Bright Flash in-App

Similar Questions

• Update on the acceptance of the Apple of Flash / AS3 apps on apple app store

  I know there are several ways to package Flash applications so that they would work on IOS. However, are these still accepted by apple on the app store? If no, what is the best way to get existing Flash / AS3 apps on apple iTunes app store - importation in something like HaXe, or just simply go with objective c and import animations woth another package? I know there have been some previous posts, but I would appreciate it if someone knew the latest on it seems to have varied over the years...?

  You use the latest version of Flash Pro CC, replace your Flash AIR applications for iOS (you may have to recode some parts) and then with a membership Apple developers, you can publish to iOS devices.

• White screen white on approved Flash/AIR app

  Okay, so I got de-A-Rama Deluxe (game) works well in the Simulator. Downloaded from the store. App is approved. And the first thing I get are two zero star reviews from people who say that the game crashes when loading. Just bought and tested on the material (2.0 beta) and of course, I get a blank white screen and theme music, but no game.

  So I pulled it down immediately.

  Two questions:

  1. does anyone know why this could happen in a Flash/AIR application? I have a dozen games on Playbook and this is the first I've seen of him.

  2 - does anyone know why RIM would approve the game if it does not work?

  Well, looks like I found it. Took a whole day to comment the code, it would not appear elsewhere than on a playbook of material.

  Problem was in my high note object that stores small pieces of data in Flash SharedObjects (which, in the AIR, local unshared storage card unit cases). Of-A-Rama Deluxe a 20 rating categories, with wounds up to 99 in each category. I could not see any problems on other platforms, but it looks like the research that many SharedObjects on Playbook slowed the work quite that Playbook has been assuming that the app was broken and he was killing.

  I rewrote the high score of object to enter the scores according to needs rather than all at once, and that seems to have fixed the delay.

• How to view the StageWebView page in Flash Professional app .ipa

  I need to display a .mp4 file in a small application I build for iPad with Flash Professional CC. The best way seems to be StageWebView, but I can't get this to work. I found a code that is supposed to do the trick, but I keep getting errors: 1180: call to a method may not set file.

  Can someone give me please help with this?

  
  

  var webView = new StageWebView(); webView.stage = this.stage; webView.viewPort = new Rectangle( 0, 0, stage.stageWidth, stage.stageHeight); var path:String = new File(new File("app:/path/file.html").nativePath).url; webView.loadURL("app:/path/file.html");

  at the beginning of your lines of code, add:

  import flash.filesystem.File;

• How to add a flash ios app to play Center?

  Hello

  Flash Pro CC

  16 AIR SDK

  How can I add the iOS app to Game Center and present the best score?

  I see people refer to this http://www.milkmangames.com/blog/tools/#iosgc

  is there another way?

  Thank you.

  for those looking for a response

  Adobe Gaming SDK is the solution, you don't have to buy other extensions to add your Game Center app.

• Flash air app for IOS. Sound problem

  HI, I made a flash app for IOS. This flash content video. Video of the work correctly in the Simulator. I have the video work´s iPhone, but the sound is not.  Please I need solve this problem as soon as possible. Thank you in advace

  I found the solution with webView.dispose () and his works. Im going to test your solution as well. Thanks for your help

  import flash.geom.Rectangle;

  import flash.media.StageWebView;

  import flash.filesystem.File;

  import flash.utils.Timer;

  import flash.events.TimerEvent;

  Stop();

  button_1.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage);

  function fl_ClickToGoToWebPage(event:MouseEvent):void

  {

  var webView:StageWebView = new StageWebView();

  webView.stage = this.stage;

  webView.viewPort = new Rectangle (285,265,640,480);

  var fPath:String = new queue (new File("app:/kk.mp4").nativePath) .url;

  webView.loadURL (f)

  hh.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame);

  function fl_ClickToGoToAndStopAtFrame(event:MouseEvent):void

  {

  webView.dispose)

  };

  }

• Flash-Air-App iOS and new Apple App Store (XCode 5)

  Hi Forum,

  I use Flash CC for the development of an iOS App (AIR).

  Now, will soon update Apple iOS to 7.1 and Apple says that, as of February 1, 2014, you can only publish iOS Apps created in XCode 5 in the App Store.
  Or how I have to read this statement from Apple: "From February 1, new applications and app submitted to App Store updates must be generated with Xcode 5 and iOS SDK 7."
  

  How will this affect my project?

  It will always be possible to publish a FLash-Air-iOS-App via App Store?

  Thanks in advance

  Ralf Kopp

  Adobe fixed this internally. Just update your adobe air sdk to the latest from labs.adobe.com

• Dell XPS 420 not go, bright, flashing orange light orange on the motherboard, flashing green light behind USB on motherboard

  I am running Windows 7 on my XPS 420, I had updated the power supply two years back and installed extra ram and an SSD, a few months ago.

  I quit the PC last night, normally

  This morning, it is not booting, the light was blinking orange, including the connected mouse was blinking also.

  I decided to open it and check all connections; everything went well on the inside.  Before you open the PC, I unplugged all the extras connected like mouse, etc.

  The computer has actually started up normally and when I plugged the monitor it looked ordinary, he had reached the Windows login screen.

  HOWEVER, when I plugged the first rear USB component, the computer off and started to blink.

