Issues sticky not able to move the image

Similar Questions

• Not able to see the images in the Windows Vista Help file

  I use a Windows Vista operating system and I'm not able to view the images in the Windows Vista Help file... ! Here are the troubleshooting steps I tried to solve the problem:-

  1. I tried sfc/scannow and chkdski/f/r.
  2. Tried to clean boot.
  3. Tried to create a new user account.
  4. Tried in safe mode.
  5. Downloaded and installed the WinHlp32.exe file from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5143
  6. Tried running the http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx SubinACL tool
  7. I tried Startup Repair tool.

  Could you please temme then what to do? I look forward to hearing from you soon.

  Hello
  Try this for this issue:
  Equip your Windows recovery disk, then select "Reinstall partial '.»
  Check the "Winhelp" since the consolidation of program.
  Next
  Finishing
  Then restart.
  Which solves the problem?
  hope this helps,
  b Eddie

• How to open GROSS of DSC_RX100M3 images?  I downloaded Adobe DNG converter 8.4, but not able to convert the images?

  How to open GROSS of DSC_RX100M3 images?  I downloaded Adobe DNG converter 8.4, but not able to convert the images?

  Minor correction to what SSprengel wrote...

  The RX100M3 is supported only by version 8.5.  Looks like you need a newer version.

  Using Photoshop | Digital Negative (DNG)

  

  -Christmas

• Breakpoint - not able to move the block of text at a breakpoint

  Adobe 2015.1.0.2309 Muse.

  I have a few breakpoints set on my page. When I jump to one of them my expectation is that I'll be able to format the page for this breakpoint.

  I want to move a block of text right of a picture to a picture below when I get to a certain page width. If I click on the breakpoint for the width of the page, but when I hover over the text block I have an icon that says 'Click to go straight at the stop'. When I rubbed it in my larger page break.

  Starting point:

  

  I want to move the text under the image block when I'm about to stop 750, so I post the width of the page at 750. However when I place the mouse on the text block I just get the message "click to go directly at the breakpoint.

  

  If I click on the Muse goes back to as in the first photo.

  How can I actually select me the text block, so I can re - position?

  Hello

  Screen captures, it seems that you have created the breakpoints on the master page. Master page breakpoints do not automatically carry over ordinary pages; You must explicitly create (click on the white triangle on the breakpoint bar to go to the location of the main breakpoint and then click on the button '+'). Once you have a breakpoint on the regular page, you will be able to replace the text block as you wish.

  I hope this helps.

  Abhishek

• JDE 4.2.1 - not able to capture the image

  Hello

  I use to take a photo and upload it.

  According to Manager.getSupportedContentTypes ("capture"), the only Audio recording is supported if there is no camera in the Simulator (8100).

  And the code depending on survey - type encoding not supported registration

  Please help me capture the image

  try {
                          player = Manager.createPlayer("capture://video?encoding=jpeg&width=1024&height=768");
                          player.realize();
                          VideoControl _videoControl = (VideoControl) player.getControl("VideoControl");
                          if (_videoControl != null) {
                              Field _videoField = (Field) _videoControl.initDisplayMode(VideoControl.USE_GUI_PRIMITIVE,"net.rim.device.api.ui.Field");
                              _videoControl.setVisible(true);
                          }
                          player.start();
  } catch (Exception e) {
                                System.out.println("ERROR IOException" + e.getClass() + ":" + e.getMessage());
  }
  

  Thank you

  Real jsr135 support has been added in 4.6 I think.

  Before that, you need to start the native camera app and use it for taking pictures.

• Not able to view the images in the CompactFlash card.

  Original title: "Scan and difficulty of...» "on external flash hidden all files

  I have a 2 GB CompactFlash card in my digital SLR that when I plugged my PC gave me the message, "analyze and difficult external drive...". "I foolishly chose the option"Recommended", now all 439 MB of images is not visible.  Empty the DCIM folder, where the images are usually stored.  If I do a properties of the disc, it shows 439 MB used space and 1.4 GB of free space.  I've never had a problem before displaying my images, what happened?  I ran Pandora Recovery on the drive, but it can't find some files that had been deleted off months ago the unit.

