Bridge and PS refuses to work constantly

Similar Questions

• a sentence installed updated software, "OSx recovery software update" and the overview application still refuses to work however I try to launch it. He started and left immediately after recovery immediately, she leaves, she shows also a no document error

  I just installed new updates of software, "OSx recovery software update" and the Preview app still refuses to work, however I try to launch it. He launched and immediately closed unexpectedly after unexpectedly WARNING recovery he immediately left again, it also shows a notice of error document

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Sound fluctuate constantly, jumps and mute don't work

  original title: noise fluctuates constantly and mute does not work, there is also a quick jump in time.  ???

  Sound fluctuates constantly and the mute won't work, there is also a quick jump sometimes... it is his property. ???

    

  Hello

  1. What is the brand and model of the computer?

  2. when exactly this question produce?

  3. don't you make changes to the computer until the problem occurred?

  4. what operating system is installed on the computer?

  I suggest you try the steps from the link below and check if it helps.

  For Windows 7: Open the Audio playback problems troubleshooting: http://windows.microsoft.com/en-US/windows7/Open-the-Playing-Audio-troubleshooter

  For Windows Vista: Tips for solving common audio problems: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-sound-problems

  For Windows XP: How to troubleshoot sound problems in Windows XP: http://support.microsoft.com/kb/307918/en-gb

  Hope this information is useful.

• My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly.

  My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly. Does every 5 to 10 minutes and it gets frustrating. It is not the cable modem because it is constantly connected, and I repeatedly checked.
  I have this problem with all programs on the internet and she does every day and probably every 5 to 10 minutes.

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• HI - bought a kit of the student.    And for a while creative cloud consulted well.   But now - my access does not work, and he goes to the members section (which I already have).  Also - although I'm going to download bridge and illustrator, I could

  HI - bought a kit of the student.    And for a while creative cloud consulted well.   But now - my access does not work, and he goes to the members section (which I already have).  Also - although I'm going to download bridge and illustrator, I could never get to download Photoshop.

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How can I uninstall the programs of the

  Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How do I uninstall the programs of the broken laptop and not running before installing on a new? Sincere friendships Fabian

  Hello

  If you have access to the machine, turn off Adobe CC applications by the signature of the application.

  Please see connect and disconnect to activate Cloud Creative applications

  Kind regards

  Sheena

• Download App refuses to work

  No matter how much I try and do Cloud Creative refuses to load my apps.

  I downloaded the latest version, I've updated my flash drive, I cleaned the files in my data file of the App, I reinstalled this number INCALCULABLE of TIMES and every time I try and run it, I have always with the same stupid 'DOWNLOAD ERROR Please contact customer support.' with a button that tells me to download Creative cloud.

  In recent weeks since I downloaded creative cloud, he constantly encouraged me to "Get Creative cloud" and refuses to work until I do it.

  I need these programs for my classes in College and can't afford to pay for every single one, I am frustrated and close to TEARS. I don't know what I have to do for that this stupid thing to work. Can someone please give me the REAL solution for this? PLEASE?

  I realized what happened. By sheer luck, I've downloaded again the Application Manager and place it in the Adobe folder. AAMUpdater did the rest. I deleted it and the OOBE folder and restarted creative cloud and now its working again. I'll cry im so happy. Thanks for trying to help me. c:

• The default program for .ai files is Bridge and Windows won't let me change it.

  My computer refuses to associate with Illustrator .ai files. On the contrary, she associated bridge.  Even when you right-click on a file and go to "open with...". "Illustrator is not an option.  It is especially annoying because I like to work with objects smart AI in the PS and when I go to edit a smart object, my computer tries to open it in Bridge (then what's happening, it's the folder Temp opens in Bridge and I have to hang out in Illustrator to edit.)  It is a huge obstacle to productivity, and I'd like to get this resolved.  Here are some pictures of what happens when I try to edit it in Windows.  First of all, you will see that illustrator is not a recommended as default of AI program.

