5.5 installation create do not link configuration

Similar Questions

• JumpStartKit installation hangs at 87% complete when creating the database / instance configuration

  Hello people, I am wanting to evaluate Oracle WebCenter Portal 11.1.1.8 (huge improvement over 11.1.1.7, which I have already given a quick test in the VDI provided by Oracle).

  So, I've discovered this Jump Start Kit that installs every needed part once you have a properly configured Linux environment. I had fun with the prereqs but now that everything is finished and I am so EXCITED to make it past 'STAGE 4 '.

  So now, I encounter the same problem during installation - STEP 6 of 22 Configuration of the database Instance (creating database filling) it gets 87% complete and then nothing seems to happen, it never beyond this point, even if I wait 10 hours more:

  ***

  NOTE: I think that my problem is not specific to the "Jump Start Kit", but is rather something others have met during the stage of creation/configuration of the Oracle Universal Installer in general database. And I hope that others have solved.

  ***

  "/ opt/oracle/portal" is my INSTALL_DIR; I had started the installer of JSK with this command:

  . / runme INSTANCE_PASSWORD textile ROOT_PASSWORD = rpwd DOWNLOAD_DIR = = / media/sf_Downloads/JSKfiles INSTALL_DIR = / opt/oracle/portal

  -L' installer makes this well before it seems to get "stuck" - even after many hours there is no change, HD does nothing, CPU stays at < 5% use:

  rtkit.main.JSKStarter - launchScript:172 - kills Jun 10 15:41:38 MDT 2014: BEGIN STEP 6 of 22: Configuration of the database Instance. Estimated time is about 5 minutes. Please wait..

  15:41:38.545 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 -.

  15:41:48.222 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - copy of database files

  15:41:48.413 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 1% complete

  All the 15:41:52.894 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 3%

  All the 15:41:52.915 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 11%

  All the 15:42:02.917 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 18%

  All the 15:42:32.920 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 26%

  15:42:42.638 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 37% complete

  15:42:42.640 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - creation and start-up of Oracle instance

  All the 15:42:48.568 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 40%

  All the 15:42:56.827 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 45%

  15:42:57.357 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 46% complete

  All the 15:42:57.526 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 47 percent

  15:42:57.627 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 48% full

  All the 15:42:57.834 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 49%

  15:44:42.915 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 54% complete

  All the 15:44:42.963 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 59%

  All the 15:44:43.036 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 60%

  All the 15:44:43.452 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 61%

  15:44:43.452 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 64% full

  06/10/2014 15:44:43.453-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - creation of database of fill

  15:44:43.493 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 68% complete

  15:44:43.510 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 72% complete

  15:44:43.571 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 76% complete

  15:45:01.516 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 87% complete

  I use VirtualBox on Windows 7, I tried several times, first with the OS as Oracle Linux 6, then Oracle Linux 5 (learning to update the version of Java of fun!).

  It always happens at the same point, and then it just seems do nothing - no progress, but no error no message on the screen (see below the log files). But it seems to use less than 5%... the use of the processor and 10 hours of waiting makes no difference.

  After that I got tons of Google to search, I tried increasing my paging file, adding more memory and disk space (12 GB of RAM and 10 GB sap) and 20 GB of free space on the hard disk, but still nothing has changed.

  In post #2 of this thread, I'll give you separately the registration details that I hope will be useful.

  Thanks in advance!

  Darren.

  PS: Moderator, I tried to create this thread in other spaces, because I did not know this 'Portal JSK' specific one, which is why my son was rejected? NO REASON WAS GIVEN. If that IS the reason why, I must say that it will be almost impossible for anyone who is able to help me actually FIND this thread here because as I said I don't think specific for ONLY JSK portal. (But I'll post it here just in case this is the reason for previous releases)

  Hey Darren -.

  Installation with installation "office" is not the problem - no conflicting package it.

  I did add a short and FULL in/etc/hosts domain name and use the HTTP_SERVER_NAME option.  (But again, that shouldn't cause any problems during dbca.)

