Broadcom BCM43142 802.11 bgn Wi - Fi adapter abandons the connection randomly

Similar Questions

• Desktop Pavilion: Broadcom BCM43142 802.11 bgn Wi - Fi adapter

  My network drivers refuse to work. According to several tests of my motherboard has the Broadcom BCM43142 802.11 bgn Wi - Fi adapter. I don't find this driver in the list of drivers that Windows 7 Professional provides. Any help?

  Try the followng driver

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails?javax.portlet.begCacheTok=com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken & javax.portlet.prp_bd9b6997fbc7fc515f4cf4626f5c8d01=wsrp-navigationalState%3DswItem%253Dob_133353_1 & javax.portlet.tpst = bd9b6997fbc7fc515f4cf4626f5c8d01 & ac.admitted = 1408132369702.876444892.492883150

• HP ENVY notebook - 15 t-ae100 c: cannot find a driver Windows 7 x 64 for Broadcom BCM43142 802.11 bgn adapter Wi - Fi m2

  Hi all
  I recently bought Notebook HP ENVY - 15 t - ae100 (ENERGY STAR) computer CTO laptop and installed Windows 7 x 64 Pro on this subject. I found almost all of the drivers for this computer except for Broadcom BCM43142 802.11 bgn adapter Wi - Fi m2:

  Hardware ID:
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C & REV_01
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C
  PCI\VEN_14E4 & DEV_4365 & CC_028000
  PCI\VEN_14E4 & DEV_4365 & CC_0280

  Can someone help me with this?

  Thank you!

  Hmmm...

  See if this driver works instead.

  The package contains the Broadcom wireless LAN drivers and utility which are required to enable the LAN adapter wireless Broadcom integrated into laptops supported that run an operating system supported.

  File name: sp70888.exe

• Problems with wifi: Broadcom BCM43142 802.11 bgn adapter WiFi in Windows 10 Pro

  Hi, I have some problems with my laptop wifi card. Product of my cell phone number is: L8R39AV.

  Therefore my main problem in my laptop that my wifi card is a bit faulty. Defective in this sense, it is slow compared to the connection with the wired ethernet connection. To better understand you, I also did a speed test with the wired connection and the connection of the wires.

  The results are:

  1. Wired ethernet: download 25 + speed, download speed 3 +.
  2. WiFi wireless: download 15 speed, download speed of 2.

  I could use the ethernet, but my room is very far from the internet connection...

  Need help please!

  Thank you

  Pavan

  Hello:

  Have you tried the latest Broadcom wireless lan driver for your laptop?

  This package contains the Broadcom Wireless LAN drivers for the laptop models running a supported operating system. Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.

  File name: sp75249.exe

• HP15-ac047tu (M9V07PA): Broadcom BCM43142 802.11 bgn M.2 WiFi adapter

  Hello

  I bought this laptop about 3 months back and recently I found that this WiFi adapter does not connect to the wi - fi 5 GHz network.

  Is this a problem with the card itself as in - is this adapter capable of receiving wi - fi 5 GHz connection and if so, is there a problem with my laptop?

  Thank you

  Mshetye

  Hello:

  There is nothing wrong with your laptop or wireless card.

  This model of card is a single 2.4 GHz single band card.

  Tip: once you see a card with a suffix of bgn, this means that it is a single band card.

  Dual-band cards have a suffix abgn or agn.

  Unfortunately, it seems that it is very difficult to replace the card wireless in your template, or I would have recommended to replace the card with a model dual band which has bluetooth.

  In addition, do the work yourself would void the warranty according to the manual on the section of your laptop user guides.

