Boredom of pre-start to logon

Similar Questions

• Client VPN 3.6.3.B - start before logon - connection fails immediately

  It is the most extraordinary and I can't decide if the problem is with the VPN, Windows 2000 Dialer, the Toshiba Tecra 9100 or a combination of both.

  The problem happens when 'Enable start before logon' is ticked on and I try to dial up the ISP before logging on to Windows. When you click the button to connect, the historical connection window immediately:

  Initializing the connection...

  Cannot establish a connection with your ISP.

  The modem never seems to receive the command to dial a number.

  Other specific comments:

  1. If I'm already connected to standalone Windows on the laptop (i.e. not connected to a local network), the VPN dialer works perfectly and I am able to establish a tunnel (although I can't authenticate with a domain controller)

  2. on this same machine with the same version of the VPN Client, I have not experience this problem when Windows XP has been installed. (I hate XP that is installed on the new machine. I downgraded to Windows 2000 SP2 After reformatting the hard drive.)

  Everyone knows about this problem? Does anyone have suggestions for troubleshooting?

  Hello

  I you suggest trying to create a new entry for remote access for the access provider (using the dial-up connection to the Public Network option), and then try to use NFP, or on the other hand you can try creating a new vpn connection entry and then try that as well.

  This feature works fine with 3.6.3 client versions.

  Thank you

  AFAQ

• ProBook 430 G2: Problem of pre-start for the HP disc encryption

  Good evening

  I have a problem with the HP drive encryption. I activated it (drive encryption and Pre-boot authentication) but it took a lot of time, so I decided to do a cover (the player was not entirely encrypted). However, I still have the problem with authentication pre-seed. Is there a way to disable it? When I try to launch Windows Security Manager, I have an Assistant and the drive seems to be decrypted, so I can't disable the start-up aunthetication.

  After the reset in the BIOS settings, I managed to solve the problem

• change of password blocked by objection of pre-start but have no pre-boot password

  In Windows 7 when I - administrator - try to change password I am prompted with the message that pre-seed opposes my new windows user password, but I did not start with a pre-boot password.  Then the process continues with nothing accomplished.  How to spend it?

  The message is generated by HP protect, not by Windows. You need to consult the FAQ from HP or send a note to the HP technical support. You can also search Google with these keywords:

  Pre-seed 'HP Protect' security

• Skype won't start no-logon screen

  I just installed Skype on my computer Windows 7 Samsung, and every time I open it I'm gretted with a white screen logon that simply says Skype through it. This has happened with previous versions of Skype as well, and I don't know why. I've attached a screenshot of what I get.

  For those who need to know, my specs are:

  -2.40 GHz Intel i5 450 M processor

  -8.00 GB RAM DDR3

  -Windows 7 64 bit

  Laptop - Samsung Q430

  Thank you!

  

  Now try to IE10 to uninstall and reinstall IE9.

  In order to uninstall IE10, you should go to the Windows Control Panel-> programs and features-> view installed updates-> Microsoft Windows-> Windows Internet Explorer 10.

  http://techdows.com/2012/11/how-to-downgrade-from-IE10-to-IE9-or-IE8-Windows-7.html

• I want to put two applications to auto-start on logon [XP]. Can't seem to understand this. Help, please.

  I am running in classic mode, but can run in XP mode.

  It depends on the requests.  Some applications can be configured to start when Windows starts by using an option in the menu 'Options' or 'Preferences' of the application.

  If not, just put a shortcut to the exe of the application in the startup folder.  Here's a way to do it:

  1. create the shortcut

  • Right-click on an empty area of the desktop and select new > shortcut
  • Click the 'Browse' button, navigate to the application exe file, usually in C:\Program Files\ and click OK
  • Click next
  • To change the name (for example, delete the .exe and capitalize)
  • Click on finish

  2. click and drag your new shortcut to the right side of the desktop temporarily.

  3. click on start > all programs, and then right-click on start and select open

  4. drag your new shortcut in the startup folder and close the file

• Start before logon functionality

  Hi all

  I have a customer who wants to start before Anyconnect VPN connection. I can't find anything on the user experience. Is it possible to make the process transparent to the end user so that they only connect once to Windows and it will take these credentials to connect to Anyconnect as well? Do I have to use certificates for authentication? Also, is there any gotchyas I need to know?

