Bright screen, the lines and the 17 t-2100 CTO screen LCD replacement

Similar Questions

• Questions about the scale of the DPI and the brightness of the screen on Satellite L350-145

  I'm trying to customize a L350-145 (screen 17 ") to a user who has some problems of Visual discomfort (difficulty with bright screens and small print).

  (1) ease of access of Vista, control panel DPI scale offers two resolutions, 96, and 120. Even the 120 is a bit small for this user, so I put a custom DPI to 144 (150%). However, I anticipate that some applications could not deal with this font size, so I intend to create a second user that the user could switch to which still had the standard DPI setting. However, to try this I find that change the DPI for one user affect the users of the computer. The DPI is implemented by not part of the user profile?

  (2) I set the brightness level to 1 (through power settings). However, even if this is a little live sometimes. Is there another way to lower the brightness of the screen further away?

  Thank you

  2. do you can not go lower. I guess you could buy a filter sieve that filters glare.

• Cannot adjust the brightness of the screen and the sleep will not work Satellite P750/P755

  On my P750/P755 Satellite I am unable to adjust the brightness of the screen.
  I can move the scale but nothing is happening on the screen.

  Also in the last two days not possible in mode "sleep" as it did before, even though I haven't changed anything.

  What did you do with your computer laptop last days?
  On this virtual path, it is not possible to say what the problem is here.
  You have installed updates? I mean all this can happen without reason?

  Have you tried to roll back the OS to an earlier time to check the functionality?
  And Yes, do you use the original pre-installed OS that you got with your laptop?

• Keys (Fn + F6 and F7) function to set the brightness of the screen does not work

  original title: Fn + F6 and F7 to adjust the brightness of the screen does not

  The function Fn + F6 or F7 has suddenly stopped working. It has been fine until now, but when I press on them now, nothing happens. I use a toshiba laptop with windows xp, can provide more information if necessary

  Thank you

  Hello

  1 have had any changes made to your computer before this problem?

  2. What is the number of the model of the computer?

  3. the other function keys work as should.

  Perform the steps mentioned below and check:

  Step 1:

  Check if the problem persists when the computer is in clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Make sure that you put the computer to Start Normal once you have finished by referring to step 7 in the article.

  Step 2:

  I suggest you perform the steps mentioned below and check if it helps:

  http://forums.Toshiba.com/T5/keyboards-touchpads/fn-key-not-working/TD-p/253131

  (Valid for all models of Toshiba laptops)

  If the problem persists I suggest you to contact Toshiba to get help:

  http://Toshiba.com/Tai/support.jsp

  Let us know if it helps.

• I have a aspire 5253, power watch normal bright screen with the logo Acer and F2 set up

  I have a aspire 5253, power watch normal bright screen with the logo Acer and F2 put in place down, but only for a few seconds, then it goes very dark, almost impossible to see what is on the screen, but there is something.

  I connect a monitor to the VGA connector and th PC works fine.

  I've updated the drivers, but it shows always available, as the main screen attached to the was'nt PC he all of a single screen

  to detect not to bring, and isentified on ly show 1 on both screens, PC built in display still very dark, like the backlight is not on

  reboot always perfect watch on the screen for a few seconds then dark

  Thanks for help

  by chance, I moved the cable button / stop for the Office and the screen turned on

  I checked the cable, it was slightly broken by the brokrn hinge

  I just had to cable and now it works fine

• My screen has many small lines and a big black from the top to the bottom bar

  My screen has many lines and then a bar... all black top of 2 "at the bottom of color.

  This alters my view of the screen.   I need help.   Thank you very much

  Hello

  1. when exactly this question produce?

  2. don't you make changes to the computer until the problem occurred?

  3. this happens to you when you work on any specific application?

  I suggest that you install the updated drivers for the video card on the computer by visiting the manufacturer of the video card and check if it works.

  How to manage devices in Windows XP: http://support.microsoft.com/kb/283658

  Hope this information is useful.

• I work on a laptop running XP and I can't find how to adjust the brightness of the screen

  original title: screen brightness
  I work on a laptop running XP and I can't find how to adjust the brightness of the screen. He is not bright enough for the environment, in that I am currently working.
  Any help?

  Look in the BIOS (nothing to do with the operating system) and change first there - so it's also brilliant to (on battery vs. connected to power - these settings, you determine thus.)

  In Windows - you should be able to control the brightness * if * you have everything installed the appropriate drivers for your laptop * and * they chose to give you these controls (the true drivers/software from the video card manufacturer is usually done).

  Also - if the brightness is not sufficient because of the light of the Sun - then by adjusting it can't helped.  Not many mobile consumers have a screen that can be read in the light of the Sun.  There are laptops with special screens for this type of environment.  Crank your brightness might help - but if you do not have an anti-glare screen, etc...

• I have a HP Desktop running windows7 and cannot find a way to adjust the brightness of the screen. Help, please

  The monitor is a HP backlit. I can use the buttons on the monitor to display its menu at the bottom of my screen, but have not found a way to combat it. The cursor will not appear on the top of the menu display. I may need to use a combination of keys, but just don't know.

  There should be a button on your monitor, you can push to adjust the brightness, contrast, height, width, and other things too.  Since it is different from one monitor to the other, you will have to consider to make it in the documentation on the monitor, the monitor, or on the web site of the manufacturer of the monitor.

