Bridge of search is not working properly
I just downloaded bridge CC and when using research it is not find anything or it finds only a few files. I have my previous bridge CS 6 there was no problem with that. I uninstalled and reinstalled the program, but it did not help.
Using the Find command, including the "unindexed files", but the process is so slow. But thanks for the tip, I'll remember to use when all else fails.
Tags: Bridge
Similar Questions
-
Windows Desktop Search is not working properly
For some time after 4 days my computer will be slow and does not respond well. If I stop and start again, a box appears saying that desktop search is not working properly and options to stop the computer, reboot and rebuild the index. After that performance improves for a few days. What is the problem? Your help is appreciated.
slberry50,
Thank you for visiting the Microsoft Answers community forum.Looks like the indexing service is not running, or stops for some reason any. We will check the indexing service to see if it is set to automatically run first.
Restart the Windows Search service
Click Start, type services in the start search box and press ENTER.
List programs, click Services.
If you are prompted for an administrator password or for confirmation, type the password, or provide confirmation.
Scroll down and locate the service which is the Windows Search label.
Right-click the service and then click Properties.
Set the startup type: automatic (delayed start).
Click Start to start the service, and then click OK.Rebuild the database that is used by the search indexer
Click Start, the index in the search box and press ENTER.
List programs, click on Indexing Options.
If you are prompted for an administrator password or for confirmation, type the password, or provide confirmation.
Click Advanced.
Click on rebuild and then click OK to the warning that appears.
Click OK to close the Indexing Options.
Note: From now on, the system must re - index documents and electronic mail. However, when indexing is complete, it is likely that the performance of the system will return to acceptable levels.Run a file system check to ensure that no file system is damaged:
To run the System File Checker tool, follow these steps:
Click Start and type cmd in the box start the search.
Right click on cmd in the list programs, and then click Run as administrator.
If you are prompted for an administrator password or a confirmation, type your password or click on continue
At the command prompt, type the following line and press ENTER:
sfc/scannow
When the analysis is complete, test to see if the problem you are experiencing is resolved.If your computer continues to experience bad performance, here are some additional troubleshooting steps:
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Let us know if you need more information.
Thank youGloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows 7 Search is not working properly
I am running Windows 7 Professional (64 bit) with Office 2007. Computer with a CPU Core2Duo with 8 GB of memory.
Windows search does not work properly.
- A search in Word/Excel 2007 (when you try to open a file) shows no results, only the category headers under "search again in. Only when you select search again in 'My Computer' all the files appear in the 'My Documents' folder.
- Search in Outlook 2007 works very well.
- When you use search in the Menu 'Start', none of the files from the "My Documents" folder will be displayed, but files everywhere else will be displayed. Do the same search and then click on 'My Computer', only the files in the "My Documents" folder will be displayed.
I tried rebuilding the Index index, the hotfix, change 'GroupBy' registry and registry keys under [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows Search] later reconstruction deletions. Nothing works.
Any help is greatly appreciated. Thanks in advance!
Hello Wolgang,
You can make bulk changes to file attributes by using the Attrib command via the command prompt: attrib - a [drive:] [path] [filename]
You can see the options by typing ' attrib /? "at the command prompt.
Paul LeBlanc MSFT
Paul LeBlanc MSFT
-
Search do not work properly!
Hello! I have that I use search criteria to search for data in DB. But the search will not work correctly.
When I search using the ' search all areas: "so I can get the necessary information." But when I add attributes and try to search then I get incorrect results, see search form: http://my.jetscreenshot.com/2677/20120820-stms-117kb
I want that if I add attributes 'The genetic resource Type' and 'Regional District of the forest' and enter the data, then my search engine search results that is common of these 2 fields added.
My search criteria you can see: http://my.jetscreenshot.com/2677/20120820-hdyg-141kb
In the search criteria, I use jointly OR, I I change it to and THEN above example works fine when I add 2 fields in the advanced search, but then a search using "search in all areas:" do not work.
Can we say where I'm wrong, what to add or change in my search criteria, so that everything works?
If you do not understand something or need more information, please let me know.
Best regards, Debuger!To do this, you will need to change skin. Depending on your version (that you don't tell us), this is more or less work.
