Cannot find the Airport Express Airport utility

Similar Questions

• Cannot find the Outlook Express password

  where di I find my Outlook Express password? I do not use one to access my e mails

  The OE logon password:

  Your ISP may be able to tell you, or check out this site for a tool recover your password to the E-mail account:
  http://www.NirSoft.NET/utils/mailpv.html

  For a password to the identity:

  http://insideoe.tomsterdam.com/FAQs/how.htm#delnopass

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Cannot find the airport and cannot reset to factory settings

  I have a 2 TB Time Capsule airport who unfortunately through a handful of the network changes, somewhere along the lines, I pressed "forget the device" and now for the life of me, I can't connect to it.

  I'm unable to reset to factory settings, because I have about 1 GB of data and Time Machine backups on it.  Is it possible can recover and make it visible again so I can continue with my backups, without reset it completely?

  Reset time Capsule, regardless of the type of reset you, affects all data stored on the internal hard drive of the TC.

• Cannot complete the installation express airport using iOS.

  I go to Wi - Fi and find the aiport express under the heading "set up the new airport base station. I can access the quick screen to create my new network. Put in my info and it says creating this Airport Express to create a network. It's when things go wrong.

  It seems stuck "to search the new network for a long time. Then he said: an unexpected error has occurred, try again. At this point it I run the Setup again, that the error occurs because I'm trying to connect to the EA. I have to reset the AE to get another shot at the implementation of the new network.

  The modem is showing everything is fine. I bought the AE because he said that I could set up through my iPhone. It's very frustrating.

  Normally, the installation on the iPhone and iPad software works well and is in fact more reliable software installation on a Mac, it is therefore possible that you have a faulty AirPort Express... just as I did a few months ago.

  However, if you want to try the installation a few times however, we can do it. We assume that you have verified that you have a good Ethernet cable connecting the modem and the AirPort Express, correct?

  Can you provide the number of brand and model of the modem you are trying to use with the AirPort Express?

• How can I print a list of MAC addresses in the Airport utility?

  Hi-

  In our House, security Wi - Fi is obtained by listing the MAC addresses of machines allowed in our airports.  Make a list of these addresses used to be as simple as make a screenshot of the table in the Airport utility.

  Now, with MacOS 10.11.3 and Airport 6.3.6, the table in the network utility > Timed Access Control... > Wireless Clients no longer mentions the MAC addresses.  You can view them one at a time, but you cannot display them all at once.

  Is there a way - possibly with Terminal commands, or perhaps AppleScript - to display the names of the guests from the airport and MAC addresses in a kind of list?

  -Gil

  Apple has closed all utility of its utility... so now, it's the bare minimum and nothing more.

  You can buy tools of third-party network, inet, fing for your iOS devices and find all attached devices.

  Or you can buy a router to another provider and keep the most convenient airport for WAP than this OK functions.

  You can also export the configuration file... search in a text editor and remove MAC addresses... but there is nothing that even comes close to what decent average routers made nowadays.

• Connected to but the Airport utility does not see the time capsules

  Hi, I have several time capsules.

  I can connect to the web, but the airport utility does not see the time capsules.  I tried to restart the time capsules, router, computer, but I still don't see any of the devices on the network.

  What now?

  Have you tried the airport utility in the iOS version... Download on the App or iTunes store and load... Works better than the Mac version.

  Other than what Mac running what OS do you use?

  This modem you have and how is the installation of TC on the network.

• Where can I find the Airport extreme N model number?

  Where can I find the Airport extreme N model number?

  It seems that the 3, 4, 5 are all Ns.

  I wish that my laptop wireless backup. A friend has his 5 AE do this via the usb port that is connected to a powered hub.

  Thanks for any advice.

  ett2 wrote:

  Where can I find the Airport extreme N model number?

  It seems that the 3, 4, 5 are all Ns.

  That's kind of how count you...

  But if your AE running 7.6.4 firmware it is Wireless N...

  A look at the base of the number. It is on the first line of molded rubber or paper label. A1408 is Gen5.