  I'm not sure what the problem is here.  My motherboard is fried?  I don't think it's the power supply from the computer DID resume after I noticed the blinking yellow light.  I wonder if the flashing of the earlier mouse and/or the flashing green on the back (inside the PC) of USB port average something else.

  Any advice is greatly appreciated

  AC360

  First check that all the cables for power and data are correctly connected, including the cables on the front panel.

  No difference and if you're comfortable working around computers, you can try the following:

  Note: The only 100% POWER supply test method, is to install a known working power.

  Unplug the power cord, hold the power button in for about 15-20 seconds, open the case, disconnect the power connector 24-pin motherboard and jumping the Green wire to one of the black wires, plug in the power cord and the power of the system, if the PSU, case fans and disk hard drive performance then the power supply can be good.

  Note: Do not remove the wires from the plug, use a small piece of wire or a paper clip as a rider.

  Extract supply and the system still does not work, yet once remove the power cord, hold button power in a few seconds to discharge residual power, reconnect the connector 24 pin to the motherboard.

  Remove any PCI video card [as appropriate], memory cards, all the devices, unplug data cables and power to all readers, check that the cable from the front panel is connected to the motherboard, without anything else connected to the system, reconnect the power cable and power the system on.

  If there is no difference in the diagnostic lights, of "Beep" codes and/or the indication of the LED on the power button, it would seem that the motherboard is dead and/or the processor and the only method I know to check a processor is perhaps install a compatible work PC, or use a known job processing.

  Bev.

• Problem download my Flash/air app to iTunes connect: invalid signature

  I have developed an application using Flash CC set to deploy to 3.8 AIR for IOS. Now, I'm stuck on the last obstacle: submit the application for iTunes connect.

  I downloaded successfully the application - outside a few warnings on the icons size 120, 76 and 152. And then immediately after I get an email which reads as follows:-

  We found one or more questions...

  Invalid signature - Make sure you have signed your application with a certificate of distribution, not an ad hoc certificate or certificate of development. Verify that code in Xcode signing settings are correct at the target level (which cancels all values to the project level). Additionally, make sure that the bundle you load was built using an output in Xcode target, not a simulator target. If you are certain that your code signing settings are correct, click on "Clean" in Xcode, delete the 'build' directory in the Finder and rebuild your output target.

  I checked, re-checked and checked again the certificate.p12 and the provisioning profile. They all look good to me, not "ad hoc" distribution-updated The deployment type is set to "Ap Apple store".

  I do not see what hurts me and makes me crazy (and of course, I'm on a deadline).

  Help, please.

  Thanks for the tips. I posted the solution deliver me here: http://forums.adobe.com/thread/1382739

• After the installation of flash player apps for everything say that I did not install

  I have installed adobe flash player several times it shows as installed on my computer but when I go to watch a video, I don't then tell me that all applications to install adobe flash player, I uninstalled turned off the computer and reinstalled the program nothing works

  What is this page say about your status/version of flash player: http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html

• Created with Flash CS6 app does not work on iOS6

  Hi, I have developed an application with Flash CS6 iOS and it works perfect on iOS 5.1, but today I updated my iPhone 4 iOS beta 6 for developers and my application do not work! Applications developed with CS5.5 work well on iOS 6. How to fix? I tried to save to the format flash cs5.5 and open it with CS5.5 for export, but it does not export anything! Please give me a solution.

  This morning I updated the Air SDK to 3.4 and my problem was solved. Everything works now as expected.

  Maybe it is a good idea to ship the CS6 version with the latest version of the SDK, or telling people to update.

• VB6 & amp; Flash: VB app closes abruptly

  
  
  Hi there, anyone having idea why VB6 application is closing abruptly when certain events fired in the flash animation. I wrote the action script code 1 (as the setProperty method) and flash player 9. previously, he was OK with flash player 8... any help would be appreciated.
  
  Thank you!
  Gane.

  Cool... I had solved it by changing the setProperty method with. (dot) notation.

• Flash form App is not running in the browser

  I just develop a nifty chat application written with ActionScript2.0 and the use of classes. It works very well in the IDE and if the .swf is executed directly.
  
  However, when it is embedded in a browser (IE and Firefox) it appears that no scripts are running. I tested it and it works with Flash Player 7 and my browser is running version 9.
  
  Is it a rookie mistake? I am-ish professional Flash development.

  Please ignore this announcement. I had the url localhost in the WebService component.

• computer will not start at the top. Did just a bit of noise and a bright flash, but nothing else works, not even the monitor

  No Visual on the screen.  The computer does not (noise) to turn on.

  All I can do is repeat my previous tips for you:

  If nothing appears at all, it seems to be a hardware problem.

  If under warranty, contact the manufacturer of your computer.

  If it is not under warranty, contact a local and trusted computer repair shop.

  Good luck with it.

  See you soon.

  Mick Murphy - Microsoft partner

• BlackBerry Q5 BRIGHT FLASHING RED. MODEL 1 SINGLE FOLLOWED BY 6 FLASHES BLINK

  Hi guys.

  My Q5 after I security wiped, its not looking up at all. No display at all, except the city light does blink.

  I long pressed both keys of volume for a long time, no response.

  I pressed for a long time the power button no response.

  PLEASE HELP ME.

  Thank you very much for the reply.

  However soon after posting the message that I did the same thing and it is resolved.

  Thank you 1 million.