  I didn't install VBox extensions, since I'm just using a text installation (and created a corresponding configuration for VBox and vSphere), but I don't know that this is unrelated to all the.

  Regarding packages, if the database installs fine (which did you), your packages may very well.

  Here is my kickstart file - maybe you can try to use it, and then we can rule out configuration problems.  After the kickstart, everything I do is copy the installation files (in fact, I have them on a separate vmdk I just ride), and:

  (in oracle)

  CD/mnt/orainst/install & mkdir WCPortal_JSK_Linux.x 86-64 & WCPortal_JSK_Linux.x 86-64 cd & unzip /WCPortal_JSK_Linux.x86-64.zip...

  CD /mnt/orainst/install/WCPortal_JSK_Linux.x86-64 &. / runme DOWNLOAD_DIR = / mnt/orainst/installation INSTALL_DIR = / u01/app/oracle/product/webcenter HTTP_SERVER_NAME = wcportal.localdomain INSTANCE_PASSWORD = weblogic1 BIENVENUE1 = ROOT_PASSWORD

  If you want to make a desktop installation, delete the text, skipx and office packages (I added a few comments around that part), and it should work fine.  Don't worry about VBox extensions until you have a JSK running successfully.

  Fingers crossed it gets you more... Let me know.

  -Ed

  #platform = x 86, AMD64 or Intel EM64T

  #version = DEVEL

  # The firewall configuration

  Firewall - disabled

  # Install OS instead of upgrading

  install

  # Use installation CDROM support

  CDROM

  # Password Root

  rootpw - plaintext BIENVENUE1

  # Authorization system information

  AUTH - useshadow - passalgo = sha512

  # Use installation in text mode

  text

  # Keyboard system

  keyboard us

  # System language

  lang en

  # SELinux configuration

  SELinux - disabled

  # Do not configure the X Window System

  skipx

  # Disable firstboot

  Firstboot - disable

  # Level installation registration

  logging - level = info

  # System timezone

  time zone - isUtc America/New_York

  # Network information

  network - bootproto = dhcp - device = eth0 - onboot = on--hostname = wcportal

  # Boot loader configuration

  bootloader - location = mbr - driveorder = sda

  # Clear the Master Boot Record

  zerombr

  # Information partition offset

  clearpart - all - initlabel - discs = sda

  # Partition of a disk information

  part/boot - fstype = ext4 - size = 500

  part pv.01 - growth size = 1

  volgroup vg_wcportal - pesize = 4096 pv.01

  logvol / - fstype = ext4 - name = lv_root - vgname = vg_wcportal - size growth = 1

  # choose only one of the three following instructions

  # / tmp/swappart only works if uncomment lines in pre calc memory size

  #% include/tmp/swappart

  #logvol swap - name = lv_swap-= vg_wcportal - size = 12288 vgname

  swap logvol - name = lv_swap-= vg_wcportal - size = 9216 vgname

  % before

  #MEMT =' cat/proc/meminfo | grep ^ MemTotal | AWK ' {print $2 '}'

  #let SMEM = $MEMT/1024

  #echo 'swap logvol - name = lv_swap - vgname = vg_wcportal - size = $SMEM' >/tmp/swappart

  end %

  % post

  #rm f/tmp/swappart

  # Fix for nproc problem on OL6 (MOS score [1487773.1 ID])

  -i EI sed / ^ \ * \s * soft\s * nproc\s * $ 1024 / * \t-\tnproc\t16384 /' /etc/security/limits.d/90-nproc.conf

  # It's ugly, but seems to be necessary for ks on vsphere (not on vbox), so adding the controls

  Oracle ID > / dev/null 2 > & 1

  If [$?-eq 0]; then

  userdel oracle

  RM-f/var/spool/mail/oracle

  rm - rf/home/oracle

  FI

  groupmod oinstall > / dev/null 2 > & 1

  If [$?-eq 0]; then

  groupdel oinstall

  FI

  groupmod s/n > / dev/null 2 > & 1

  If [$?-eq 0]; then

  groupdel dba

  FI

  Groupadd-g 501 oinstall

  Groupadd-g 502 s/n

  g 503 groupadd Oper

  Groupadd g 504 asmadmin

  Groupadd g 506 asmdba

  Groupadd g 505 asmoper

  adduser, 502 - g oinstall s u g/n, asmdba, oper, oracle of wheel

  passwd oracle<>

  EU1

  EU1

  EXPRESSIONS OF FOLKLORE

  # kdump(1) not enabled when you install text without firstboot

  / sbin/chkconfig off kdump(1)

