breaking changes in the watch expression

Similar Questions

• Breaking change in the interaction of the COM. Calls to methods results in Acrobat crashing after DC October 2015 update.

  This seems to be an another breaking change introduced with the release of October 2015 DC Acrobat.

  COM interaction no longer works as it has been, it seems. For a very long time, it was possible to call the Acrobat application with other COM enabled languages such as VBA and Visual c# programs. I always get an object reference, but the methods trigger errors AccessViolationException.

  Very simple code example (c#) that no longer works (the method of GetNumAVDocs() worked last week):

  // Add "Acrobat" under References.
  using System;
  namespace ConsoleApplication1
  {
      class Program
      {
          static void Main(string[] args) {
              // Get the current Acrobat instance.
              var app = new Acrobat.AcroApp();
              Console.WriteLine ( app.GetNumAVDocs());
          }
      }
  }
  
  

  The above code generates this error:

  System.AccessViolationException was not handled

  HResult =-2147467261

  Message = attempt to read or write protected memory. It is often an indication that other memory has been corrupted.

  Source = TestPdf

  StackTrace:

  at Acrobat.CAcroApp.GetNumAVDocs)

  [...]

  Calls to other methods such as the app. Show() result in the same error.

  I don't find any note on any type library more recent than the "Adobe Acrobat 10.0 Type Library', which I use.

  What happens, and what should I do?

  I've not seen anything COM support being removed.

  Best regards

  Andreas

  After performing a repair installation of this error has not appeared once again, and users who reported this error confirmed also all first the AccessViolationException is is more triggered after that they did a repair installation too.

  So, if someone get the error in the original question: perform a REPAIR installation!

  Best regards

  Andreas

• Change the XPath expression in the data

  Hello
  
  We have about 2000 variables that are mapped on the underside of XPATH. Now there is a change in the XPATH expression, and new nodes are introduced now.
  
  ! Request/XmlTransaction/Quote/Product/Form/FormMetaData/NonParseData/FormVariableData
  
  ! Request/XmlTransaction/Quote/Product * / rental/Section / * Form, FormMetaData, NonParseData, FormVariableData
  
  Is there a way where I can change all of these XPATH using the wizard of Documaker Studio. We tried to export files FAP and did a find and replace in all files in Notepad and then imported again but the Studio does not show them correctly.
  
  Before exporting data mask
  
  VARIABLE 1
  ! Request/XmlTransaction/Quote/Product/rental/Section/Form [FormId = QE5837] / FormMetaData/NonParseData/FormVariableData/QE5837/FIRST_LIMIT_LIABILITY
  
  VARIABLE 2
  
  ! Request/XmlTransaction/Quote/Product/rental/Section/Form [FormId = QE5837] / FormMetaData/NonParseData/FormVariableData/QE5837/DATE_1_O
  
  VARIABLE 3
  
  ! Request/XmlTransaction/Quote/Product/rental/Section/Form [FormId = QE5837] / FormMetaData/NonParseData/FormVariableData/QE5837/EXCESS_LIMIT_LIABILITY
  
  4 VARIABLE
  ! Request/XmlTransaction/Quote/Product/rental/Section/Form [FormId = QE5837] / FormMetaData/NonParseData/FormVariableData/QE5837/DATE_2_O
  
  
  After the export in the Studio
  
  VARIABLE 1
  ! Request/XmlTransaction/Quote/Product/rental/Section/Form [FormId = QE5837] / FormMetaData/NonParseData/FormVariableData/QE5837/FIRST
  
  VARIABLE 2
  ! Request/XmlTransaction/Quote/Product/rental/Section/Form [FormId = QE5837] / FormMetaData/NonParseData/FormVariableData
  
  VARIABLE 3
  ! Request/XmlTransaction/Quote/Product/rental/Section/Form [FormId = QE5837] / FormMetaData/NonParseData/FormVariableData/QE5837/EXCESS
  
  4 VARIABLE
  ! Request/XmlTransaction/Quote/Product/rental/Section/Form [FormId = QE5837] / FormMetaData/NonParseData/FormVariableData
  
  We could see that search data is truncated during import. We use Studio 12.1 on Windows Server and our resources are stored in the UDB database in Solaris.
  
  Thanks in advance.

  Hi Pierre,.

  It is not a section of editting good idea in Notepad. If you want to change XPATH in this mode, in addition to the action 'replace', you'll need to find the length of the XPATH expression, you will replace. This information you will also need to be updated accordingly to the line in which your XPATH is replaced. Otherwise when you check the FAP to library, Studio will read only up to the length of previous XPATH.

  for example: length of the underside of XPATH is 106
  ! Request/XmlTransaction/Quote/Product * / rental/Section / * Form, FormMetaData, NonParseData, FormVariableData

  Hope you consider XDD concept in such scenarios.

