Brother HL-2130 printer with my Surface

Similar Questions

• My brother mfc290c stopped communicating with my computer printer.

  My dominsion Dell 2400 has a problem that I managed to install the printer on another computer, tried 3 times to get the cd to run the program through but failed. I could never get that ability to fax printers implemented when I tried I got error message missing fxscfgwz.dll. What is the best way to find & install this file. Also any ideas on why I can't download the original cd installing printer brother mfc290c on my 1st computer? Help!

  Debbe,

  Please see comments from Ian Pugh and then stand out the answer of the "support engineer" as a 'response' - is not the solution to your problems.

  You seem to have a number of problems, but you have not provided all the information to diagnose them.  Please describe what is happening when you try to install the printer. Be as detailed as possible. If you receive error messages, enter them completely, without paraphrasing.

  That said the brother tech was wrong with your computer?  Usually, a technical support uses this kind of pointing the finger when they do not understand the problem.

  You say that you have installed the printer on another computer.  What version of Windows is installed on this computer?  What computer do you intend to keep the connected printer?  Do you intend to share the printer on a local network?

  Please, do the following in order to provide some basic information about your Dell 2400:

  • Click Start, then click Run, and then type msinfo32.exe in the "Open" box and click OK
  • After filled the system information window, click Edit > select all, then click on edit > copy
  • Then paste it (CTRL + V), the copied data in your response here

  What were you doing when you received the error message about fxscfgwz.dll?  Normally, this error can occur when you try to install Windows XP Fax Services - but you should not be done for a device like your brother MFC290c.  Only install you Windows XP Fax Services when you use a fax modem - and your MFC290c is a stand-alone fax machine, not a fax modem.  Part of the software included on the Brother CD-ROM allows you to send faxes from your computer, but it's totally separate from Windows XP Fax Services (I guess it is possible that Brother PC - Fax using some of the files that are normally used by Fax of XP, which is why I asked what you were doing when the error occurred; normally when a third-party software using a Windows file (the file is included in the installation of software package, even if it is 'supposed to be' already available on the computer).

• Brother DCP 145C printer/scanner/fax not compatible with Windows 7?

  My printer works on some days and not others.  When troubleshooting it says the spool service is not not running, but the directions of brother
  Impossible to solve this problem.  If I uninstall and reinstall it says that the drivers do not have download.  If I spend all day on the choice of system restore
  restore points different the printer works sometimes, but rarely the printer and scan at the same time.  The next day, it is generally not
  work after the automatic updates when I stopped, even if they are turned off. My laptop is a Windows 7 64 bit and the printer
  is a brother DCP 145C printer/scanner/fax

  Hello

  Have you checked with the support of brother?

  My personal printer is a brother. However, there are many other good brands like

  HP, Canon, Lexmark, Epson, Kodak and others.

  Rob - SpiritX

• Brother DCP - 150C printer Version 5.11, does not work with windows 7 on my HP laptop

  HI I'M DIETER KING ANOTHER DIFFICULTY I ENCOUNTER WITH MY PC.

  MY LAPTOP HP WITH WINDOWS 7
  MY PC DELL WITH VISTA HOME
  MY PC MEDION WITH XP HOME
  I WOULD ALL WORK TOGETHER IN MY HOME NETWORK, BUT THEY ARE NOT, SETTINGS MICROSOFT WINDOWS DO NOT SEEM TO WORK TOGETHER AND I'M DAILY ONLINE WITH YOUR BUSINESS AND ALWAYS WITH NO DAY ALWAYS HAPPY YET WITH NO PROBLEM.
   
  I WOULD LIKE YOUR HELP TO PLEASE TO SOLVE ALL THESE PROBLEMS, I AM HOME EVERYDAY WITH MY LIMITED MOBILITY DISABILITY IN BED OR WHEELCHAIR DISABILITY, I WOULD APPRECIATE YOUR REAL HELP.
   
  October 2012 I was downloading some free software and I was hacked by a group called Azure computer Comp, who claimed that they were working to solve the problems Microsoft had with hackers who infect their programs with access persons computers viruses. I pointed to your company, I pointed the FBI against online fraud report and my Bank I was riped off the power of the money from my a/c to the Bank of Scotland. In any case now!
  Could you help me directly with my network share domestic and the strength of my pro-sonores all of my 3 computers that seem to be fighting against each other and differences in software.
  I would like to know how to get my BROTHER DCP - 150C PRINTER VERSION 5.11 to BE CAPABLE OF WORKING WITH ALL THE 3 PC
  Thank you
  DIETER KING
  E-mail address is removed from the privacy *.