• 15 K1Y78EA #ABZ ENVI: problem with my wifi Broadcom BCM43142 802.11 Wi - Fi adapter on windows 10 bgn

  Hello
  
  I have a problem with my Broadcom BCM43142 802.11 bgn adapter Wi - Fi because I upgraded my windows 8 to 10

  wifi works fine but then after a while a get on the wifi icon's yellow warning triangle, no internet, reviews
  I have to disable and then enable the adapter to operate again, the same problem, but after a while again accurs

  card driver is updated to the latest version 7.35.275.2, the driver date 02/07/2015 via the HP support assistant

  It says no new updates

  Help, please
  
  Thank you

  Hi @HadjadjTaha,

  Thank you for your inquiry.

  I understand that since the upgrade of Windows 8 for Windows 10 your Wi - Fi works fine, but after awhile the icon won't say no Internet and you will need to disable and re-enable the adapter to regain access to the Internet.

  Would check you this setting.

  • Go to the Device Manager
  • Click the network card to expand the list
  • Right-click on the adapter that is listed and choose Properties
  • Click the power management tab
  • If "allow the computer to turn off this device to save power" is ticked, please remove it.
  • Click OK
  • Repeat the process above listed all types of adapters.

  Here is a link to PC HP - troubleshooting wireless network and Internet (10 windows) that can also help.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts, please click on the Thumbs Up icon below.

  Good luck!

• Atheros AR9285 802.11b/g/n WiFi Adapter does not connect.

  I have a HP DV6 3049tx windows 7 64-bit, which have an integrated Atheros AR9285 802.11b/g/n WiFi Adapter of the for 1 month I am not able to connect to any network if a list of available wireless networks. the error msg that says is Windows is not wheat to connect to the network. My version of the driver is 8.0.0.238. What can be the solution Please HELP!

  Hello harshsinha,

  Take a look at this page http://goo.gl/7sjsm

  All drivers and updates are found on this page. Check inside the Networking section and you will see an Atheros driver

  This document here http://goo.gl/Vnwiu will give a few wireless troubleshooting steps that will help.

  Please let me know if this helps solve your problems.

• Can I put my Broadcom BCM43142 wireless with a compatible ac adapter?

  Hi all

  I got a Sony Vaio SVF15A1C5E 2013 with a Broadcom BCM43142 wireless adapter.

  Searched the forums and found a lot of people ask questions about the upgrade to the compatible adapters but I couldn't find an answer or a discussed topic map Broadcom.

  Y at - it a compatible adapter for my laptop?

  Thank you!

  Mike

  Hi mdebeum,

  Thank you for visiting the Sony community!

  Thank you for your time to post your question here, unfortunately we are unable to confirm that since your Vaio SVF15A1C5E is not an American model , and we do not have the full details on the specifications. It is also possible to upgrade the wireless card, but there is no guarantee that it will work without any problem. Usually, we recommend that you replace the adapter with the same model, only not to be upgraded with a superior specs or different model.

  For further assistance regarding your concern, please recommend to visit our Sony Global Web site for more information on contacting Sony's Support Center in your area at http://www.sony.net/SonyInfo/Support/.

  Kind regards

  Vincent

  If my post answered your question, please mark it as "accept as a Solution.

• My laptop Vista with Atheros AR5007 802. 11 b / g adapter does not connect to the internet using the local area or wireless network connections

  I just bought a new router d-link wireless n for my house.  Connect my Win 7 Desktop, laptop xp to Acer and multitude of other devices, but my laptop Vista with Atheros AR5007 adapter does not connect to internet.  I tried to disable IPv6, defining the name of the network, flushing dns cache, etc..  Nothing will work.  (It would not connect to an another 802.11n router in January either.)

  I get local only on both connections Wi-wired and wireless, no matter what I do.
  I'll send this to my office that I can not connect my laptop to the internet and he does not see the other machines on the network.
  Any suggestions from anyone?  I spent hours trying to solve the problems, now completely stumped.