  I wish that my laptop wireless backup. A friend has his 5 AE do this via the usb port that is connected to a powered hub.

  Now for a piece of info you don't want to know.

  http://pondini.org/TM/airport.html

  Apple does not support the time machine is a model AE before last Gen6. A lot of people use it, but it can be unreliable... people have a different experience. Just to note that it is not taken in charge and reliability might be good bad or anywhere between the two... Ask yourself how useful is a backup that is not reliable.

• Cannot set the Airport Extreme to extend the existing network

  Network WiFi of my holiday home is provided by the router from my ISP (Time Warner). I have an Airport Extreme, which used to be configured to provide the WiFi network to another well, and I would use it to extend the existing on the TWC router network.

  I had a lot of trouble to do a factory reset on the Airport Extreme, but I'm sure I managed (by turning on with the pressed reset button) after several attempts. At least the extreme doesn't show signs of the old network, he has provided.

  When I try to set it up in the Airport utility, he wants only to create a new network. If I click on 'Other Options' and select 'Add to an existing network', the next screen is titled "This Airport Extreme will create a network" and prompts to enter a new network name and password. (Specifying the name of the network current generates an error because the network already exists, as I expect for the creation of a new network.)

  Any ideas on how to tweak this Airport Extreme by extending a network?

  TIA,

  Doug

  P.S. I have reviewed plugging extreme in one of the TWC router EtherNet ports and create its own WiFi network (with the advantage of adding support for 5 GHz), but the last time I tried I lost all connectivity; I'm afraid that the ISP network might protect against too broad network, although the glitch may have been a coincidence. If anyone has experience/ideas on this alternative configuration, I might be willing to try again.

  AirPort Extreme would not be able to connect using a wireless connection and to extend the wireless network of the ISP, but if you can connect the AirPort Extreme to the ISP using a permanent router, wired Ethernet cable, then AirPort Extreme could be used to provide broader coverage of wireless in this way signal.

• All of a sudden Outlook Express cannot find the files created by the method of attachment.

  Outlook Express cannot find the newly created files to attach. The files are there in My Documents and Outlook Express can still see all the old files, but each new file for the last month is not seen and cannot be attached. I even typed in the name of the file and it says can not find the file of the same name. I send you the files now through 'Send it' a service online, but complicated to use another program. I checked the 'views' and they seem ok. Help, please!

  It is a long shot, but try it in a new identity.

  File | Identity | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

  How to create and use identities in Outlook Express
  http://support.Microsoft.com/?kbid=209169

  Bruce Hagen ~ MS - MVP [Mail]

• Cannot use windows backup error: 0 x 80070002 the system cannot find the file specified

  Original title: Backup failed, error code but no NVIDIA chipset

  Whenever I try to use the Windows backup utility, I get a failure with the error code 0 x 80070002 and "the system cannot find the specified files" - I found KB976972, which refers to these two messages, and I have all the conditions specified here EXCEPT that I don't have an NVIDIA USB Enhanced Host controller Interface (EHCI) chipset.   I advanced and tried the hotfix download referred to in article, but he wouldn't because he did not to my system.   I don't seem to find any other KB articles that are relevant.   I have a lot of space on the external hard drive that I am backup.    Would appreciate any help.

  Win7 Backup - error. (0 x 80070002) - cannot find the file specified.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/bff71aac-c78e-42bd-A959-116019c93478

  ====================================================================

  Norton Ghost version 15 - has a 30 day trial available
  http://www.Symantec.com/Norton/Ghost
  Media: CDR/RW, DVD + R/RW, Blu - Ray, USB and FireWire® devices (IEEE 1394), Iomega Zip® and Jaz® drives
  (Note: trial does not create a Bootable restore CD you will need to restore the image)
  http://www.Symantec.com/Norton/downloads/trialsoftware/register.jsp?PVID=ghost15
  User Guide: ftp://ftp.symantec.com/public/english_us_canada/products/ghost/15/manuals/ngh_15_user_guide.pdf

