bot has not initialized

Similar Questions

• Agent Extension SNMP event log has not initialized properly in windows 2008 R2

  I enabled the functionality of SNMP Service and found the following error:

  "Error 2019: Extension SNMP event log Agent has not initialized properly in windows 2008 R2 Enterprise 64-bit.

  I uninstalled all related SNMP Applications and reinstalled the functionality of the SNMP Service, however, I always do face the same error.

  According to the following of Article http://support.microsoft.com/kb/128729 , this requires to contact microsoft to obtain the fix.

  I have a subscription with Microsoft technical support to download the fix mentioned the article above.

  Any help please,.

  Hello

  The question you posted would be better suited in the community pro Windows 2008.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Attempt to restore the system on Aspire E1-510-4659. Restoration has not initialized, but went to a BSoD loop.

  Tried a system restore but restore has not initialized and went into a loop. After a long delay itwent on a BSoD and looping continues by saying that he could restart the computer. There can be no. Can't stop to do a reboot.

  Hello

  You can use ALT + F10, to access Boot Options advances & you can try to refresh or Reset. Cheerse

• System Restore does not: Windows XP, getting the error "system restore has not initialized because windows stops."

  "System restore has not initialized because windows stops."

  This message keeps me from using system restore any previous date, I chose. Restore fails every time.

  Window shutsdown too early. What can I do to prevent this?

  Try to boot mode safe (the F8 key as the computer starts from the tap) and run system restore from in Safe Mode.

  HTH,
  JW

• USB flash drive has not not found on the computer

  Original title: Flash Drive operations

  They gave me a flash driver allows to display certain information, I put it in my USB Port, it lights up, but nothing appears on my screen to indicate what he. I went to the computer, but do not see

  any removable device for a flash drive option. How to open this to display information on the USB

  Hello

  1 have USB flash or external drives readers have worked on your computer?
  2. what operating system is installed on your computer?
  
  Method 1:
  You try to run the Fixit.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  If you are using Windows 7, you can follow the methods mentioned below.
  Method 2:
  Run the troubleshooter of material and check what is happening.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   
  Method 3:
  You can check under diskmgmt.msc, whether or not the USB received a drive letter. If not, then try to assign one and check. Follow the steps.
  (a) open computer management by clicking the Start button, clickControl Panel, clicking system and security, clickingAdministrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in the left pane, click disk management.

  (c) if the flash drive recognized in disk management and if there is no drive letter assigned, I suggest that you do a right click on the drive and assign a drive letter.

  (d) click the drive to change and then click change drive letter and paths.

  Do one of the following for the assisgn drive letter.

  • For letter an if it has not already received, clickAdd, click the letter you want to use and then click OK.
  • To change a drive letter, click change, clickassign the following drive letter, click the letter you want to use, and then clickOK.
  • To remove a drive letter, click Remove, and then clickYes to confirm that you want to remove.

  Check this link for more information:

  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  Method 4:
  You can also check in the Manager of device if the device is in the list.
  a. connect the device to the computer.
  b. to open Device Manager, type devmgmt.msc in the start search box and hitEnter.
  c. check if the device drive is listed.
  d. in Device Manager, expand the device listed in the device list.
  e. If the device is listed, right click on it > click Properties.
  f. in general, look under device status for the message. After back if there is no error message.
  See also:
  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device
  
  Method 5:
  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.
  
  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:
  (a) click Start and then click Control Panel.
  (b) click System and Maintenance, click System, and then click Device Manager.
  Note: If the control panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.
  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.
  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.
  If you are still having the same problem then you can check the device USB drivers updated using windows update. See the following link for assistance.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  If the edge of the question persists I'll ask allows you to check the chipset driver updates you find on the manufacturer's website. The chipset drivers normally integrate USB controller drivers as well.

  I hope this helps.

• DirectX end-user Runtime Web Installer not initialized or something

  I tried to download DirectX for a lot of times now, and it does not work! I have a life as YouTube, so I have to make a new video on my next game! But then I have to download DirectX, and as I said, it does not work! Here is the log that I got:

  11/03/14 20:59:20: DXWSetup: * DXWSETUP *.
  11/03/14 20:59:20: DXWSetup: WinMain()
  11/03/14 20:59:20: DXWSetup: IsIA64(): not IA64.
  11/03/14 20:59:21: DXWSetup: target file: "C:\Windows\system32\directx\websetup\dsetup.dll".
  Version 4.9.0.904 of the target file is
  The source file is Version 4.9.0.904
  11/03/14 20:59:21: DXWSetup: target file: "C:\Windows\system32\directx\websetup\dsetup32.dll".
  Version 4.9.0.904 of the target file is
  The source file is Version 4.9.0.904
  11/03/14 20:59:21: DXWSetup: GetDXVersion(): could not get the RC of the registry string.
  11/03/14 20:59:21: DXWSetup: DirectX Version: 4.09.00.0904.00
  11/03/14 20:59:21: DXWSetup: Setup Version: 4.09.00.0904.00
  11/03/14 20:59:21: DXWSetup: a newer version of DirectX has already been installed.
  11/03/14 20:59:26: DXWSetup: CDXWSetup::CDXWSetup()
  11/03/14 20:59:26: DXWSetup: CDXWSetup::DownloadDXUpdate()
  11/03/14 20:59:26: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 1, subreport = 0 x 0
  11/03/14 20:59:26: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
  11/03/14 20:59:26: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 2, SubStatus = 0 x 0
  11/03/14 20:59:26: DXWSetup: OnStartInstall(): DLSize = 81, InstallSize = 0
  11/03/14 20:59:26: DXWSetup: OnStartComponent(): ID = DXUpdate, DLSize = 81, InstallSize = 0, str = % DirectX_Setup %
  11/03/14 20:59:26: DXWSetup: OnComponentProgress(): Phase = 0, = 0 progress
  11/03/14 20:59:27: DXWSetup: OnStopComponent(): ID = DXUpdate, hr = 0 x 0, Phase = 9, str = % DirectX_Setup %, State = 0x0
  11/03/14 20:59:27: DXWSetup: OnStopInstall(): hr = 0 x 0, str = (null), State = 0 x 0
  11/03/14 20:59:27: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
  11/03/14 20:59:27: DXWSetup: WM_APP_DOWNLOADDXUPDATE
  11/03/14 20:59:27: DXWSetup: CDXWSetup::InitInstallEngine()
  11/03/14 20:59:27: DXWSetup: CDXWSetup::InitInstallEngine(): Sections are not initialized.
  11/03/14 20:59:27: DXWSetup: PreinstDlgProc(): CDXWSetup::InitInstallEngine() failed.
  11/03/14 20:59:27: DXWSetup: WM_APP_ENDDOWNLOAD
  11/03/14 20:59:29: DXWSetup: CDXWSetup::~CDXWSetup()
  11/03/14 20:59:31: DXWSetup: CreatePropertySheet() returns-9.
  11/03/14 20:59:31: DXWSetup: C:\Windows\system32\directx\websetup\dsetup.dll files deleted.
  11/03/14 20:59:31: DXWSetup: C:\Windows\system32\directx\websetup\dsetup32.dll files deleted.

  I am using Windows 7 32 bit and I can not get my game running until DirectX is installed. Help, please!

  Hey Tyler,

  You can consult the following Microsoft article if you are facing problems with DirectX and check if that helps.

  Diagnosing basic problems with DirectX

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX

  You can also read the following article from Microsoft to download the latest version of DirectX.

  http://support.microsoft.com/kb/179113/en-us to install the latest version of DirectX

  http://support.Microsoft.com/kb/179113/en-us

  I hope this helps.
  Please post back with the State of the question and we will be happy to help you further.

• vSphere 5.5: "the storage service is not initialized.

  Hello

  When I go to the views of storage for any object (vm or cluster or host...), I have this popup "the storage service is not initialized. And windows is empty...

  I am 5.5 (1891313). When I go to the State of the Service, the VMware vCenter vCenter, monitoring of Storage Service is on alert warning and show 'Service initializing... '. »

  I try a lot of KB VMware, but nothing works to solve my problem. I can't find any KB explaining MY problem. The sms.log is not updated since the beginning of the problem and the sps.log show an error to the VMware vSphere Profile-Driven Storage Service service starts:

  2014-07-29 13:15:39, 281 [WrapperSimpleAppMain] INFO opId = com.vmware.sps.util.impl.SpsQsConnectorImpl - connected to the query Service

  2014-07-29 13:15:39, 281 [WrapperSimpleAppMain] INFO = com.vmware.sps.SpsLocalService - SPS opId subscribing to the query Service

  2014-07-29 13:15:39, 281 [WrapperSimpleAppMain] DEBUG opId = com.vmware.sps.qs.SpsQsProvider - registerSpsProvider

  2014-07-29 13:15:39, 284 [WrapperSimpleAppMain] WARN opId = com.vmware.vim.vmomi.client.http.impl.HttpProtocolBindingImpl - run asynchronously requested but no executor configured. The request will be executed as a synchronous.