  OK, here was my fix:

  I tried a lot of things, but they do not work.  I downloaded a 'new' driver of HP - it turns out it was the original with the problem.  I found another one that was about a more recent months, still does not work.  I finally managed to get the atheros.cz driver for my card files.  But they do not have an installation file.  I had to search for each old file in its directory, copy it to another place (to be sure, just in case) and then copy and replace the old file with the new file in the original folder.  Fortunately, there were only 6 files, but it took about an hour and a half.  This isn't a lot of time compared to the 18 or if I was just trying to figure out the problem.  Now, my laptop connects to the internet without problem.
  I had this problem with a router "n" beginning of the year in a hostel.  The guy in the Inn told me that he had seen before once.  It's obviously a common problem with these cards (as seen on the "solutions" online) and Vista.  I'm always hating on Vista after this problem.

• S50-B-12 q - WiFi adapter satellite abandons the connection

  The computer is a brand new Satellite S50-B-12 q.
  Everything seems to work outside the wireless card.

  When I first connect to my home network, it will have an internet connection for about 6 seconds, after which it changes status limited connectivity.

  The network uses WEP for security.
  Several other devices use without any problem.
  I tried everything I could think of:

  * Turning on computer power switch, reset of the card
  * Installation drivers new/rolling back drivers / different versions
  * Adapter enabled
  * Disabled the "allow the computer to turn off this device to save power".
  * Disconnection/reconnection to the network several times
  * netsh interface tcp set global autotuning = disabled / netsh interface tcp show global / netsh interface tcp set global autotuningl = normal
  Replacement of the windows 8, which comes with the computer with Windows 7 (same problem)
  * Troubleshooting with windows

  This is what it looks like when I ping:

  Ping google.com 173.194.32.39 with 32 bytes of data:
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 32ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 1075ms TTL = 57
  Request timed out.
  Request timed out.

  Basically, it works for like 6 seconds as mentioned previously, the ping increases a lot and then the connection is lost. Wired connection works perfectly.

  When I run diagnostics network integrated in windows 7, it shows the following:

  + * ProblΦmes trouvΘs: * +.
  The default gateway is not available/not fixed
  The connection between your access point, router, or modem cable, and the Internet is broken / detected

  I see that you have tried a lot of different solutions, but I put t see no workaround related to the WLan router.

  You said you are using WEP encryption.
  WEP is a very weak encryption standard. Usually its recommended to use WPA / WPA2 standard.
  I recommend you to reset the router back to factory settings WLan.
  Then test connectivity WLan using an open (unsecured) wireless LAN.
  But of course; This must be done only for testing purposes.

  You should also test different channels WLan (1-9). I guess that the Wlan router must contain settings too.

• 700 - 515xt envy: Broadcom 43142 802.11 bgn internal card and 5 Ghz wireless

  Hello

  After purusing these cards looking for an answer I seemed to have stumbled on one. My card is a card of 2.4 ghz and the BGN is really mean 2.4 and if I wanted a double band I needed to have an AGN or similar suffix.

  That said it has been also mentioned that bluetooth is a component of the AGN card. The envy has bluetooth capability as well. So if this isn't the correct card to operate at 5 GHz, can someone from HP recommends a proper map?

  My router is double diffusion (separate names for 2.4 and 5) and passes. I can see the two SSID broadcast on other devices, but not on this computer.

  Any advice would be appreciated.

  Thank you

  Alan in Dallas.

  There is nothing that can be done with your current card. It must be replaced by an adapter Wireless 2.4 / 5 GHz. to remove the old card and replace it with a new mini PCIE half card... or replace it with a full size PCIe... or use a USB adapter.

• HP Pavilion DV6-7070SE: Broadcom 4313 802.11b/g/n abandon the connection lately

  Greetings,

  I'm planing to spend my wlan to 5 GHz because that starts them currently installed connection every few hours.

  Please advise on the correct module (P/N) for the 5 GHz model.

  If not supported, please refer to the best module that corresponds to my laptop.

  Thank you

  Hi @slimmy10 ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion Notebook dv6-7070se and the connection Wireless drop. Before changing the wireless card, I would change the channel on the router. Routers are able to communicate to your laptop on several different channels, and sometimes it helps.