  Acronis True Image 2012 - has a fully functional trial version of 30 days available.
  (Note: install Acronis and then create a bootable media restoration/rescue CD before you start creating your first image backup)
  http://www.Acronis.com/homecomputing/products/
  30-day trial: http://www.acronis.com/homecomputing/products/#tryorbuy
  True Image User Guides and documentation:
  http://www.Acronis.com/support/documentation/index.html

  Ghost 15 product review
  http://www.PCWorld.com/reviews/product/384118/review/Norton_Ghost_15.html
  Ghost 15 screenshots:
  http://www.Softpedia.com/get/system/back-up-and-recovery/Symantec-Norton-Ghost.shtml

  Acronis True Image Home 2012 product review:
  http://www.whatsabyte.com/P1/ATI_2012_Review.html
  http://www.allacronis.com/Acronis-True-Image-home-review.php

  Acronis True Image Seagate Edition (drive Assistant)
  http://www.Seagate.com/www/en-us/support/downloads/DiscWizard

  Acronis True Image edition of Western Digital (WD)
  http://support.wdc.com/product/downloaddetail.asp?Swid=119&wdc_lang=en

  Also copy disc to disc with Norton Ghost
  http://Service1.Symantec.com/support/PowerQuest.nsf/docid/2004111701520562?OpenDocument&src=hot&prod=Norton+Ghost&ver=10.0&CSM=no&SEG=HHO

  Free alternatives:
  EASEUS Todo Backup Home V3
  (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
  http://www.TODO-backup.com/products/home/free-backup-software.htm

  Untested alternatives
  Reflect disk imaging:
  http://www.Macrium.com/reflectfree.asp

  Paragon Backup & Recovery Free Edition:
  http://www.Paragon-Software.com/home/DB-Express/download.htm

  J W Stuart: http://www.pagestart.com

• Setup error "the system cannot find the specified file" (hpzprl40.exe)

  Trying to install HP Photosmart c5180 all-in-one using the latest version of the software download at HP and have Windows 7 Asus desktop computer. Receive error install "the system cannot find the specified file" (hpzprl40.exe), and the wizard stops.  Help, please.

  Hi loveisus,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!

• P1102w - cannot find the printer

  Hello

  I'm unable to print using a wireless connection.

  the printer is p1102w.

  operating system is MAC OS 10.10 Yosemite

  Whenever I try to print something I get "printer is not connected / cannot find the printer" message.

  I tried the solutions on your support site, but nothing helped.

  For sure, printer is connected to the same network as the computer. I see it on the print configuration page and I can connect to its IP address via a web browser (but I can't use web services).

  All software and drivers are up to date. Update Apple is nothing new to me. Niether have your site.

  I tried to move the printer closer and further away from router. No results.

  No web proxy is related to my network.

  To make this work, I have to remove the printer from my system, reinstall it using the USB cable, and then add it again via wi - fi.

  But some time the problem reappears.

  It's really frustrating. Help, please.

  Hi @xopot ,

  I see that you have problems printing via wireless network. I would like to help you today.

  Since you can access the printer embedded Web server, the printer would have a valid IP address. Most likely, it has something to do with the software that the printer uses.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  

  

  Configure a static IP address for the printer.

  The printer is not found during Installation wireless.

  Do not take into account the title. Select the Solution 4: assign your printer a static IP address.

  If you need help, let me know.

  Have a great day!
  Thank you.

• "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file

  Hey all,.

  I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?

  Hi tripleb316,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Unable to play the song or burning CDs in windows media player 11 error message: "Windows Media Player cannot find the file.

  Original title: the windows media player 11

  I have the media player 11 and my operating system is XP Home Edition, but for some reason, when I try to play a song or burn it to a CD, this is the error message I get.  Can someone help me with this?

  Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. reason for which each song I ever download from the internet is going to play is no longer...

  Thank you.

  Hi NancyCamper,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Resources for the resolution of problems in Windows Media Player

  http://support.Microsoft.com/kb/843509

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.