Installation of certificates on the BB Simulator

Similar Questions

• Cisco ise 1.2 installation of certificates for the issue of cluster ise

  Hello everyone I have a cluster ise 4 devices. 1 main admin/secondary monitor, admin of admin/primary secondary 1 and 2 knots of policy

  I need to install the Cert CA public on them. can I generate 1 CSR on one of the nodes, which includes a San with all the nodes DNS names?

  So get 1 single certificate by the CA and export and import the cert even in all other nodes?

  or do I have to generate 1 CSR for each node and 4 certificates of purchase? Wildcard certificates is not an option. Thank you

  Yes, you are right. The document was created before ISE 1.2. You can generate the CSR from the interface of ISE and add SAN.

  Kind regards

  Jatin kone

  * Make the rate of useful messages *.

• Digital installation of certificates with the private key

  I installation of digital certificates in three servers, each of them with Windows Server 2012 R2 Standard but just in one of them, the private key information remain available after installation. The purpose of these servers is to secure the communication with an instance of SQL Server that is installed on each server

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• installation of virtual pc on W7 error: 0 x 80096002 the certificate of the signer of the message is invalid

  I recently updated my W7 PC to W8

  I would like to install Virtual PC because I have important software that worked on W7 but will not work W8 (I thought wrongly that there was little underlying technical difference between W7 and W8)
  When I run the MSU Windows6. 1 - KB958559 - x 86-RefreshPkg I get this error:
  Windows Update Standalone Installer

  error: 0 x 80096002 the certificate of the signer of the message is invalid
  I really need virtual pc work soon otherwise I'll have to give up on W8 I won't do (even just because I have to spend 2 days of slower, re-installing software!)

  Hi Richard

  Virtual PC is not compatible with Windows 8.

  Windows 8 includes components of virtualization of the Hyper-V that you can use.

  If you have any questions about this item, please ask in the following forum. That's where Hyper-v experts answer questions.

  Virtualization of Windows 8 Forum:

  http://social.technet.Microsoft.com/forums/en-us/w8itprovirt/threads

  Concerning

• Pre complains about SSL certificate on the exchange server

  Hello.  I just got a pre and tries to set up to communicate with an exchnage server.  Pre complains and will not set up the connection with this error message: «"SSL certificate error.» Is the date and time correct? ».  The date and time are correct, but the server is running a self signed certificate.  This causes no problems with iPhones that use a lot of people here.

  How can I fix it?  It is not all parameters for this problem.

  I spent the weekend trying to test and understand what was going on.  I found that if I nominated the e-mail server (name after HTTPS: / / in Setup) the same as the name of certificate displayed in the Certificate Manager (Launcher > Device Info > more info > Menu > Certificate Manager), the error should disappear.  The problem for me was that the name of cert in cert Manager was different from address of mail server (in my case server. [domain .local] instead of mail. ([Domain_name] .com).  The transformation it seems to use is:

  (1) find the certificate...

  (2) CN is HTTPS: / / in the installer?

  (3) If no, use error 'Verify the certificate, date and time not correct' (or whatever it is) - If Yes, go to HTTPS: / /.

  (4) Exchange requires safety pin?  If no, proceed to synchronize - if so, use error "unsupported of security policies.

  So I looked more closely CERT and it held several common names (CN) for the cert.  It seems that ANY OTHER DEVICE can filter through the list of common names, and use the one that works.  The Pre uses only (whether first or last, I don't know).

  So, there are two options for the certificate problem (I guess the 3rd is that you can return the phone):

  FIRST SOLUTION

  =====================

  (1) check the name of cert in cert Manager.

  (2) if it is a name that can be resolved DNS (i.e.  [mail]. [mywebsite]. [com]) then change this setting in your exchange installation program in the mail server field beside the HTTPS: / /.

  This will only fix it if your COMPUTER administrator has with permissions on the used field.  It is possible that an alias is used on other areas

  SECOND SOLUTION (as I have done)

  =================================

  (1) ensure that your Certification Authority is installed.  You can do it by clicking START > ADMINISTRATIVE TOOLS > CERTIFICATION AUTHORITY - OR - on a computer on your network using IE/Safari/Firefox and typing http://server/certsrv.  If the page is found, then you are installed, if not, then you will need to have installed.

