Brand of the CardBus controller on G20?

Similar Questions

• Satellite P100 - 444 PSPADE: need the Cardbus controller drivers and ultramedia for WinXP

  Hello, I have a Toshiba Satellite P100 - 444-PSPADE and I need Cardbus and ultramedia controller for Windows XP drivers, please.

  I did not find them on the official website of Toshiba. Thank you.

  Hello

  won´t you need them, the drivers for cardbus to be included in the utility/driver chipset from intel. Other stuff like flashmedia etc. will be installed when you install the flashmedia driver.

  See you soon

  P.S.: If you have already installed everything then check your device if Manager something is missing. If everything is installed, then relax and be happy.

• What is the hole behind the Apple brand on the iMac 21 "?

  What is the hole behind the Apple brand on the iMac 21 "?

  Don't know what you're talking about. A picture would help.

• Satellite Pro M70 - ist is possible to change the craphics controller?

  Is it possible to change the graphics controller to my Satellite Pro M70...
  If so, where to buy a new one?

  THX

  Hello

  Well, in general it s is not possible to replace or update the graphics card.
  But I compared a Satellite Pro M70 unit because this series of laptop was delivered with different hardware configurations and I found that these installed graphics cards:
  Mobile Intel 915GM Express Chipset AlvisoGM 8 MB to 128 MB shared video memory
  ATI MOBILITY RADEON X600SE 128 MB of video memory
  ATI MOBILITY RADEON X 700 256 MB of video memory

  However, in my opinion you can not change the graphics card

• Satellite 2710 XDVD: the graphics controller hardware specification

  Can someone tell me about specific electrical equipment of the graphics controller (manufacturer, type, etc.)?
  And what kind of changes are in the BIOS version 7.60?
  Can I install more than 192 MB of RAM?

  Thank you very much

  Post edited by: philips

  Hello

  in the specification of this machine, I found that there a Trident Microsystems Cyber 9525 graphics card.
  And he says that the laptop can not use more than 192 MB of RAM.

  Good bye

• Satellite C660-117 - where to download the Ethernet controller driver?

  Hello.

  Can someone please help with my laptop? Here's my laptop specs:
  Model: Toshiba Satellite C660-117
  Part number: PSCOLE-00Y00JEN
  Serial number: XA458343K

  I have just rewiped my laptop with Windows 7 Ultimate. I use the laptop on a wireless connection. In Device Manager, I have an exclamation mark next to the Ethernet controller. This prevents me from going online.

  Can someone direct me please the link to download some driver I need?

  Thank you much much in advance.

  Dennis.

  Hey Buddy,

  Controller driver Ethernet can be both: WLAN or LAN card. All the drivers and tools can be downloaded from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  You have installed Windows 7 Ultimate, but may I ask why you haven t used the Toshiba with Windows 7 Home Premium recovery disc? On this disc are all the drivers and tools are installed because it s a picture of factory for you don t have stress with driver and installation tool.

• Satellite A100-773 - how to install the Ethernet controller driver?

  Hello

  I reinstalled Win Xp Prof on my satellite A100 - 773 (PSAA9E) and have a problem with the Ethernet controller. In Device Manager, the controller is marked with a yellow '?'.

  I use this driver http://de.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=DE&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 624 & selSho rtMod = 444 & language = 17 & selOS = 10 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 12 & electedLanguage s = 17 & type = all & page = 2 & ID = 55434 & DISO = 1 0 & driverLanguage = 42

  Install it on the Device Manager and right click on ethernetcontroller - installation driver. This is the message that no driver is found (in the right! folder) nothing can be installed...

  I also remove ethernet controller, so that windows automatic reseacht for this, but nothing works.

  I don't know what I can do

  PS: Chipset utilities are installed

  Hello

  I can post a link where you can download the driver but I put t know what driver is missing now. Do you mean the WLAN or LAN card? What is the device?

  Please check the vendor and device ID to identify which device needs a driver. Go to Device Manager > right click on Ethernet controller > properties.
  There you should find some information like PCI\VEN_xxxx & DEV_xxxx
  With these codes you can look here to identify the device: http://www.pcidatabase.com/

  After this verification, the page of Toshiba to download a driver.

• Upgrading the graphics controller on Satellite A30-404

  I have a Satellite A30-404 with a relatively weak Intel® 852GME Graphics controller, some people say that you upgrade this computer laptop isn´t possible since the graphics controller is onboard, but after some research on www.intel.com I came to the conclusion that this chip after all is not onboard but is a slot to order ATI or Nvidia a better graphic chip trough. but iam still not sure if the chip is integrated or not so I wanted to know if this is possible

  Hello

  On the net I found detailed information on the graphics chip:

  Intel 852GME graphics controller
  Montara GT code name
  Yes engine 2D
  Yes 3D engine
  64-bit memory data Bus width

  But as far as I know it s not possible to update the graphics card.
  If you want you can ask to view ASP.