  Thank you
  Caty chirani

• Debugging the XML Variables with watch Expressions

  
  I have a Flex demo application I am debugging. There is a variable defined as follows:
  
  var itemToUpdate:XMLList
  
  If I add a trace statement as follows, I am able to see the value of the quantity displayed in the Console:
  
  trace (itemToUpdate.Qty); <-it works!
  
  But if I add an "Expression" in the debugger, like this: "itemToUpdate.qty." I get the next value in the 'Expressions' debug display: "< errors during evaluation >.
  
  What I am doing wrong? Why can't I add watch expressions for a type of XMLList?
  
  Version: Flex 2.01

  As has been pointed out by Amy, watch flex debugger cannot evaluate expressions e4x, however, you can assign the value of a string and watch the channel. This will not allow you to change the value of e4x on the fly if that's your goal, but it is nevertheless useful to simply see what is affected without setting breakpoints and manually search in the list of properties for the desired value. If you are evaluating a single xml node and that you want to display the entire xml code be sure to use the method. toXMLString().

  assuming that the quantity has a value of 12:

  var val: String = itemToUpdate.qty;
  implicit cast results in val is "12", even as itemToUpdate.qty.toString)

  but

  var val: String = itemToUpdate.qty.toXMLString ();
  Let the intact on a single node xml syntax, val would be "12".

  I hope that I don't confuse the subject, good luck.

• Can I change the band on the watch for the ceramic version?

  Can I change the band on the watch for the ceramic version?

  Hello

  Yes - all Apple Watch bands will be adapted to any Apple Watch of the same size of the case (42mm or 38 mm).

• Watch is now no paired phone. The watch displays now wrong password, which must be changed on the phone.  However, given that the watch is more matched with the phone, I can't the available option to change the password.  Help please!

  I have a watch that has become not matched with the iPhone with it's Setup.  It is locked with a password and the dial of the watch indicates "Wrong password" and I have to open the App to Apple Watch on my phone to re - activate the entry of access code and try again.  However, the iphone has stated that on the phone became not paired with the watch, so I can't do anything, there is no option to change the password and I can't pair the watch with the phone because it is locked.  This is my boss's phone... Help, please!

  If you have forgotten the password for your Apple Watch - Apple...

  < edited by hosts >

• Change of DRAC 6 express to the DRAC III on a R710

  PowerEdge R710

  It currently has a

  Integrated Dell Remote Access Controller 6 - Express. Version 1.70

  We need to change to a

  DRAC III

  are there instructions, questions, or is it just a matter of setting power off take the Express outside, put the DRAC III in and prompted - on the contrary - at startup?

  Best regards Martin

  Martin,

  The DRAC III is not an option for support on the R710. The only one that will work in the R710 is the iDRAC6, Express versions, and the company.  There is no instructions available for this process.

  Kind regards

• When I turn off my Apple Watch and then turn it on, the face of the watch I changed other randomly

  Every night I turn off the Apple Watch and the next morning turn it on. Recently it chages the Apple face a random and erase one had. I have restore the

  Hello

  If you have not already done so, it can help to upgrade your iPhone and Apple Watch to the latest version of the software, from your iPhone:

  • Update the software on your iPhone, iPad or iPod touch - Apple Support iOS
  • Update the software on your Apple Watch - Apple Support

  Rather than spend your watch every night, you can find more convenient to charge your watch every night, from one day to the next.

  The watch cannot be overcharged, and the battery won't suffer harm of regular refills done every day. The load will automatically stop when the battery is fully charged and will start again if necessary due to the use of the current battery.

  Follow Apple's safety and handling instructions, and note also that:

  • It is not possible to turn the watch off the coast while it is on the charger and connected to the power supply - what is normal.
  • It is also normal to watch, adapter sector and charger become hot when it is connected to the power.

  More information:

  Check your battery and load your Apple Watch - Apple Support

  Keep Apple Watch in acceptable operating temperatures - Apple Support

• Can I use the watch on my right wrist?

  I find myself handed is it possible to use the watch on my right wrist and the button to the left without the screen being backwards?

  Hello

  Watch Apple Watch can be worn on each wrist and with the buttons on each side.

  To change the configuration, on your iPhone, in the application of the watch, go to: My Watch (tab) > General > shows the direction > choose favorite wrist and the side buttons which will be located.

• How to put in the front of the watch during swimming to see heart rate

  Received the Watch 2 day and taken for a swim practice in the pool (of course)

  happly to see enough faithfully has towers and gives average heart rate but only AFTER training

  I wanted to 4000 m (and I fact..) but from the exercise the watch when asked for the total calories to burn.

  QUESTION 1: how to set the distance (rather than calories)? At the start of the year?

  While the dial of the watch training appeared when out of the water and gave the number of laps, total distance, total time of exercise and calories burned.

  QUESTION 2: you can change the information presented during the swim to see heart rate? (Rather than the number of Calories predictable)?