  

  And when I go to browse and select Illustrator CC 64 - bit, it brings back me to the dialog box 'Open with' above as if I had not done something.

  

  Thanks for any help that anyone can provide.

  Hi guys

  I found the solution to your problem.

  The problem is that Illustrator CS6 and CC is using the same name 'Illustrator' so when you go for example CC folder and choose windows illustrator.exe already sees Illustrator was added and just jump back to the same screen.

  If you look in the folder C:\Program Files\Adobe\Adobe Illustrator CS6 \Support Files\Contents\Windows (64-bit), you will see the name of the file (illustrator.exe)

  If you look in the folder C:\Program Files\Adobe\Adobe Illustrator CC (64 Bit) \Support Files\Contents\Windows you will see the name of the file (illustrator.exe)

  If you change the file illustrator.exe for CS6 or CC for example IllustratorCC.exe for the record CC

  Change the names of these for example

  If you look in the folder C:\Program Files\Adobe\Adobe Illustrator CS6 \Support Files\Contents\Windows (64-bit), you will see the name of the file (illustratorCS6.exe)

  If you look in the folder C:\Program Files\Adobe\Adobe Illustrator CC (64 Bit) \Support Files\Contents\Windows you will see the name of the file (illustratorCC.exe)

  Then, you will be able to add them to the list of associated files.

  You can do this for all applications from Photoshop, first, AE, etc, are all the same

  Hope this helps

  Thank you

  Jason

• Some USB flash drives REFUSE to work in this 40TL963B

  Hi all. I recently bought a new 40TL963B and so far I have found nothing wrong with her.

  Except that... when I listen to it all the Satellite channels, I noticed thay were very different from my FreeSat box. Duplicate the layers, randomly arrested... etc. It made me want to not use the built-in satellite feature.

  However, I found a program called ToshibaEdit which allowed me to manually change all the digital channels on the TV. Grand... I though. Until I met this problem-->

  Inorder to change the ads, you must copy the TV channels on a USB flash drive, you can edit them on your PC. Now, it took me AN HOUR to do, because of two flash readers I used, none of them worked... I kept getting a "Write Fail" error. WTF?

  The disks are formatted in FAT32, one is a 8 GB is 2 GB.

  Finally, I tried an external 2.5 "USB 120 GB hard drive. Even if the disc is defective... This WORKER. I expect flash drives to work, to be honest, but all of them... the external USB hard drive worked.

  In any case, I spent another hour sort channels, until I was ready to transfer the data back. And. Yes... the same problem. This time, I received an error "failed to read". Again, tried the external USB HDD... worked the first time.

  Now, this HARD drive is faulty, so he'll be thrown... so I'm going to need a flash player to do it again if something happens.

  And then... can ANYONE tell me why on Earth two appropriate, fully working almost brand new USB flash drives REFUSE to work in this TV, but a former, fairly well defective USB external drive MADE? In addition, the same flash drive that I tried to copy the data from digital channel with was also used for a backup of the Firmware... and it WORKED perfectly. It works also for use with the media player.

  While this TV has a hatred of Flash drives all of a sudden?
  Anyone can shed some light on this?

  In addition, very quickly, TV seems to lose its TV settings every time that I bring the TV out of Eve. I'm going to the TV Dynamic and adjust all the settings, but he returned to AutoView and all settings back to 0. Is it a fault or is there something I need to do to 'save' the settings per channel?

  Any help at all will be appreciated greatly.

  Hello

  > And then... can ANYONE tell me why on Earth two appropriate, fully working almost brand new USB flash drives REFUSE to work in this TV, but a former, fairly well defective USB external drive MADE?