  Good bye

• HP2000 2D09SLA, cannot find the network controller driver after reclassification of win8 base to win8pro

  HP2000 2D09SLA, PROFESSIONAL 64 BITS OF WINDOWS 8.

  After installing windows8pro, I could not find driver for network controller, since then I can not use my wireless.

  Hello:

  Follow these steps, and I'll post the link to the wireless driver you need...

  Go to Device Manager, find the other devices category, click the network controller needing drivers.

  Then click on the Details tab at the top of the control of the network window.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters that start with PCI\VEN.

• Assignment of VLAN dynamic by using the WC7520 controller

  Hello

  I use a few AP WNDAP360 for awhile and consider adding a WC7520 controller.

  However, I would use an assignment VLAN dynamic using a RADIUS server.

  Whereas it is possible with the 360 in stand-alone mode, it is clear to me if this can be done by using the WC7520 controller.

  The (obsolete?) reference manual said not a Word to this topic...

  Is there someone to share experiences with the 7520 and this type of configuration?

  Hello

  Thanks for your help!

  After reading the articles you suggested, I was still unable to find a definitive answer, so I asked pre-sales support and quickly received the following response from Tech Support level 2:

  There was a feature request to ask to implement, but it looks like it will not be implemented for the WC7520. Also, there is a feature request for the WC7600 which looks more promising, but still not possible currently and is not guaranteed to be implemented.

  In short: no, it is not possible, will not be on the WC7520 and could become so on the WC7600.

  Too bad, and it makes the much less interesting WC7520 for me, but at least it clearly quickly.

• Satellite A105-s4064: where to find the Ethernet controller (LAN) driver?

  Hello, I was recently forced to reformat my Satellite A105-s4064 due to some virus problems, and now when I look at my device manager my Ethernet controller is not installed.

  I checked the main site and they don't have an Ethernet controller I've ever seen.
  I can just be giving on it or research in the field of evil, but anyone know where I could find the Ethernet Controller driver for my laptop?

  Thank you
  Chris

  First of all, it would be interesting to know which driver LAN do you need? XP or Vista

  Second, the A105 laptop is an American series. I know that because of the last digit in the model number. 5 at the end means that it is a series that was designed for the American market and you need to find the drivers on the Web from Toshiba site we!

  However, if I understand correctly, you have already activated the Device Manager and the network card is not in the network adapters. There is an unknown device. Am I wrong?

  Often the LAN chip must come from Realtek. Then maybe you should try to download the driver directly from the Realtek page.

  Check it out

• Error message during the installation of the cardbus on Satellite M70 driver

  Hello!

  When I install the cardbus driver pops up an error: unable to launch sdsmswch and stops the installation.

  Why?

  THX, ciao!

  Hello

  Sorry, but it is not easy to offer so just answer. If I tell you that I can't start my car and ask you why you will probably say the same thing.

  I put t know what you are doing with your laptop, but the fact is that after installing the Toshiba recovery image, everything should work although on my Satellite M70-159.
  So, I guess that you install your own operating system. Am I right about that?

  If so please use the instructions facilities document and follow this order of the facilities.

  By the way: you have extracted the files downloaded on the HARD drive and from there began to setup.exe?

• Problems with the Ethernet controller and PCI Satellite L30-10 X device driver

  HelloW!

  Sorry for my bad English, I'm from the Russia.
  A few days ago, I bought Satellite L30 - 10 X with W Vista on board. In my opinion, that this OS does ' t very good on this computer, so I install W XP.

  I have some problems with drivers. At first, I don't know which model I have: PSL30 or PSL33? I have download all the drivers for the two models. But after installation, computer doen't find the drivers for the Ethernet controller and PCI device...

  Hello

  Satellite L30-10 X belongs to the series of PSL33E. This number located on the label on the bottom of the device!

  You must choose this number in the form of driver download for XP compatible drivers.
  I put t know why you are not able to install the LAN driver. I have the same laptop with Vista and I've install the XP and all the drivers will work perfectly.

  I assume that you have installed the drivers in the wrong order. Please take look in the Toshiba installation instructions txt file. In this order, install the driver! This is important.

  I think that you should install XP again to ensure that the registry clean, then download and install the XP drivers compatible as mentioned in the installation instructions file.

  Good luck

• Satellite P300D-10U - how to enable the AHCI controller in the Bios

  I have toshiba satellite P300D-10U with windows vista 32-bit, disc ssd drive 2nd hard drive
  and I can't do IT controller SATA AHCI in the bios.

  http://www.Toshiba.EU/discontinued-products/satellite-P300D-10U/

  What can I do?
  install the new windows 7 32 / 64-bit and updated the bios for this maybe windows I can ON AHCI Controller in bios

  This bios has the ability to run on AHCI?

