Broken fuze!

Similar Questions

• Sansa Fuze wheel broken

  My Sansa Fuze wheel is broken. There it stuck and didn't budge (does not), so I can't navigate the menu. This makes it essentially useless.  Can it be easily solved?

  The "rocket" is only around the age of 7 months.

  Thank you.

  Call A Technical Support for an RMA possible since it's still under the one year warranty.

• Broken Sansa Fuze

  I went to watch a video and the screen went black, but he remained all black. None of the controls worked so I turned it off. Now I can't turn it on, and nothing works.

  Hold the power button (side) for 30 seconds.  Try again and see if it works.

  If this is not the case, try plug your rocket into the computer and see what happens.

  If this isn't the case, please provide more information, see the FAQ for any questions, you can answer.

• Sansa Fuze 8 G is no longer grateful SanDisk external memory and locks upwards if I try to used.

  I have a G 8 rocket and recently bought a SanDisk 8 GB Micro SD HC.  I had loaded movies and music on the SanDisk via Rhapsody map.   Everything worked fine until a few weeks ago.   My PC no longer sees the external memory through Rhapsody or my counter top.  In addition, if I plug in the card and turn on the "rocket" - it freezes and won't turn on.

  In reading the comments, I have tried the following with these results:

  Re formatted Fuze - still does not recognize external san disk card

  settings changed to PSG - no change of pc or rocket

  changed the parameters of meteorological service of Canada - no change to detonators - pc show an "external drive" additional but unable to do something - States "insert disk" when selected in my computer.

  Not sure if it's the Sandisk 8 gb card or the "rocket".

  The "rocket" lights up normally without the card inserted?

  And you are sure that the card is at bottom, clicked in?

  Can you see if something else will read the card - a cell phone, a camera, your computer through a drive?

  When I had this problem with my rocket I ended up re-formatting of the "rocket", which you say you did.

  You could also put at level or downgrade of firmware by following the instructions in the manual in the Firmware update note: just get the file (if possible x.x.26), unzip and place the fuzea.bin file in the directory root (the Sansa drive letter). He will say that it is the firmware update when you disconnect.

  http://forums.SanDisk.com/Sansa/board/message?board.ID=sansafuse&thread.ID=33874

  And Yes, it could be the card. And it could be the card slot - which is what I thought that my problem is that when I formatted.

  If one is the problem, you will have to replace the broken hardware. But that's what I thought I would have to do until the Format and the fixed firmware my friends, so don't give up yet.

• Sansa Fuze connects, but does not load and does not appear on my computer.

  Hello everyone.

  I have a 4 Gb Sansa Fuze, which is (of course) out of warranty.  I have been enjoying his music for quite awhile and have had absolutely no problems with it until two days ago, when it ran out of battery.  I left it in my car and the next day went to connect via the USB port on my computer.  The sansa has begun with its typical "splash screen" reading "Sandisk Sansa, followed shortly after by a blue moving the ring and the words 'Connected', followed by about a second later"writing", followed by a second. later 'connected'  This is normal for my fuze (that I know).  However, the problem with the logo of the battery in the bottom right of the screen, which normally indicates a small "lightning bolt" next to the battery and it shows the battery 'filler '.  Now it shows only a white empty battery.  There is no bolt of lightning, and there is no charge to the battery.

  I have tried to consider the sansa as a device via "My Computer" and sync in Windows Media Player.  None of them show that I have nothing connected.  The sansa updater doesn't recognize not my rocket is connected.

  I know for a fact that the USB loader is not faulty, as I also have a second Sansa Fuze that connects perfectly and was purchased at the same time.  I don't think that it is the slot USB itself that I changed the port to all others and still did not have a change in the status of my sansa (broken).

  If it helps is that I connect to the computer:

  HP Pavilion m7580n

  AMD Athlon 64 X 2 processor Dual Core 4400 +

  2 GB DDR2 RAM 1.8 GHz

  Windows XP Media Center Edition SP2

  Thanks in advance for any help that can be given...

  also, I would like to apologize if this has already been discussed (I read until my eyes hurt and couldn't find something similar).

