box endless loop

Similar Questions

• My ipod said zero KB available and used zero KB. It does not synchronize without going into an endless loop.

  IPod Classic 160 GB to 2009.  Will be out of sync without going into an endless loop.  Settings on Ipod suggest zero KB used and zero KB available.  No music is on IPOD even though I had over 5000 songs on it.

  1. is this a hard drive failure?

  2. If I I I fixit?

  3. it cannot be replaced as Mr. Cook wants me to buy more new Apple toys which will be break and not be supported.  Best advice?  (BTW, the sarcasm is due to a Imac turns is not on and engineering said: I had to buy a new computer my Imac was too old and is no longer supported.)  Tired of this song.  ((  )

  1. very likely given the age

  2. not worth your time

  I had an original iPod classic that lasted nine years, but eventually had to replace it. No material lasts forever.

• Try to download puts me in an endless loop of web pages

  Firefox does not start. I'm trying to download the latest version and your site is one-endless loop that will never actually let me download the program. I keep getting shunted 'Add' and 'register for this' pages web, but no download is available. When I click on anything that pretends to offer the possibility to download it takes back me at the beginning.

  Try to download Firefox from this page.
  
  http://www.Mozilla.com/en-us/Firefox/all.html

  Select the desired language and operating system.

• Satellite L500-1DT: HDD Recovery of Win 7 is stuck in an endless loop

  It's a so detailed bug report please bear with me.
  If you can help, or can confirm that you have had the same thing happen to you, I will be grateful.

  I've owned several Toshiba laptops before and I've even worked for Toshiba so worry, I like the machine. But I have a problem with his recovery software. I just bought a laptop Satellite L500-1DT with Windows 7 64 bit, on behalf of a non-techie who lives elsewhere. Since I know from experience that I have to sometimes panic calls from field in the sense of "it became too slow", "How do I get rid of the accumulated junk", "maybe he had a virus" and so on, the first thing I checked was ASR, which is how to bring the HD to "like new" condition.

  So I started out in the machine, replied to the questions until I got in the appropriate operating system, then led the program "make a recovery DVD. Double layer DVD checked ok. With the freshly made DVDs, I swapped the HD for a spare part, I had (much less: only 40 GB instead of 320) and started the rescue DVD hoping it would fix my own system to the blank disc.

  He did repartition the drive according to its schema, with more or less half the space for Windows and the other half for the data, including the recovery files. He did install the system in the Windows partition. It was then restarted in Windows 7 installed in order to complete the installation. There, the trouble began: an endless loop of reboots for hours until what I stopped it.

  Loop:
  * reset
  * black screen with bright logo 4 color windows «windows startup»
  * black screen with slight blade and "Setup prepares your computer for first use.
  * blue white screen "Welcome" with "please wait" and the crossbar with green blob, saying "the installation may take several minutes. Please do not interrupt or shut down the computer! »
  * blue screen saying it stops

  Repeat the above forever.

  I saw him restart way more than 10 times over several hours. And whenever he's faking, that this is the first time she did it. Of course, this is not normal!

  I tried to stop with ctrl-alt-del and the Task Manager, but the white screen would go even the Task Manager, making it difficult to kill any process or even inspect what they were on top. I stopped it by holding down the power button until it shuts. Then when it restarts it said that if I wanted safe mode. I tried. He went into the routine above and at one point he says that he could not proceed with the installation, if it was in safe mode. So he restarted in normal mode and then...! It is finally out of the endless loop!

  Then he asked me all the usual language, record etc., questions as he did the first time I had turned on him. This seemed good. Finally, I walked into a newly installed operating system and everything seemed fine, except that I found out later that some programs that were there before were not installed.
  With bravery bordering stupidity (*) I even Redid the procedure hard disk provided instead of my rescue: first I have nuked the windows partition, then I save the HD (with F8), not with the DVD that I had done. Result: similar rigmarole, with endless reboot.

  After that I stopped it, it kind-of-worked, as above, but now some programs were lacking, such as the Toshiba DVD drive.

  (*) motivated by: better try now with the computer here and all my tools and other computers ready at hand, that when the computer died at home of its owner, and that's the only thing left to try with me at the other end of a line call. Been there before.

  Now, that specific (DVD player), that I could download it from the support page and it installed fine. But what else might be missing or not working not that I have not noticed? The restore process is clearly not working as it should.

