When I check the updates, it goes into endless loop and never off.
Original title: windows updates
When I check the updates, it goes into endless loop and never off. Even if there is no new update, he said usaly. What is gpoing?
Please run the Windows Update Troubleshooter:
http://go.Microsoft.com/?linkid=9830262
Please provide details of any problem it reports as not fixed.
Tags: Windows
Similar Questions
-
I have an ifone6 that is not recognized by iTunes. It has a newer version of iTunes, but when I check the updates, it says I have the latest version. Thinking that it is a matter of Win XP. Thanks for help.
You can run the latest version of iTunes for your version of Windows, but you are not running the latest version of iTunes is available and it's iTunes 12.3. You must run Windows 7 at least. I'm not a Windows user, but I think 7 is newer than XP.
Check this.
-
original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.
I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
Then I used my disc XP Home (SP2) update. I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update". I, then, just kept hitting the page update and restart, until I find the SP3. Then, I took a break, until the next day.
I have an ADSL broadband, with a Linksys EtherFast PCI card.
Then I got SP3, which installed without any problems.
So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night. I think that I ticked the box "don't ask me about this update".
Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"]. What showed was 1 update - 955759 KB.
After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U". There is no updated list. Then I checked through my history of update (twice), and KB955759 had not been installed.
My update setting is to let windows download ('important') updates, but let me choose when to install them.
What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.
Comment 2: If you will not contact the MS Support on this issue?
~~~~~~~~~~~~~~~~~~~~~~~~~~
Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]). Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...
Repost...
1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?
2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)? .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed? .. .and if so, you manage to install it?
3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer? .. .and if so, you manage to install it?
... I guess that clearing the browser cache does not erase 'downloaded' updates.
Nope. If you want to clear the queue of the update...
OPTION A:
1. stop the automatic updates service:
Start > run > (type or copy/paste) services.msc > click OK
Double-click automatic updates > click stop
(Stopping the service will take a moment)2 remove the contents of the download folder:
Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
Open the download folder and delete its content
Close the window.3. start the automatic updates service:
Start > run > (type or copy/paste) services.msc > click OK
Double-click automatic updates > click Start
(Starting the service will take a moment)OPTION B:
1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]
2. make disappear/close the Troubleshooter automatically pop up.
3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]
4 reboot.
Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]
Check the located log file...
C:\Windows\Debug\ MRT. NEWSPAPER <>
Related...
... This leaves us with the malicious software removal tool don't appear not.
I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]
It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!
================================================================
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list. -
I have Lightroom 4.4 on my Mac laptop. It came with the purchase of a Leica camera. When I check the updates, the answer is that there is no update available. Download Version 5.7 of Adobe's Web site with no problems?
Your license for the 4.4 release will not work with version 5.7, you can download it without doubt, but if you do not have version 5.7 download then it won't do much good. If you do not have a license for it so you won't be able to use it beyond use of the trial.
-
I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?
In addition, the Console has opened with the same message several times, but I don't know what that means.
Any help would be appreciated.
Hello
The last is a picture of the Terminal window.
Just because it lists 'Console' does not mean that it has nothing to do with this application.
You have not said why or what you're trying to install so I can't help with that.
You can use the activity monitor to leave their.
After you select an item, use the X in a type of stop sign icon and confirm force quit.
21:36 Thursday; September 15, 2016
iMac 2.5 Ghz i5 2011 (El Capitan)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro (Snow Leopard 10.6.8) 2 GB
Mac OS X (10.6.8).
iPhone and iPad (2) -
When I check the link all that shows is http / / and nothing else. She does several times. I use Outlook for Windows 8.1. I have not tried the links embedded to see if this is a universal or just isolated problem to this email in particular.
You can follow the discussion in the bug.
- bug 1003082 - check/verification link broken in emails for confirming registration accountant Firefox sync if reading mail in Outlook
Please, do not comment in bug reports
https://Bugzilla.Mozilla.org/page.cgi?id=etiquette.html -
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2729450)Download size: 0 KB 0 minutes (downloaded; ready to install)
A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system. Details...Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656369)Download size: 0 KB 0 minutes (downloaded; ready to install)
A security issue has been identified that could allow an authenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system. Details...Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2686828)Download size: 0 KB 0 minutes (downloaded; ready to install)
A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system. Details...Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2604092)Download size: 0 KB 0 minutes (downloaded; ready to install)
A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system. Details...Hi Martin house,.
Welcome to the community Microsoft and thanks for posting the question.
According to the description provided, looks like you have a problem with Windows update.
I suggest you to see the steps in the following Microsoft article and check if it helps.
Windows Update or Microsoft Update repeatedly offers the same update: http://support.microsoft.com/kb/910339
How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation: http://support.microsoft.com/kb/906602
Notes:
The measures also applies to Windows XP.
Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756
The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.
If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
screen comes up. It is not on my laptop. How to disable or remove CC so I can get the necessary updates on LR 6
Hi Kafloyd71,
Please follow the steps below and try again:
Mac-
1 - CUT any installed security software with firewall system.
2. Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
3-go to: Apple icon > system preferences > Security & Privacy > General > "allow applications downloaded on" change that to ANYWHERE (to make these changes click the padlock in the corner at the bottom left of this window and enter your computer password)
These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.
Win-
1 - CUT any installed security software with firewall system.
2. Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
If it still fails, Veuileez follow the cleaning steps to manually remove the creative cloud of your machine, set out below:
MAC:
1-force Quit the sub process in the same sequence as shown below from Activity Monitor: see, use the monitor activity on your Mac - Apple Support
- Creative cloud
- Basic timing & sync to basic support
- CC library & process CCX
- Adobe Common Desktop
- Adobe update daemon
- Broker CIB Adobe
- After that, everything that said adobe on it do a force quit for her
2-go to: Finder > Applications > utilities > Adobe installer > uninstall Adobe Creative cloud (if problems uninstall Trash)
3-go to: Finder > Applications > utilities > (delete these two folders - creative cloud Adobe and Adobe Application Manager)
4. then run the cleanup tool to remove the clouds creative and Adobe Application Manager (if it remains in the machine)
5 right-click on the icon in the Finder, then select 'Go - To' folder.
6. you will get a text box, type in the following command and then press 'return '. ("Not to be missed ~ symbol")
~/Library (It will open the folder of the user's library.)
7. browse to the Application Support > Adobe > OOBE folder and folder AAM Updater so trash
8. new > right-click on the icon in the Finder and select "go to" folder option. > you will get a text box, type in the following command and then press the 'return '.
/ library (It will open the library system folder.)
9. browse to the Application Support > Adobe > trash folder OOBE and Adobe Application Manager / after that, rename the SL-STORE like SL-STORE_OLD
Adobe 10 - run cleanup tool. > If so, select "Adobe Application Manager for Mac OS X 10.6 ' and then click on"Clean up selected. "
http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg
WINDOWS:
(1) uninstall Creative Cloud Desktop Manager:
Using creative cloud | Uninstall the creative cloud desktop application
(2) delete following folders: (if you do not see any folder skip this step)
C:\Program Files (x 86) \Common Files\Adobe\OOBE
C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager
C:\Program Files (x 86) \Adobe\Creative Cloud files
C:\Users\
\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is folder hidden please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista) \Adobe\ DONNÉES C:\Program rename SL-STORE like SL-STORE_OLD
Let us know if that helps.
-
Cannot update Windows Vista, with the update functionality.
Hey Charley,
Welcome to the Microsoft Community and thanks for posting the question.
According to the description, you can not install Windows updates.
This problem can occur because of inconsistencies in Windows Update.
Perform the steps from the link below and see if it helps.
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/( )
Warning of Chkdsk.
Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.Hope this information helps.
Answer to us if you have problems with Windows Update or any other issue of Windows, and we would be happy to help you.
Good day!
-
After downloading XP SP3 computer goes into endless loop of startup
Information system
HP Compaq Presario processor 3400 AMD Atholn 64
Windows XP Home Edition SP 2 Version 5.1 (32 bit)
After you download the SP3 of XP when the computer restarts, it goes into a restart without end. It will get so far in the reboot and it will start all this will last until it is put in safe mode or cut. I had to put it in safe mode and go back to a previous restore point to get the computer usable again. I read that the Intel chips are not the problem but I'm not sure of the correction.
Please see for a resolution on this subject - is your boot AMD computer after installing XP SP3?
Expert MowGreen Windows IT Pro - consumer safety
-
LaserJet P2035n goes into infinite loop when you print from Windows 7 64 bit
I installed the latest drivers from this site for Win7 64 bt and whenever I try to print on my laserJet P2035n on the network, it goes into a loop and sends the same print job again and again until I cacel work on my PC.
Anyone know why this is happening and how reolve it?
TIA,
Joe
According to HP tech who helped shed some light on this for me
for Windows 7 32 bit
for Windows 7 64-bit
Right-click on the file, choose Properties, and select the appropriate compatibility mode that corresponds to that specific folder that you downloaded.
HP technology has solved as fast it takes to install a printer successfully. I went and done it for the rest of the printer to the breast of our society and all the world works perfectly.