  Thanks again,

  Josh

  UPDATE:

  Apparently the good things come to those who wait (and leave that their Sansa rockets connected for days despite the hopes of oinitial n it will load).  Today I woke up and found that my Sansa Fuze, which previously were not load had miraculously blamed himself.  I have unfortunately no idea as to the reason that he works all of a sudden.

  Thanks for your help anyway!  It is good to know that there is a place to come when your Sansa is broken...

  Thanks again,

  Josh

• Fuze is frozen and does not

  Hello

  I have some bad problems with my sansa fuze

  This is the second, which is not verry good work (the first hatd a big issue too... when I pressed everything anything the screen is down)

  now my rocket often gets frozen...

  First it was al ready, so that the battery has been used and closed the "rocket" down (after ca 20 or 24 h)

  then I could recharge the player and all worked normal...

  now, it shows a white screen with a few red and yellow pixels... It turns off, so that I can't do the same thing as befor...

  I've updated...

  I format

  I have reset (up to 30 seconds...)

  but nothing has worked... What do I do? #

  Please help me

  MFG Zian

  PS im German and my English is not very well... hope you understand

  zian wrote:

  Hello

  I have some bad problems with my sansa fuze

  This is the second, which is not verry good work (the first hatd a big issue too... when I pressed everything anything the screen is down)

  now my rocket often gets frozen...

  First it was al ready, so that the battery has been used and closed the "rocket" down (after ca 20 or 24 h)

  then I could recharge the player and all worked normal...

  now, it shows a white screen with a few red and yellow pixels... It turns off, so that I can't do the same thing as befor...

  I've updated...

  I format

  I have reset (up to 30 seconds...)

  but nothing has worked... What do I do? #

  Please help me

  MFG Zian

  PS im German and my English is not very well... hope you understand

  Sounds lie you have one this time with a broken screen. I try and send it back or contact SanDisk.

• Time Machine restore, most of the alias icons are broken?

  I recently restored the system of Time Machine, but my alias (for most) have broken images.  If I copy the aliases, they are all fixed, but I can't do it exactly for each alias on the machine!  Restoration of the alias of Time Machine seems to have the same effect.

  Is it possible for the shot to solve this problem?

  I tried several solutions, compensation resolved cache:

  Deploy sudo rm - rf / *.

  sudo rm - rf ~/Library/Caches/*

  Reset

  If I had known what specific cache which is held the icon broken, images that would have been better.  It turns out that only some of the specific sizes were broken, which explains why the icons seem to appear and then disappear again on another page.

• Sync ITunes broken 12.5.1

  I've also updated my IPhone to OS 10.0.2 lasest and ITunes for 12.5.1 and synchronization is now broken. The phone does not even get detected in ITunes, but OS 10 Windows detects the phone in the Device Manager.

  Get help from this article If iTunes does not your iPad, iPhone or iPod - Apple Support

• Do I lose all the iMessages that have not been delivered to my iphone if I withdraw (from iMessage) my phone number? My current iphone is broken and I am planing to get a new one, with in a few months.

  Do I lose all the iMessages that have not been delivered to my iphone if I withdraw (from iMessage) my phone number? My current iphone is broken and I am planing to get a new one in a few months.

  You may lose everything.  iMessage, like most e-mail services, don't keep permanently undeliverable messages.  They only keep in the short period send queue (I don't know exactly how much time but some Apple tech sites indicate no more than 10 days to two weeks) until they are purged.  That's pretty standard as otherwise, large volume, messaging services would be sitting on tera-bytes of messages not delivered each month.

  You actually have to change my phone number?  If not, let alone sign and only in iMessage when you have the new phone with this set of numbers upward to the service.

• y screen is broken and I don't see how can I unlock my phoneme of display

  1. on IPhone 5 s screen is broken how can I unlock my phone to inport my photos

  Too late now, you need fix the screen first.

• Tie broken in iOS 10?

  Hello

  I just upgraded to iOS 10. When you connect AP mobile using bluetooth, the connection works OK, but fell after a few seconds when the iPhone screen goes into sleep mode.