  I'm the first or only to whom it happens? I'm doing something wrong? Is there anything else I should try?

  I need to make sure that the restore procedure works perfectly while I still have the computer in my hands. If not, there is no chance that I'll be able to do a remote reinstall for my non-techie, once I asks me to clean the laptop by phone a few months from now.

  Thanks in advance

  [Update: just looking for the right place where I could post what I found that other people report the same problem.] This is definitely a bug in the software distributed for W7 - 64 overlay, not a problem isolated to my machine. See for example
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49421&TSTART=0 where the user kwarc described the same symptoms with a Satellite L505.

  Hello

  First of all, I must say that I could recover my trouble free unit.
  The installation of Win 7 went well and everything has been installed correctly.

  Back to you:
  To me it looks like something wrong with installation maybe some HARD drive partitions were confues perhaps, HARD drive should again formatted, and then run the recovery procedure.
  You should test

  Regarding the DVD player:
  As much as I know there is no DVD player for Win 7 64 bit. There are only available for Win 64 bit updated. If you need to install the DVD player for Win 7 32 bit version and then update using the patch released for Win7 64 bit.

• LaserJet M1212nf MFP: How can I download a driver for Laserjet. The site seems to be an endless loop

  I try to use my Laserjet M1212nf MFP as a scanner.  I'm trying to download the driver so that I can do.  Currently, I can only print and copy.  When I use the hp Web site, it asks for my product, and then when I select it I'm directed to a picture of him and it is said below download drivers that takes me back to find my product.  How do the driver?  How can I use my Laserjet as a scanner?

  I found the HP folder and was able to scan.  It has not put an icon on my desktop as did my previous installations.

  When I talked to support the HP told me they had technical difficulties with the Web site.  They site immerses you in an endless loop.  If you need support you can call them direct to the 1-800-474-6836.

• KB980182 causing an endless loop

  I installed the KB980182 update a few weeks ago. After doing so my computer is starting in an endless loop, restart after step «Setting up your computer for windows» Last known good configuration, safe mode, etc., all have no effect. I tried to return the actions pending with dism, which seems to fill sucusfully, but had no effect on my problem. Someone at - it ideas?

  No, it's not my problem.

  As I said, it is not a case of a virus or malware. I understand that you probably experience a lot of people who claim to be knowledgeable in what they do and therefore don't use protection programmes and eventually damage their system, but this isn't the problem here. I work as a security researcher and I know if my system is infected or not. It is not the case.

  If you can't trust me on this, so please do not offer your support more far.

  I'm marking this post as the answer in the hope of closing the thread that I cannot delete it and hope to find an answer to my actual question.

  Thank you

• Configuration updates: stage 3 of 3 100% full, stuck in an endless loop

  I was installing the updates of windows and stuck in an endless loop in step 3 of 3-100% full. Do not turn off your computer. I tried a solution described in many forums like: press F8 and select Safe Mode and remove pending.xml but I always end upward with Configuration step 3 of 3 before I can still do something. I tried all kinds of Mode without failure and the Directory Services Restore Mode. Nothing works I don't know what else to do.
  Thanks for help
  Is the best
  Konrad

  Hello

  1. could you give us the exact error message?

  I suggest you to try the steps below and check if it helps.

  Method 1: Resolve stop (blue screen) error in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  (For Windows vista)

  For your reference: If you are not able to boot normally to the desktop, follow the steps in this link:

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7.

  http://support.Microsoft.com/kb/949358

  More information: Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• Office Jet Pro 8500 in endless loop warm-up.

  I have a HP Office Jet Pro 8500 running on a network on Windows 7. Recently, my printer seems to go into an endless loop. When I turn it on, it says "warming up". He feeds then for a few seconds and then returns to heat". The printer then repeats this cycle without end I'd appreciate any help.

  The print head is until warranty, but I stil problems. I decided to buy a new printer with a WARRANTY EXTENSION. Thanks a lot for your help.

• Endless loop

  Program being updated to Windows 7 it goes into an endless loop

  Please click on he answer on my post.  Who will help others looking for answers.

• HP Photosmart C6180: installation endless loop

  Hi, I saw that many people had a similar problem but I have found no solution.

  On a desktop pc Windows XP32 I had to reinstall a network HP 6180 printer.

