Breakpoint - not able to move the block of text at a breakpoint

Similar Questions

• Not able to move the navigation toolbar buttons.

  Buttons toolbar navigation like the previous, next, Reload, Stop, home etc. are spread over the entire toolbar. Earlier, they used to be contributed. Clicking on home or reload as easy that simply takes the pointer to the top left corner of the screen and clicking on the button. Now, I need to really start to hunt for the home or the button reload if I need to use. Please we can club these buttons on the side of the page so that you don't have to look anywhere in the toolbar?

  To avoid interference between the versions, use a profile for Firefox 4.0 beta and you keep the profile for Firefox 3.6. He will probably solve your problem.

  If you want to move the items from the toolbars (buttons, icons), go to the Firefox menu, select the arrow to the right of the Options, then select Toolbars... You can now move the elements of the toolbar or add new items in the window toolbar Customize drag-and - drop. Close the window to customize the toolbar to the elements of the lock.

• Issues sticky not able to move the image

  I use Photoshop CC 2015. OK, I have 6 jpg files I want to put it on 6 different layers in the document I'm working on. I have them in the tabs. I'm going to the first. CTRL A then Ctrl C. I'll then paper work and Ctrl V to paste. He puts it on a new layer in the Center and I want to put on the right of the image. I am unable to move the image I just pasted.

  What happens if something am I hurt? It's frustrating. I already did without problems. I have set up my document incorrectly or what?

  Sorry for the post. I had problems with photoshop without being properly set up. He was missing the tool move my toolbar. I have reset photoshop on its values, and I can do what I need.

  Once again sorry for this post if there is a way to close the positions and then close it.

• Just recently I have not been able to move the folder on my desktop. I have to copy and paste it into a new folder, and then delete the old on.

  Just recently I have not been able to move the folder on my desktop. I save videos to my office then then move in different folders, but now need to copy and paste, then remove the video from office.  Around the same time, when I try to use help I have Windows Help cannot start.  So please HELP.  Using Win7.

  Hello

  1. Did you of recent changes made to your computer that caused the problem?
  2. It happens that the Office? Have you tried with Documents and other readers?

  Step 1: File system [SFC] Checker

  Try to run a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run a virus scan to check if there are infections on the computer:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  Step 3: Follow the instructions in the article to fix the problem of files and folders in Windows:

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  For more information, follow the instructions in the article to improve the performance of Windows 7:

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance

  It will be useful.

• Hi, I am not able to execute the procedure using dblink in PLSql block. Although he works outside the end of the beginning. Please suggest solution

  Hello

  I'm not able to execute the procedure using dblink in PLSql block.

  Although he works outside the end of the beginning.

  Please suggest solution

  Hello

  Thanks everone for your contributions,

  As well as the permissions, I used to run inside the PL sql block, which was not necessary, we can simply call the procedure using dblink.

  Thanks guys,.

• I am not able to adjust the height of a page on my site. I try to move the blue mark on the left side and it does not move. What should I do? Thank you

  I am not able to adjust the height of a page on my site. I try to move the blue mark on the left side and it does not move. What should I do? Thank you

  Hello

  could you please try to find an empty project as rectangle/text box, especially at the lower end of the page. Use Edit-> "Select All" to select all elements on the page, it will be easier to locate.

  Let me know if it works

• VIC SVmotion Plugin not able to move VMDK and leave the rest

  I use ESX 3.5 update 4 with the 1.0.0.0 SVmotion plugin.  I have a virtual machine that has 2 disc two currently on the store of data even zFCP.  I wan to move the second disk (D:\) in the first disc on the zFCP data store and a SATA data and survey the VM store.  I right-click the virtual machine, select storage to migrate, and I emphasize the second disc.  I can drag it to the SATA data store and click on apply.  After a few seconds, I get the error message:

  The requested Storage VMotion would move disks to a virtual machine without affecting the virtual machine, a new home page, but such an approach is not supported on the host source "hostname".

  If I try to move the VM together with the two discs, which works very well, but I only want the second disc.  Is it possible to move one disk of a virtual machine and do not have to move the entire virtual machine?  I thought that the SVmotion point should have the ability to move around VMDK.

  Thank you

  you will need to do this, use the remote CLI.

  First install the VI remote CLI, you can download it from the following locations.  http://www.vmware.com/download/vi/drivers_tools.html.

  Open a command prompt, and then navigate to the bin directory in C:\Program VMware VI remote CLI\.

  Then, run the following command to put the svmotion in interactive mode

  C:\Program Files (x 86) \VMware\VMware VI remote CLI\bin > svmotion.pl - interactive

  It will then ask you to enter your coordinates of VC and once you are connected to the VC, you need to enter the name of your datacenter (case sensitive)

  then it will ask you to enter the location of the vmx

  Enter the path of the data of the virtual machine (for example MyVM/MyVM.vmx store

  then it will ask you to enter the name of the destination database (in your case the SATA data store name)

  then you will be prompted by the following

  you will be prompted with the following message if you VM disks.