  NOTE: SBS 2003 WILL AWARD A CERT TO THE IIS WITHOUT THE ROOT CA.  THIS SEEMS TO BE THE PROBLEM WITH THE AUTO CERTS GENERATED I HAD

  (2) If you have not installed it, go to this topic, it is well written to get step by step instructions how to install, create demand for cert, create the cert and install the cert (it took me about 30 min).   http://www.MSExchange.org/tutorials/SSL_Enabling_OWA_2003.html

  NOTE: IF YOU ALREADY HAVE A CERT ON IIS, YOU NEED TO REMOVE IT AS IT IS "DEFECTIVE" CERT BEFORE YOU CAN REQUEST A NEW CERTIFICATE.  YOU MAY BE ABLE TO REINSTALL OVER THE NEW CERT, BUT I DON'T KNOW

  (3) open https://mail.domain.com/exchange on your computer - display details of the cert and save the file on your desktop - if you are using a laptop, you can also install it on your laptop to use for use outside the Office (this is also a good back-up that you can use to get more later if needed again).

  (4) plug your pre in USB mode.

  (5) slide the cert and unplug the USB cable

  (6) go to cert Manager

  7) tap on the icon of "Sun" at the bottom left

  (8) press on the new file cert that you save in USB mode

  (9) to confirm that the new cert appears with the name of the correct mail server

  10) go to the e-mail program and configure the exchange account

  The above will create a REAL root cert (not IIS domain root Cert) that the Pre can work with.

  Really, I don't know that how/why Palm overlooked this possibility because they claimed so-called does not want to sell to companies who need strict security requirements.  For me, it means a small / medium company that has limited IT supports (according to the needs, pay as you or green guy with limited knowledge).  Then, why they test the GER in this environment, I'm not sure.  I bet they were tested on their own network, which has all the correct methods, best practices for the management of cert.  I guess it's like the developers that they have offended and almost lost their support until turned it over and said: 'sorry, we really want make you programs for our platform WebOS. ".  We've just been paranoid for so long salivate us when the bell rings. "They just didn't beta test this well enough.  The sad result of this is that Sprint will have to address all of the sheets because this certificate simple reading process was given only minimal recognition capabilities.

  But having said that - I'm now completely in love with my pre!

  I'm happy to try to help if you need it.  I found a lot of the forum of solutions were not enough detailed, so do not hesitate to contact.

• PtbyPt filter FIR in the Loop Simulation

  Hello

  Currently, I am trying to simulate the power in my engine when I apply a voltage step for 20 MS for that I intend to use a FIR filter in the control and simulation module that simulates the other parts of the engine.

  However, I have found that the FIR filter seems to be strange behavior. When I change the order of Runge-Kutta 1 simulation to 2 of Runge-Kutta it effects the output of the filter FIR PtbyPt VI. The two attached images show how the results of the convolution of the IR and the tension, the FIR outside the simulation loop filter and FIR filter in a loop using Runge-Kutta 1 are the same. However, the second image shows that the FIR filter in the loop simulation Runge-Kutta 2, has a different answer.

  Why does this happen? As I understand it, the type of simulation should have little effect on the application of a FIR filter based on pt by pt. I have not changed the timestep or other parts of the simulation. I want to use a simulation of order higher than for other parts of Runge-Kutta 1 would be insufficient for the simulation.

  I'm using LabVIEW 2011 SP1.

  Thank you

  Rhys

  When you try to use RK-2 or higher order, the screw that dumped you inside the control and the Simulation loop, by default, they will all run in the "minor" time steps too. In your case, 'two times' which means the VI will be executed each time step.

  To properly configure these screws, you must "right click" on the VI and select "Installation of the Sub - VI node. This will bring to a Setup page that the second half you will choose in 'Type of Simulation Subvi execution' to 'remove' the "Include minor steps" box and press OK. When you do this, the Sub - VI will be annotated on the upper right with blue 'C' and when you run, it should provide a similar result as RK-1.

  Note that in this dialog box, you can also select discreet, which, in many cases, it is the right selection for 'discrete' systems

  I hope this helps...

• In my post abouyt the Flight Simulator my question' is the basic version of RC flight simulator manf real flight and sold by the great PlainsManf. Compatable Co. / able to work on my laptop 32 bit HP?

  My previous question was using a Flight Simulator on my HP laptop using Vista. Thanks for the reply, but I guess I have myself not clear. Vista will support the

  Basic Flight Simulator manufactured by Real flight Manf and distributed by Great Plains model Manf. ?

