No bluetooth after SP2

Similar Questions

• Tecra S1 problems after SP2 installation

  I have a problem when I use SP2 on my Tecra S1. After you install SP2, my pc crashes when I use the function 'stand by' or 'Hibernate '. It comes with a conflict of interrupt on irq 11 and begins to restart again. Whenever the pc starts again, the blue screen appears with the problem to irq 11 and the program that does, it apears at the bottom of the blue screen, should be "gv3.sys. I did al updates on ' information to update the driver for Windows XP with Service Pack 2 - v1.1.pdf ", but without success. The pdf file say I need to update the driver power saver to version 1.00.34M version, but I can't find it on the site. I use the Dutch version of WXP and the only driver I can find on the Web site is the 1.00.32M version and the English version is the 1.00.34M, so maybe that's the problem. I tried with a clean version directly from the restore CD but I came up with the same results.

  Who can help me to fix this, or point me in the right direction.

  Hello
  you are absolutely right! The 1.00.32M version is the most recent for your machine (for the Netherlands).

  Do not irritate cause there is a version higher than for other countries. The functions are equal.

  Try again with this version and keep us updated, please!

  Good bye

• problem after sp2

  Dear Sir.
  After that the installation of SP2 on new tecra M2 745, when I want to shutdown computer first message 'nVidia double window display' can not finish so I have to give the command to put an end to this program; How to fix this?
  Thanks in advance
  PS: reinstalled the drivers pleasantly after sp 2
  Dr. Weekx

  Hello

  You can try if you can disable the nvidia driver Dualview feature. Go to start - Control Panel - Display - Properties - Nviida

  There must be a function called Twinview or dualview.

  Turn it off, it should solve the problem.

  Tanya Bye

• Satellite Z930 - no more Bluetooth after upgrade to 8.1 Windows

  Hello

  After upgrade to Windows 8.1 of the Windows store, I discovered that my Bluetooth printer
  has disappeared. Looking at the wireless settings, no more option to turn on/off Bluetooth.
  How can I return my Bluetooth?

  If you updated the system of Windows 8 Windows 8.1 you must update the drivers too!

  You will find on the page of the Toshiba UE Windows Update 8.1 driver drivers
  There is also a statement of installation containing the installation order.

  1 Intel Wireless display uninstall
  2 uninstall Intel Proset
  3 Realtek Audio Driver uninstall
  Day 4 windows 8.1
  5 TOSHIBA Assist Desktop Upgrade
  6 Intel Display Driver upgrade
  AMD 7 Display Driver upgrade
  8 Intel Rapid Storage Technology driver upgrade
  Update driver Audio Realtek 9
  Update 10 ALPS Pointing Device Driver
  Upgrade of 11 Synaptics Touch Pad Driver
  12 Atheros Wireless LAN Driver upgrade
  13 Intel PROSet/Wireless WiMAX software update
  14 Ericsson 3 G driver upgrade
  TOSHIBA 15 system upgrade driver
  Upgrade of 16 TOSHIBA Service Station
  TOSHIBA 17 function key upgrade
  18 TOSHIBA eco Utility v2 upgrade
  19 TOSHIBA Fingerprint Utility upgrade
  TFPU 20 WBF deleting fingerprints tool upgrade
  21 TOSHIBA PC Health Monitor Upgrade
  22 TOSHIBA VIDEO PLAYER Upgrade
  23 CyberLink MediaShow 6 to upgrade TOSHIBA
  24 TOSHIBA Media Player by TrueLink + Upgrade sMedio
  25 TOSHIBA resolution + plug-in for Windows Media Player upgrade
  26 TOSHIBA HDD Protection upgrade

• Crash after SP2

  Dear Sir.
  just install SP 2 on my tecra M2 745, but just before the arrival (on the "clean") installation stopped and I couldn't stop, things resembled a crash
  After the reboot, looked like to SP2 has been installed correctly but then again, and yet once, a message came that the program 'window dual nvidia display' could not end so every time I got to the end that manually
  How to fix?
  And is it normal that windows keeps downloading updates all the time (internet is open all the time)?
  Thanks in advance
  Dr. weekx

  Hello

  Yes, it is normal that Windows downloaded updates frequently.
  When you see this message? At the beginning, or when you want to stop the laptop?

• Trouble quitting after SP2 XP Reinstall

  Reinstalled SP2 the week last in the forlorn hope of solving a problem of CD/DVD drive. Since then, whenever I have shutdown, it passes through the movements and then falls (flashing some kind of error message in the BACK) and automatically restarts. The only way I can turn off is to press the power button.

  All solutions?

  Rgds/Phil

  Hello

  The best way to solve it is to recover the system.
  I think it's a windows problem and difficult to recognize.
  Backup your important data and insert the Toshiba Recovery CD!
  After that, it should work without problem!
  Good bye

  Sammy

• Tecra 8200: After SP2 computer laptop installation keeps rebooting

  Hello.

