Bringing images of the master page to the front

Similar Questions

• What is the menu item "Bring everything to the front ', and how to use it?

  What is the menu item "Bring everything to the front ', and how to use it?

  It's a selection in the window menu and means to bring all open windows of this application at the front and push all the windows open for other applications behind. This makes access to the easiest application windows. However, if you don't have that one window open in an application, then the menuitem does nothing.

• Copy the image to the front of the file

  Hi all

  Help me someone

  How can I copy the image file to the front through block diagram?

  Best regards

  Iskander

  Hello

  Thank you very much

  all are working

  Respect

  Iskander

• How can I insert a jpeg image in the front panel

  Hello

  I'm new to labview and have written a vi using a data logger NI USB-6008 reading from a sensor that performs a calculation and then displays a value. I am trying to put the logo of our company on the front screen when running, but can't work out how to do it. The logo is a jpeg file.

  I use the trial version 2010.

  Thank you

  Andy

  Hello

  Drag / move your jpeg file from windows Explorer to the front panel of your VI should work.

  Hope this helps

• Place the image on the front in javascript Cap8

  
  Hello

  I have three pictures A, B and C stacked on each other.

  I click three boxes clickA on bOK, clickC on the same slide as the pictures.

  When you click on the boxes to three click I need the image to move to the top of the stack.

  Is this possible in javascript inside 8 Captivate?

  The project will be published in HTML5.

  Thank you.

  Peter.

  Cardiff, Wales, UK. The sky is overcast and humid with a chance of rain.

  Group 3 images, will be the label of the Gr_Image group.

  Each box click now need an action with two statements (commands):

  • Hide Gr_Image
  • See the surface

  Create a shared action, will have two parameters: the first in this case will always be the Gr_Image group, the second will be the image.

  Apply this joint action to each box of click, the first parameter is always the group, second of the specific image.

  Here are a few articles I wrote on the sharing of the actions (I'm busy with a cookbook on stocks):

  Dare to share - part 1 - Captivate blog

  Dare to share - part 2 - Captivate blog

  Settings of the shared actions - Captivate 7 vs 8 - Captivate blog

  Re-use of stocks shared in other projects - Captivate 7 vs 8 - Captivate blog

• Since Google Inbox or Gmail on Mac OS x using command-click to open a link in a new tab incorrectly brings this new tab to the front.

  Same action on any other site works very well and opens a new page in a new tab without bringing it to the front. You are looking for if there is a setting that needs to be adjusted or if it's something weird with functioning Google Inbox and Gmail. Would love to get this sort. Thank you!

  I think the address of other preferences, named in a similar way, most of the other situations:

  • browser.tabs.loadInBackground = > when you open a regular link in a new tab using Ctrl + click (or right click > open in a new tab)
    • default = true, do not have the new active tab
    • In the page Options dialog box, this is controlled by him "when I open a link in a new tab, switch to it immediately" setting.
  • Browser.Tabs.Load InBackground ofdiversion = > when divert you a new window generated by script in a new tab using Ctrl + click
    • default = false, activate the new tab
  • Browser.Tabs.LoadFavoritesInBackground = > when you load a bookmark in a new tab using Ctrl + click (or right click > open in a new tab)
    • default = false, activate the new tab

• The default answer of quiz, display the image (with the correct answer)

  Hello guys, I have trying to find a way to be more efficient to work with a corresponding question. It works like this:

  (1) the user must match parts of a chart labels.

  (2) if the answer is incorrect, I want to show the graph with labels in the right place.  A comments box is not effective to show that, since the feedback box shows only the text.

  I have experienced by:

  (1) adding a "in case of failure quiz" show "Graphic". the graphic appears, but the object appears in the options and the boxes of the corresponding question. There is no option to bring graphics to the front of question items.

  (2) adding another slide and "failure of the quiz", an offshoot to the users of this slide. for example:

  question 1-> slide with feedback for wrong answer-> question 2

  If the user moves forward to question 2 and then goes to the rear, they see the slide with feedback for the wrong answer. I don't want that. I want to slide with feedback to be hidden.

  Any ideason how to solve this dilemma. There must be a way.

  Thank you

  Hello

  I know that you believe that the legend of the feedback is not sufficient to accomplish this, but give it a try.

  Compose the image that you want. Then save it on your hard drive. Now change the caption failure feedback. Select and delete all the text. Now click on the legend drop-down Type and scroll down and choose . This should allow you to browse your file system. Search for and select the image that you saved.

