Set the value of the parameter in the call sequence by programming
Is there a way to set the value of the parameters of a call sequence with a vi with the context of the sequence in the order which is called? Cases not the same subseqence with a vi in the mainsequence maybe?
In your VI, I think you should be able to set the value of Step.TS.SData.ActualArgs.paranumber.Expr to the value of the setting that you want. (This property is visible in the Variables pane, only if you have configured the Options of Station to display hidden properties). Note that the purpose of the step should refer to the sequence of your call step. Also, remember that the property represents an expression, so if you want to pass the value 33, you must enclose the value in quotes ("33").
Jeff
Tags: NI Software
Similar Questions
-
can I set the permission allow my program
I want to use this method to close the camera and my application, backward
Inject the EventInjector.KeyEvent = new EventInjector.KeyEvent (EventInjector.KeyEvent.KEY_DOWN, Characters.ESCAPE, 0, 50);
Inject.post ();
Inject.post ();But if I want to use this method, I put my permission
by Options-> Advanced-> permissions Application-> [Your app]-> all together to allow...
so now I want to know can set the permissions of my program, so impossible, are these other method to turn off the unit and return to my application?
ESC is the escape key.
Send a keyboard for the escape key event through the EventInjector class.
-
How to set the default e-mail program
original title: I have the mail program, I want my program "by default". I tried to do it, but could not, why... Thank you, mike
I just got a new computer with windows 7 OP. I've been using a program of e-mail for some time, ('thebat") of Ritlabs s. R. l... I installed this program in
my Windows 7 system. I have a problem by setting the 'thebat' as default in Control Panel. Is there a way to do it? Thanks MikeOn Saturday, 22 September 2012 00:07:46 + 0000, ashmanor wrote:
I just got a new computer with windows 7 OP. I've been using a program of e-mail for some time, ('thebat") of Ritlabs s. R. l... I instaled this program in
my Windows 7 system. I have a problem setting the default "thebat' in the control panel. Is there a way to do it? Thank youPlease tell us exactly how you try to do. And what "I".
a problem' means. What happens when you try? If you get an error
message, please quote verbatim.Ken Blake, Microsoft MVP
-
Cannot set the default e-mail program
I can't send a picture from Windows Live Gallery.
He is told to do my e-mail default program, but it won't let meOT: lynda Laurent
can you help meThank youLyndaHi Lynda,
1. who is your provider of mail service?
2 are you using any client e-mail like outlook or Windows live mail?If you use any email client, then I suggest you to try the steps from the following link to set the program as the default e-mail client.
Choose the apps Windows uses by default
http://Windows.Microsoft.com/en-in/Windows-8/choose-Programs-Windows-uses-defaultI hope this helps! Let us know if you have other problems with Windows in the future.
-
Retrieving value of a conference call log and add call logs for a list of the calls list by program
Hi all
I want to add programmatically call logs in the call logs list, I want to extract data from a ConferenceCallLog and based on the results I'm launching a new Normal call log, I fetch these data of ConferenceCallLog callDuration, callStatus, participating, notes, date. Here is my code for this:
{} public void callLogAdded (CallLog callLog)
If (callLog instanceof ConferencePhoneCallLog) {}
ConferencePhoneCallLog newLog = callLog (ConferencePhoneCallLog);
callType int = PhoneCallLog.TYPE_PLACED_CALL;
int callDuration = newLog.getDuration ();
callStatus int = newLog.getStatus ();
PhoneCallLogID participant = newLog.getParticipantAt (0);
String notes = newLog.getNotes ();
Date date = new Date (callLog.getDate () .getTime ());try {}
Thread.Sleep (1000);
New Thread (new Runnable() {}
public void run() {}
phn.addCall (new PhoneCallLog (date, callType, callDuration, PhoneCallLog.STATUS_NORMAL, participants, notes));
}
({. start()});
} catch (InterruptedException e) {}
Generative TODO catch block
e.printStackTrace ();
}
}
}but the call log has not added to the national list of newspapers. Please help me
Turn on logging to the listener method. If it is run?
If so, put the same code of your screen there. It runs?
go step by step until you encounter something does not
-
I can't set the associations of files/programs
When I try to select a new program to open it with... diablog box to be used with a file type, just to ignore it and displays a list of the default programs that cannot be changed. If I select one of these default programs, the association is changed, but I can't choose a new program, what I really want to use.