  You can also move the disks regardless of the virtual machine.  If you want to stay with the VM disks, then skip this step...

  You would individually place the disks (yes/no)?

  type Yes

  It will now ask you to enter the path of your vmdk, so you must enter the path for the two discs.

  MyVM/MyVM.vmdk

  fibredatastore

  hard MyVM/myvm (2)

  SATA data store

  Have a look here as well if you get stuck.

  http://itgerrish.blogspot.com/search/label/VMware

  Thank you

  Will be

• Is it possible that it might be to move the blocks?

  Issue summary other Windows Live Family Safety questions what version of Windows Live Family Safety are you using? Version 2011 (15.4.3502.922) choose your operating system version: Windows 7 additional details, I use parental controls on my husbands computer to avoid view some sites (it is a recovery * addict) but I noticed that the software is no longer watch the sites he is visiting. I know he was online because we talked through facebook and email (it is currently deployed) and he paid bills online and others. But none of these sites appear on the activity report. How is that possible? Is there a way it could circumvent the blocker and cover his tracks and possibly to move the blocks? I don't understand how this could happen. I'm not positive what parental controls version, I use since it is installed on his laptop and he is a foreigner, I just chose the one that I thought more likely. Not sure if that makes a difference.

  Hi nonamepixie,

  Windows Live Family Safety has limitation. It will not work if the computer is in safe mode. Safe mode disables most of the application when starting, and he was aware of the settings that you have applied in Windows Live Family Safety. This is the reason why you see no activity report in your web filtering.

  I hope this helps with your question.

  Thank you!

• Windows Media Player not able to burn the 80 minutes of audio

  MEDIA PLAYER NOT ABLE TO BURN THE 80 MINUTES OF AUDIO ON CD.

  I want to burn a 77-minute cd in media player and can not.   I add a playlist to the burnlist and Monte total autonomy than 77 minutes.  I use a 80 minute cd.  Media player automatically moves the last two songs on my playlist of 77 minutes and registered the disk "next".  I want to record the 77 minutes of music on a single cd.  Any suggestions?

  flustrated1, you use Windows Media Player to burn a CD, and if so, what is your WMP version? Where exactly did you select CD burning without gaps ? As far as I know, only WMP 12 supports CD burning. Tim Baets
  http://www.BM-productions.TK

• MBR is corrupted, not able to repair the MBR and get error code 0 x 490

  Original title: MBR is corrupted

  MBR is corrupt repair action: repair disk metadata - result: failed - error code = 0 x 490

  Hello

  According to the description, I understand that you are not able to repair the Master Boot Record (MBR) and getting the error is 0 x 490.

  I suggest that you want to run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1: Execution of restarting the Windows recovery environment (WinRE)

  To run the repair to start the Windows recovery environment (WinRE), follow these steps:

  1. Insert the Windows installation disc in the disc drive, and then start the computer.

  2. When the message press any key to start from the CD or DVD is displayed, press a key.
     If your PC does not automatically detect the media

  • When the computer reboots, read on screen for instructions that explain how to interrupt normal startup and access the basic input/output system (BIOS) configuration utility. Most PCs use the F2, F10, ESC or del key to start the configuration of the BIOS.

  • Looking for a tab in the BIOS configuration utility that is labeled boot order, The Options of Bootor Boot. By following the instructions on the screen, use the arrow keys to go to the boot order, and then press ENTER.

  • Locate the flash USB, DVD or CD player (this could be called removable device) in the startup list. By following the instructions on the screen, use the arrow keys to move the drive to the top so that it appears first in the startup list. Press ENTER. The startup command sequence is now changed to boot from the flash drive, CD, DVD, or USB.

  • Press F10 to save your changes and exit the BIOS Setup utility. Select Yes in the confirmation window. The PC will restart.

  1. Select a language, a time and a currency, a keyboard or input method, and then click Next.

  2. Click on repair your computer.

  3. In the System Recovery Options dialog box, select the drive of your Windows installation, and then click Next.

  4. In the System Recovery Options dialog box, click on repair your computer.

  5. Click the operating system you want to repair, and then click Next.

  In the System Recovery Options dialog box, click Startup Repair.

  For more information about System Recovery Options, see What are the system recovery options in Windows?

  For more information about the Startup Repair, see Startup Repair: frequently asked questions.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files): https://www.Microsoft.com/en-us/software-download/Windows7?WA=wsignin1.0

  Method 2

  If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start the recovery Windows (WINRE) environment . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.

• Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

• Click repair your computer.

• Click the operating system you want to repair, and then click Next.

• In the System Recovery Options dialog box, click command prompt.

Type Bootrec.exe, and then press ENTER.

See the following link for more information:

How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

http://support.Microsoft.com/kb/927392

Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

• Not able to check the upgrade - Windows 8

  Original title: updates

  A blue bar keeps coming back, it says: Windows needs your help: so he said windows update was not able to verify the new updates for the last 30 days. Go to windows update to fix the problem. I tried all the ideals? This bar keeps coming back every 15 seconds, I'm going to windows updates and it does not update.