  Good luck.

• Graduated filter: on the screen, I do not see 3 lines and a point. It applies the gradient between the middle and it affects the entire slide

  Graduated filter: on the screen, I do not see 3 lines and a point. It applies the gradient between the middle and it affects the whole slide.

  Please help me

  Press H

• Cannot adjust the brightness of the screen after Windows 8.1 update

  Hello

  After you have installed Windows 8.1, I can't adjust the brightness of the screen more.  I checked and updated all the drivers and nothing helped.  There used to be a brightness slider in the control panel in the power settings.  It's over now.  I've looked everywhere for a solution, but I can't seem to find it.  Any help would be greatly appreciated.

  Here are the specs of my computer:

  HP Pavilion 23-F213W Smart Touch

  Windows 8.1

  Thank you

  Many All in One computers are able to use HP MyDisplay in this http://www.portrait.com/dtune/hpc/enu/index.htmlplace.  There is a list of maps videos supported on this page and should help to restore the video controls setting.

• HP 15 laptop: how to adjust the brightness of the screen in windows 10

  Since I've upgraded to windows 10, I have not be able to adjust the brightness of my laptop computer screen because I m not getting is not the option to set the brightness of the screen, or the screen brightness keys Up and Down to work. Also I updated the graphics card and the condotion is always the same... no change!

  Please can someone give me the solution to get rid of this problem

  I fixed that on my envy 15 j151sa-

  Settings > display > Advanced display settings > view the adapter properties

  Then properties > driver tab > Update Driver button.

  Voila!

• want to 4-1112TX: could not set the brightness screen & long power

  Hi, now I use HP ENVY ultrabook TX 4-1112

  I installed win 8.1 to win 10

  any driver has been installed correctly (there no problem in the Device Manager list)

  my problems are:

  -I could not find where I can adjust brightness of the screen, the shortcut key (f2 and f3) without effect.

  -It was perfectly working in 8.1 existing

  -time to market windows / stop take too long. It seems not intel rapid stoarge technology does not work.

  so, can anyone help? because of many ways to solve (from google) does not work.

  Thank you.

  Hi @AgungEnvy,
  
  Please become a member of the HP's Support Forums. I understand that you have a problem with the brightness keys and slow start and stop. I'll be happy to help you.

  HP provides no driver for Windows 10 with this computer. You can try to install the window 8.1 graphics driver Intel high definition (HD). This may activate the brightness function keys.

  You can restore the previous operating system if Windows 10 is too slow for the computer.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Impossible to change the bright screen on Satellite Pro C50-A-143

  I run windows 8.1 and I could not change the brightness of the screen for a while now.

  It happened a few months before, but after a random number of days that it worked again, now it is stuck in about 60% bright max, which is not enough when the sun comes through the window.

  According to the Toshiba Satellite Pro C50-A-143 datasheet this laptop has been preloaded with Win 7 64 bit and Win additional 8.1 own drive was part of the package.
  I assume that you have installed own 8.1 win but have not installed all the drivers Toshiba win 8.1.

  Is this correct?

  Visit the page of the Toshiba UE driver, install all the drivers, tools and utilities (graphic card drivers display tool, driver Toshiba system, etc.)
  Utility function key Toshiba is very important if it is to use the key function (Fn, F1-10)

  Then you should be able to use the function key to decrease and increase the brightness of the display.

• Not ' on' button pressed, then press on + or - keys to adjust the brightness of the screen on HP10BII +?

  Not ' on' button pressed, then press on + or - keys to adjust the brightness of the screen on HP10BII +?

  Just got a new unit, and one of the first things after how to turn it on, in the getting started manual, it's that if we push the button 'On' and then hit the + or - less buttons, it adjusts the brightness of the screen. On my 10BII + does nothing... so I wonder if I have a defective new out of the box. So far, all the rest, seems to work.

  Thanks in advance for everyone would be can confirm it should work.

  I can confirm that the 10BII + adjusting the contrast has very little effect.

  When you look at the screen at a low angle, the number "off" and the lights can be seen to slightly increase & decrease the contrast.

  For normal use, the contrast setting has no useful effect.

  .

• Satellite A660-18 - screen too bright if the update to the BIOS?

  Hi guys, I need your help with this laptop because it gives me a lot of problems.

  I changed the screen of this Satellite A660-18 because one had been installed has been damaged. I installed and works fine but I have problems with the brightness. When I click - on brightness, it goes back and when I click on + it breaks down. It is much too bright and want to do something about it.

  Bios help to solve this problem and how Flash the BIOS on these laptops? I flashed the BIOS on desktop pc but on that I don't see any way to do it. Is it possible to fix the screen without changing the BIOS? Some have said that I have to Flash the BIOS as new screens do not work 100% with old BIOS.

  Help, please

  Thank you

  Hi sky blue,

  You have an original spare part of Toshiba (display) or is it a 3rd party screen? It is important to use the Toshiba spare parts only because they are tested and designed for your Toshiba laptop. If you use 3rd party parts, they may not work.

  The version of the BIOS has nothing to with the brightness of the display and the brightness of the display can be changed with the key FN + F6/F7 combination, but not in the BIOS.