  Xavier,

  The user normally connects, the client automatically downloads the Gina Module (EPP) and the XML profile with SBL option set to true (this during the login process).

  If the user does not notice this process.

  Keep me posted.

  Portu.

  Post edited by: Javier Portuguez

• Explorer.exe does not start at startup, and it does not display beyond the logon screen?

  I have a friends Compac laptop and he managed to stop loading explorer.exe when starting after logon is complete. I can't for the life of me remember what I have to do to restore this process in the startup routine so that his office will be in charge. He has an extraordinary number of startups, but he managed to remove this (essential) program, especially in lists of useless junk that is responsible.

  It's a compact with an Intel processor running Vista and of course it doesn't have the ERD. There is a recovery on the hard drive partition and if I knew how to use it, maybe this would a repair option, but I'm not clear on how to use either because there is no literature or what he had with the computer. By way of explanation, he is a foster child and had been tossed around a lot, so it's not too surprise that it doesn't have any of these materials.

  Go to this site and download the tool in a removable device like flash memory:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  And then start your PC and press the F8 key repeatedly and start in safe mode and then run the tool of flash and complete analysis of the system memory.

• Satellite C660 - the mouse pointer stops working when you start program

  Some features:
  Toshiba Satellite C660-1r1
  Windows 7 sp1
  Avast Antivirus (free version)

  Problem:
  When I start a program (for example. Sonos controller) on my laptop my mouse pointer stops working. It does not happen with all programs! When I go into Device Manager, my synaptic touchpad and my hid mouse is working also. When I press ctrl - alt - del, the pointer can move again, but when I come back it stops again. I have a work around is not a solution

  When I disconnect my windows account and log in again, it will solve the problem. When I start a program again the pointer will freeze up again.
  I did a complete system of virusscan and a pre start virusscan and my laptop is virus-free.
  I uninstalled the mouse and in drivers reinstalled synaptics them but that has not worked. I added a new account windows but that did not work.
  By pressing the keycombo FN + F9 has no effect.
  I am somehow at the end of my ideas...

  Can anyone help!

  When I start a program (for example. Sonos controller) on my laptop my mouse pointer stops working. It does not happen with all programs!

  This problem happens using the touchpad only or have you noticed the freezing of cursor using the external USB mouse too?

  What is the notebooks touchpad works properly without loading and using this 3rd party software?
  For example, work the touchpad with Microsoft office (Word, Excel, etc.) or navigation in internet by using IE or Chrome?

  My guess is that the pre-installed 3rd application part could affect the functionality of the touchpad.

• Satellite L655-178 - which partition will be available to start?

  Hello

  My Satellite L655-178 comes with active EFI Insyde H2O Bios. Apparently this BIOS needs to access the HARD disk before starting Windows. Nobody knows in which partition occurs this pre-start HARD drive access?

  My laptop has 3 partitions on a 500 GB HARD drive
  -400 MB Hidden Partition (without drive letter assigned)
  -C: Windows Partition
  D: a Partition of data (with HDD recovery)

  My guess is the Insyde H2O Bios to access the Pre-boot 400 MB hidden partition?

  Am I wrong?

  Thanks :)

  Hey,.

  Your question is interesting, but may I ask why is it important? Serious errors on your laptop?

  Well, first of all, you know that the 400 MB hidden partition is not the boot partition. It contains only the files of Windows recovery environment and cannot be accessed during boot I think. Just read this article:
  http://en.Wikipedia.org/wiki/Windows_Recovery_Environment

  As you can see, it s a Windows feature and has nothing to do with Toshiba.

  In any case, the start player C: partition will be accessible for on this Windows partition is installed. All that s!

  But until Windows starts, the BIOS HARD drive search internal, but it doesn't have access to all data of it. The BIOS simply check if an internal HARD drive is installed and it is indifferent to what you have on it of the partitions.

• Vista won't start no-repair system restore/start cannot set

  Have Vista running on Dell Inspiron 1720. All of a sudden I can't start Windows. Startup Repair cannot fix the problem and restore the system can not solve the problem either. Begins to panic.