  Hostname = wcportal

  echo DHCP_HOSTNAME =------"$HOSTNAME\" > / etc/sysconfig/network-scripts/ifcfg-eth0

  IPADDR = "/ sbin/ifconfig eth0 |" grep inet\ addr. AWK '{print $2} ' | cut d: f 2'

  echo $HOSTNAME.localdomain $IPADDR $HOSTNAME > / etc/hosts

  # Disable graphical boot

  # but doesn't for some reason any!

  sed-i of / rhgb quiet / / g' /etc/grub.conf

  mkdir Pei/u01/app/oracle/product/webcenter

  chown-r oracle: oinstall/U01

  end %

  % packets

  @additional-devel

  @base

  @compat-libraries

  @console-internet

  @debugging

  @directory-customer

  @mail-server

  @fonts

  @graphical-admin-tools

  @hardware-monitoring

  @java-platform

  @large-systems

  @legacy-unix

  @legacy-x

  @nfs-file-server

  @network-file-system-client

  @network-tools

  @performance

  @perl-runtime

  @scientific

  @server-platform

  @system-admin-tools

  # - UNCOMMENT TO DESKTOP - START

  #@basic-desktop

  #@desktop-platform

  #@x11

  # - UNCOMMENT TO DESKTOP - END

  compat - libcap1.x86_64

  compat-libstdc ++-33.i686

  compat-libstdc ++-33.x86_64

  elfutils-libelf - devel.x86_64

  expect.x86_64

  GCC - c++ .x86_64

  glibc.i686

  glibc - devel.i686

  ksh.x86_64

  libaio.i686

  libaio - devel.i686

  libaio - devel.x86_64

  libgcc.i686

  libstdc ++ .i686

  libstdc ++-devel.x86_64

  NSS-softokn - freebl.i686

  numactl - devel.x86_64

  unixODBC.i686

  unixODBC.x86_64

  unixODBC - devel.i686

  unixODBC - devel.x86_64

  glibc.x86_64

  glibc - common.x86_64

  glibc - devel.x86_64

  glibc - headers.x86_64

  NSS-softokn - freebl.x86_64

  Oracle-RDBMS-server-11 GR 2-preinstall

  end %

• 'Create a Windows 7 or a later version installation disc' does not appear as an option to select tasks

  I have a MacBook Pro (15 inch, late 2011) race El Capitan.  I just installed a new hard drive and am trying to install Windows 7 using Boot Camp Assistant.  In the window select tasks 'Create a later version or Windows 7 installation disk' does NOT appear as an option.  How to create the Setup disk?

  

  I use https://support.apple.com/en-us/HT205016 to get step by step instructions

  I have already created the disc image of the DVD install disk Windows following the instructions of https://support.apple.com/en-us/HT203909

  When I open Boot Camp Assistant I'm unable to create a Windows 7 installation disc

• Bought an ipad at a reseller on ebay but the previous owner of the ipad has not removed its link to ID apple for ipad. How can I remove this link to create my own link ID apple now?

  Hi all

  I'm looking for emergency one-handed helpig on this:

  Bought an ipad at a reseller on ebay but the previous owner of the ipad has not removed its link to ID apple for ipad.

  What should I do to remove this link and create my own link to apple to my account alle ID now?

  Bright ideas?

  Thanks in advance.

  BR,

  Bodo

  Sorry, but the only option is to return the iPad.

• I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition.

  * Original title: installation of windows 7

  I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition. Why installation does not create a new partition.

  Try the following

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Press SHIFT + F10 from your keyboard

  type the following commands

  DISKPART

  Press enter

  the list volume

  Next, you select the volume where you want to install Windows 7

  Type: select disk #.