  A couple of notes on it.

  1. The selection dialog box will appear initially only allow you to choose. BMP files. If you need to see. PNG or. GIF or another extension, simply type *. PNG or anything else in the file name field and press ENTER to see the files of this type.
  2. When the legend is displayed on your question slide it will be probably be sized as it was before. This will offend some things terribly. So, you'll probably need adjust the size to see the enlarged image.

  Hope this helps... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• How to center an image in the tab on the front control in LabVIEW 10 (Mac Version)?

  Hello

  I would like to center an image on the front panel. The image is on a tab control that is suitable to the pane. I can't find a way. I work with LabVIEW 10 on Mac. Any suggestions would be very much appreciated.

  Thank you

  Michelle

  You will need to do a bit of math.  Download the locations of the edges of the tab control and image control.  The centers are unlike most high or left half.  I'm not sure without checking, but I think that the values are with respect to the angle of the screen.  Be careful about the origin if you have several displays.  If the differences are odd, you have an error of half of the pixels.  From the positions of the centers, you work towards the positions of the top and left edges.  It may take a few tries.  The rectangle Bounds includes the label (I think), so keep that in mind also.

  Lynn

• Set an out point of the clip on the current image in the timeline?

  So here's a scenario: I'm in the timeline and I get to the image I want to be the out point of the clip. Is there a single shortcut keyboard/etc who will succeed?

  I realize I can do this: move one image to the front and then use the cursor to GUI the end point to the thread... but quite frankly, it's boring, but also slow.

  
  

  I am a user of FCP7 who is accustomed to the setting of the read head on the desired image to an exit point, then double click on the clip, it opens in the Viewer window clip on THE SAME CHASSIS OF THE TIMELINE, and then I press the shortcut key to point. If a double-click + a unique key. I'd do this hundreds of times a day. Is there a way to first open a clip in the source window (by double clicking on since the timeline) on the same frame as the head of reading the script? This will be possible that the first time that you open the clip in the source of the timeline window, but it will be "remember" the framework that you left on ypu reboot first... even closing tab of the element in the source window will not change. I realize that there are "gangs and the program source" but which must be addressed by individual video sequence.

  A bit it boggles my mind that it was placed on the default mode, the source window works.

  Or y at - it a keyboard shortcut to make playback of the source head jumps to the corresponding timeline playhead frame?

  double clicking and opening on the same frame are CS2 and earlier versions and CC14 only.

  Try to hit W (ripple trim next edition to the read head) the opisit is Q.

• Master page is displayed correctly on some but not all

  I had to happen to a few docs lately. I create the doc... and I add an image to a master page. Then, I attribute the master page to some pages. On some, it is fine. But on one or two, the picture does not appear. It shows the right master page. I can entrust other masters, and they are displayed correctly.  This is something I do regularly, and it is a new issue for me. I can manually place the image on the page, but ask yourself why this is happening?

  Thank you.

  OK, sorry, I see that b is the one that should have the background image. This could be a side effect of having a full-spread image (but that shouldn't be a problem in theory). It is often safer than things to stop at the spine. Céline this you in your master by selecting the image, copy, paste in place, and then crop the first folio so the left edge is exactly on the vertebral column and the bottom copy so the right edge is exactly on the spine (and make sure that you check the numbers rather than relying on the alignment). Make sure that you move or copy - just grip resizing and hover over the edge of the image or use the width field in the control panel with all appropriate reference points.

• Blocks of text in master pages

  I put a block of text or any other image on a master page and it will appear on all normal pages. However I can't use any of these images on normal pages, such as putting the text in them or a picture. I need to create a text block and others on all normal pages each time. I tried clicking on the master text frame in the new Document menu, but it makes no difference. What is the point of putting images on a master page if they cannot subsequently be used? They are intended just to display things like page numbers or chapter heads? I must admit that I am new to ID of Quark.

  On the 'normal' page, to release a master page item, you click on it with the black arrow while pressing Ctrl + Shift (Mac: Cmd + Shift).

  You can now add text to the text frame.

  The advantage of this is that if you change the position or size etc. of the text frame on the master page, all of these images on normal pages will change as well in the same way.

  If, however, you add text to the image on the master page, then all the blocks on normal pages you have overridden and text added to manually will not change.

