Broken HTML in the Blackberry10 Simulator.

Similar Questions

• Site looks good in the preview, but broken HTML page on my server

  I correctly exported other sites and uploaded them to my server, but this site collapses. The CSS has the correct styles but not the positions of the image. The site is at www.drnewtons.com/MDV5/index.html

  The files are in the right place, the permissions to the access of the public... indices?

  I SOLVED IT! Looks like you need to have the elements HTML custom layer for the rest of the drawing or model does not break apart. Tried a couple of times on different designs and this is what works.

• My old broken computer and Ihad my Simulator of flight in this regard. How can it download it again on this one?

  My old computer is broken, and I had flight Simulator on it.  How can I download again on the new computer I have?

  Hi Gmwill,

  You must use a Flight Simulator CD to install it on the new computer.

  However, if you do not, you may get in touch with Microsoft to buy the product.

  Microsoft Flight Simulator

  Hope this information is useful.

• How to install the KEY file in the Blackberry Simulator?

  Hi all

  I developed the Web application using BlackBerry Webworks SDK and emulator Ripple... In that I created the package for Blackberry 6 and previously using emulator Ripple... Now, I have the COD files. Then I downloaded the Blackberry Torch Simulator... So please give the procedure to install COD files on the Blackberry Simulator... Thanks in advance...

  With respect,

  Marimuthu_P,

  Hello

  The Simulator must have a 'File' menu where you can load applications. It works for you?
  http://developer.BlackBerry.com/BBOS/HTML5/documentation/running_your_app_on_a_simulator.html

• How buggy is the Playbook Simulator?

  It seems most of the things I write are causing problems with the Playbook Simulator.

  I tend to write most of the content of the page HTML from JQuery

  The simplest things can cause the Simulator to die

  An example...

  If (Debug) $("#debuglog").append ("attempt to display " "+ sp +")
  ");

  Here, I'm just writing for a div called debuglog so I can see what is happening - sp is a page that I just shot locally via Ajax - must write errors, it's the only way to debug a page.

  Who broke things, by removing the old tag led her to begin to work again in the Phone Simulator

  Still, he does not in the Playbook Simulator - it will work on a real Playbook?

  All the little stupid things that SDK WebWorks complains just work in Android

  Answer to myself for the benefit of third parties

  Buried in the forums, you will find a thread on the Playbook having problems with JQuery 1.5.1

  The solution is simple - downgrade to 1.5.0 or 1.5.2 upgrade when it comes out

  It took me a week to find out what was wrong. All my applications now work simply by changing to 1.5.0

  While the browsers work very well with 1.5.1 the Playbook Simulator is not

  I hope this helps those of you who are also frustrated that I was

• Installation of certificates on the BB Simulator

  Hello

  does anyone know how to install a certificate on the Blackberry Simulator (9000)?

  Thank you very much

  Hello

  You can check this link:

  http://Melick-Rajee.blogspot.com/2009/09/how-to-save-server-certificate-to.html

• How to create a delay between the start of the signal simulated one and the other?

  Hello

  As a first step, I am relatively new to Labview.

  I am trying to use Labview for 2 different output square waves (different frequencies, amplitudes, etc.).  I've implemented 2 signals to simulate different and do them in a While loop, however, when I start the program, I need a square to begin signal immediately and the other to start square waves 2 seconds later.  Any help would be greatly appreciated.

  Thank you!

  A few questions.

  Are these frequencies of associated signals? If so, were they to be "in phase"?   As from one simulation after another, put one start later in a case statement, pass a county of timer to establish the initial start time through the loop, subtract the value of the other in the loop, when the difference is => in 2 seconds, set a real flag and have the second simulation in the real of the structure of the business case.

  Typed too slowly again!

• Broken link on the HP website

  Link on the HP site for the download of HP Vision diagnostic Offline Edition for CD (sp54770) does not work. Where else can that be available?

  Thank you!  Who did the trick.  I forwarded page broken link to the HPO support for follow-up.

• W520 has a broken key on the keyboard. Where to repair?

  W520 has a broken key on the keyboard. Where to repair? It has been bothering my OCD a lot. In addition, my lenovo laptop is still under warranty. Would I be able to get this fix for free?
  Thank you!

  Good day and welcome to the community.

  As you mention that you are still under warranty, I would recommend that you call the Service (info below) to discuss the issue.

  Kind regards.

• PtbyPt filter FIR in the Loop Simulation

  Hello

  Currently, I am trying to simulate the power in my engine when I apply a voltage step for 20 MS for that I intend to use a FIR filter in the control and simulation module that simulates the other parts of the engine.

  However, I have found that the FIR filter seems to be strange behavior. When I change the order of Runge-Kutta 1 simulation to 2 of Runge-Kutta it effects the output of the filter FIR PtbyPt VI. The two attached images show how the results of the convolution of the IR and the tension, the FIR outside the simulation loop filter and FIR filter in a loop using Runge-Kutta 1 are the same. However, the second image shows that the FIR filter in the loop simulation Runge-Kutta 2, has a different answer.