  The original software/driver CD go into an endless loop; first ask to see internet to update, after some time, reboot and after reboot start early request check the update, restart... and so on...

  I tried to uninstall all software and reinstall but still the same.

  I tried to follow the instructions to clean all the drivers using 'l... '. Something.bat"and download full driver/software (more than 500 MB) but the result is always the same, loop without end.

  I tried manually adding a printer and select "driver disk"... the printer works now, but it's not possible install the software and the device scanner is also absent.

  Any suggestion on how to break out of this loop?

  Thank you

  Marco

  Hello Marco, alias @mfive ,.

  Welcome to the HP Forums

  I read your post about the problem that you experience when you try to you Photosmart C6180 install on your Windows XP system, and answer to you my suggestion for you!

  I hope that helps!

  Check out this guide, it contains some great to try to get the installation completes successfully. Try the steps in order:

  Windows XP: On the Software Installation progress bar stops or crashes

  Good luck do not hesitate to let me know the results!

• When I check the updates, it goes into endless loop and never off.

  Original title: windows updates

  When I check the updates, it goes into endless loop and never off. Even if there is no new update, he said usaly. What is gpoing?

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

• Endless loop of connection

  • I have a valid subscription to Adobe CC.

  • I use a Mac computer.

  • No firewall and very fast internet connection.

  When I try to run any program Adobe CC the "sign in" appears, I support on connect and then appears the window of "Thank you", and the program starts only to fall again in the 'Sign' in windows, in an endless loop or "Sign in" = > 'Thank You' for windows

  I erased the "OOBE" folder, restart the Mac on safe mode and empty the trash

  The MBLStore file does not exist in my Mac, or at least it is not in the >(User Name) > library > Application Support > Adobe folder.

  Spotlight finds him or the other.

  I have also uninstall and reinstall the suite Adobe CC complete several times and the loop continue to occur every time

  It's extremely frustrating, especially when the subscription fees monthly kick in and I don't have a program to use.

  Help, please

  Thank you

  See the link below:

  Sign in question required

• Wireless printer is configured, but the Setup program install HP is in an endless loop

  Wireless printer is configured (HP Officejet 4500), but the Installer HP Installer is in an endless loop.  It says "Fatal error during installation." and keep trying to uninstall/reinstall/etc etc.  Printer is set up and works fine, just get rid of this crazy loop - no guidance?

  Dee

  What operating system is installed?

  I recommend that you uninstall the software printer of the folder in the start menu-->--> HP--> HP software uninstalling programs

  After the uninstall is complete and your rebooted system install and set up the printer again.

• Renew subscription endless loop... help please!

  Hello

  Please, urgent assistance is required. I was brought to my knees and cannot do the job with a serious deadline fast approaching.

  I can't use ANY CC apps on one of the 2 10 Windows PC that I use!

  I get just an endless loop of 'Renew your membership', "Sign in required" and "Thank you" messages even if my subscription is valid until November 22.

  I tried...

  -Signature of designer Cloud Desktop app

  -By disabling the two PCs

  -Restart

  -Remove the OOBE folder

  -Delete the folder AAMUpdater

  -Uninstall creative cloud desktop application

  -Completely uninstall CC, using the creative cloud cleaning tool and reinstall applications and CC

  -AAM update

  Nothing worked... Please help?

  The only suggestion that I have seen that I have not tried is the following of 'Renew your membership' error window bug!

  10 re: bug in window error 'Renew your membership'!

  Lynch.Scott 16 December 2015 15:25 (in reply to mikiturgeman)

  I finally got a solution from Adobe! It is a update my post of Sept, 22nd 2015 is above.

  After 6-7 technical support calls and 4-5 hours of my time, finally the question was found to be on the Adobe authentication server. So after three months of my membership doesn't work do not, the solution that worked was to cancel my old subscription, I had this phone with the software Adobe Department of accounts and then just restore a new subscription.

  -----

  Has anyone got another solution or found the above to work?

  Thanks in advance for your help.

  Hi PotomacMR,

  Please Contact Customer Care for assistance and information.

• How do I leave my membership? I am sent on an endless loop, trying to stop my membrrship. Help!

  I am sent on an endless loop trying to stop my subscription and or talk to customer support to stop my subscription. I do not use it. I don't want to.

  We are working on this, but there is no ETA for it right now.

  Concerning

  Stéphane