  Hi GoldwingerYW,

  Yes, manufactured by actual flight Flight Simulator is supported by Windows Vista.  For more information I suggest you to contact the manufacturer.
  http://www.GPSoftware.com/
  http://www.GPSoftware.com/realflightbasickb.shtml#installation

  Note: Since the next time try to pursue a particular issue in a single thread and do not create a new thread.

• How to install the 9000 Simulator in JDE for Eclipse?

  The JDE for Eclipse 1.1 (gold) is not delivered with the 9000 Simulator.

  A reported problem display on a 9000 device so I would like to test the application in this Simulator specific.

  If I use the eclipse Update site and choose a pack of different components (e.g. 4.7.0) and select next, I get an error:

  Cannot complete the install because one or more required items could not be found.
  
  Software being installed:
  BlackBerry Component Pack 4.7.0 4.7.0.46 (net.rim.eide.feature.componentpack4.7.0.feature.group 4.7.0.46)  
  
  Missing requirement:
  BlackBerry JDE Plug-in for Eclipse 1.0.0.67 (net.rim.eide 1.0.0.67) requires 'bundle org.eclipse.jdt.core [3.4.0,3.5.0)' but it could not be found  
  
  Cannot satisfy dependency:
  From: BlackBerry JDE Component Package 4.7.0 4.7.0.46 (net.rim.eide.componentpack4.7.0 4.7.0.46)
  To: bundle net.rim.eide 0.0.0  
  
  Cannot satisfy dependency:
  From: BlackBerry Component Pack 4.7.0 4.7.0.46 (net.rim.eide.feature.componentpack4.7.0.feature.group 4.7.0.46)
  To: net.rim.eide.componentpack4.7.0 [4.7.0.46]
  

  He wants than the JDE for Eclipse version.  Do I have to maintain a separate installation (and therefore separate the project) to 4.7.0 component pack support?

  I found BlackBerry_Simulators_5.0.0.411_9000.exe available for download, but how do I install it is usable in eclipse?  Can I just install it in the right folder, and that everything will work magically? (after working on what the right folder is ofc).

  Or is it simply not possible and I should just run the simulator of 9000 outside any debugger?

  I have not tried. But if you run the Simulator with your application and you have open Eclipse. Trying to debug on this race sumulator: click on the drop down menu on the little green play button and choose "run as" and choose the Simulator running.

• Cannot use the browser Simulator

  It's weird. Ago, I installed a simulator of 9000 "BOLD" (4.6.0.126) and have been running and fine Eclipse debugging very well. Today, when I run the Simulator and try to establish a connection through the browser to test an OTA installation, I get an alert: "this is a Wi - Fi service. Please make sure that your device is equipped with an active WiFi connection and try again. "The MDS Simulator is running. I can't connect to any website at all (BlackBerry bookmarks, Google, etc.) with the browser.

  I tried fiddling with mobile phones and wireless networks options ad nauseam. I have re-installed the Simulator. I rebooted my machine. Without success. Other simulators seem to work fine (I can connect using the browser through MDS). It is just this "BOLD" simulator which seems to have problems.

  Any suggestions on how to fix it?

  Two suggestions:

  (a) start the WiFi on the device.  Just use the management of connections, Set Up WiFi and let the search - he wall find a default WiFi Service

  (b) check the default browser.  Options of--> advances... _ the browser.  Make sure that it is browser or BlackBerry Browser and not the HotSpot browser.

  Sounds like you just switched to Hotspot browser by default.  However, I tried just that myself and do not see the same symptoms.  So maybe not.  But anyway give it a try.

• JavaError: "failed validation certificate. The application will not run.

  HI, OTN,.

  1. I uninstalled the EPM

  2. install 11.2.3.500

  3 configuration is complete.