  Why does this happen? As I understand it, the type of simulation should have little effect on the application of a FIR filter based on pt by pt. I have not changed the timestep or other parts of the simulation. I want to use a simulation of order higher than for other parts of Runge-Kutta 1 would be insufficient for the simulation.

  I'm using LabVIEW 2011 SP1.

  Thank you

  Rhys

  When you try to use RK-2 or higher order, the screw that dumped you inside the control and the Simulation loop, by default, they will all run in the "minor" time steps too. In your case, 'two times' which means the VI will be executed each time step.

  To properly configure these screws, you must "right click" on the VI and select "Installation of the Sub - VI node. This will bring to a Setup page that the second half you will choose in 'Type of Simulation Subvi execution' to 'remove' the "Include minor steps" box and press OK. When you do this, the Sub - VI will be annotated on the upper right with blue 'C' and when you run, it should provide a similar result as RK-1.

  Note that in this dialog box, you can also select discreet, which, in many cases, it is the right selection for 'discrete' systems

  I hope this helps...

• Will be the Train Simulator' run on Windows XP Home Ed?

  I have the Microsoft Train Simulator, I bought a few years ago.  Come today through it. in my office, I wondered if it could be run on the pc I have at the moment.   What is Windows XP Home Edition.

  Thanks a lot for your help

  Hello

  I suggest you to stay in touch with the Flight Simulator with the help of the link and check if it helps.

  http://www.Microsoft.com/games/trainsimulator/support.aspx

  Hope this information is useful.

• Configure the playbook Simulator

  Hello

  I just downloaded the playbook Simulator and I see it's a vmx file. I have to pay for a license of VMWare?

  Thank you.

  JB

  You'll need VMWare Fusion on Mac. It requires the license.
  VMWare Player is free for a personal use but Windows only.

• Sencha Touch not displaying icons only not the Playbook Simulator

  I see this weird problem. I wrote a simple Webworks app using Sencha Touch. It works fine on the desktop browser. However, on the Playbook Simulator, I see a few flaws. For example the standard icons not displayed. See the pictures attached to the difference:

  On the Playbook Simulator:

  

  On the desktop browser:

  

  I know that's not a consolation, but when I tried the latest version of PlayBook on the physical hardware toolbar buttons work fine.

  I ran through the example of the kitchen sink and everything is made perfect!

  So know that your problem will be solved in the official v1.0 RTM software version and Simulator.

• How to install the 9000 Simulator in JDE for Eclipse?

  The JDE for Eclipse 1.1 (gold) is not delivered with the 9000 Simulator.

  A reported problem display on a 9000 device so I would like to test the application in this Simulator specific.

  If I use the eclipse Update site and choose a pack of different components (e.g. 4.7.0) and select next, I get an error:

  Cannot complete the install because one or more required items could not be found.
  
  Software being installed:
  BlackBerry Component Pack 4.7.0 4.7.0.46 (net.rim.eide.feature.componentpack4.7.0.feature.group 4.7.0.46)  
  
  Missing requirement:
  BlackBerry JDE Plug-in for Eclipse 1.0.0.67 (net.rim.eide 1.0.0.67) requires 'bundle org.eclipse.jdt.core [3.4.0,3.5.0)' but it could not be found  
  
  Cannot satisfy dependency:
  From: BlackBerry JDE Component Package 4.7.0 4.7.0.46 (net.rim.eide.componentpack4.7.0 4.7.0.46)
  To: bundle net.rim.eide 0.0.0  
  
  Cannot satisfy dependency:
  From: BlackBerry Component Pack 4.7.0 4.7.0.46 (net.rim.eide.feature.componentpack4.7.0.feature.group 4.7.0.46)
  To: net.rim.eide.componentpack4.7.0 [4.7.0.46]
  

  He wants than the JDE for Eclipse version.  Do I have to maintain a separate installation (and therefore separate the project) to 4.7.0 component pack support?

  I found BlackBerry_Simulators_5.0.0.411_9000.exe available for download, but how do I install it is usable in eclipse?  Can I just install it in the right folder, and that everything will work magically? (after working on what the right folder is ofc).

  Or is it simply not possible and I should just run the simulator of 9000 outside any debugger?

  I have not tried. But if you run the Simulator with your application and you have open Eclipse. Trying to debug on this race sumulator: click on the drop down menu on the little green play button and choose "run as" and choose the Simulator running.

• In the standalone Simulator, it shows different languages but not by eclipse

  Dear friends,

  When I run the stand-alone Simulator of the Start Menu, it shows several languages in the 'Options', whereas when I trigger it for debugging of eclipse it shows that two languages, there is a solution for the same, please guide.

  Hello friends I am able to solve the problem:

  Version of Eclipse 3.3

  Simulator: for 8900 and 4.6.166 software version

  (a)

  1. add language like: http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800792/801083/How_To _...

  Note: For Arabic is: net.rim.blackberry.lang.ar

  (b)

  1. in the run-> Debug Configuration-> Blackberry Simulator-> (name of your project)

  2. Select the tab 'Simulator', then in the row underneath 'Advanced '.

  3. check the option «Use custom command Options»

  4. and in the text box for "Customized Command Line" add "/ app-param = JvmAlxConfigFile:8900.xml" (without the quotes)