10 Windows does not install

Similar Questions

• service pack 2 for Windows does not install

  Hi, can someone help, I'm not very good with computers but I can't get the update of windows to complete and depends now, my printer does not computer is running really slow, bought a registry fix program did make a difference ruling ever, I tried all the suggested solutions and none have worked. Help, please!

  Registry "fix" programs do more harm than good.

  Largely steer away from them.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows does not install updates.

  Whenever windows downloaded upgrades, he installed the. But lately, when I stop it says to not power off or unplug Machine. Installation of update 1 of 1. He has always worked until recently when the message has stayed for more than an hour and then I unplugged then re plugged my computer then I booted windows normally. I tried again and it is same thing. Instead of close seeded and installation, I installed the update in Windows Update, then it continues to load. I can't even stop it.

  Windows Vista Edition Home Premium 64-bit
  Service Pack 2

  Hi inspire them.

  ·         Update is being installed?

  Reset the Windows Update components and check if it solves the problem:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You can also see the following articles for more information:

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

   

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  I hope this helps.

• Windows 8 store does not install any application

  Hello Microsoft. My name is Mikado and I own a dell pavilion g6-2301ax. It comes with a windows pre-installed 8. The problem ive had to deal with is that the store windows does not install any application. After you download the application, it displays a message that the application could not be installed. The same thing happened with the update of windows 8 for windows 8.1.  Could you please help me with how I can solve this problem

  Thank you citrus but it was actually the firewall in my system that it blocked. I had to install the BFE service that does the work. Now I can install any application from the store windows.

• Portege R830 - Windows does not start after I have install Comodo Firewall

  Good afternoon

  I bought today a Portege R830, and after the Windows configuration, the first program that I installed was the popular free Comodo Firewall. After that I restarted, Windows 7 unbootable. It would be stuck on the user login screen and I know it's a problem with the firewall because if I do a system restore to the restore point created by Setup of firewall, windows restarts.

  So I ask if there is any inconsistency between the firewall and software on the Toshiba. A that someone already had this problem? I tried to solve this problem throughout the day with no results. I even re-installed Windows 7 using the Toshiba Recovery and the problem persists. I really like the Comodo and I want this firewall on my laptop, but Windows does not just start!

  Any help would be apreciated.

  Hi jillefsky,.

  Have you disabled the Windows Firewall before you start with the installation of Comodo Firewall? As far as I know, Portege R830 is delivered with preinstalled McAfee security software and you must remove this program before you install other security tools.

  Generally this has nothing to do with Toshiba and it s advisable to contact Comodo directly. They may know about this so they can give you a proper answer.

  But I put t understand why this program is so important to you. Windows already has an internal firewall so that these programs are not necessary in my opinion. Just install a good antivirus like AntiVir and enable the automatic updates of Windows. All that s!

• Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install in Windows 7

  I use Windows 7 update.
  Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install. He says 1 optional update is available almost every day, then when I try to install, it does not install and it says that the update is not necessary. Even once when I check updates, it says 1 optional update for the printer is available from Microsoft. And the story continues. I tried to reinstall the optional update, but the same problem persists perennielly

  Is this the driver you are looking for?
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=503519&prodTypeId=18972&prodSeriesId=503548&swLang=8&TaskID=135&swEnvOID=4062

  Looking for HP for the pilot because it is better to get these live drivers from the manufacturer. TaurArian [MVP] 2005-2010 - Update Services

  No, these aren't the droids, uh, I mean the drivers he was looking for.

  In fact, it's better to get the new drivers from the HP website, you will notice the link you provided that the options only are available for this printer under Windows 7 drivers universal. I regularly have problems with universal drivers and strongly recommend to avoid as much as possible.

  I agree with the question of the original poster, which, after more than two years, remains unanswered by Microsoft. It seems that MS has a driver PCL 5 (not universal) updated specific 3015, but it fails to install the Windows Update control panel. I finally gave up on it, right click on the update and selected the option to hide it from view.

  Why bother with a solution when I use the button "Sweep-It-under-the-carpet" practice of Microsoft?

• Windows Update does not install SP3 on Windows XP Pro computers

  I have about 400 computers running Windows XP SP2 withIE 6.  It is set to automatic updates on installed every day at 03:00.  For some reason, SP3 is installed automatically never.  If I run the windows update manaully, it offers me to install SP3.  Is it normal?

  SP3 does not install automatically. It's like IE8.

