"Bridge shun cal.vi" shunted the setting of the value?

Similar Questions

• Implementation of two R7000 mode bridge (1 connects them 2 the internet and all devices, use 2!)

  Hello

  I have trouble finding my drives NAS via Wifi.

  Since I moved my NAS drives to the location of my second router and connect the first router to the internet and all my mobile devices and laptops, I have problems connecting to my NAS readers. Sometimes it works, but more often, it's not.

  I've implemented the first router as "router mode" and the second router als 'bridge'

  Can I change the configuration, so that my second router is connected to the NAS drives and also works as my router for mobile devices and laptops? Then the first router just to connect to the internet and transfer it via the bridge on the second router.

  I tried this, but it doesn't seem to work...

  Concerning

  Michael

  Just to close this topic: got the solution works by using a set of powerline Netgear. It provides internet access to my router located posting the TV and works perfectly. Wireless AC is not the answer to everything, I realize ;-)

  Thanks for the discussion.

• Network Bridge works is not on the new physical machine

  I move a picture of centos comments of an old machine, host of win 7 to a new. Setting in network networking worked fine with this image on the old machine, but I can't make it work on the new. NAT network works fine on the new, but I need to use bridged. For some reason the image cannot access the DNS server (can not ping it) on the new host. I have disabled the firewall on the new host.

  Disable the automatic bypass and bridge directly to the host's physical network card in the virtual network Editor.

• Rotation of files in Bridge, do not appear in the original

  I found a recent problem in the bridge that if you select a series of photos in Bridge, then turn they don't all turn. Usually only the premiera rotates and the rest will stay the same way up.

  Also - and especially - when an image is rotated to the bridge NOT now wheel in the real JPEG image.

  I looked through the preferences and can't see what this would cause.

  Has anyone found this problem - to the ideas of a work autour?

  Thank you

  First try to use the menu Tools-Cache - Purge for the file cache.

  If no restart help bridge now press option key to refresh

  preferences.

  Set preferences again to your wishes and try again.

  Has anyone found this problem - to the ideas of a work autour?

• The value of browser.urlbar.autoFill is always set to false whenever I restart Firefox 28

  The value of browser.urlbar.autoFill is always set to false whenever I restart Firefox 28.
  I go to about: config and change the value 'true' but, after restarting Firefox it return false, so I can not AutoComplete URLS

  Note that your list of details of the system shows that you have a user.js file in the profile folder to initialize prefs each time you start Firefox.

  The user.js file is present than if you or another software has created this file and normally it wouldn't be here.
  You can check its contents with a text editor (right click: open with) If you do not create this file yourself.

  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  You can delete a possible user.js file and numbered prefs-# .js files and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved

• How to set the value of a variable in automator?

  I'm totally new to automator I found a post that I try to reuse

  to Re: copy multiple files from TextEdit in one Word file

  I want to open a series of html files in a folder and convert in a TextEdit rtf file.

  However, I am unable to automator find out how set the value of a variable such that it appears in this post

  I looked at every command in library without a lot of fortune

  Any help?

  Thank you

  Dan

  Its in Utilities.

  In Automator, use the search box:

  

• When I do exercise machine of the staircase, the k/cal burned into the machine does not match with the Apple Watch of the activity

  When I do exercise machine of the staircase, the k/cal burned into the machine does not match with the Apple Watch of the activity

  Example of

  Stair machine 550 K/CAL

  Apple Watch 30 k/cal

  Hello

  During a workout on the upstairs computer, record your activity using the app to drive on your watch, choose the stairs like the type of activity no. This allows your watch to use sensors and the data most appropriate to evaluate the results of your activity (including your heart rate, which is measured continuously during the training, when the training app using).

  More information: use of the application of the workout on your Apple Watch - Apple Support

• Set/save the value of the local population of LabView development

  Is it possible to set/save value of the inhabitants of Teststand of LabView in the update, so I do not write the value in the variable pane? I can do this to programmatically at runtime with SetProperty, but I want to define them in the update with a VI.

  Thank you

  I use LabViwe 2012 SP1 32 bit and Teststand 2012 SP1

  You have to access the SequenceFile inhabitants and then save it to disk.  I have attached a picture and my code.