  # represents the number of the volume

  Type: clean

  convert mbr

  create the primary partition

  assets

  format fs = ntfs quick

  output

  output

  Try to reinstall.

• Downloaded Windows 7 Pro trial version (previously using XP pro); currently a student of Microsoft Office 2003 version not in "all programs"; directly from the place of the app to get "operating system is not currently configured to run this application"

  Trial download using Windows 7 Professional (previously had XP pro)
  Student Microsoft Office 2003 version is no longer in "All programs" on the start menu
  Running EXCEL, WORD etc application of the subdirectory of the program file generates "operating system is not currently configured to run this application"
  Still have diskettes for installation for Office 2003, but the box with the product key is lost, this effect cannot be re - install.
  Microsoft Office does not appear in Control Panel programs in Windows 7
  How can I get Microsoft to work again without reinstalling Microsoft Office?
  If I have to re - install, how I get lost product key for Microsoft Office?
  I tried using Compatibility Wizard without result.

  Hello
  Welcome to the Microsoft answers site.
   
  The question you have posted is related to Outlook and would be better suited to the Microsoft Office community.
   
  Please visit the link below to find a community that will provide the best support.
   http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
   
   
  Thank you and best regards,
  Azam - Microsoft Support

• How to create a symbolic link for Window 7?

  I'm trying to put in place a Web of Appache server to experiment with WordPress development.  I installed a program called XAMPP installs the MYSQL server, the Appache server and PHP stuff necessary to create a working environment.  The author of the book suggested that I create a separate directory C:\WPDev to use for the development of WordPress.  I was able to make the necessary changes in the httpd.conf file for Apache server to recognize this place, but now I can't return to the PHPAdmin Panel I need to manipulate the MySQL database.

  So, what I thought I would do, is create a symbolic link to the original webroot folder in order to access these applications.  The command to do this, I read is:

  MKLINK [[/ D] |] [/H] | [/J]] The link target

  /D creates a directory symbolic link.  Default is a file
  symbolic link.
  /H creates a hard instead of a symbolic link link.
  /D creates a directory junction.
  Link specifies the new symbolic link name.
  Target Specifies the path (relative or absolute), which means the new link.

  My problem now is the following.  I am logged on as administrator, and yet I get this error message when I try to use the command:

  c:\WPDev>Mklink/d: xampp C:\xampp\htdocs
  You don't have sufficient privileges to perform this operation.

  Why have I not sufficient privileges to perform this operation as an administrator on this machine?  This makes not much sense to me.

  My guess is that it has to do with the permissions to this administrator user ID.  Looks like the WPDev directory inherits the permissions of the parent disk, but unlike Windows XP, I can't just take control of this directory and start to change the permissions.  When I look at the permissions summary, I think I should be able to do.   I think I have all the permissions, but there may be something on the command mklink that I'm missing.

  You need to elevate your privileges:

  1 log in under an administrator account.

  2. click on the start planet.

  3. type the three letters cmd in the search box.

  4. press on Ctrl + Shift + Enter

  5. click on "run as Administrator".

  6 type the mklink command.
  You can also use linkd.exe that doesn't require elevated privileges. It is provided with the Windows 2000 Technical Resource Kit.

• I can't download anything, because error "the Windows Installer Service is not to be accessible"

  Windows Installer service could not be accessed. This can occur if you are running windows in safe mode or if windows Installer is not installed properly. Contact your support team.

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  If this is insufficient, the I would say to install the Windows Installer Cleanup utility and run that to remove the Java remains Setup files that can cause problems with your current installation.

  For more information, visit the below mentioned link:

  http://support.Microsoft.com/kb/290301

  ------------------------

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• I get an error message "the installation package could not be opened" when you try to install the downloads (for example java)

  It comes up with a box indicating:

  This installation package could not be opened.  Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package.

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  If this is insufficient, the I would say to install the Windows Installer Cleanup utility and run that to remove the Java remains Setup files that can cause problems with your current installation.