  AFAIK the 40TL963B TV supports a common HS USB 2.0 interface and memory flash can be formatted in FAT16 or FAT32 file system. So there is no specific requirement for USB flash memory

• Satellite Pro A60 refuses to work

  Hello

  I have an A60 which is about 2.5 years old and who now refuses to work. When turning on it no more lights at all, it lights up then stops immediately after a few seconds or it is power up but makes a sound of your awful fort and does nothing else, but then sometimes it tension and work for a little while then freezes or stops. Sometimes the only way to get it to the top is to press the button several times, each time after he stopped after 2 seconds, sometimes it becomes work, other times he doesn't know.

  Anyone has an idea please what could be the problem and if it is likely to be repairable and if so is it really useful? I can't seem to get an answer from someone locally and the only option seems to be to send her away which will cost a packet, so the question is useful.

  Thank you very much.

  Melanie

  Hi Melanie

  First of all, you should try whether it s a software or hardware failure.
  Everything looks like a hardware problem, but you should first try to reinstall the operating system on your laptop. Check if the laptop is able to boot from the recovery CD Toshiba.

  If the laptop automatically stops and I presume that the overheating is causing these disorders. It looks like you're a newbie and have no much experience.
  Therefore, you should ask someone with more computer experience for the help.

  I think that a technician will check the cooling modules and will first clean the laptop. Possible, it will add new thermal paste to the CPU and cooling modules. Possibly the memory and the HARD drive must be verified.

• Standard PCI to PCI Bridge and Standard PCI Enhanced Host Controller does not properly

  My AVG Pro tells me that I currently have two problems that can affect the graphics and/or the speed of my computer.

  (1) PCI Standard PCI bridge to PCI does not work

  (2) standard Enhanced PCI to USB Host Controller device is not working properly

  I tried the opportunity to search for a driver that is updated with each problem and achieve the same result for the two problems, that "I have the most recent drivers available. I also tried to uninstall each problem the appliance but they keep reappearing.

  These two elements to appear more than once, but each item shows an instance with an exclamation mark.

  I need to know if it's a hardware problem, that I need to replace the hardware.  Thanks in advance!

  The two problems are related to the software/driver from chipset MB... Go to web youre pc hardware (intel, amd, etc.)

  Locate & download the latest version of the chipset software... If intel, go to intel.com/support/software,drivers

  Look for the update utility from intel, it will scan & offer updates of any pc processor intel... Or find the manual in

  downloads/chipset Intel software Run: Msinfo32 in the run to see the details of the pc hardware

• OEM Windows XP - can I move it to a new PC? And MSE refuses to turn on real-time protection

  I have been using my Windows XP for 8-9 years now (since 2004) and I am looking for an upgrade of the unit, because the specifications of my mobile phone exceeds my computer and it cannot manage tasks effectively.

  I'll be able to transfer my current operating system on the new computer? The old computer is no longer to be used. I have all the original documentation for the computer (However, the license key is on the back of the CPU). I have read conflicting answers online saying that how it is against the EULA and others say that a phone call to Microsoft to check that she would work.

  I do not have an upgrade of the OS, since my external 500 GB hard drive only reads on my Windows XP (I tried on a Windows Vista, Windows 7 and computer Developer Preview, all told, it has been altered) and all my programs are installed on the external hard drive. If an upgrade of the OS is necessary, it would be nice to have a tool to repair my 'corrupt' hard disk restore compatibility with other computers.

  * EDIT, this information can be shaped *.
  The computer is stuck on the screen of the BIOS for a little more than 30 minutes if the manufacturer's mouse is not connected. The mouse does not work also.
  In respect to the keyboard manufacturer (PSP connector) which is lacking after a quantity of time and requires Numlock/Capslock be pressed to the screen to reactivate. Every button I press while he was free is then made a leap to the computer.
  I now use a PSP Converter USB for keyboard port, which now feeds my usb speakers. I also now use a combo of keyboard and mouse Microsoft Wireless 600.

  ___

  MSE also recently decided to pack and to no longer offer protection in real time from the computer. I tried to solve this problem myself for the month and the program still refuses to turn on protection in real time, even after a reinstall. Here is a SS of the error code.
  