  You could disable IPv6 for the laptop. Some say this helps.

  Solve this problem Microsoft Fix it 50413.

  Here is a link to help as well.

  If you still feel the need to change the card to your laptop wireless. Here is a link to page 52 of your manual for cards supported wireless.

  Hope it will be useful.

  Thank you.

• Where can I buy electric adapt or the connection to the use of the iPhone in London?

  I'm going to London and should be able to charge my phone on their electrical outlets. I guess I just need an adapter. Can you advise me?

  All you need is a wall plug adapter. These are only a little money... you can buy them online, if you have the time. Many airports have stores where you can buy them.  Apple stores sell a world travel kit, but it's quite expensive, the kit provides maps of wall to almost any country in the world.

  I paid $ 64 for mine.

• Atheros AR5007 802. 11 b / g adapter on Compaq Presario A931NR + basic router F7D1301 Belkin v1 (01)

  Hello Support Forum

  Problem with Atheros AR5007 802. 11 b / g adapter on Compaq Vista laptop

  Compaq Presario A931NR + basic router F7D1301 Belkin v1 (01)

  Belkin told me that I should update my Atheros card driver to use WPA/WPA2.  I can only use WEP with the factory installed Atheros AR5007 802.11.b/g WiFi adapter.  Device Manager reports that the driver software for your device is updated.

  Atheros AR5007 802.11.b/g WiFi adapter

  Driver provider: Atheros Communications Inc.

  Driver version: 7.3.201.25

  Driver date: 30/05/2007

  File version: 7.3.1.25 built by WinDDK

  Could there be an update for my Atheros AR5007 802. 11 b / g adapter
  All the answers most welcome

  TIA

  Hello:

  Let's take it from the top...

  I know for a fact that you can get your wireless card to work with your Belkin router. sm09 and others were able to get the same card to work on them.  I have every confidence that you can too.

  No more than I do (other than you perhaps), wants you to be able to connect to the internet as you had planned to in the first place.

  The devil is in the details.

  Here's what I recommend...

  1. Download this driver and remember where you saved it. Do not install it immediately.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99392-1&cc=us&DLC=en&LC=en

  2. go to your network and sharing Center and disconnect your current wireless connection.

  3. go to your device manager, click on the section of the network adapters, and then right-click on your Atheros wireless network adapter.

  4. Select uninstall and then if there is a box to check who says unistall drivers, check this box.

  5 reboot the laptop.

  a. it will detect the card wireless again and can install drivers.  If she did install the drivers, please return to this Atheros device in Device Manager and click on the driver tab, check the driver version and date.

  b. If it is 9.2.0.444 some time in 2011, and then the driver you need to get your adapter to work has been installed.

  c. If the driver is another (earlier) date/version, now, install the file you downloaded previously. After installation, go back and check that the 9.2.0.444 version is now installed. He must have

  6. If the wireless card it does not install when you restart the laptop, now to install the file you downloaded above and check once more to make sure that version 9.2.0.444 is installed.

  7. return to your network and sharing Center and set up your wireless connection as you hear it.  WPA2-Personal - AES.

  8. cross your fingers...

  Paul

• Broadcom BCM943228HMB 802.11abgn adapter Wi - Fi 2 x 2.

  I use a new computer h8 - 1520t.

  My wireless is card is: Broadcom BCM943228HMB 802.11abgn 2 x 2 Wi - Fi adapter.

  This wireless card will work also on the strip of the 5 GHz WiFi?

  My router is only 2.4 GHZ and the band is very too cluttered (heavily used in my neighborhood).

  Thank you.

  Hello:

  Yes, whenever you see a wireless card listed as ABGN, the A lets you know that you can also run it at 5.0 GHz frequency.

  If you see a wireless card listed as BGN, it is a single wireless capable of frequency 2.4 GHz card.

  Make sure you see this description in the device under the section manager network cards not only by reading the specs on the site.