Hello
Do a thorough check of the malware as shown in the 1st message that something is probably
block changes.Restore default Associations Vista file extensions - can reset you it using these?
http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.htmlHow Unassociate a Type of Extension file in Vista and a utility to help
http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.htmlUse the methods in the last post to fix your .exe associations and then use them to adjust the
rest as needed.How to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.htmlHow to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html
How to view and change an Extension of filename on Vista
http://www.Vistax64.com/tutorials/103171-file-name-extension.html====================================
If necessary, you can try a restore of the system to a point before that happened, however
which includes a danger of the spread of malware if you have Points to make.How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html Rob - bicycle - Mark Twain said it is good. -
Where can I find the name of the step of the call sequence
I'm looking for the right place in the RunStates where I found the name of the SequenceCall calling me.
Someone an idea?
Hello
Try NameOf (RunState.Caller)
or with the API, you can use the Name property of a reference of step
-
How to pass a number any parameter in a call sequence
Hello
I have a sequence that is intended to do the same job for one or more of the same items typed. for example:
______________
subsequenceA:
(all table elements) ForEach element
do the work
ENDFOR
______________
now in my caller, I want to call subsequenceA in several ways:
subsequenceA (firstElement)
subsequenceA (PremierElement, DeuxiemeElement)
subsequenceA (PremierElement, DeuxiemeElement,..., lastElement)
Is this possible?
Another question: is it possible to appeal a subsequence in an expression of pre?
No, calling the subsequences can be done using the step of SequenceCall. At least, it is not easy to make another way (because it requires a lot of knowledge of the TS API).
Why you not pass the array "such what '... (array parameter)?
Norbert
-
Hello
I am looking for a way, where I don't have to manually set the Options of the Station. I want to assure you that whenever someone runs my sequence, the sequence must ensure that the options "Active tracing" is disabled somehow. I know that the tracing option is actually a TestStand engine parameter, but I want to implement in my sequence.
Please let me know if this is feasible. If so, what will be the best approach?
Thank you and best regards,
Niraj
Depends on why you want to turn off the tracking. One of them might work for you:
(1) locks the file as not available.
(2) value RunState.Tracing false as the first step of your sequence (always get the trace of the first message to the sequence of)
(3) on the sequence of calls to the sequence set the call sequence trace disabled. (not implemented).
Hope this helps,
-Doug
-
The indicator of the test sequence parameter default setting
Hello
is there a way to test in a subsequence if a parameter has been defined by default in the calling sequence.
Thank you
Hello
Yes it is possible,
Try using RunState.CallingStep.TS.SData.ActualArgs
Hope this helps
Jürgen
-
ACCESS DENIED WHEN YOU TRY TO SET THE AFFINITY OF THE PROGRAM.
Hi people, this is my first post here. I have searched the forum for an answer but couldn't find it so please forgive me if I missed it and write the question again.
I'm trying to get better performance from my pc. I am running a quad core C.P.F. and try to set the affinity for certain programs are not not multi thread. (PC ONLINE EVERQUEST GAME 2)
I managed to channel some programs, but when I try to set the affinity for Everquest I comes up with an error message. 'ACCESS DENIED '.I found a page that had a work around, but I could not quite work on what they were saying.
If you know an easy way to do it could you help me please.
Thanks for your time :)
Hi Dagenham Dave,
You run the computer as an administrator?
You can follow the steps indicated by the msspbm, which addresses a similar issue, please see the link below:
This may interest you
Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
Please post if you have any questions
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
How to set the cursor does not to meet the opening?
When Karma rings in my pocket, it always ends slide open like I'm taking it out. This answers the call, the caller is confused until I have finally get the phone to my ear. Worse even if when he slides partially open and then closes in the process, therefore hangs on the appellant. Is it possible I can set the phone to answer when I press the reply button?
I had the same problem and never found an option to stop the opening of the slide to answer a call. (Looks like another option that Motorola could include in an update of the firmware... If they ever come out with one.)
But you can stop the call answer and then hang up. Go to settings > Intial configuration > Slide closed and assign the task to continue. At least if you change this setting, the call don't hang up while you get the phone to your ear and your pocket.
-
Set the string for LabView dll parameter
Hello
I created a simple vi LV 2010 (departure vi), which reads the identification of an oscilloscope. Then I take this vi and incorporate it into a dll of LabView. I have test the dll calling LabView (RunFrom dll). Basically, it seems to work, but len and ReadBuffer back empty. It must be in the way I'm configuration configuring the setting for Readbuffer (settings) in the configuration of the dll. I tried several different configurations, but nothing seems to work. Any help is appreciated!
