Bridge - Input.vi continues with multiscale of information
Hello
I have 8 sensors of force load cell and I used example: bridge - Input.vi continues to be able to handle 1 to 8 sensors very well, but it uses the unique setting for all sensors table. I am able to build scale of 8 information
different tables in unique information scaling to be indexed in for loop to feed .vi DAQ Create Channel (I-Force-bridge-Table), but it won't break down the physical channels HAVE individual to feed in the indexed table.
information scaling from 8 different tables.
The physical channel is, for example, cDAQ1Mod1 / ai0:7 or cDAQ1Mod1 / ai0:3; cDAQ1Mod2 / ai0:3 using 2 cards. How can I break them down into table to be indexed in .vi DAQ Create Channel (I-Force-bridge-Table) in the loop for synchronize with information of scale table?
Or you have a better idea without having to break the physical channels?
Thank you.
Hello
You can use several virtual channels created in the same spot. Just use a shift register to keep the old reference tasks and add new channels with the new scaling to the task of old. Like this:
Kind regards
Eric
Tags: NI Hardware
Similar Questions
-
How to replace the internal hard drive and continue with existing Time Machine backups
I have a time Machine airport TB 3 attached to the Ethernet port on my mid-2010 MacBook Pro 7.1. It has a 1 TB internal SSD I want to use Carbon Copy Cloner to a 2 TB OWC drive. The last time I did it, I had to start my Time Machine backups.
Is it possible to find 1 the UUID the new SSD, and 2-implementation to date, some sort of Time Machine (perhaps with TMUTIL) 3 information - should allow continuity with the existing backups?
T hank you
I've not had to do this, but a lot of articles about it.
OS X Yosemite: If you want a new Mac "inherit" your backup history
http://www.creativetechsupport.com/help/it/install/TimeMachine-inherit.html
If you clone a drive, migrating from an old record, etc., these articles should give you an overview. Special attention to the second article on combining a new drive for a TM backup.
-
How can I reset my "authentication required" username and password? The fields are always filled with my old information.
Follow these steps to delete the recorded data (form) in a drop-down list:
- Click on the (empty) input field on the web page to open the drop-down list
- Select an entry in the drop-down list
- Press the DELETE key (on a Mac: shift + delete) to remove it.
- Tools > Options > Security: passwords: "saved passwords" > "show passwords".
You may need to clear cookies from this site, so if you checked a box to remember you.
-
form using the trial version and he continues to repeat the information of a page (either first or last page) to all pages and remove the content that has been entered into.
The fields with the same name will be the same content. You must change the names of the fields.
-
Bridge CC 2015 crashes with mp4 - discovery... .but no solution
Hello everyone,
I noticed that much, including myself, had the problem of the CC bridge crashing when faced with a mp4 file. Tried everything - nothing will do, including technical support.
Now, I've discovered:
I opened my Prev PS (CS5.1) version and it is the bridge attached (4.), open the folder with mp4 files and... NO PROBLEM to THE OLD bridge. NO crashes!
... Then, after that... I closed Bridge CS5/CS5 and reopened bridge CC 2015... now they work as well!
Something in the old bridge needs to be formatted mp4 files anf now are compadible with CC Beidge.
I should mention that the open mp4 files and he played very well when you open directly from Windows Media Player or other players.
He was / IS the only CC bridge that hangs when opening a folder containing a mp4 file!
Can this is for all the information - BUT - someone provide contacts to the Adobe product expert team or other places of forward this
so that they can hopefully fix the problem?
Thank you
I think I solved the problem...
Right click on Adobe Bridge CC in all programs (Start button) > properties > compatibility > check: "Run this program in compatibility mode" > then chose Win 7 If you Win 8. In my case, I have Win 7 64 bit and I put in Win7 in any case.
Now all mp4 files work! After the importation of the camera AND after being returned in Movie Maker or Photoshop for example HD, YouTube, etc)
(I shouldn't say mp4s 'open', because it was not the question. They always open and played Windows Rights. But the bridge crashed when just trying to built the thumbnail for the mp4 - when oprning the folder that contained the mp4.
Looks like everything is good
-
Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy anything on the internet. Clues?
This has happened
A few times a week
Is a few weeks ago
Your UserAgent string in Firefox is totally messed up by another program that you have installed and Barclays does not know you use Firefox 3.6.6 - it is probably similar to IE 6.0 on this site.
http://en.Wikipedia.org/wiki/USER_AGENTtype of topic: config in the URL bar and press ENTER.
If you see the warning, you can confirm that you want to access this page.
Filter = general.useragent.
Preferences are "BOLD", a line at a time, and then select reset, right click
Then restart Firefox -
The procedure of procurement of the game Clash of Clans first two payments $9.99 $4.44 and the second did not gems continued with the developer of the game and they told me to solve this problem continue with Apple iTunes... help solve me this problem and the compensatory jewelry
Double-see your message, my first response to this topic tells you how to contact iTunes Support (we are fellow users): Re: the procurement process of the Clash game Clans the amount was deducted from the iTunes account and do not have t...
-
There is a problem with my payment information and I can't configure any application I want to remove my information from my icloud account payment
There are no withdrawal, must be replaced and released.
-
Generate continuous with no 6229 samples
Hello
I need to generate continuous with or 6629 digital output samples. However it gives error 200303 took place in DAQ Assistant. possible reasons: external sample clock source must be specified for this application. I could not see any output on the oscilloscope.
Could you please tell me what to do to generate? How can I arrange frequency sample accurately clock?
Worm thanks a lot in advance...
