .)

  Have fun, and... Peace!

  Devvie

  ~ ~ ~ * E-mail address is removed from the privacy * ~ ~ ~

  CONARE nullius momenti videri fortasse missilibus careant
  ------
  All the spelling mistakes are my own and may not be distributed under the GNU General Public License! -(© 95 1 by Coredump; 2-10 by DevNullius)

• Blue screen... STOP: 0x0000008E (0xC0000005, 0xBF8B6C11, 0xA9538368, 0x00000000) win32k.sys - address BF8B6C11 base address BF800000 DateStamp 4C7d06ce

  I have a Dimension 3000 bought in 2005, upgraded to 2 GB of RAM.

  I recently implemented almost from scratch, because Opera program and profile would be repeatedly corrupted, making me lose the email. (This reappeared even after reinstall opera clean, do not use old messages or other profile files). Therefore, I restored a backup of the C: partition Ghost (there are others for my data and downloads) I did shortly after the purchase, after which I had installed only Ghost and two games (I uninstalled the games). I installed SP3 and ran Microsoft Update. I was trying to reinstall other programs that I use now. It's Rhapsody; one of my kids 'synchronize' a player MP3 Sansa Fuze with Rhapsody.

  A few days ago when closing Internet Explorer, I got a message that should be closed and I could send a report to Microsoft. It is also used to happen before, from time to time.

  Then, more recently, when I closed Rhapsody, I got a blue screen with a message that there was a problem. He said I could try to change some settings in the BIOS. I remember what happens before I restored the ghost of 2005 BU. I looked in the BIOS and not able to find the parameters referred to in (something like memory cache). I wish it were possible to print these messages on a blue screen. I didn't copy the entire message, but I write these references:

  STOP: 0X0000008E (0XC0000005, 0XBF8B6C11, 0XA9538368, 0X00000000)

  Win32k.sys - address BF8B6C11 base address BF800000 DateStamp 4C7d06ce

  This means almost nothing to me. I hope that someone on the forum knows what this means and can suggest what could be the problem.

  So far, I have not had more wrong with Opera, so there may be two distinct problems. OTOH, I reinstalled only Opera on 10/12/10; I can still have problems with it.
  

  Hello

  Here is more information on the bug 0x8E control: http://support.microsoft.com/kb/945658/

  The 0x8E KERNEL_MODE_EXCEPTION_NOT_HANDLED can be caused by a faulty service/driver, damaged hard drive or defective display card not enough space, or memory, Hardware/software incompatibility and third-party remote control software. So to get started:

  1. test your memory. Run Memtest you can download from http://www.memtest.org/#downiso. Download the ZIP file, extract the ISO and write on CD. Once written to CD, boot your PC with the CD and run Memtest. Allow the test to run by at least 3 passes or until it gives errors. If you have more than 1 memory module, run the test on each module separately. Try running Memtest from a cold - start unplug your PC for an hour to cool down, then immediately run memtest again when you next turn on the. This way memtest will run when the memory is cool and after the 3rd pass when the memory is hottest.

  2. update your display driver. Reference Dell seems to have highlighted 3 different models of Dimension 3000 and so there is 3 different Intel display drivers. See if you can find an updated driver on the Intel Web site. If you use a graphics add-on card try to find an updated driver from the manufacturer's website. If you have any trouble finding a driver let us know what brand and model of graphics card you have.

  3. update the Rhapsody software. (I think it's the software you using http://www.rhapsody.com/-software ?). If it's Rhapsody software I think it seems to integrate into your Web browser and it's perhaps why Opera and now IE are mistakes? You can uninstall Rhapsody for a while just to see if it is the reason for your BSOD.

  4. when the 0x8E BSOD is caused by win32k.sys, yours, is it then possible, it is caused by control software remote third. It can include programs such as VNC, PCAnywhere, etc. of Teamviewer, RAdmin.  If you use one of these programs, uninstall it and see if the PC stops mistakes.