What is the parameter len? Normally, you should only set the length of the string, but it seems that you did not do this. Also, you're passing len by value, and not by reference, so the function is expecting her to be a starter and you will never get return a different value to any value that you provide.
Do not use a local variable of the ReadBuffer for entry "readbuffer". You must pass a string initialized long enough to contain the expected quantity of data. The best way to proceed is to use the array to initialize to create a table of U8, then use the array of bytes to a string. Set the parameter 'minimum size' to 'len' then run through the length of the string initialized (this is not mandatory but is recommended). If you need the length obtained output, add another indicator and another parameter to this value. There might be a way to do it with one by len parameter passing by reference, you need to experiment (it is certainly feasible in C but I don't know if allows him to LabVIEW).
-
Do stuff to PL/SQl that returns the value and redirect to modal page by setting this value
Hello
a button click Page1 I would perform a PL/SQL procedure that returns a value in P1_ITEMVAL and then redirect to a page 2 (modal page) and the value of an item on this page with the value previously returned. To do the same thing with a normal page is quite easy:
Button action is present, then process of PL/SQL that returns the value in the P1_ITEMVAL element and, finally, a branch at page 2 that sets P2_ITEMVAL with P1_ITEMVAL. I really have no idea how to do the same thing when the target is a modal page.
I created a unit test on https://apex.oracle.com/pls/apex (application 1554 - redir_to_modal)
Workspace: tests
USER: supporter
PWD: supporter1234
Any help would be much appreciated.
Kind regards
Pavel
Pavel
If you prepare a URL using the value calculated in the PLSQL of DA part you can then use a subsequent stage of javascript to set the location of the window.
This will jump to the top of the page of the modal dialog box
: P1_URL: = apex_util.prepare_url)
' f ? p ='|| : APP_ID - Application id
|': 2' - Page id
||': ' || : APP_SESSION - Session id
||':' -- Request
||':NO' -- Debug
: ': ' - Clear Cache
: ': ' - Settings
||' P2_ITEMVAL'
: ': ' - Parameter values
|| (: P1_ITEMVAL);
then in the action of javascript
Window.Location.Replace ($v ('P1_URL'));
Hope this is of some use
Concerning
Kelvin
-
OBIEE dashboard how to set the default value of a prompt dynamically
Hello
I have a prompt that displays the quarter of the year. I want to put the default value of this prompt dynamically. So, if sysdate is between January and March, then fast should say 'Q1 '. If the month of sysdate is between April and June, then fast should say 'Q2'... etc.
I set the default selection of the prompt SQL suite and put in the following code:
SELECT BOX WHEN EXTRACT (MONTH FROM sysdate) IN (1,2,3) and THEN "Q1" double WHEN RETRIEVED (MONTH OF sysdate) (4,5,6) and THEN "Q2" double WHEN RETRIEVED (MONTH OF sysdate) (7,8,9) THEN "Q3" double ELSE 'T4' LATE double
However, it seems not be soon and there is no default value. I was just wondering what I'm doing wrong. Thank you!
~ Kevin Sun
What is the problem with the answer you were given in this thread: OBIEE parameter default value a "quarter" guest dynamically?
Maybe you are looking for
-
10.11.5 broken SMB YET :-(
Dear Apple; I know you're busy being better a whole but can you please stop breaking SMB? This becomes an annual event. You break SMB, we expect new firmware for all our products. They get it fixed; you update and break SMB again. Rinse and repea
-
How to scroll through the tabs with the mouse wheel?
I used to be able to scroll the selection of tabs when the tab bar is filled using my wheel mouse (like the arrows on each side navigation), but recently it changes the tab I look as if I physically clicked on this subject. I'd appreciate help on how
-
How can I add a stereo or mono mix to the sound engineer - Satellite Pro A100-196
I can't find this option in my settings of the sound, no mono or stereo under record?is it possible to add this feature to my laptop?or is it possible to do to the sound settings to make them?
-
"Re: Toshiba M10: replacement 7 k 200 with Advanced Format HARD drive" 7 K 750 HDD
Can we see problems with the replacement of the original Hitachi TravelStar 7 K 200 (200 GB) HDD, that went into my two year old Toshiba Tecra M10 - 11 X, with a so-called 'Advanced Format' 7 K 750 (750 GB or maybe 640 GB) hard drive? Like the origin
-
ATAPI iHAS324 what is ATA DVD ROM is not responding, error code 10
My DVD ROM(ATAPI iHAS324 Y ATA Device) no longer responds and it has an error code 10. How can I make it work again?