  NOTE

  For swimming training, the watch is a bit disappointing, given that in the swimming training, you normally do a few repetitions as 10 x 100 start each 01:30 or 01:45. I normally use the watch of Garmin swimming to take the time (100 m start button and press again on arrival) of the clock, then briefly shows duration of the tour and afte 4 continuous seconds so you can see when you start again (e.g. to 01:45). I hope that there will be a third-party solution soon for Apple Watch 2, while I don't have to swim with two watches...

  Hello

  1. After selecting the length of the pool, slide laterally on the screen to move to a distance goal, which can be set in meters or yards (firmly press the screen to switch between them).

  2. follow the following steps to customize the information displayed by the application of training during your workouts in the pool swimming:

  • On your iPhone, in the application of the watch, go to: Watch My > training > training view.
  • Choose several metrics.
  • Tap pool swim > press on edit (top-right) > select up to 5 parameters, including heart rate (they can be arranged in your order of preference).
  • When you are finished, tap on Done (top right).

  More information:

  Work with your Apple Watch - Apple Support

• By dictating the long notes, using Siri, Siri will stop as soon as I take a little break. Therefore, the note ends abruptly. Any solution for this?

  By dictating the long notes on Mac using Siri, Siri will stop as soon as I take a little break. Therefore, the note ends abruptly. Any solution for this?

  For long notes, you are better to use regular old dictation - under Mac OS for a few years now, Siri is not mandatory.

  To activate it, go to "System Preferences"-> keyboard-> dictation. Once enabled, you can press the "Fn" key twice to activate and dictate the long notes in any application.

  Siri is optimized for short, quick things. I don't think that you can change, you just use the method that is better to listen to what you want to do at the time (short notes, using Siri. Long notes, use dictation).

• My repertoire is not now responsible to the vehicle (VW Golf GTI MY08 with BT fiscon system) all work fine until I received the watch

  Hi all, very much has been said about the Apple Watch and the changes it makes or should I say priority, she resumed vehicle Bluetooth system.

  Since owning the Apple Watch I have has problems of Bluetooth, more with my directory does not not upward. All other functions appear to work correctly. My repertoire is not now responsible to the vehicle (VW Golf GTI MY08 with BT fiscon system) all work fine until I received the watch.

  Counsel there or just wait for an update?

  I look forward to hear from you

  < re-titled by host >

  The issues raised in your vehicle only persist when your watch is paired / with you in the car?

  I suspect either a material limitation / bandwidth here, or perhaps a software update for BT to your car system may be necessary.

• My Apple Watch asked the password whenever I raise my hand.  He normally only for this, after I removed the watch and put it back on.

  My watch ask me the password whenever I raise my hand to look at. He normally doesn't do that when I removed the watch for charging.  I haven't changed anything so I don't know what causes this problem.  Help, please!

  Hello

  The following steps may help:

  • Make sure detection of wrist is still open:
    • On your iPhone, in the application of the watch, go to: Watch My > General > detection of wrist - turn on.
  • Make sure you wear your watch sufficiently snug on top of your wrist (if it is worn too loosely, your watch may believe that he had been removed from your wrist).
    • Port Apple Watch - Apple Support

• Cannot find the Airport Express Airport utility

  Hello

  I have a firmware running extreme Airport 7.6.7. 6.3.6 and one Airport utility Terminal Airport Express (model A1392). I have access to my system on a Macbook pro. Also have the app on my iPhone.

  My Airport Express and extreme talked to each other and have been broadcast on the Airport utility. However, I had to change my wifi password and the network password. After that, the Airport extreme restarted. After the reboot, my Express was no longer recognized by my network. The Express has a light orange and blinks repeatedly. I can't connect to the express to address the issue of amber light.

  I have read many posts on the forum. However, I still have to find a solution. How to connect the airport utility to the Airport express?

  Thanks for any help, you can make it,

  You have changed the password for WiFi on AirPort Extreme... but... the AirPort Express Terminal was previously programmed to connect by using your password in the "old".  The Express is lost, unable to find the network at all and doesn't know what to do.

  You can help the AirPort Express by doing a hard reset on the AirPort Express to clear the old network settings and passwords, and then configure the Express again to connect to your network 'nine' with the 'new' password.

  After the back if you don't know how to proceed.

• Can not update the settings on the Airport Express

  Currently have a facility - two extremes and an Express network.  I for the life of me can't update the Express settings. I always get an error message but I can update the settings on the two extremes very well. I can make changes to the Express with my Iphone but I can't with my Imac.  I want to activate the function of 5 GHz but I can't do that via my Iphone - with the desktop app I think.  Can someone help me?

  Let's first check and make sure that on which Airport Express version you have.

  Your version of the AirPort Express is there only 1 or 2 Ethernet ports?

  The Express to connect to your network and extend it wireless?  Alternatively, the Express connects to one of the extremes airport using a wired Ethernet cable connection.

  Then, I would be not too concerned of not being able to 'see' the Express of the iMac as long as you can access the settings of the iPhone. You can make almost any change using the iPhone you can use a Mac.