  5 run a scan on your hard drive. You can check your hard disk for errors by going toStart ->Run -> type chkdsk c: /r -> clickOk . When asked if you want to force a sayNodisassembly. When asked to plan the audit at the next startup, Yes. Reboot your PC to allow running chkdsk.

  Alternatively, you can run a diagnostic on your hard drive. This by downloading the diagnostic program from your hard disk manufacturer. A list of manufacturers and their diagnostic tools can be found here: http://www.tacktech.com/display.cfm?ttid=287. Once more, download the ZIP file, extract the ISO and write to CD. A time written on CD, boot your PC with the CD and run the test Advanced/extended.

  Also make sure you have enough hard disk space. It is always recommended, if possible, to have at least 15% of your free hard disk capacity.

  6. Finally, take a look in your event viewer when the BSOD for possible errors. You want to look especially in the system and Application logs (and maybe Internet Explorer connects). You can run Event Viewer by going toStart ->Run -> type eventvwr.msc -> pressOk -> event viewer screen opens. If there are errors listed in one of the newspapers type them in your next post if you are not right.

  Reading your post I see 3 specific issues, that you might want to focus:

  -The memory you added (run Memtest) and hard drive (run Chkdsk)

  -The Rhapsody program - try to update or uninstall.

  -The software was initially corrupted until you make the first image after the purchase. So you just ghost the problem on.

  I hope this helps. Good luck.

• Get the Blue error screen when starting the computer XP, stop: 0X0000007B % 20(0XF789E524,0XC0000034,0X00000000,0X00000000)

  I get the same code at startup until you mean?    Stop: 0x0000007B % 20(0XF789E524,0XC0000034,0X00000000,0X00000000)

  0x7B bug check code
  http://msdn.Microsoft.com/en-us/library/ff559218 (v = VS. 85) .aspx

  The boots are sometimes successful and sometimes not?

  If you you do not want to lose any data, make sure you take a backup on removable media before trying to solve the problem.

  Select Start, run, type cmd and press ENTER. Type "chkdsk c: /f /r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter Y when asked if you want to run chkdsk on restart the computer. Quit and then restart the computer.

  Marking bad sectors on a hard disk takes time so be patient. Delimiting does not repair a defective sector. He places pointers to the reader by saying the system not to read or write to these areas that have been damaged.

  If the number of defective sectors continued to increase after using the procedure above several times, then you should replace the disk. If an important system file is written to a bad sector, you can corrupt the registry hives and lose the entire contents of the disc.

  However if have run chkdsk you not see more new bad sectors, then the reader can work for you for years.

  What is your computer brand and model? You have a Windows XP CD? It's a detail. Generic OEM or OEM brand copy. Suppliers of computers brand often give users a copy of Windows to a recovery partition. That applies to you?

  Take a look in the system log in the errors and warnings event viewer and post here the copies. Do not post on more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

• Errors Stop: 0X0000008E (0X9F266F91, 0X942F5F64, 0XC0000090, 0x00000000) while using Dragon Naturally Speaking v.10

  Original title: * stop: 0X0000008E (0X9F266F91, 0X942F5F64, 0XC0000090, 0x00000000)

  I have xp professional sp3 on a laptop that I bought for the College and try to use Dragon Naturally Speaking v.10.  I have the program loaded and am able to open it and to do the two micro checks, but when I try to start the windows training part stops and gives me the above stop error message. I used v.9.5 DNS on an older desktop with xp with sp2 and never had any problems.  What is the difference and can something be fixed so that I can use v.10 on my laptop?

  Hi Markiepoo,

  Method 1:

  You try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/310353

  If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.

  After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.

  Method 2:

  If you're still having problems, then try to uninstall and reinstall the program.

  a. Click Start, click Control Panel and then double-click Add / Remove programs.

  b. in the currently installed programs, click the program you want to remove and then click on remove.

  c. If you are prompted to confirm the removal of the program, click Yes.

  d. restart the computer and reinstall the program.