  OEM licenses are "linked to the hip" to first on what computer it is installed.  When this computer dies or consider you otherwise out of service, the license dies with him.  Each OEM manufacturer provided a method to ensure that a transfer will not happen.  You cannot transfer it to a new computer.  To install Windows XP on a new computer, at a minimum, you will need to get a retail license for Windows XP (which are no longer available on the market).  In addition, you may find that your new machine contains chips day and components that were never supported by the drivers Windows XP - XP so maybe never run on your computer up to date.

  Programs need to be reinstalled.  You cannot simply connect an external hard drive with programs installed on another machine and expect it to work.  The system registry is suitable for the material on a specific computer and its applications installed and cannot simply be moved to a computer containing a different material.

  Your choice of only reasonable upgrade is to buy a new computer with an operating system that supports it and re - install your applications.  Your external drive * should * work on XP via the last Windows OS.  Try to perform an operation of "chkdsk/r" on your hard drive to make sure it is not damaged.  If it still does not respond, and then save the data elsewhere, reformat the disk on a Windows 7 computer and then put the data on the disk.

  "How to Perform Disk error in Windows XP check"

  <>http://support.Microsoft.com/kb/315265/en-us >

  HTH,

  JW

• Why stop and start my videos online constantly?

  Why stop and start my videos online constantly? I try to watch something and she leaves and I get the "loading" symbol but it works only for a few seconds and then shuts down to 'load' again!

  Hello

  I suggest you to uninstall and reinstall Adobe Flash Player on your
  computer and check if it makes a difference.

  Refer to this article for help:
  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Download the latest version of Flash Player from this link:
  http://www.Adobe.com/support/flashplayer/downloads.html

• My .exe files are not open as they should after a virus removal and some do not work right.

  Here's the problem. I did a scan for viruses with AVG and deleted viruses from my computer. One of those annoying virus seems to be a program called Vista Antivirus that I had never downloaded or installed. I had a feeling that it was not good when she appeared all first. After that AVG has found to be a threat, he removed. This is where the problems started.

  After the removal of Antivirus Vista, my programs refuse to open without a right click and run as administrator. In some cases, like my WMP, the music and the Zune program, they do not work properly. Whenever I try to open a song in WMP or Zune, it won't play them or videos. Instead, as with all other programs, the 'Open with' window as if it does not recognise .exe files. So now you can see my aggravation.

  There is one more problem. After that I restart and login to my account and open the Task Manager to close unnecessary programs that I don't need or want to open, there are usually a whole list of them. However, as I did this virus removal, only a few main Basic programs that are needed to power the computer are open. Since most of those who opened before were .exe files, I can see where is the problem.

  Honestly, I'm stuck for what to do to solve this problem. I'll do a system restore and see if it works (and I hope it will be). If this isn't the case, I need little help and instructions to fix this annoying problem.

  Thank you for taking the time to read this and help out me.

  -iggy

  Edit: System Restore has been a success. Is there anyway I can stop this from happening in the future?

  Hi ignite444,

  Glad to hear that the problem is solved!

  Unwanted programs or virus downloaded on the computer without the user's knowledge.

  Important Antivirus software must be updated regularly to stay effective against new viruses. Most of the antivirus software are designed to update automatically, but you can also update your software manually.
  You should also keep during the virus scan regularly.

  Update your anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-your-antivirus-software

  check the link below for the number of Windows vista-compatible antivirus software.
  Windows Vista consumer security software providers
  http://www.Microsoft.com/Windows/antivirus-partners/Windows-Vista.aspx

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• reports on the problems and solutions has stopped working message all the time

  I can't access the control panel reports of problems and solutions and constantly get one - problem reports and solutions has stopped working, message on the screen.

  How can I disable or fix this problem.

  Hi NickMeyer,

  1. have you made a recent software or hardware changes to the system?

  You can check if there is information in Event Viewer which may help us to solve the problem:

  What are the information contained in the logs of the event (Event Viewer)?

  You can also temporarily disable the security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.