  4. download and install JDK 1.6_45

  5. while I run the Regional service console I get the error message

  JavaError: "failed validation certificate. The application will not run.

  java.security.cert.CertificateException: your security configuration will not allow the authorization of new certificates

  at com.sun.deploy.security.TrustDecider.isAllPermissionGranted (unknown Source)

  at com.sun.javaws.security.AppPolicy.grantUnrestrictedAccess (unknown Source)

  at com.sun.javaws.LaunchDownload.checkSignedResourcesHelper (unknown Source)

  at com.sun.javaws.LaunchDownload.checkSignedResources (unknown Source)

  at com.sun.javaws.Launcher.prepareResources (unknown Source)

  at com.sun.javaws.Launcher.prepareAllResources (unknown Source)

  at com.sun.javaws.Launcher.prepareToLaunch (unknown Source)

  at com.sun.javaws.Launcher.prepareToLaunch (unknown Source)

  at com.sun.javaws.Launcher.launch (unknown Source)

  at com.sun.javaws.Main.launchApp (unknown Source)

  at com.sun.javaws.Main.continueInSecureThread (unknown Source)

  to com.sun.javaws.Main$ 1.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  6 console file is not available "Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\". I missed a step in the installation and the configuration?

  Need help, the team

  Concerning

  Brouwer

  Have you tried to lower the security?

  Check the support matrix - http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html

  

  You can also install the Regional service console

• Renewal of certificate on the notice of security and replica servers

  I want to renew my SSL certificate on my view Security Server version 5.3 (and view replica server).  I used server different to my request for cert, finished the required on this server, and then exported the full certificate with the private key.  I have it imported the VSS and reversed the friendly name of the current certificate to OldVDM and ensured that it was set in VDM.  When I restart services, VMware View security gateway component starts a minute and then stops.  Anyone out there have a better procedure of installation cert or give me advice on what I'm doing wrong.  I also installed the intermediate certificates on the server.

  Thanks in advance.

  So after trying several types of format, I managed to do the work.  I was told to use the PKCS #7 format, however, when you try to do that in IIS it gives you an error.  Also, try to renew the original certificate in IIS gave an error as well at the time of renewal.  SO, what has worked a new cert request, getting the cert to the x.509 format, installed on my alternative server, THEN you can export to PFX format and includes all the correct information.  After that I installed on the VSS and restarted services, which seem to do.

• Unable to connect to the MKS: the certificate of the remote host has these problems:

  Hello

  We have a host of ESXi 4 cluster running any vSphere 4.1.  Recently, I started to upgrade to update 2 and all the additional fixes.  After the upgrade of the vCentre server to the latest version (or maybe before I can't noticed) an of are hosts began to show the following error whenever I tried to connect to the console of any guest on this host.

  Unable to connect to the MKS: the certificate of the remote host has these problems:

  It lists any problems at all and no error display in the event log that it simply does not work.  I had a prod around the internet and found nothing.  I then rebuilt the host to exclude and the problem remains.

  Any help would be much appreciated.

  Thanks in advance

  David

  If you can connect to the Console remotely using VMware Infrastructure (VI) Client connected directly to the host, take a look at vmware KB to connect to a remote virtual machine fails with the error: the certificate of the remote host has these problems

  but more generally - remove host to vCenter inventory and then add the host to the back, take a look at opening in the console of the virtual machine after a new installation of ESXi or ESX fails with the error: the host certificate chain is not complete and could not connect to the MKS: the certificate of the remote host has these problems

• The application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the application author.

  The application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the application author.

  That's what I have I am trying to download adobe programs

  which is not a download error unless you use some sort of download manager/assistant that is also trying to install.  do you have a download manager/assistant?

  or is it an error of installation and, if so, what type of program (name and version) are you trying to install?

• How to add a new certificate to the keystore jre1.6?

  Hi guys,.
  I ' new n in Java programming and I am trying to add a new certificate in the keystore jre1.6 but I am facing a little problem! "When I try to run the below command line, I get this massage.
  The file name, directory name or volume label syntax is incorrect. "
  
  "C:\Program Files\Java\jre6\bin\keytool" - "C:\Program Files\Java\jre6\lib\security\cacerts" - import - keystore file D:\cert.cer
  
  Thank you

  Step 1. change the location

  CD C:\Program Files\Java\jre6\lib\security

  Step 2, certificate of installation by specifying the following settings

  "C:\Program Files\Java\jre6\bin\keytool" - import - trustcacerts - keystore cacerts file - storepass changeit - noprompt-alias codcert1-file D:\cert.cer

  Alias must be unique, you can give a name

  Dinesh

• Windows 7 installs using Bootcamp in the Sierra of the BONE

  Windows 7 installs using Bootcamp in the Sierra of the OS?

  The system requirements for installing Windows 7 is provided here: install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support