-
I can't check the updates with Windows 7 computer
I have a Windows 7 laptop. When I check the updates, I get error code 80072F8F. No matter what I do to update the date and time, it may not always check the updates. The last successful update was on September 19. I tried to ask a person to Microsoft through online help. She had me try all sorts of things during the past month without result. Finally, she transferred my problem to his supervisor, who told me that I had to completely reinstall Windows. I don't have a disc of Windows 7 because it is preinstalled on my laptop. She then told me that she would transfer my problem to a COMPUTER technician who would call me. No one has called. I have sent to let her know I had not heard anything, and in response I received an automated email stating that my problem has been resolved and that my case has been closed. Someone please help! My computer has not had an update for 3 months!
This isn't the problem, as I said in my question above. It has nothing to do with the date or time.
I just found an answer, tried and it works!
Here it is:
MikeGrimes
2Already votéPLEASE NOTE: The following instructions are specifically for ESET Smart Security or NOD32, however, I suspect other programs where content filtering of the SSL connections may cause this problem too.
You run ESET/NOD32 Antivirus? If Yes and you have active SSL protocol filtering you add an exception
(1) open the main window of ESET by clicking the ESET icon next to the clock system or by clicking Start > all programs > ESET > ESET Smart Security or ESET NOD32 Antivirus.
2) press F5 on your keyboard to open the advanced configuration window.
3) navigate to Antivirus and antispyware > protocol filtering > SSL. Click on "ask on sites not visited (exclusions can be set). Click OK.
(4) check the Windows updates
(5) a pop - up of ESET will inform you about an attempt to communicate over SSL. Click on exclude.
(6) that excludes the verification by ESET update Windows. Exclusions are kept in the Antivirus and antispyware > protocol filtering > SSL > Certificates > excluded certificates.
(7) to navigate back to the Antivirus and Antispyware > protocol filtering > SSL. Restore the SSL filtering to your previous setting mode, that is to select the option "Always scan SSL protocol".
(8) check the option ' apply created exceptions based on certificates "is selected. Click Ok to close the advanced settings window.
Alternatively, you can simply disable SSL filtering in step 3.
-
OIM11gR2 Manager: Event goes into infinite loop
Hi Experts,
I created an event handler where I do some features on run the function, that updates some UDF of when a user changes the value of the user change the shape.
I call the event hanlder on change the action of the user entity
Now the problem I faced is the eventhandler goes into infinte loop and changes the values over and over again without interruption.
You can help, I am not able to kill the process unitill I restart the server :-(You can use something like below to get the old values:
HashMap
User newUserState = interEvtDataMap.get ("NEW_USER_STATE") (oracle.iam.identity.usermgmt.vo.User);
User oldUserState = interEvtDataMap.get ("CURRENT_USER") (oracle.iam.identity.usermgmt.vo.User);
newFirstName = (String) newUserState.getAttribute ("First Name");
oldFirstName = (String) oldUserState.getAttribute ("First Name");Thank you
Suren -
* Original title: updates
When I try to check the updates of windows on windows 8 I get this code...
WindowsUpdate_8024a000
Thank you in advance for your help!
Rick
Please run the Windows Update Troubleshooter:
Download it from this link.Please provide details of any problem it reports as not fixed.
-
When I try to check the updates of windows I get error a 8024, 000.
* Original title: cannot install windows updates
Hello!
I hope someone can / will help!
When I try to check the updates of windows I get error 8024a 000
and cannot verify or install
Windows 8
I ran the windows troubleshooting and gives me this code.
Thank you very much!
Rick
Technical details according to the here:
0x8024A000
WU_E_AU_
NOSERVICE
To THE put incoming calls to THE service.
Looks like a dependency is missing.
Use the following tutorial to reset Windows updates completely and check if it helps:
Be sure to run the script as administrator.
Maybe you are looking for
-
Impossible to uninstall firefox 31.1 on windows 7
I tried to uninstall it using the option of area programs and features in Control Panel, as well as the case of uninstall in the program files folder. I ran this time as a normal user and as an administrator without success. I have will go through th
-
HP t5740e Embedded W7 - failed to access my music/photos/videos
Hi all. I bought a HP t5740e computer ThinClient, disabled EWF file protection, rebooted the computer, removed "User", removed the 'Administrator' password, but I still cannot access folders my videos/music/images found in "My Documents". They are lo
-
Problem installing disktop 800 wireless drivers for windows xp
Problem installing disktop 800 wireless drivers for windows xp
-
Impossible to get in my Web page ftp site administration and I urgently make changes to my pages.
Until very recently, another person manages my site for me, but unfortunately not now the fact. I am trying to access my ftp site to change several pages, but my computer will not allow the page to be downloaded. It indicates that maybe that's a pr
-
I don't think that when I turned on my laptop before asked that the password and now it's
I don't think that when I turned on my laptop before asked that the password and now it's She named me and under my name is my gmail account any suggestions on how to get on my computer? Original title: I have windows 8 on my laptop