You need to change the following descriptors
af_query. LABLE_CONJUNCTION = Match
af_query. LABLE_CONJUNCTION_AND = all
af_query. LABLE_CONJUNCTION_OR = AnyI hope that you use 11.1.2.2.0 as you can add the descriptors for the property resource bundle skin file. This file is created when you add a skin to your application. If you are using an earlier version, you may need to implement a ListResourceBundle and add it to the definition of the skin to the Trinity - config.Xml.
Timo
-
Why Windows Search does not work on my computer
I asked to fix the problem with search, but it's still doesn't work do not
Hello
1 how long have you been faced with this problem?
2. don't you make changes on the computer before this problem?
3. what exactly happens when you try to search for any file or folder? You receive an error message?Check if the problem persists in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.
The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.
See also the following article that may help you.
-
There are many sites, but I will say only 1 site because I have very bad memory, so here's the problem, Web site Furaffinity.net, search for his website may not work properly with Firefox, its advanced research, help and toggle the button description can be click but nothing happened after a click. However, my other browsers, Google Chrome and INTERNET EXPLORER horrible can work properly. I tried to fix it by resetting Firefox but it doesn't work.
Thank you, and I take back what I said about Firefox getting worse.
-
My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Is anyone know how can I access my hard drive again?
Thank you
Hello
You has made changes to the system before the error appearing? Cancel the changes.
(1) in Device Manager > right click on the driver, and then select uninstall
Reboot and Windows will reload the driver
(2) remove the upper & lower filters that cause errors in Code 31
http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
Access the manufacturer's Web site and search for updated driver
-
The 6to4 card device is not working properly
Hello
I did a system health report on my laptop and this problem appeared:
«The device 6to4 adapt does not work properly... it brings tv_ConfigMgrErr31...» The Plug and Play ID for the device is 14 "
What this mean and how can I solve this problem?
Y at - it update?
I just run Windows Update and my phone is up to date.
Thank you very much!
Hello
1. what version of Windows you are running on the computer?
2. you remember make changes to your computer before this problem?
Method 1:
Follow the steps in this link and check if that helps: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter
Method 2:
Try to update the drivers for your network card: http://windows.microsoft.com/en-US/windows7/Automatically-get-recommended-drivers-and-updates-for-your-hardware
Method 3:
Try to make an auditor of the system files on your computer and search for errors on the disc: How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7 http://support.microsoft.com/kb/929833
-
Built in mic on my Aspire 5738ZG do not work properly when I use Skype. I'm on windows xp, 32 bit. I installed the drivers Audio Realtek Acer official website but the microphone is still very low. Other people have said that they hear me very bad when talking on Skype, for example. What can I do?
You must check the Panel realtek on Mic Boost.
I don't know what version you have, but you can find some practical information to search on youtube on "realtek mic boost.
-
I HAVE a PROBLEM where the letters on the key edge that a number number only of central unit of the screen no letters for example k2 l3 if I hold down the fn key chicken that they wor2
Hello
1. What is the brand and model of the keyboard? It's a laptop or a desktop computer?2 did you any software or hardware changes to the computer before the show?
3. who is the antivirus installed on the computer program?
Method 1:Step 1: Safe Mode
Start your computer in safe mode and check the number.
To start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 2: Clean boot
If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.
Method 2:You can uninstall the drivers from Device Manager and reinstall the same thing again.1. click on Start, type Device Manager in the start search box and press enter.
2 look for the device for which you need to uninstall the driver.
3 right-click and select Uninstall and follow the on-screen instructions.
4. restart the computer, if prompted.
Install the latest driver again and check if that makes things better.
See the links below for more details on the update of drivers:Updated a hardware driver that is not working properlyUpdate drivers: recommended links
I hope this helps. -
ATI Graphics Driver does not work properly
All of a sudden when I play my games on Facebook my computer completely freezes. Reports error saying that the ATI Graphics Driver does not work properly.
I have checked all the updates of Windows, said that I installed all available updates. Help, please!Hello
First manually check the updated drivers with ATI and ask their support and Forums on all known
questions. Use the methods to update the following drivers.Download the Catalyst Drivers here
http://game.AMD.com/us-en/drivers_catalyst.aspxATI - Forums
http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11ATI - Support and drivers
http://support.AMD.com/us/pages/AMDSupportHub.aspx============================================================================
Other troubleshooting methods would include the boot minimum and others who might help determine
the cause and eliminate problems.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
-
Hello!