  Thanks for replying,
  Thank you.

  BIOS of the screen:
  http://ImageShack.com/a/img745/6711/ez591J.gif
  http://ImageShack.com/a/img901/7149/SRjUz3.gif
  http://ImageShack.com/a/img743/7539/8Pt5ro.gif
  http://ImageShack.com/a/img901/8573/iPfiOZ.gif
  http://ImageShack.com/a/img746/7872/T3nBfa.gif

  SSD of the screen
  http://ImageShack.com/a/img908/4148/ZjaDr1.gif
  http://ImageShack.com/a/img661/9900/846hMR.gif

  I changed the value to 0
  HKEY_LOCAL_MACHINE es\Msahci

  I install ATi SATA2 RAID (pilot preinstallation)
  http://www.gigabyte.com/products/product-page.aspx?pid=2500#DL

  CD..

  To my knowledge, the Satellite P300 series BIOS doesn t contain the ability to switch the AHCI compatible mode.

  I don t think that even after updating the BIOS such option would be available in the BIOS.

  I see on the first screenshot of the BIOS, the SSD drive is connected to the second controller.
  I recommend you connect the SSD to the first controller (instead of the HARD disk).
  Maybe then you could get better performance.

  Just for the note: portable computers with a graphics card ATI supports the AMD chipset, and in this case the ATI graphics card driver contains the SATA driver files.

  However, I guess the HARD disk controller specification allows the use of better performance of SSD drive.

• Installtion of Labview RT on the PXI controller

  We have a 8106 controller PXI that runs on the Windows operating system. We want to make it work on real-time OS of NOR. What are the steps I need to do to install this. Vascular when I boot in the BIOS of fron LabView RT, it displays "control transfer to the user program. System not configured, restart... ». I am able to connect it to MAX by the host PC and able to install Veristand 2011. But it does not reflect while the boot controller.

  Converting Windows a RT, there are some very important things that you must do to handle the conversion. big is your hard drive.  Your hard drive needs to be formatted with a FAT32 partition - probably formatted Windows NTFS, RT cannot read or use.  Convert your drive will be a manual step for you; If you follow these steps, you can use a disk RT PC Desktop Utility to perform the Exchange against (these instructions with a PXI-8106 module):

  First of all, must be a FAT32 partition on it and the format.

  1. Acquire a drive Flash USB 256 MB or more.  Plug it into your host computer.
  2. Image/Format the USB Flash drive via MAX
     • Under tools of-> creating USB utility MAX desktop PC
  3. Plug the USB key into 8106
  4. Enter the BIOS of 8106 using the "Delete" key
  5. Go to the menu "LabVIEW RT" and "Priming" the value "" Windows / other OS '. "
  6. Press F10 to save and exit, restart the controller.
  7. Enter the BIOS of 8106 using the "DELETE" key (we had to put the controller for Windows / Other and restart the computer to enable USB be detected/used)
  8. In the 'Boot' menu, make sure that "USB HDD" (probably also has your mfg of the inserted USB) option is #1 in the startup list (using keys + /)
  9. In 'Advanced-> Integrated Peripherals' ensure 'Legacy USB Support' is [ENABLED].
  10. Press F10 to save and exit, restart the controller.
  11. The startup controller using the USB flash drive.
  12. In the USB Flash Drive Options, choose the 6 'Options of Format' option (according to the image of the flash player, can say another thing, but option # is the same).
  13. Choose to format the drive, use the Option #2 in the format "Erase all Partitions on the disk and create a new single Partition" - This clears the disk partition information and creates a single FAT32 partition on the drive.
  14. FAT32 format (DO NOT use the use of a 8106 - BIOS does not include the system of dependency files).
  15. Once completed, restart the controller (to do this, you can use Option 9).

  Now, we must get the controller to think that it is a PXI and not a desktop RT PC controller

  1. Enter the BIOS of 8106 using the "Delete" key
  2. Go into the menu "LabVIEW RT" and "Boot" "LabVIEW RT safe mode" value
  3. Press F10 to save and exit, restart the controller.
  4. In MAX, find the device to remote systems.  Right click on the device and choose "format disk".
  5. Once you format the disk, the controller will think it is a PXI controller.
  6. (You may need to remove the MAX controller and press F5 to detect again for updated images)

  Now we are going to put the controller in RT mode so we can use it.

  1. Enter the BIOS of 8106 using the "Delete" key
  2. Go to the menu 'LabVIEW RT' and 'Start Configuration' value 'LabVIEW RT'
  3. Press F10 to save and exit, restart the controller.

  There you go.  Now you are ready to rule the world in a deterministic way.

  -Danny