  For more information, see the following article:

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Also check out the following link and check if it helps:

  http://social.answers.Microsoft.com/forums/en-us/xpprograms/thread/e2b985ce-9a26-41D4-99e5-a5924b0b2180

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• stop: (0x000000f7 0x8039989a, 0x90e37b56, 0x6f1c84a9, 0x00000000)

  My laptop - ACER extensa 5230th was involved in this accident.  Help someone?

  stop: 0x000000f7 0x8039989a, 0x90e37b56, 0x6f1c84a9, 0x00000000

  Hello

  ·         What exactly is the problem you are having?

  ·         What is the full error message that you receive?

  ·         When exactly are you having this problem?

  ·         You did changes to the computer before this problem?

  Method 1:

  I suggest you to search for the cause in safe mode and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If the problem does not occur in safe mode, and then try to perform the clean boot and check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  You can also check the reference article below:

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: The article above also apply to Windows Vista.

• Dimensions 4700 0x000000ED 0x8131FE30 0xc0000006 0x00000000 0x00000000

  I'm new and do not know what information you need. When I turn my 0n 4700 I get this and it won't do anything, please help me solve, because my warranty is expired. Thank you very much!

  Stop: 0x000000ED 0x8131FE30 0xc0000006 0x00000000 0x00000000

  When I go to the splash screen? I get this message:

  0 7 drive Fail return code

  Disk 1 no device

  Player 2 Diagnostics not supported

  Disc 3 no device

  Message edited by simpletruth 05/31/2008 23:32
  
  

• STOP: 0x0000008E (0xC0000005, 0xBF9568C8, 0xA6864C00, 0x00000000) win32k.sys - address BF9568C8 base at BF800000, Date stamp 4ff2f633

  Hi, I get a blue screen frequently with the below error message.
  "Technical information:
  A problem has been detected and windows has shut down to prevent damage to your computer.
  
  
  STOP: 0X0000008E (0XC0000005, 0XBF9568C8, 0XA6864C00, 0X00000000)
  Win32k.sys - address BF9568C8 base at BF800000, Date stamp 4ff2f633
  
  
  Beginning physical memory dump.
  Complete physical memory dump.
  For more assistance, contact your system administrator or technical support.  "
  I am using Packard bell Easynote MX45.
  XP Home edition Version 2002
  SP3
  Inter (R) CPU [email protected] GHz.
  3 GB Ram
  could someone help me fix it please.

  N

  You are better able to tell us if the problem is resolved.  Continue to run Malwarebytes about once a week.  If the BSOD ceased and MBAM does not show any other infection, you're probably good.

• STOP: 0X0000008E (0XC0000005, 0X805662D1, 0XB38CDA04, 0X00000000)

  Tonight, my computer shuts down with a blue screen with a message saying that there was a problem with Windows, more this stop message...

  STOP: 0X0000008E (0XC0000005, 0X805662D1, 0XB38CDA04, 0X00000000)

  I have managed to restart in Mode safe for this post, but am not all that computer warned to manage a technical difficulty.   Is there a simple solution that I can use for this problem, or is a trip to my computer that required doctor?

  I have not loaded new software in the past few days and have now uninstalled the latest program installed, just in case.

  When I tried to send an error report, it wouldn't send it due to a problem.

  Any ideas?

  Thanks in advance,

  Andrea

  It can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• Stop: 0 x 00000050 (0xf05c371c, 0x00000000, 0x804e70dd, 0x00000000 during installation of Windows XP.

  Original title: 0 x 00000050 (0xf05c371c, 0x00000000, 0x804e70dd, 0x00000000

  Stop: 0 x 00000050 (0xf05c371c, 0x00000000, 0x804e70dd, 0x00000000

  Can someone help with this error.

  I have a model Assembly, so that the installer of Windows XP (sp3), this error occurs.

  Hi Sameer,

  You can follow this link & check if the problem persists:

  "Stop 0x0000008e error code" or "Stop 0 x 00000050 (PAGE_FAULT_IN_NON_PAGED_AREA) error code" error during the installation of Windows XP

  Hope the helps of information.