Boot Windows 8.1 Secure message

Similar Questions

• INACCESSIBLE_BOOT_DEVICE on Windows 8 with Secure Boot (Alienware x 51 R2)

  Hello

  I have a desktop R2 of Alienware x 51 and when I first bought it came with Windows 8. Long story short, I decided to install Windows 7 instead and for that I had to disable the secure in the BIOS boot option. Now I decided to install DOS Windows 8 and it worked and everything, but when I turn it back on Secure Boot it gives me a blue screen with the message: inaccessible_boot_device.

  So I don't know what to do here. Basically, what I want is to have Windows 8 on my computer with secure startup, commissioning. I don't mind not duty re - install Windows 8 given that I didn't restore my backups but I always try to solve this problem. Any help would be greatly appreciated.

  Hello

  I re-formatted my computer last night and ended up resolving this issue so I thought I would update this matter with my solution.

  Basically, I followed this guide:

  www.eightforums.com/.../38486-need-help-formatted-genuine-Windows-8-Lenovo.html

  With the help of the media Windows Installation tool, I was able to install Windows 8.1 Secure Boot with UEFI active. Please note that I used a USB Flash drive and not a DVD, apparently, it makes the whole process better somehow.

  Thank you for your help and time of Milena and Naomi!

• I get a message "the parameter is incorrect" when I try a Windows Media Player security upgrade. What I'm doing.

  I get a message "the parameter is incorrect" whwn I try a Windows Media Player security upgrade. What should I do?

  Hello

  1 have. what security update you tried?
  2. in addition, what version of Windows Media Player you have?

   
   
  Try these steps and check.
  a. Click Start and type cmd in run and press ENTER.
  b. in the type guest following command press ENTER.
  WMP.dll regsvr32.exe.
  c. close the command prompt and start Windows Media Player and check.
   
   
  I hope this helps.
  
   

• Whenever I boot Windows XP (fully updated), I get a message saying that 'wasuoba.dll' is missing. I can't find any information what so ever on this .dll file any where. Help, please!

  Whenever I boot Windows XP (fully updated), I get a message saying that 'wasuoba.dll' is missing. I can't find any information what so ever on this .dll file any where. Help, please!

  As I said, my Windows XP is fully updated. I get this error for a while now, so not sure what has caused it and when I started to do.
  In general, I was ignorant, but recently my PC feels like it becomes less stable.

  I'm surprised that it returns no results on any search engine.

  Whenever I boot Windows XP (fully updated), I get a message saying that 'wasuoba.dll' is missing. I can't find any information what so ever on this .dll file any where. Help, please!

  As I said, my Windows XP is fully updated. I get this error for a while now, so not sure what has caused it and when I started to do.
  In general, I was ignorant, but recently my PC feels like it becomes less stable.

  I'm surprised that it returns no results on any search engine.

  Assuming that your spelling is correct, your computer is probably infected by malicious software. Download, update and perform a quick scan with Malwarebytes.

  Malwarebytes.org

  How to use Malwarebytes

• I have a problem connecting to the internet. A windows security message appears requesting a user name and password.

  network/security problem

  I have a problem connecting to the internet. A windows security message appears requesting a user name and password. I spoke with my internet provider and they say it's problems with windows. Administering the computer was an old laptop that isn't in use anymore so I can't change the admin settings. Is that what you can offer and do you need more information about me?

  How you connect to the internet, dsl / comcast / wireless.

  The installation disk of your ISP to the main computer, then put it to the top with a modem what ever, after that you can reload the disc of routers and probably have to reset the default password,

  Once you get the configuration of your Internet service provider again then your router again you can re - enter the wireless or wired computers to the new network,

• Re: EQuium A100-147, does not boot, \windows\system32\config\system - lack-

  This laptop Equium A100-147started does not connect to the internet normally, but she in safe mode.

  So, after trying the virus scans-nothing.
  Restoration of the system-nothing. I decided to put in the recovery disc and reinstall windows media.
  I changed the boot sequence to install, boot sequence changed to original.

  He has reinstalled but won't get to the Windows screen, a message came \windows\system32\config\system-manquant or damaged.
  I can't see even a way to do a repair with this recovery disk?

  Any help would be appreciated

  Thank you in advance.

  This error means that the registry is damaged.

  The registry consists of the following files:

  c:\windows\system32\config\system
  c:\windows\system32\config\software
  c:\windows\system32\config\sam
  c:\windows\system32\config\security
  c:\windows\system32\config\default

  You can restore these registry files in the restore folder of the system hidden on the C: drive.

  Here are the instructions:
  http://support.Microsoft.com/kb/307545

• Dual Boot windows Linux 8.1 on Pavilion 17-e157eo

  Will there be a completely safe way for a dual-boot Windows 8.1 and Linux on a Pavilion 17-e157eo?

  I searched the dualboot topics, but solutions do not seem to apply in this case.  Secure boot has been disabled. Quick start has been disabled. In this PC disk partitions are not dynamic but simple.

  Starting from a Live Linux DVD results in a blank screen even if the DVD player is clearly read something.  Is the problem due to the fact that this PC has the INTEL 4600 graphics chip and an AMD Radeon 8670 M?

  A better solution would be to use VMware or VirtualBox, set up a Linux guest operating system, the host system is of course Windows 8.1?

  No problem, glad I could help. If you could mark one of my posts with an acceptable Solution and congratulations if this information was useful, it would be much appreciated and it would be useful to other institutions. Thank you and have a great day!

  Mario

• Update for Windows XP (KB946648) security failed!