  Have you installed the printer according to the instructions of brother using the brother cd, or the complete software of brother site features?

  http://welcome.solutions.brother.com/BSC/public/EU/GB/en/model_top/colormfc/dcp150c_eu_as.html?reg=EU&c=GB&lang=en&prod=dcp150c_eu_as

• How to set up Windows Fax and Scan with Brother MFC-7440N printer/all-in-one

  Hello, I'm trying to set up Windows Fax and scan using my all-in-one Brother MFC-7440N printer/fax/scanner.

  When I go into the Windows Fax and Scan menu, I'm going to Fax > tools > accounts Fax. Then I select 'Add '. When he asks, I then select "Connect to a fax on my network server." But I don't know the name of my printer/fax/scanner when he asks "Type the fax server location."
  How to find the name?
  Help, please! Thank you!

  Hello

  You can include the MFC-7440 printer named fax in the \\IP addressname of \\Printer' and check.

• How can I print my Microsoft Surface running Windows 8 RT?

  How can I print my Microsoft Surface running Windows 8 RT?

  Most new wireless printers have an impression of the Microsoft Surface with Windows 8 RT problem.  Everything you need to make these printers is tell them to print and they will.  Older wireless, Ethernet and USB printers should not have driver officially supported in Windows 8 RT, but there is a way to get the printer working.  There are different requirements depending on how the printer is connected to the Surface.

  Note: All the steps below are only for other HP ink Jet, DeskJet, PhotoSmart and OfficeJet printers.  These steps are not for Laserjet printers or printers from other manufacturers.  These steps may not work for all inkjet printers.  If these steps do not work, try different drivers in the list until you find the one that works (you'll understand what I mean once you follow the steps below).  If none of the drivers work, your printer does not work with the Surface.

  For (Ethernet or wireless) network printers, all you need is Surface keyboard or a USB keyboard to connect to the Surface.  It is simply what you have to type more easy to type.  You will also need to have the Surface and the printer connected to the same network.

  1. From the right edge, drag your finger to the left on the screen Surface to appear charms bar.
  2. Press search.
  3. Under the search box, tap Settings.
  4. In the search box, type devices and printers.
  5. Press devices and printers.
  6. Contact add a printer.
  7. Tap "my printer is not listed.
  8. Select the TCP/IP option and then press Next.
  9. Enter the IP address of the printer and press Next.  Note: You can get this from the network printer, or list DHCP in your router Configuration Page.
  10. The Surface will locate the printer and try to install it.  Installation fails, and the Surface will be asked what you want to do, look on the internet for the driver, or manually install the driver.  Choose to install the driver yourself.
  11. Press 'I want to choose from a list of drivers.
  12. If no driver is in the list, make sure that the box next to 'Show compatible drivers' is not checked.
  13. Choose HP in the production list.
  14. Choose driver DeskJet PCL 3 class in the list of drivers.  If this driver does not work, try using the Photosmart PCL3 driver, or the driver Officejet PCL 3.  (Thanks JonW for letting me know about these other alternates.) )
  15. Press Next.
  16. Tap Finish.
  17. Test print.

  For USB connected printers, need you a USB cable to connect the printer to the computer.

  1. Connect the printer to the computer via USB.
  2. Windows will try to find the drivers but will not be able to.
  3. Here Windows may ask you if you want to choose the driver to install.  If she go to step 14 below.
  4. From the right edge, drag your finger to the left on the screen Surface to appear charms bar.
  5. Press search.
  6. Under the search box, tap Settings.
  7. In the search box, type Device Manager.
  8. Press Device Manager.
  9. Tap view and select Show Hidden.
  10. Search for the printer in Device Manager.  It should be in the other devices section with a yellow warning next to her sign.
  11. Select the printer in the list.
  12. Press Action.
  13. Update driver to touch or to install any what it displays.
  14. The Surface will ask you what you want to do, look on the internet for the driver, or manually install the driver.  Choose to install the driver yourself.
  15. Press 'I want to choose from a list of drivers.
  16. If no driver is in the list, make sure that the box next to 'Show compatible drivers' is not checked.
  17. Choose HP in the production list.
  18. Choose driver DeskJet PCL 3 class in the list of drivers.  If this driver does not work, try using the Photosmart PCL3 driver, or the driver Officejet PCL 3.  (Thanks JonW for letting me know about these other alternates.)  )
  19. Press Next.
  20. Tap Finish.
  21. Test print.