  For more information, visit the below mentioned link:

  http://support.Microsoft.com/kb/290301

  ------------------------

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• is there a way that we could create a unique link that someone can click on an email to bring them to a cart to fill their quote?

  is there a way that we could create a unique link that someone can click on an email to bring them to a cart to fill their quote?

  Hello

  Here is how the configuration would work - http://client2.worldsecuresystems.com/get-quote/java-in-a-nutshell - you can add some nice CSS to ensure that the screen does not Flash or anything like that. Here's how it was built:

  1. create a new model, paste this piece of code inside:

  {tag_pagecontent}
  

  2 create a new catalog, all the products of this catalogue will redirect users directly to the GET a quote form. Assign the model created in step 1

  3 change the presentation of the latge product and place the button buy now in a hidden div:

   
  {tag_buynow}
  

  4. change the shopping basket page layout and make sure the GET a quote button is present:

  {tag_getquotebutton}
  

  5. place this code at the end. You need to replace 606879 with the ID of the catalog created in step 2

  {% if globals.get.CatalogueID == 606879 %}
  
  {% endif %}
  

  What will happen, it is like this:

  1. whenever someone opens a product using the link to the custom catalog buy it button will now be clicked
  2. the site visitor is then redirected to shopping cart layout where the other script checks the catalog, the visitors came. If this is a "known" catalog redirect another arrives and load the GET a quote layout

  Make sure that you have loaded in your models of jQuery and liquid activated on your site.

  One more thing, you need to monitor is you will need hide this catalog custom catalog your site listing.

  Hope this helps,

  Mihai

• How can I reload CS5 when the installer disc will not initialize?

  Have the original disc of CS5. Deleted Adobe Audition to my PC when I had a problem

  find a file I had just recorded. In the past, reinstall went out the hiccups and everything was fine.

  Now, despite repeated attempts, the installation program will not initialize... He's here. Tried the

  Download softward useful... but nothing there has no effect.

  He has created a number I'm supposed to hang on to: 40-57766-210312062013 for

  whatever it is interesting (less?). Arrrrgggh!

  If you follow the 7 steps you can dl a free trial here: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  and activate it with your serial number.

  If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

• What does the Create action not?

  Hello
  
  I use JDeveloper 10.1.3.4 and you have questions about the action Create {color} {color: blue}.
  
  I have a data table named USERS and a corresponding VO in the data control palette. Drag and drop the original Version of users to the page as a table with the column of enabled selection, I let the user be able both to delete a selected line and create a new line.
  
  I'm new to this, but for deletion, there is no problem: drag the delete action under the control of data users VO and drop it into the table {color: green} > table facets > Selection > af:tableSelectOne - Select and node {color}, then drop the request module commit an act on the page also as a commandButton control. And the selected line can be deleted and committed deletion using these two new buttons.
  
  Similarly, I dragged the action Create {color} {color: blue} and he fell in the table {color: green} > table facets > footer node {color} like a command button. When the page is running, nothing is visibly when you click on the button create {color} of {color: blue}. I understand that you do not select a line to create a new line, so I did not put the button create in the same node with the button Delete. And I guess I'll have to create a separate page for the user to enter the values in the fields on the line must be created.
  
  What I want to know, what's this button with the action {color: blue} create {color} inside is different than a generic commandButton created from the ADF Faces Core > commandButton? If I create a commandButton control in the component palette that is empty inside. But by using the action of creation as a commandButton control, is not yet clear to me that creating would make the action inside the key. On the other hand, there must be a reason for the {color: blue} action Create {color} be there slot that VO in the range of control data for us to use. What is the reason? And that makes the action Create {color} {color: Blue}?
  
  Thanks for answering my question!
  
  
  Newman

  Hello Newman,

  If you want your new line to be available in the whole of current lines (for example to edit directly in the table, not on a form), then take a look on the CreateInsert operation. Otherwise, you need a form to edit the new line.