  I am running Windows XP Pro in my Tecra 8200 and decided to install SP2 (oh error) now, whenever I turn it on I go as far as a blue screen with the following message
  STOP: c0000135 {Unable to locate component}
  This application has failed to start because winsrv was not found. Reinstalling the application may fix this problem.

  After my laptop keeps restarting - boots - blue screen again. I have tried everything to connect to windows to uninstall SP2, but I can not connect.
  I tried to change the boot sequence (some ppl said that it was starting in LAN), I disabled the CPU Cache and L2 in the BIOS and still nothing. If I turn off reset on the failure of the system (as some other guy suggested) I just can't not anywhere either.

  Unfortunately, I do not have the boot floppies so I can not format the laptop.

  Now I know why that is happening, but the answers I get is to uninstall SP2, update the Bios, or to download patches, but I can't make one any of them because I can't get into windows, even in safe mode.

  Someone at - it ideas?

  Hi Hector.

  If you cannot start in safe mode, and then unfortunately mode your only real option is to reinstall your operating system to the original recovery disks.

  I think something went wrong during the installation of SP2 and this has led to the corruption of one or more of your system files.

  I also recommend that you take a full backup of your system before attempting to do a re-installation of SP2 so that you do not have to depend on start-up in Windows to regulate if necessary.

  Personally I take a picture full backup to an external hard drive using Norton Ghost before applying any big maintenance work on my own laptop.

  HTH

• Satellite A300 - easy (key) does not not after SP2 update

  Satellite A300 easy (key) does not...
  I have recently upgraded my Vista SP1 to SP2 (do not know if this is the problem, but I'm pretty sure that's not)

  Yesterday, I discovered that my easy keys no longer work. Lights are out, when I press the keys, the light comes on and goes off again as they do normally, but no reaction on my screen (can not turn on any light without restarting my computer and select turned ON manually cannot transform media of windows opened by the touch and play the key do not work).

  Is it supposed to be a driver or something for this?

  Sorry for the bad English...

  Hello!

  A few days ago, I had the same problem on my laptop Qosmio. Lighting keys stopped working after installing some updates and the 3rd application programs the keys no longer works and also the lighting.
  At the end of the story, I had to reinstall Windows :(

  In any case, now, you should try to reinstall the Toshiba value added Package. He controls these buttons that you want to say and you can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before installing you need to remove the old version first, restart the computer, clean up your Windows with CCleaner for example, restart again and then install the new VAP.

  Good bye

• Mac Pro 4.1 - No. USB or bluetooth after El Capitan 10.11.3 updated

  I have an early 2009 Mac Pro 4.1 (2 x 2.93 GHz, 16 GB ram, 5870 1 GB GPU).  After the upgrade to 10.11.3, the bluetooth is indicating is not available and not picked upward by looking at system information.

  In addition, the USB ports do not work.  They will power the led lights on an external USB switch, but the keyboard and the wired mouse will not work (red under the mouse does not appear).  I tried the front and rear USB ports and none works.

  I can't get USB working on card PCI-E card USB3 I installed.  And this ONLY works if I start the computer and after loading in OSX, THEN connect the keyboard and mouse in.  If I have the keyboard and mouse connected at startup, it does not on the PCI-E USB port.

  I tried to turn off, turn the power to the cord, out of RAM and resetting, out all readers and back, leaving the computer and unplugged for an hour, then restart.  This does not solve the problem.

  I booted the Mac using OS x 10.9 Mavericks and everything works fine, the bluetooth functions properly and all the USB ports work fine.

  So I have the feeling that this is a problem with the 10.11.3 patch.  The system was fine in 10.11.2.

  Could someone please suggest how I can troubleshoot and resolve this problem so that I can use several USB ports and reconnect the bluetooth devices.

  Thank you!

  -Try resetting the memory NVRAM/PRAM and SMC. It seems that already reset you the SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

  I have MP 2009 with 10.11.3 and have no problem

• Satellite T110 - Defective Bluetooth after waking from sleep

  SATELLITE T110 Bluetooth will fail after awakening from sleep.
  The icon will be flick between white and green as he seeks my device (phone).

  I ve reduced the problem to the laptop, because if I try to pair again phone to the laptop it fails. It's almost like he has a block?

  Operate as planned, then I have to charge fully.
  Bluetooth connects then as planned.

  It only became a problem because I installed the latest BIOS v 2.40
  I use the 64-bit Version.

  When the problem occurs I run the Bluetooth Diagnostics and it comes back as fine no error reported. It s a pain now because I use the laptop mode "sleep" more off.

  This is due to the new update of the bios.

  Can you after waking from sleep just restart BT stack and try to connect to the mobile phone?
  You mean that with the old version of the BIOS, everything was OK?

  Last question: what was the reason for the update of the BIOS? I hope not the fact you want to have the latest version.