  WiFi Hotspot seems to work, but I can't connect to my VPN from my laptop. Then my cell phone connection failed attempts to verify my credentials.

  I have another iPhone that always works 9 and all iOS works without problems. I also tried to use different carriers that had no effect at all.

  It seems that Mobile Hotspot is severely broken in iOS 10. Can anyone confirm this or make suggestions how to fix it? I'm really desperate here.

  Thank you.

  Hi persistent presence!

  I see that you are having problems using Personal Hotspot from your iPhone after updating to iOS 10.  I know it's important to have Personal Hotspot works correctly, and I'm happy to offer assistance.  Please try all relevant measures of this article, there is a section which specifically addresses the Bluetooth connections:

  Get help with Personal Hotspot in iOS

  Thank you for using communities of Apple Support.

  See you soon!

• 10 broken iOS Update-home button

  I just did the update ios10 and my home button has been broken for 2 years. His complete the update but its stuck on a white screen saying "press home to upgrade".» I am unable to do this command and I can't seem to restore on my back up to iTunes... Help please!

  Hi kaylabon87,

  If your Home button does not work on your iPhone and you are unable to update or restore your device, the resource below provides a link to contact AppleCare support.

  If you are unable to update or restore your iPhone, iPad or iPod touch
  
  

  Contact the Apple Support if you are unable to update or restore your device with the recovery mode, or you can use the mode of recovery because of the broken or stuck buttons.

  Last modified: Sep 15, 2016

  Take care.

• Apple Watch with broken touch screen

  Hello, community.

  I bought my 42 mm watch with stainless steel on January 4, 2016. And a few weeks ago I damaged it accidentally. Him came bracelet cancelled and the watch fell to the ground. Thus, the glass is broken. Touch screen works, but the broken glass is too high and can damage the fingers.
  On 7 September, Apple announced a new series of Apple Watch 2.

  Is it now possible to give them my watch, pay with a discount and make a NEW APPLE WATCH Apple Watch 2 series, or new sport? without a bracelet, that a case is necessary.

  Hello

  Apple does not currently offer a program of recovery for Apple Watch, whether in work or damaged condition.

  For compensation for your damaged watch, contact the Apple Support (mail service may be available) or make a booking Genius Bar to establish your available service options, the likely time and cost:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  Prices for the United States information service, for example, are available here:

  • https://support.Apple.com/watch/repair/service/pricing

• IPhone broken water

  Greetings,

  I found myself in a difficult situation. Any guidance will be greatly appreciated!

  I own an iPhone 6 s more than 64 GB.  I left the United States on his way to Egypt for the military. During a mode ensures the Kuwait, my phone slipped where momentary I put it and it fell into the water. How I managed to drop into the water in a desert, I don't know. I have not either the AppleCare I told myself that I would take care of it...

  I immediately turned it off. Once I found some white rice believed, I placed the phone in a hermetic bag with rice for 3 days. When I turned it on it worked, but the screen has acted a bit strange. In addition, the speaker was no longer working and the front camera was blurry.  A few days later the screen stopped working. I was able to use find my iPhone to remove the content, but the phone to be was broken. In addition, a piece of rice even managed to get stuck into the headphones Jack.

  I'm looking for "warranty" repair tips from Apple to the subject. Currently, the phone is in route back to Denver where my other significant it will bring in an Apple Store. Because I feel that the phone is quite broken, do you think Apple will fix it for the elimination of the cost of repairs guaranteed $ 329? Or do you think it's too far gone?

  Thank you for your time. Any thoughts would be appreciated. Have a wonderful day!

  -Aaron

  Only out of warranty costs for a replacement. Apple does not repair itself, they replace with a service unit. The service unit will be like new and recovers the rest of your guarantee of origin, or 90 days, whichever is longer.

• my phone broken but I need somehow to support without going into the phone, then how do I do?

  My phone broken LCD and I'm getting a new, but I can't fix my current do not know if my phone is saved one, im. so I can back up my phone without having to inside? If so, how?

  Now that he's broken, it's too late to save it.