  Check out these links:
  [13.6 creating an entry form: http://download.oracle.com/docs/cd/B32110_01/web.1013/b25947/web_form.htm#CACECCJA] in the dev guide
  [10.4 how to add a button create on a Page | http://download.oracle.com/docs/cd/B31017_01/web.1013/b25947/bcdcpal004.htm#sthref820] in the dev guide
  [New line using operation CreateInsert | http://andrejusb.blogspot.com/2006/12/creating-new-row-using-createinsert.html] in Blog of Andrejus Baranovskis

  What I want to know is how this button with the create action that it is different than a generic commandButton created from the ADF Faces Core > commandButton?

  When you create a button for the create action, your page links are configured automatically, then a link to action to create a to-do from the iterator is added to your pageDef (and this iterator is bound to your view object).

  And what is the Create action not?

  The create action creates a new line but does not insert it in the whole of lines.

  Kind regards
  Patrik

• Installation DVD does not recognize my internal HD on a 2008 iMac

  I'm looking for suggestions here.  My 94 year old mother has used the iMac 2008 8.1 for internet e-mail.  We needed to upgrade its OS X 10.5 to be able to upgrade to a new version of safari to access some banking sites.  I upgraded the memory.  Sister has an iMac with OS X 10.6.2 Installation/restore dvd 2010.  I went to update.  I have caused the initial problem because after reading info seemed I could create a second partition on the hard drive of 250 GB and use Time Machine to back up before preceding.  See not all the warnings on the addition of the partition. (Yes, if I had not forgotten my external hard drive I should not try that, but I forgot it.)  Things seemed to make the partition, but time machine bogged down and hung up.  After trying many things, I found myself deleting and resetting on the internal extended (journaled) using HD, recreating a single partition using the guidelines GUID, thinking that I could just do a clean reinstall.  BUT, while I can check/fix delete etc the internal disk utility when HD started from my external hard drive so I boot from the OS install DVD it does not recognize the internal HD.   ? ? ?   Gives cannot update this post Mac.  If I run the Setup from the beginning of the disk upward once again, no offers to go to in the installation program.  I can access everything in THE RUNOFF when the post boot drive.

  Why THE works on the internal HD of the post start up (which was made with the 10.6.2 installation DVD), but not when started to leave the DVD left me puzzled. The DVD is not just see the it.  When it is started from the DVD with the external drive, he sees very well.   You are looking for ideas, thank you in advance.  By the Way the machine had no problem before starting this :) live and learn!

  If I understand what you were doing, you tried to use a Mac installation disc and to update another Mac? Is this correct?

  If I am not mistaken, which simply does not work. The installation provided with Mac discs won't work on another Mac, the original installation discs are machine-specific.

• How can I create a local link to a particular message

  Hello world

  Someone have an idea on how to create a local link to a particular message, such as those created when you drag and drop an e-mail to the calendar app or task?

  I want to use these links to paste into Evernote notes and tasks Omnifocus... the idea is do not stick all of the e-mail... just a link

  Thank you

  Drag the column to preview message Mail message to the Dock or the office.

• Tower of EliteDesk 800 of G2: 800 swap system G2, computer Board is not fully configured.

  I just swapped a systemboard in a 800 G2. Installation is finished it and went into the bios to set the system ID's

  I have put all the your computer and I screamed a few times for typo'ing the FeatureByte, then it took. I rebooted and it jumped me in bios, asking if I wanted to validate the settings. Everything seems OK, then I say Yes.

  It restarts again and now I still see the message "the system is not fully configured" at startup.

  It gives me no indication of what the problem is.

  The configuration menu of the ID system is finished now.

  I tried to boot into the bios and hit ctrl-a to see if it would work, but I see nothing on the system ID in the Security menu.

  Any other suggestions to find out what is the cause?

  The tech came out.

  He could not get the editing mode (ctrl-a) to display the system id in the Security menu is.

  He checked that I have entered all the information correctly and that he was perplexed as well.

  He was on the phone with HP to order another motherboard when, after a few dozen restarts, the error has disappeared and has not returned.

  Nothing has changed in the bios. as we were able to edit previously entered values.

  I have no idea what caused it disappear, but we can mark this issue is resolved.