  Startup Repair listed the following as the details of the problem, but it leaves me clueless.

  Problem event name: Startup repairV2

  Signature of the problem 01: AutoFailure

  Prob Sig 02: 6.0.6001.18000.6.0.6001.18000

  Prob Sig 03:6

  Prob GIS 04:786444

  Prob Sig 05: Corruptvolume

  Prob Sig 06: NoRootCause

  Prob GIS 07:0

  Prob GIS 08:2

  Prob Sig 09: WrpRepair

  Prob GIS 10:87

  OS version: 6.0.6001.2.1.0.256.1
  Local ID: 1003

  Used Dell pre-start checks and all physical systems seem to be software. Can anyone help?

  Thank you

  Hello Buzbyb6,

  Thanks for posting on the Microsoft answers Forum.

  I have a few questions to help you solve your problem.

  • When you try to start you get a blue screen? If so, then try to get the error code number that appears. This will give us more insight as to what might be causing your problem.
  • You can start safe mode? Press F8 boot to Vista. then select Safe Mode.

  Some of the things that might cause this problem would be a corrupt file system, bad Ram, or a defective hardware.

  • If you can access the SafeMode. Run CHKDSK to fix the file system. Go to a command prompt and type chkdsk/r
  • Check the RAM with Memtest since a bootable floppy or CD. www.memtest.org
  • Check the disk for bad sectors.
  • If it's just a damaged OS, backup your data and run recovery to restore Windows to its factory condition.

  If please post again and let us know if your problem is resolved or if you need further assistance.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A ton of static will start coming from my PC speakers without reason

  Original title: MUSIC & STATIC

  When I have no programs running a switched-on or something a lot of static begins to come through my computer. I restart and it will return ads play then backfilled and then starts over. I have a Dell INSPIRON ONE and norton 360. i BOUGHT IT Feb.2011 and I don't know what it is. I've had three people of this generation computers look and all three said that they had never seen a computer to do this and the guy from the internet a friend ran the test on this issue and could not find anything but what it do stop ito for about 4 hours and it came back. It lights up while I SLEEP.  No one knows what is the cause and how to stop it other than to remain silent? Thank you, Kathy

  Hi, Kathy,

  FYI: You have posted on the Feedback Forum.  A moderator will pass this to a proper forum.  This issue is part of hardware and drivers Forum.  Please note the drop-down menus when you click on the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware

  Have you added new hardware or device software recently?

  During this time:

  Computer to boot safe mode with networking.  Download the following tool and run a full scan to exclude the malware.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

  Reboot and let Windows load

  Using the MSCONFIG Utility - check startup programs.  Here is a list of programs that Dell.  Did you notice something different?

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=rc962226&l=en&s=SLG&docid=DSN_BDF4D6547F0B490BA5B9B97E37424170&isLegacy=true

  Disable unnecessary startup items by using the MSCONFIG tool

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=555&docid=466603&l=en&s=biz

  Run the Diagnostics, restart the computer and as soon as it starts to boot press f12. Select 'Diagnostic' in the start menu. The computer will run its evaluation tests of pre-seed for 3 or 4 minutes before the start of the Dell Diagnostics. These pre-start tests play a few beeps and tones in the speaker system, but it does not cover the rest of the audio material, always let the Dell Diagnostics running after that finished pre-start tests. Dell Diagnostics plays an instrumental piece of music complete with battery, so if you hear only certain tones then you only run the pre assessment test.

  When Dell Diagnostics opens, select "custom", then the audio test. This will test your system audio regardless of Windows and drivers, meaning that it is not serious if they are working properly or not. Alternatively using headphones and listen to the speakers in case is working alone.

  Dell Diagnostics will play some audio and ask you if you heard. If you answer 'no' then the test generates an error code means that you indicated that you did not hear the sounds she played, but it is not and can not locate the exact component that went wrong. If you do not hear the music during the test, it certainly means that there is somewhere a hardware failure in the system. In this case Dell will repair the computer if it is still under warranty.

  If you do not hear the sound, which means that the material is correct, but there is a problem with the software or configuration.