• Satellite P100-286: cannot use Bluetooth after installing XP

  I have a portable P100-286 Satellite with bluetooth. It used to work OK but since I re-installed Windows XP SP2 I can't use bluetooth.
  There is nothing in the control panel and nothing in the hardware Manager that mentions the bluetooth.

  I installed al the latest drivers and BIOS updates and still nothing.

  Does anyone have any ideas why I don't see bluetooth?

  I think that you didn't install the driver BT properly and didn t activate BT

  First download the pile of BT since this Toshiba BT Portal:
  http://APS2.toshiba-tro.de/Bluetooth/

  BT installation restart the laptop and turn it on by using the FN + F8 key combination!

  Hope that this will enable BT again

• Missing Bluetooth after upgrade to Windows 10

  I got a Yoga 2 13. I just finished the upgrade of 8.1 for Windows 10. After the upgrade I can't see the possibility to connect bluetooth devices, nor what I see the driver Bluetooth listed in Device Manager. I downloaded and installed the drivers for Bluetooth 10 Windows from the support site (2cyb01af.exe), but it still does not come back.

  I see a "unknown USB device (device descriptor failed) driver in the Device Manager." Show properties

  Windows has stopped this device because it has reported problems. (Code 43)

  A request for the USB device descriptor has failed.

  I suspect this is the driver for the bluetooth, but I'm not sure. If someone did an upgrade and had this problem.

  Hello Rick

  Yes, I've tried both and the Intel was one that worked.

  I was able to solve the problem. I had to do a full reboot, not only the windows restart. I finished the startup in the BIOS, the Bluetooth was back to check if there was something there that has been disabled, and when I went back to windows.

  Thank you

• No Bluetooth after upgrade to 8.1 Windows - model 1104TX (ENVY m6)

  Hello

  My system is HP Envy m6 1104tx. It came with Windows 8 (64-bit) preinstalled and everything was going well until I chose to upgrade to 8.1 Windows.

  After checking with CompMgmt.msc, I found that I had 3290 RaLink 802.11 Wi - Fi adapter. Just below NICs, I have "Other devices" and under "Bluetooth Controller" with a yellow exclamation mark on the subject. I tried to update the drivers, but it says "Windows failed to install the controller bluetooth"(pas pu trouver pilote logiciel pour votre périphérique). "»

  I've updated almost all possible device drivers, but this 'Bluetooth controller' still shows a yellow exclamation mark on it.

  Also in CompMgmt.msc I can't find "Bluetooth" or "Bluetooth Module" but on the contrary, there is a 'profiles Bluetooth device' and inside this 'Bluetooth Interface Driver profile '. I tried to update, but the result was still once, as mentioned above.

  So, how to solve this? How to make implementing Bluetooth on my m6 desire?

  PS And yes I ran Technical Assistance from HP, but it says everything is fine. And in reality it is not, Bluetooth does not.

  RENJ

  Thanks Makachaka,

  I really appreciate your time and your help. However your suggestion came a little too late.

  I had already solved my problem with Bluetooth using the instructions contained in the following web page:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/Bluetooth-systemthreadexceptionnothandled-blue/e9e410d4-ef73-40C2-9e4e-b05c5d604c6c?LC=2057&auth=1

  The gap only I took while troubleshooting from the procedure described in the page Microsoft above was that I didn't not apply the patch from Intel Bluetooth. The rest was exactly as described. Problem solved for me.

  @Makachaka: thanks and have a great year!

• No bluetooth after 9.2

  After the update to ios 9.2, my iphone 6 more does not respond to my remote bluetooth more. connect the remote control ("connected" in the bluetooth menu of the iphone), but does not control anything.

  any ideas?

  Thank you!

  just for the record: the bluetooth device records as "MOCUTE-032_XXXXXXX".

• Help with Bluetooth after installing new HARD drive

  The hard drive failed on my laptop HP Pavilion dm4 3099se Beats Edition son. I replaced the hard drive, installed and activated Windows 7 64 bit (using the key supplied with the notebook windows). I used an oem Win7 disc, not the recovery disk.  Then I installed the drivers needed to make it work again. But I can't get the Bluetooth works, even if the wifi works. Use the Intel ProSet Wifi driver but the Intel ProSet Bluetooth driver returns an error when it is installed... and Bluetooth does not appear in Device Manager.

  I installed the ProSet software also. It is also an error "can not properly installed. I have not installed the HP software (which I hope it is not necessary).

  Is there than a bluetooth radios category in Device Manager?

  If so, then the generic microsoft drivers have been installed.

  Otherwise, the device is not enabled and is not being picked up by Windows.

  If you have not installed the software of HP connection manager, and who controlled the bluetooth when you reinstalled the hard drive, you need to install this software, turn on the BT using this software and go from there.

  On some HP business notebooks computers where the wizard wireless HP (predecessor to the HP Connection Manager software) controlling the wireless and bluetooth at the same time and no device showing in Windows when I reinstalled the operating system, which has happened to me.

  After installing the Wireless Assistant software, the two aircraft were then visible and I was able to install the drivers.