  Kind regards

• Set the value of the parameter in the call sequence by programming

  Is there a way to set the value of the parameters of a call sequence with a vi with the context of the sequence in the order which is called? Cases not the same subseqence with a vi in the mainsequence maybe?

  

  In your VI, I think you should be able to set the value of Step.TS.SData.ActualArgs.paranumber.Expr to the value of the setting that you want. (This property is visible in the Variables pane, only if you have configured the Options of Station to display hidden properties). Note that the purpose of the step should refer to the sequence of your call step.  Also, remember that the property represents an expression, so if you want to pass the value 33, you must enclose the value in quotes ("33").

  Jeff

• Set the value of cluster control in secondary school

  Hello

  Is there a way to set the value of control from one cluster to a high school?

  I enclose my screw in LV8.0

  Charly

  If you have a reference to the VI being put into secondary (which there or it is not in the secondary, right?) you can use it to get a reference to the façade of the VI. This in turn will allow you to read an array of references to all the controls and indicators on the front of the Secondary VI. Cross this table by looking at the text property of the label: for each reference in the table until you find the one for the control of the cluster.

  Now, use the specific function to more class to convert reference generic control of the pole to a cluster reference. You can use it to get an array of all the controls within the cluster. Now, go through this table by looking at the text property of the label: for each reference in the table until you find the one for control quevous want to set and you are there...

  Mike...

• How to set the value of a variable in a cluster in LabVIEW to c#?

  Hi guys, I'm working on a small c# program, which by using the interface provided by LabVIEW.  And I know that, with the help of lv. SetControlValue (name, value) can set a variable just on the front panel. But in my case, there are several groups on the front panel. Then it confused me how to set the variables in these groups. For example, there is a cluster named clusterA and a variable named a., I tried something like this:

  lv.SetControlValue("clusterA.valueA",1);
  

  but it totally inoperable. Everyone has some experience with this sort of thing? Thank you very much!!

  Hey guys, thanks a lot for all your response. I just found a simple way to solve this problem. For example, there is a cluster named "ClusterA", and there are only two witnesses, who are: an int value named "IntA" (default = 10 IntA value) and a string value named "StringA" (by default the StringA = 'abc'). In c#, if you call the method:

  var clusterA is vi (Array). GetControlValue ("ClusterA");

  you will get a table looks like: clusterA = {10, 'abc'}; So if you want to change IntA 123, you simply do:

  clusterA.SetValue (123, 0); 123 the value, 0 is the index of IntA in clusterA, after this clusterA table = {123, 'abc'}

  After that, simply to make the table in LabVIEW using:

  VI. SetControlValue ("ClusterA", clusterA);

  and now you see the LabVIEW, IntA is changed.

• Set the value of a checkbox in a column of a tree control

  Hello

  I couldn't ' find the feature set/get the value of a checkbox in a column of a tree control.

  Thank you for your help

  Bertrand

  Hi Bertrand, this discussion should help you in this task.

• Setting the value of a table of ActiveX control

  When controling a VI through ActiveX, how is possible to set the value of a table control?

  With digital controls, I have a problem: I just use SetControlValue and it works well:

  til SetControlValue ('y', 4) for example.

  However, in trying to do the same thing with a table, the control's value becomes an empty array:

  til SetControlValue ("arr', [3-4-5]") for example.

  What is the right way to do it?

  Hi Calvin,

  Have you tried passing a string and convert it to an array entry?  You can also try to use a 'matrix' control, rather than a table, as they are handled a little differently.

• Given the wording and the value setting method

  Given a name/value pair, how to set a Panel control with the label name for a value of value?

  This seems like it should be simple, but I can't.

  I guess you are referring to a control on an another VI. In this case, you will need to open a reference to this VI, and then simply use the method to set the value of control:

  

  Notice that I use the version variant of this method. There is also one that works with the flattened data. Please see the documentation for more details.

• setting programmatically toggle the value of the button?

  Isn't this possible? I looked at help for the SetCtrlVal() and the SetCtrlAttribute(), and it doesn't look like it can be done. True?

  My app has a command button to clear the displayed graph. It would be nice that the first steps of the function to set the value of a button switches to "OFF". Any other way to solve this problem?

  Thank you.

  

  SetCtrlAttribute (, ATTR_CTRL_VAL, 0);

  or

  SetCtrlVal (, 0);

  works for me.