  This update has been bothering me for MONTHS maybe ONE ANY YEAR! Every day in the lower right corner of the screen I get a message "updates are ready for your computer must be installed." I click on install and every time I try to install the following updates could not be installed says:
  Update for Windows XP (KB946648) security. I even tried to manually download the update from the microsoft Web site and then update the pc, but it says that a file is missing. HOW to upgrade this file...? It drives me crazy.

  Hello

  Since this is a security update, you can get free Support
  http://www.Microsoft.com/protect/resources/support.aspx

  You can HIDE probably comes from the update.

  More help here by experts XP

  XP newsgroups
  http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Update for Windows XP (KB2686509) security is not installed

  Kb268509 update will not be installed. I get no error message #, I tried the selective startup in msconfig and disable all Microsoft services on the services tab, and I get a BIG red X saying could not check c:\windows\kb268509.log, I searched my computer, microsoft, web for failure message # and nothing. Please help summer try everything I could find for problem including microsoft fix it and no problem help. Thanks for any help. Paul * address email is removed from the privacy * .

  Please open your control panel > programs feature add / remove and check that all other Windows XP updates security for may 2012 (i.e. KB2676562 + KB2695962 + KB2659262) all are listed. If only KB2686509 is missing (don't not listed as installed) you can go to your Windows directory and search for a log file named: faultykeyboard.log

  You can now go to this thread (KB2686509 repeatedly fails with error 0x8007F0F4 code) where you have 3 options to resolve this problem:

  (1) glance to 2nd marked "Answer" Post (of Christian S.) and try to run its new VB Script (at your own risk - if necessary) as described in this report.

  OR...

  (2) search the marked 1st Post "Answer" (from Susan B.) and try to determine which of these scenarios you are. So far, there is - at least - three types of different errors that would make the KB2686509 update fails with error 0x8007f0f4 code,.

  OR otherwise - if neither works above...

  (3) try to contact Susan Bradley (provided email in even mentioned thread) that she is wanting to offer his help in what concerns failure to comply with this update to install - as long as you have found your faultykeyboard.log file.

  Hope this helps - good luck!

  ================================================================================

  PD. -Please don't forget to come back here and tell us how it happened :)

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• Windows Live account Security Code this 1 here is the code you requested: 2560007, second 6292048

  IM receiving this message twice

  Windows Live account Security Code this 1 here is the code you requested: 2560007, second 6292048

  Hello

  The question you have posted is better suited in the Windows Live community forums. Please visit the link below for any further assistance.

  http://windowslivehelp.com/

• Update for Windows XP (KB2509553) security will not install starts but will not end

  Update for Windows XP (KB2509553) security is not installed

  Hi RogerGreene,

  1. Did you the latest changes on the computer?
  2. You are able to install some other updates on the computer?
  3. You have security software installed on the computer?
  4. You receive an error message when you try to install the update?

  Method 1

  I suggest that you manually download and install the update, check if it installs properly.

  Update security for Windows XP (KB2509553)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=16350

  Method 2

  If the previous step fails then I would suggest that reset you the Windows Update components by default and then try to install the update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Start the computer by using the Microsoft Windows XP recovery console, and then perform a check disk on the file system.

  To do this, follow these steps:

  1. Insert the Windows XP CD in the CD-ROM or DVD - ROM drive, and then restart the computer. Select the required options to start the computer from the CD-ROM or DVD - ROM drive if you are prompted to do so.
  2. once the Welcome to Setup screen appears, press R to start the Recovery Console.
  3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
  4. When you are prompted to do so, type the administrator password and press ENTER. NOTE: In Windows XP Home Edition, the administrator password is blank by default.
  5. at the command prompt, type the following command and press ENTER: cd system32
  6. type the following command and press ENTER: chkdsk /r /p
  7. remove the Windows XP CD in the disc drive.
  8. Type exit to restart your computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• Picked up a virus and the system restore but now used when logged on obtaining a C:\windows\system32\rundll32.exe message trying to access some of the programs? Help!

  Part using the computer seems to have picked up a virus. Another person signed and restore the system. That seems to have stopped virus but when the person initially tries to use their sign on happens c\windows\system32\rundll32.exe message when it tries to access some programs (check mcafee, visit the center of security etc.) when you try to open some programs on the main screen, it says "choose program to open this file" mcagent.exe.   Any help would be appreciated.

  Hello

  It seems that the virus is not completely removed. I suggest that refer you the link to retrieve the computer of infection and check if it helps.

  Computer viruses: description, prevention, and recovery

  http://support.Microsoft.com/kb/129972

  Let us know if it helps.

• Windows Media Player Security Upgrade that a problem occurred during extraction of the machine ID DRM. Contact Microsoft product

  Original title: Windows Media Player Security Upgrade

  Recently, I tried to download an Audio Book using Overdrive Media Console software.

  Within this program, I tried to use the 'Windows Media Player Security Upgrade'

  However, this tool has produced a message "this is a problem in retrieving the machine ID DRM. Contact Microsoft product
  supported". I tried to find the appropriate place to make the recommended contact. These research "Genuine Microsoft - Site diagnostic" quoted me the button solve led me to "Microsoft Software plug-in for your Mozilla FireFox browser. However downloading and running that plugin has not helped solve the problem!

  I use XP Home Sp3 and Media player 11.0.5721.5280

  Can anyone suggest a solution?

  Thanks in advance.

  Antoine in TN

  Do you mean the Update button?

  You can try to reset the DRM system, by following the instructions at http://support.microsoft.com/kb/929642 .

  Tim Baets
  http://www.BM-productions.TK