  Is there a way to recover files that are obviously there, but not displayed?

  OK, updated...  I inserted the card memory flash on a XP Pro machine and under properties > tools > error checking, I chose "Automatically fix file system errors" and now I have a folder called "Found.000" containing all the missing files, however they are all named "FILExxx.CHK", where "xxx" is a sequential number.  Then I was on them batch file renaming to .jpg and I have my pictures back.  All 356 of them...

  Thanks Microsoft for scaring the heck out of me, what is the problem with the 'Scan and Fix '?  It seems that I'm not the only person who has experienced this problem before with Windows 7...

• not able to view the image in the column of table advace

  Hi all
  I try to display the deleteicon_enabled image in the column of table in advance. I created an item of type link under a column of table in advance. And I created another element of type under the link image. And gave values of property element in the image as follows:
  
  Image URI:D:/Oracle/OAF_JDev/jdevhome/jdev/myhtml/OA_MEDIA/deleteicon_enabled.gif.
  
  In the output I does not display the image.
  
  Am I missing something?
  
  Thank you
  Sunny

  You can try affecting just "deleteicon_enabled.gif" compared to the entire URI of the Image path?

  Kind regards
  LC

• Not able to move the navigation toolbar buttons.

  Buttons toolbar navigation like the previous, next, Reload, Stop, home etc. are spread over the entire toolbar. Earlier, they used to be contributed. Clicking on home or reload as easy that simply takes the pointer to the top left corner of the screen and clicking on the button. Now, I need to really start to hunt for the home or the button reload if I need to use. Please we can club these buttons on the side of the page so that you don't have to look anywhere in the toolbar?

  To avoid interference between the versions, use a profile for Firefox 4.0 beta and you keep the profile for Firefox 3.6. He will probably solve your problem.

  If you want to move the items from the toolbars (buttons, icons), go to the Firefox menu, select the arrow to the right of the Options, then select Toolbars... You can now move the elements of the toolbar or add new items in the window toolbar Customize drag-and - drop. Close the window to customize the toolbar to the elements of the lock.

• Not able to access the images on USB

  where are my pictures?

  I transferred photos from pc to flshdrive and place on the second pc and then deleted out of flash player. I went to retrieve photos in the Gallery on the first pc and they are no longer there. I guess that when I transferred to flash drive, I made a mistake in copying and instead hit ' send to '. I deleted the photos of the key before realizing that, once I've uploaded the second series of photos via and copied to a folder, the initial batch of photos disappeared. Almost as if, the second value copied on them? Is it still possible? Or sense? However, they are more on the first pc in place recycling bins, etc.. Help?

  Perhaps the following freeware can recover photos
  Since the flash player:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Recuva - file recovery
  http://www.Piriform.com/Recuva

  Introduction of Recuva (tutorials)
  http://www.Piriform.com/docs/Recuva/introducing-Recuva

• Just recently I have not been able to move the folder on my desktop. I have to copy and paste it into a new folder, and then delete the old on.

  Just recently I have not been able to move the folder on my desktop. I save videos to my office then then move in different folders, but now need to copy and paste, then remove the video from office.  Around the same time, when I try to use help I have Windows Help cannot start.  So please HELP.  Using Win7.

  Hello

  1. Did you of recent changes made to your computer that caused the problem?
  2. It happens that the Office? Have you tried with Documents and other readers?

  Step 1: File system [SFC] Checker

  Try to run a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run a virus scan to check if there are infections on the computer:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  Step 3: Follow the instructions in the article to fix the problem of files and folders in Windows:

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  For more information, follow the instructions in the article to improve the performance of Windows 7:

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance

  It will be useful.