I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:
"This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »
When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?
Thank you!
Hello
You must get the drivers latset for m computer support site.
Delete the "false: entry in Device Manager and install the new drivers."
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Original title: windows media center
I have reinstall Win 7 and finally managed to the precious WMC got the signal, channels, etc., but when I select all the channels I get this: "the files needed to display video are not installed or do not work properly. Restart WMC, or restart the computer. "I have resource disc and have re-install the drivers and utilities to the best of my limited knowledge. Help, please
When I type in run in the start search box, it only pulls up "run programs for previous versions of windows" I can't run your steps without responding to this prompt. What should I do if I can't follow your steps as you put it?
-
Original title: corruption of the probably the key ".htm" registry is damaged or missing
Suddenly, IncrediMail does not work properly. I click on the message and get nowhere. It seems that it is trying to go to IE and can not find the web page. I searched everywhere on the internet and saw where others had the same problem, but I can't find the fix. One person suggested it be referred to Microsoft as a "failed to open local html file with IE' problem." I guess maybe that's a problem with the registry, but do not know how to fix it.
I can not even do a system restore or reinstall the IncrediMail program.
For assistance please ask for help in the IncrediMail Forum
IncrediMail Support Portal:
http://www.IncrediMail.com/English/help/choose-your-version.aspxDirectly in contact with the IncrediMail support team, click here
Cordially,
-
USB drivers do not work properly.
I have a netbook Vaio (name of the VPCM13M1E model) and USB drives will not work correctly. I ran a microsoft fix (hardware and devices one by one). The results said:
-universal host controller USB Intel (r) 82801g (ICH7 family) - 27 8 does not work properly, and it has not been fixed.-Intel (r) 82801g (ICH7 family) USB2 enhanced host controller-27CC does not work correctly, and it has not been fixed.-Hardware changes may not be detected.Its very annoying because I cannot plug anything on the USB.Help, please.CamilleThere was a lot of mistakes in the case where the display indicating a gel delivers that seems to have started in early April.
These gels seem to be preceded by the following error (Source - core-EventTracing):
Session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D
This error can be caused by a corrupted EppOobe.etl.
You may be able to resolve the freeze by recreating the EppOobe.etl.
First of all, can you do the following:
Start > type options files in the "search programs and files ' and press 'Enter' keyboard > view > then under" Hidden files and folder "select"Show hidden files and folders and drives"> OK
Then go to the following folder:
C:\ProgramData\Microsoft\Microsoft Security Client\Support
In this folder click EppOobe.etl , and then rename the file in EppOobe.bak
Restart the computer and let Windows recreate the EppOobe.etl.
I hope that will stop the freezing issue.
If the problem persists with USB you can restart the computer using safe mode and see if the problem exists in Mode without failure.
Maybe you are looking for
-
He said: I use an old version of firefox, when I have the most recent version.
Each Web sites (including Firefox.com...yet) tells me that I use an older version of the browser, but I don't know that I'm under Firefox 10.0 (the latest version at the moment).
-
I got an 8500 printer for a few years without any major problems and have been quite happy with his performamnce. Now it doesn't work at all. I got an error 0x61011bef code. I followed all the various instructions on the HP site and this forum (disab
-
I had to install LabVIEW on another computer, but when I tried to run my screws saved, IMAQ vision screws were not all installed. I couldn't, so I transferred the vision above an old computer as suggested here http://digital.ni.com/public.nsf/allkb/
-
Upgrade the processors HP G62-228NR
Hi, I have a HP G62-228NR , and I am wanting to upgrade the Phenom II processor here. I want to just make sure that this IS compatible, im sure it is, but I'd like a second opinion, thanks for any help!
-
installation of Ubuntu 9.10 OR Kal
@page {margin: 0.79 in}P {margin-bottom: 0.08 in.}--> I ran stranger - *.rpm and then dpkg scripts. I received a warning andthe installation fails. When I run UpdateDrivers I get: MUZ@Muz-E6500: / usr/local/natinst/nation/bin$ sudo. / updateNIDriver