  Ariel

• Adding new items to a Master Page and share them to existing pages

  I need to include new elements of navigation on the master page and I want it appear on the pages that I have already created. I added the new elements on a layer of their own which is part of the master page, but the layer on the part of Pages... option is grayed out.
  
  
  

  jcbluesman wrote:
  > I use CS4, Jim, and here is a link to the .png
  > ( http://idisk.mac.com/jconstant-Public/deimos.png
  >
  > The 3 tabs right on the master page are ones I am trying to
  > share between existing pages. I created them in PS (also CS4), then imported
  > the .psd in this FW document, if that makes a difference.
  >
  > Thank you,
  > Jim
  >
  OK there are two Associates as I see it.

  Each of your pages is made up of a solid, opaque, for a main image bitmap.
  Master Pages, by default, are at the bottom of the layer stack. Your
  tabs ARE present, you just can't see them because they are covered by
  the bitmap image.

  Assuming that you do not have these page images of the elements multiple objects,
  where you can change the blue background, there are always two things you
  can do, which are pretty easy.

  Go to each page and temporarily lower the opacity of the layer 1.
  Use the marquee tool to draw a selection around the area of the tabs.
  Delete the selection.
  Replace the lay full opacity.

  OR

  Try to drag the master page to the top of the layer stack in each page.
  Hide or remove the master page background.
  This option is a little more complicated, but I've been able to do. Expect that the
  bar black to appear before you release the mouse button. You may need to try
  This a few times before it works.

  HTH

  --
  Jim Babbage-. : Community MX:. &. : Adobe Community Expert:.
  http://www.communityMX.com/
  CommunityMX - free resources:
  http://www.communitymx.com/free.cfm
  ---
  . : Fireworks adobe community expert:.
  Adobe Community Expert
  http://tinyurl.com/2a7dyp
  ---
  . : Author:.
  Lynda.com - http://movielibrary.lynda.com/authors/author/?aid=188
  Peachpit Press-
  http://www.Peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45A8-a70d-4b35fa14c9a4
  Layers Magazine - http://www.layersmagazine.com/author/jim-babbage

• HOWTO put the watermark in the front

  Hi guys,.

  I used the watermark, as shown in the sample script inside script ID (via myDocument.watermarkPreferences...), but the images in the document may hide. You could drive me how to bring it to the front, please?

  THX,

  D.

  In the WatermarkPreferences , there is a property called watermarkDrawInBack, which could be set to false (I think it is set to true by default).

  Try this (untested):

  app.documents[0].watermarkPreferences.watermarkDrawInBack = false;
  

  If you mean the DocumentWatermark.jsx of the Scripting Guide of the SDK script, simply change line 23 of the code:

  myDocument.watermarkPreferences.watermarkDrawInBack = false;
  

  Uwe

• Is no longer, I can choose any text, images or tables that I put in a landscape master page that has a different text than the rest of the document stream.

  I tried to follow these steps to set up a master page to landscape:

  http://blog.rockymountaintraining.com/Adobe-FrameMaker-adding-a-landscape-page-to-a-PORTRA TI-document.

  After experimenting with these options, I choose is no longer any text, images or tables that I had put in my new master page of the landscape. The content is somehow now on another layer that I can't.

  Any ideas on how to recover my content?

  Have you added [another] master block of text to the page? If so, you may have placed one above the other. Try to select the main text block and move it slightly to see if you have another below it [who is probably your content].

• "Assignment of a top layer of the object on the master" (master page numbers) I understand the layer must be up to show above images placed on the pages, but how can I do this?

  I have added page numbers to my master pages. They appear on the pages, but I have images on the individual pages which cover the numbers. I understand that I must assign a top layer of the object, but I don't understand how to do it. Please help me? Please explain a just clear as possible, I read the other replies but still do not understand. Wish it was as simple as select object, do a right-click, edit the layer!

  Thank you very much!

  1. open the layers panel (window > layers)

  2. in the control panel menu, choose new layer. In the dialog box, you can name the layer if you like Page numbers.

  3. on your main page, select the text block with the selection tool (black arrow tool) page numbers.

  4. If you now look at the layers panel, you will see a small square right of one of your layers (or 1 layer if you have not created any new layers). Drag instead of the layer of Page numbers. [Explanation: the square is a "proxy" for the selected objects.] [Drag to the other layer moves the objects on this layer.]

  Good luck!