  2014-07-29 13:15:39, 293 opId [WrapperSimpleAppMain] DEBUG = com.vmware.vim.storage.common.util.UUIDFactory - server GUID in the config file - a056401d-1138-4509-931d-5d81fdaeda36

  2014-07-29 13:15:39, 293 [WrapperSimpleAppMain] opId = com.vmware.sps.qs.SpsQsProvider - SPS INFO has already been registered in QS by uuid: a056401d-1138-4509-931 d-5d81fdaeda36

  2014-07-29 13:15:39, 293 [WrapperSimpleAppMain] opId = com.vmware.sps.qs.SpsQsProvider ERROR - cannot save the SPS in QS:com.vmware.vim.binding.dataservice.fault.AlreadyExistsFault:

  inherited from com.vmware.vim.binding.dataservice.fault.AlreadyExistsFault

  2014-07-29 13:15:39, 293 [WrapperSimpleAppMain] INFO = com.vmware.sps.qs.SpsQsProvider - SPS opId was saved in the query with the GUID of the provider service: a056401d-1138-4509-931d-5d81fdaeda36

  2014-07-29 13:15:39, 314 [WrapperSimpleAppMain] INFO opId = org.dozer.config.GlobalSettings - trying to find the bulldozer configuration file: dozer.properties

  2014-07-29 13:15:39, 315 [WrapperSimpleAppMain] INFO opId = org.dozer.config.GlobalSettings - bulldozer configuration file not found: dozer.properties.  Using default values for all of the global properties of bulldozer.

  I solved the problem with VMware technical service.

  I have 2 Wrapper files in "C:\Program Files\VMware\Infrastructure\Profile-Driven" of storage. Wrapper and Wrapper1.

  There is a problem because some files must be in both folders. To solve the problem and use a single Wrapper file as a clean install, just uninstall VMware Vcenter Server, delete the folder "C:\Program Files\VMware\Infrastructure\Profile - Driven Storage" and reinstall. Change the connection of service "VMware vSphere based storage Service profile" to set the same service "VMware VirtualCenter Server. You must have initialized service and directory of a wrapper.

• atg.workflow.WorkflowException: the internal project has not been created.

  Hello
  
  I am trying to import data into the publication server using startSQLRepository, but it throws error when I execute the script below below.
  
  startSQLRepository m DCS. Versioned - repository/atg/registry/ContentRepositories/MediaRepository - import/C:\keystore\MediaRepository.xml-projet RajeevTest-user admin-comments on mediaexport
  
  
  Caused by: atg.workflow.WorkflowException: the internal project has not been created. Check that your project workflow has been initialized by the workflow engine
  at atg.epub.project.ProcessHomeMethods.initializeProcess(ProcessHomeMethods.java:410)
  at atg.epub.project.ProcessHomeMethods.initializeProcessWithGlobalWorkflow(ProcessHomeMethods.java:343)
  at atg.epub.project._ProcessHome_Impl.initializeProcessWithGlobalWorkflow(_ProcessHome_Impl.java:53)
  at atg.epub.project._ProcessHome_ReposImpl.initializeProcessWithGlobalWorkflow(_ProcessHome_ReposImpl.java:3)
  at atg.epub.project.ProcessHomeMethods.createProcessForImport(ProcessHomeMethods.java:172)
  at atg.epub.project._ProcessHome_Impl.createProcessForImport(_ProcessHome_Impl.java:25)
  at atg.epub.project._ProcessHome_ReposImpl.createProcessForImport(_ProcessHome_ReposImpl.java:3)
  ... 8 more
  
  Help, please.
  
  Thank you
  Rajeev

  I already had this problem, I solved with Oracle Metalink [1038072.1 ID]
  https://support.Oracle.com/CSP/main/article?cmd=show&type=not&ID=1038072.1

  Published by: Girard March 16, 2012 08:57

• MY ipad has not automatically closing after update to ios 10

  MY ipad has not automatically closing after update to ios 10

  Take a look at suggestions from this thread. iOS 10 Auto-Lock does not.

• After the installation of Sierra, websites follow me like crazy!  This has not happened before.  Why this is happening and what can I do to stop it?

  After the installation of Sierra, Web sites started to follow me like crazy!  This has not happened before.  Why this is happening and what can I do to stop it?

  What are your privacy settings in Safari preferences.

  

• Just bought an album & download, a track that has been 'Album' only has not downloaded, but it has been purchased?

  Just bought an album & download, a track that has been 'Album' only has not downloaded, but it was purchased?

  Ive tried everything I can think off, but cannot get loaded. Tried all the usual verification, for available downloads etc. both my Mac and iphone but its does not work.

  When I view the album on Itunes, her show songs that downloaded, except this last song, which only says: 'bought', but no option to download.

  So, ive got 7/8 of an album! which is a rip off and very frustrating?

  Anyone have any ideas?

  Steve

  You and I can have a similar problem. Has been the "Skeleton Tree" album by Nick Cave and the Bad Seeds?