Kind regards
ERS
-
the start-up of the pc have to press F1 key to continue with the load upward,
the start-up of the pc have to press the F1 key to continue with the load upward, then when the desktop is in place, the date and time is always set to December 2004. Tried to restore to a point without risk, but it makes no difference.
Sounds like the battery RTC (aka aka backup battery BIOS battery) must be replaced.
On most computers, it's easy and inexpensive (generally, the battery is a CR2032 available in your local corner store).
On other computers, however (including portable computers), the procedure can be a little more difficult and/or the battery may be more expensive and only available online.
What is the make and model (very important - require the label if you have a loptop) from your computer?
-
new installation of XP pro on a Dell Inspiron mini
Xp pro installation went copied files Setup then restarts, rather than continue with an install it starts from the beginning again, laptop is configured to boot from the hd, but does not do that, I reset bios to default and hd settings has been reformatted, the cd for this laptop drive is usb because it has not built in 1... If I try and I remove the usb cd when reboots after copid setup files it told her there is no operating system...any help much appreciated...Hi, Leon,
Always include computer make and model, please. Thank you.
Research in the Bios (reboot and press F1 or F2 depending on your system, check that all usb options are enabled (for example, USB legacy or support for USB 2.0 devices).)
If there is a timeout parameter, set it to Max.
Then, find the boot device priority section
A USB flash drive, which is usually listed as USB - HDD, but may be listed as a removable device, will have a priority very low start.
Rearrange the boot device priority so that the flash drive has a higher priority than the hard drive.
Install Windows XP from USB key
Insert the USB key into the USB port on the computer.
Open the "I386" folder and find the file "Winnt.exe".
Double-click on the "Winnt.exe" to launch a command prompt BACK to an installation of Windows XP.
Type the path of the location of your "I386" folder in the DOS window. For example, if your USB is the letter "D" in your "My Computer" window, type "d:\i386" without the quotes and press the Enter"" key.
Let the installation program copy the Windows XP installation files on your computer.
Restart your computer to a command prompt. The Windows XP Setup will continue automatically.
Follow the on-screen instructions to complete the installation. The program will ask you your Windows XP product key in this process.
http://www.ehow.com/how_6912418_install-Windows-XP-USB-drive.html
Make a bootable memory card or USB key using PEBuilder
http://www.tech-recipes.com/Rx/2583/making_a_usb_drive_or_memory_card_bootable_using_pebuilder/
-
"because of related problems or Internet Explore not able to download your automatic proxy script click ok to continue with standard proxy settings"-this window always appears, then I open the Internet Explorer browser. Also I have to reboot the computer because the internet connection is lost 3 - 4 times per hour. Need good advice how to solve the problem. Thank you!
In Internet Explorer, click on Tools > Internet Options > connections > LAN settings and uncheck all the boxes.
-
When the computer is suspended can continue with downloads?
Dear Microsoft Community: is anyway to continues with download for example huge downloads to feel if the computer is put to sleep? Or all programs can do that? Just afraid my computer overheats with normal the day before or the off the computer screen?
Thanks - any ideas?Overclocking can certainly cause serious overheating. I suggest that avoid you it.
If you are determined to do so, you will need to find a feasible speed that will not damage a problem or add a cooling improved as a liquid chillers and more fans. -
Hi, I've been a user of Club Photo Dollar. I accepted the proposal to continue with 10 dollars a month for 10 photos with this request: AD006115173PT, but still no response. Can help you pls?
Hi Luis
I understand that your initial order for the promotion of CPD Stock has failed and you are looking for re - order.
I'm looking into that for you and will let you know when we have a solution.
Kind regards
Bev
-
Why has Adobe decided to do cloud subscription and not continue with the Collections?
I know that it is hard to predict the future and trends. And I know wanted offer convenience, but it's an inconvenience when you do not offer a time offer without continually having to pay for a product. Yes. Adobe is an exceptional product. But you could potentially lose a good customer because continually have to pay for a product year after year without ever owning. People prefer to invest a lump sum, then ending up paying more in the long term. I just wanted to know why not continue with CS 7, 8, 9. Or if you want clouds. Let a time buy and be able to have available for use without the CD.
You can always buy cs6 (Creative Cloud now includes the features of Creative Suite Master Collection and Design Premium)and a handful of other adobe programs.
Maybe you are looking for
-
All few minutes my service antivirus AVAST reports on this site of malware: URL: http://sso.anbtr.com/domain/local.swarmcast.net Process: Mozilla Firefox/firefox.exe This has happened for more than 48 hours. May this site blocked by Firefox before st
-
Re: Satellite L850-1HP - activation windows 8.1
Hello everyone I received an update yesterday from Microsoft update after the update has been successfully installed, I noticed that my PC account did not work and he says I need to activate windows! My windows 8 has already been activated out of the
-
Can I fix Windows XP Home edition instead of reformatting hard drive?
Hi there, my girlfriends A100 laptop has developed a fault where it gets loading up xp (xp with the blue loading bar loading screen) then back to the option screen giving options such as the safe mode with network, invites order and last known config
-
M1217nfw - How to scan with the page feed
I'm tired of scan one page at a time. Is is possible to scan multiple pages from the feeder to scan? I.m on an operating system Windows 8 using the application "scan to" (don't know what is the name of apps or version. TIA
-
Hello. I read that I can go in gpedit.msc through the command run. I can't get in. He tells me this message: "Windows cannot find 'gpedit.msc'. Make sure you typed the name correctly, etc... » It is the process that a memory patriot employee was told