  Hi Michael,

  Thanks for posting your query in Microsoft Community.

  I understand that you receive a blue bar to go the Windows updates to check for updates and install to keep the computer up-to-date, but it fails. I'll be happy to answer your query. Let me ask you;

  • What security software is installed on the computer?
  • Using proxy connection?

  This may be due to reasons various, such as the files required by Windows update is missing or damaged, connection proxy security, software, etc. Let's try the following methods and check the status.

  Method 1: Run the Windows Update troubleshooting tool

  1. Open the Windows Update troubleshooting tool by hitting swipe in the edge right of the screen, tap Search (or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking Search), entering the Troubleshooting in the search box, by typing or clicking on settings then tapping or clicking on the resolution of the problems. Under system and security, tap or click fix problems with Windows Update.

  2. Run the troubleshooter, and then open Windows Update and try installing the update again.

  Method 2: Turn off the proxy connection

  Press Windows key + R, type inetcpl.cpl , and then press OK

  Click on the connections tab, and then click LAN settings

  Uncheck the option use a proxy server for your LAN

  Click OK

  Method 3: Disable security software

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Method 4: Run the DISM tool

  1. Enter in the right edge of the screen and then click on Search.
     (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)

  2. Enter command prompt in the search box.

  3. In the results list, drag down on or right click command prompt, and then press or click run as administrator.

  4. In the administrator: command prompt window, type the following commands. Press ENTER after each command:

     DISM.exe / Online/Cleanup-image /Scanhealth

     DISM.exe / Online/Cleanup-image /Restorehealth

  5. To close the administrator: command prompt window, type Exitand press ENTER.

  6. Run Windows Update again.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Not able to install the application, asking family SMEs of installation

  Original title: iam not able to install the app it ask family SMEs of installation

  IAM able to install apps it ask some family configuration

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I would like to know;

  1. What you are trying to install applications?
  2. You are the administrator of your computer?

  You can set up a family safety account or you may be referred by the primary user. For the children of family security controlled, if game Restrictions are lit, depending on the setting you have (lower than 10, teen, mature etc), your child will be able to download applications that meet the coast.

  Here's what I suggest, if you wish to:

  1. Go to https://familysafety.microsoft.com and login as parent
  2. Check the setting of the game.

  You can do two things

  • Put out of the game restrictions or
  • Change the restriction of adult game

  Once your child has downloaded the application, parent go back to the family site, turn on the Restriction of game or set the game side to one appropriate for your child.

  For more information:

  Use security for the family with the Windows store

  Also, in the list of game for your childs account, make sure that the app is in the whitelist if your username already has but gets blocked by parental control due to permissions issue.

  Let us know if you need more assistance. We will be happy to help you.

  ________________

  Thank you best regards &,.

  Isha Soni

• I'm not able to use the export to ftp in Muse. When I enter my host, the name and the password, I get a long interlude of the Rainbow wheel, and finally, the message that my host ftp can not be found. I checked the name and it is port 21. Can I export a H

  I'm not able to use the export to ftp in Muse. When I enter my host, the name and the password, I get a long interlude of the Rainbow wheel, and finally, the message that my host ftp can not be found. I checked the name and it is port 21. I can export to HTML and use another ftp client to download (on the same server), but it's tedious and minor changes is painful. Have you come across this and found a solution?

  Yes I have - thanks for thinking.

  Starting to think that it is a computer / connection problem. I had to move the machines to connect to the Adobe forum.   Plu MacBook thin. New macbook dead ends. These seem too coincidental independent.

  Susan

• not able to pass the table name as parameter in the function

  Hello
  
  I am not able to move from tablename as parameter. I use the below function.
  -------------------------------------------------------------------------------------------------
  
  function count_test (tabname varchar2) return number is
  l_count number;
  Start
  
  Select count (*) IN the tabname FROM l_count;
  
  RETURN l_count;
  END;

  You can not do with static SQL.

  The only way is to do it with dynamic SQL:

  EXECUTE IMMEDIATE ' select count (*) FROM ' | tabname INTO l_count;

  Kind regards.
  Al

  Published by: Alberto Faenza 10 may 2012 01:44
  Misspelling

• Not able to specify the location of file

  Dear all
  
  I use PCM 13.1 and we are not able to specify the path to the file by using the PCM admin login page, when I open in the browser and that goes to content management and click on the name of the project, and then Add specifies the location of the folder, I can put the name of the location but when I try to insert in the location of the file that I can't type or the pop-up window does not come to specify the location of the path I checked IE and other browsers but same effect, I also PCM site added to trusted sites and must change is low security, disable all POP-UP blocker. but no results, someone has an idea
  I thank in advance

  I had the same problem, it is with Java JRE installed on the machine.
  I uninstalled Java and installed Version 6 Update 26 and it worked fine