  After return from error codes/messages

  Sound Blaster X - Fi Xtreme Music PCI Soundcard - line distortion

  http://en.community.Dell.com/support-forums/desktop/f/3513/p/19269291/19467355.aspx#19467355

  Is it possible, you can pass your sound card for testing purposes?  If you are not able to 'borrow' another card in order to test, try reinstalling the sound card.

  It is relatively easy to reinstall the card. Follow the instructions in this Document from HP Support

  Installation or replacement of a sound card

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=bph07166

  Worst case scenario, you may need to replace the sound card.

• try to install Medal of Honor Airborne on 32-bit vista, and problems with the windows firewall starts do not.

  OK, im losing my mind.

  I bought a copy of airborne for my 32 bit vista system and found initially that I had to do a few tricks to install and play it like UN-installing ageia phys-x, it was simple enough. Well I have had since stopped playing it and would try to uninstall without result. I tried to fix it and using "C-cleaner.

  I went down some of the files, but I think that my registry is a little buggy so I tried blocking it with c cleaner, he sure found several errors and fixesd them.

  Well, I'm trying now to re - install MOHA and when I put the disc and click autorun the pre-start games window appears with the usual options, play, upgrade, site Web etc... I hit play, it does nothing. I tried to uninstall it from the disk and to halfway through she said "MOHA has not stopped the Installation Wizard prematurely try again later". I can't repair or uninstall or install. I read somewhere that it is a firewall with windows problem and if I run my firewall victory "which I have never on", this should work if the software is added to the 'green' list on the firewall.

  now I find that I can not get my firewall to start. I researched and found a few forums where people explained to the services command prompt and tried to 'start' several 'order' in there and firewall programs will not start giving me this error-windows cannot start service windows firewall. and the code of error-6801.

  I am a novice to tooling autour under the 'software' hood of PCs. I know a bit about the material and that's it. anyone has any ideas for me? otherwise I'm looking to another disorder vista install, I had a moment difficult, installation of the 1st hour and im not not looking forward to try it again...

  Thanks in advance, has soon - a fool lose his mind...

  Hi rocknerd,.

  You can try to download the Windows Installer Cleanup utility and try to remove the game, and then reinstall it.

  You can read the following article to download the Windows Installer Cleanup utility:

  http://support.Microsoft.com/kb/290301

  1. click on Start , then select all programs

  2. in all programs , click Windows Installer Cleanup; the Windows Installer Clean Up Utility window appears, listing the software currently installed on your computer.

  3. Select the game in the list, then click on Remove. If you have multiple files, delete all the.

  After you run the Windows Installer Cleanup utility try to re install the game and check if it works on your computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ePSA question Pre boot

  While researching a slow start upward, I ran this test pre start of ePSA series.  There are only 98% before, I left.  I did see a very brief flash of a message which says "'waiting for completion DST".  After 2 hours, I stopped the test.  Is there a problem here?

  Hi Jkorber,

  Welcome to the Dell Community.

  I understand that you tried to run the test of the ePSA on the computer. Usually the pre-seed assesment test should take about 5-10 minutes depending on the system configuration.  Because it is not clear how the test has been done, I would ask you to click on the link below. There the steps and the link with difficulty if an error code appears in the test.

  http://Dell.to/MNniAq

  Also, it is recommended that you disconnect all sources of power to the computer and then press on and press and hold power for 10 seconds and then plug the power supply to the computer until the test is conducted. This allows to release static electricity.

  Please come back if there is any other questions. Happy to help you.

  Thank you best regards &,.

  Dell_Appu_S

  Dell social media autoresponder reference

  http://www.Facebook.com/Dell

  https://Twitter.com/DellCares

• ASA Windows7 and startup-before-logon problems (SBL)

  We try in vain to get Windows7 SBL working with configuration following (SBL works for XP);

  ASA5520

  ASA 8.0 (4)

  ASDM 6.1 (5)

  AnyConnect 2.4.1012

  VPN Plus license (SSL VPN peers 100)

  When you configure the group policy for Clent download optional Module we have option for vpngina and can not see module start before logon (EPP), in paragraph 2.4 of the AnyConnect Client documentation.

  Is this a problem of license type or do we need an ASA/ASDM software update?

  Thanks in advance for your help.

  The following doc can be referenced on the rest of the SBL configuration:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00809f0d75.shtml