  I am facing the same issue. I can get the song 'Album Only' to appear in my music library by clicking on the album and then clicking on "See the complete Album." However, I still cannot sync with my iPod/iPhone, and unless I click on "Show full Album", I can't do my music library to interact with it at all (that is, if I play the full album, it ignores the song 'Album Only'). And even if I do this, I can't move it to a playlist or something like that.

  I would really like to have an answer to that as well.

• Cannot install OS: "this identifier Apple has not yet been used.

  I just got my first Mac yesterday, a mid 2010 Macbook of opportunity. It's in great shape, works great, I was briefly very satisfied with my purchase. Then I tried to reformat/reinstall, as it does whenever purchasing a computer used.

  I followed the instructions here: https://support.apple.com/en-us/HT204904 and when I got to the step three, after the failure of the hard drive, it wouldn't let me install the operating system. He wanted to connect first with my Apple ID, so I did an Apple ID, but now it keeps giving me an error "this identifier Apple has not yet been used in the App store" and then it gives me the opportunity to cancel or "review". Click Cancel simply cancels the installation, just by clicking on review also cancels the installation.

  An ID is not necessary, but there is no way I can see to avoid it say the instructions on this page. It was suggested that maybe I could avoid the connection on the way to recovery, rather than recovery of the Internet, but the Cmd + R and Cmd + Option + R give recovery of the Internet. I don't see any way to get to the regular recovery.

  I had a suggestion to install from the disc, but I have not all discs. If I could download it from somewhere and burn them then that would be nice, but the instructions on this page are pretty clearly that it should not be necessary to use disks. I should be able to do without signing in.

  So... what upward with who? Where should I go from here? Is it possible to do a regular recovery? Or bypass the Apple ID thing?

  < published by host >

  "a mid 2010 Macbook opportunity."

  "Cannot install OS:" this identifier Apple has not yet been used.

  It's the property > change owner of a Mac of opportunity

• This identifier apple has not yet been used with the App store.

  I bought my macbook pro to my brother and always used without my Apple ID and then I decided to restore the macbook to the factory because of some problems with the performance setting, when I hit install OS X Yosemite on the disk, it asks you to login Apple ID and when I try to login with my account , he says "this identifier Apple has not yet been used with the App store" Please check your account information, when I hit "see" nothing happens and it of kind of stuck and makes me restart the process and enter my apple ID and password. "

  I don't know what the problem is and now I can't open my macbook to use

  Because the computer has been configured using Apple ID of your brother, it is bound to this ID. If you have never downloaded Yosemite, you can not install it. Ask your brother to insert his Apple ID, so you can get the computer operational again. Then, go to the App Store, sign in with your ID and check the purchases tab to see if the Yosemite is an option. If this is not the case, download El Capitan and see if it will install. If you want to do a clean install, quit the installer and the program below allows you to create a bootable USB key. Boot from it, wipe the hard drive and then install El Capitan. When you restart normally it will be your computer. See also the link for sale.

  Bootable USB Flash Drive-Diskmaker X

  Sale of old Mac (4)          Apple support

• Firefox hangs at startup: update / reinstall / profile wipe / purge addon has not set

  Hello

  As the subject says, my Firefox crashes now immediately at startup. (It's on Windows 10 64-bit.) Here is what I tried which did not fix the crash:
  -Refresh
  -Reinstall
  -Disable all addons
  -uninstall the software which provides plugins (Flash, Acrobat Reader)
  -delete the profile

  Here are the situations where Firefox goes not down:
  -safe mode
  -use every night instead of 40.0.3.

  This is one of the first reports of the crash from today (before I tried a ton of things):
  https://crash-stats.Mozilla.com/report/index/BP-50b4ac99-cc1f-4157-93cd-5ad192150920

  And here is one of the latter:
  https://crash-stats.Mozilla.com/report/index/BP-caf2ff15-3d5a-45ff-bc00-cd58b2150920

  Any help would be greatly appreciated. Thank you!

  Given that could start Firefox in Mode safe, you try to disable Firefox to use hardware acceleration?

  "3-bar" menu button (or tools) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  This takes effect the next time you exit Firefox and start it again. Any difference?

  Normally, I give the following advice, but for Windows 10 users, the problem can actually be that Firefox has not caught with driver to the latest updates. Your experience with nightly suggest that this is the case with your hardware. (But I'll list anyway...)

  Because hardware acceleration improves the appearance of fonts and animations, you can check the website of your computer manufacturer to see if the graphics card/chipset driver updates are available for your system. This article suggests ways sure to check: update your drivers graphics to use hardware acceleration and WebGL.

• I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store

  I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store

  What exactly is the problem? You are also being invited to review the account and enter payment details? If you did you are your details accepted - if they are, you should be able to remove them then.