  Perhaps this may also be of interest:

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  TaurArian [MVP] 2005-2010 - Update Services

• Try to install sp3, but when you restart windows does not restart

  I can't be in the updates because I think that I need sp3.

  I have sp3 on a flash drive and installed but when it

  says to restart it restarts, but windows does not restart.

  I am running windows xp2 and Ie 8.

  Hello

  You can check this link...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-wont-work-after-reinstall-of/6e0d639a-EC79-4296-866f-e337c4679f25?page=2

  ... I suspect that your situation may be the same as BonitaTennis.

  If not, please answer with the details of your PC and to know exactly what happens when "windows does not restart.

  Tricky

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• After installing Windows XP service pack 3, Windows does not start not upward and only able to boot mode safe

  After installation of service pack 3 I try to restart the computer, but I am sent to the screen that allows only "SAFE mode", safe mode with network, etc... Start up.  Windows does not start normally.  Also during the instalation it won't save the backup files msadds... file inetwiz... file inetwiz...

  Hello

  · You receive an error message or error code when you try to start in normal mode?

  · What is the number and the model of the computer?

  Follow the steps below and check, if it helps:

  1 uninstall windows XP service pack 3 from your computer, you can check the link below: how to remove Windows XP Service Pack 3 from your computer: http://support.microsoft.com/kb/950249

  2 start the computer in normal mode, and then install service pack 3 on the computer. Before installing service pack 3 see the link that has steps to take before you install Windows XP Service Pack 3 below: http://support.microsoft.com/kb/950717

• Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

  Original title: windows updates 7

  Updates to the computer have been OK until MS net framework has been improved from 3.5.1 to Ms. Net framework 4 who do not go in. several attempts have been made to install but still got error codes. . Since then, updates only install are removals of malware. Silverlight will not install either.    Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

  I am at a loss... Anly help would be welcome.

  1. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder.
  2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow.

  Press enter

  3. open Control Panel > Windows Update and Windows 10 should begin to download...

  If this does not work:

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Logitech clicsmart 310 does not install on Windows 7

  Original title: logitech clicsmart 310

  I tried to install the required software for that camera, but I couldn't get the camera does not respond.

  I recently installed win 7, but I couldn't install it

  Hello

  1. You receive a code error message when you try to install the software of Logitech camera 310 clicsmart?
  2. Exactly how you try to install the drivers (CD/DVD or download)?

  From my research and the information provided on the site of the manufacturer (Logitech), the software available for the camera is not compatible with Windows 7.

  The driver software is available for Windows XP, Windows 2000, Windows ME and Windows 98

  I recommend to install the camera in Windows XP compatibility mode driver.

  Follow the steps below to do the same.

  Step 1:

  Download the drivers from the manufacturer website link provided below.

  http://www.Logitech.com/en-CA/support/3402?OSID=14&bit=32

  Note: Select Windows XP from the operating system drop-down and download the drivers.

  Step 2:

  Once download you the drivers, install them in compatibility mode.

  Some older programs might run poorly or not at all. If a program written for an earlier version of Windows does not work, you can try changing the compatibility of the program settings, either manually or by using the program compatibility problems.

  Refer to the provided article below for more information on how to run a program in Windows 7 compatibility mode.

  Make older programs in this version of Windows

  We know the State of the question.

• Cannot download mail exoress outlook, error message; This product does not install on a 64-bit platform. It's a new toshiba laptop window 7.

  Cannot download mail outlook express. «product thiis does not install on a platform 64-bit;.» New toshiba / windows 7. pls help

  Outlook Express is not comaptible with win7, until what the mail application you installed?

• How install .man files or other files that Windows does not recognize?

  I found my own answer. I write just in case someone else has a similar problem.

  I tried to install the software on my computer that was supposed to be a "msi" file and installed as a file ".man". Basically, Windows does not recognize some types of codes that install files can install as. Microsoft Help and chat live did not help, so I called my dad and the solution is relatively simple: change the type of file manually.

  1) go to control panel

  (2) search of Folder Options and open it.

  (3) uncheck Hide file extensions

  (4) go to which the file was saved (make a copy of it to the case where)

  (5) change the endpoint in .msi or your type of file of choice

  6} window opens asking if you want to change the file type, and then click ok.

  I hope this helps someone as lost as I was!

  Thank you

  Bradley

  Well, .man is not a valid file for installers type, so now the question is why the hell gave you a .man as installation file first. You can inform the place you have setup of.