• I have Photoshop Lightroom 5 and you have downloaded Camera Raw 8.7.1 & DNG Converter with success. I have a new model of Sony Alpha 7 11 ILÇE A7M2 which is supported by LR5. I'm still not able to see the RAW images. The message says not available ove

  I have Photoshop Lightroom 5 and you have downloaded Camera Raw 8.7.1 & DNG Converter with success. I have a new model of Sony Alpha 7 11 ILÇE A7M2 which is supported by LR5. I'm still not able to see the RAW images. The preview not available for this DSC - ARW file message says. Whatelse should I do to see my photos? Can anyone help?

  Anita

  Support for the camera has been added in the latest version of Lightroom, version 5.7.1. After you download Camera Raw 8.7.1 will have no effect on Lightroom because Lightroom does not use plug in Camera Raw. You must ensure that you have updated Lightroom to the latest version in order to have support for this camera.

• I am not able to adjust the height of a page on my site. I try to move the blue mark on the left side and it does not move. What should I do? Thank you

  I am not able to adjust the height of a page on my site. I try to move the blue mark on the left side and it does not move. What should I do? Thank you

  Hello

  could you please try to find an empty project as rectangle/text box, especially at the lower end of the page. Use Edit-> "Select All" to select all elements on the page, it will be easier to locate.

  Let me know if it works

• Am not able to resize the fonts, images, or anything that is related to the use of numbers.  How can this be corrected?

  Am not able to resize the fonts, images, or anything that is related to the use of numbers.  How can this be corrected?

  Hello

  Is this a problem of input in any number?

  All applications (such as Notepad) do have the same problem?

  Is your Num Lock?

  Brian

• So frustrated... have CS5 and whenever I try to use the clone stamp, it just does not move picture.  I click on duplicate, move the image to press option and the minute I move stamp image, it starts moving around image as if there are two pictures the

  Frustrated by the clone in CS5 stamp.  Whenever I go to the for use, it just moves the image as if I had multiple layers.  Is anyone out there can help with this?

  Check the palette Source of duplication for options that you forgot which allows...

• VIC SVmotion Plugin not able to move VMDK and leave the rest

  I use ESX 3.5 update 4 with the 1.0.0.0 SVmotion plugin.  I have a virtual machine that has 2 disc two currently on the store of data even zFCP.  I wan to move the second disk (D:\) in the first disc on the zFCP data store and a SATA data and survey the VM store.  I right-click the virtual machine, select storage to migrate, and I emphasize the second disc.  I can drag it to the SATA data store and click on apply.  After a few seconds, I get the error message:

  The requested Storage VMotion would move disks to a virtual machine without affecting the virtual machine, a new home page, but such an approach is not supported on the host source "hostname".

  If I try to move the VM together with the two discs, which works very well, but I only want the second disc.  Is it possible to move one disk of a virtual machine and do not have to move the entire virtual machine?  I thought that the SVmotion point should have the ability to move around VMDK.

  Thank you

  you will need to do this, use the remote CLI.

  First install the VI remote CLI, you can download it from the following locations.  http://www.vmware.com/download/vi/drivers_tools.html.

  Open a command prompt, and then navigate to the bin directory in C:\Program VMware VI remote CLI\.

  Then, run the following command to put the svmotion in interactive mode

  C:\Program Files (x 86) \VMware\VMware VI remote CLI\bin > svmotion.pl - interactive

  It will then ask you to enter your coordinates of VC and once you are connected to the VC, you need to enter the name of your datacenter (case sensitive)

  then it will ask you to enter the location of the vmx

  Enter the path of the data of the virtual machine (for example MyVM/MyVM.vmx store

  then it will ask you to enter the name of the destination database (in your case the SATA data store name)

  then you will be prompted by the following

  you will be prompted with the following message if you VM disks.

  You can also move the disks regardless of the virtual machine.  If you want to stay with the VM disks, then skip this step...

  You would individually place the disks (yes/no)?

  type Yes

  It will now ask you to enter the path of your vmdk, so you must enter the path for the two discs.

  MyVM/MyVM.vmdk

  fibredatastore

  hard MyVM/myvm (2)

  SATA data store

  Have a look here as well if you get stuck.

  http://itgerrish.blogspot.com/search/label/VMware

  Thank you

  Will be