  I hope this helps.

• set up a Brother HL2170W to print wireless for Mac book Air

  I have a Brother HL 2170W printer that is able to print wireless.  Having problems becoming it implemented.  Do not know what I do and there seems to be too many options.  Y at - it an easy way to put in place to work with my Mac book Air...

  It took me 6 years to finally make it work on Mac OS X Sierra and Win10 wireless! I used to connect to the router with the Ethernet cable.

  FORGET what brother can offer about the installation, they make unnecessary difficult.

  1. first of all use your connection Ethernet (printer with router) and mark the IP address of the printer: 192.XXX. XX. XX

  2. use any browser, type the IP address in the search bar and press return.

  3. you will be to set up printer Web page, allowing you to make changes: SSID, WAP2 password, etc.

  You will need administrator access to change settings: user: admin password: access (can also be found in 'Help')

  Better to download and install the BRM clear admin tool to find the new IP when a wireless connection for the changes to come.

  The Mac automatically finds the printer and driver.

  Good luck.

• brother printers are compatible with the HP laptop

  My brother MFC-7420 printer is compatible with my new HP laptop? The software is not installed. In fact, any other software, I tried to download from a CD will not be installed. Y at - it secret inatalling software on HP laptop? It was so easy on my old gateway.

  Hello

  Welcome to the HP support forum. Brother printer is not an HP product. Normally the operating system on your computer (any brand) dictates the compatibility, not the brand of the computer. Please download the driver from the following link for the operating system and install on your computer

  http://support.brother.com/g/b/downloadtop.aspx?c=us&lang=en&prod=mfc7420_all

  Kind regards.

• my brother mfc-j410w printer prints blank pages

  my brother mfc-j410w printer prints blank pages... What can I do?

  Hi vitavm9,.

  · Do you remember all the recent changes on the computer before the show?

  · This happens when you print with a particular application?

  · What is the service pack installed?

  · When you print preview the page what is the situation?

  You can run the troubleshooter printer from the link below and check off the results: printing problems and printing errors: http://support.microsoft.com/mats/printing_problems/

  See also: http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/faq/faq/000000/000100/000017/faq000117_001.html?reg=us&c=us_ot&lang=en&prod=mfcj410w_us&Cat=112

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Brother HL-2240 printer will not print after installing Windows.

  original title: MS upgrade on Windows XP

  Help, please.  I installed the recent update of MS for XP and now brother HL-2240 printer will not print.

  KB982670 seems to have something to do with .NET Framework 4 Client Profile.  This update or Windows PowerShell have been updated "critical", then maybe you didn't need to get.  However, it's water under the bridge now.

  When you open the print queue, are shown print jobs as stuck there?  Just to make sure that the queue is cleaned, do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type each of the following commands in the command prompt window and press ENTER after each line

  • net stop spooler
  • del "% windir%\system32\spool\PRINTERS\*.*" {answer Y when prompted}
  • net start spooler
  • output

  It's really only a shot in the water, but he could help and can not hurt to completely uninstall and reinstall the printer.  Follow the directions here: http://www.coribright.com/windows/Article_One.htm

  Get the complete installation package here: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/004500/dlf004515.html?reg=us&c=us&lang=en&prod=hl2240_us_eu&type2=1&os=7&flang=4&dlid=dlf004515

• All-in-one printer, Brother MFC-7840W print mixed fonts unexplained & print formats that appear in documents printed.

  I have problems printing with my Brother MFC 7840W.  The printer has been installed and uninstalled several times and drivers have.  I always have unexplained mixed fonts & print sizes that appear in printed documents.  It doesn't matter whether they are word documents or another program.  It is not the document!  This has been verified repeatedly.  Computer experts maintain that it is a matter of Vista.  Help!

  All-in-one printer, Brother MFC-7840W

  Hello

  • If it works well before?
  • If so, what were the changes made before the issue started?

  You can try to create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Now search for the question.

  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Brother HL 1430 printer driver available?

  My Telechareger Windows 7 x 64-bit home edition has been installed by engineers since then Brother HL 1430 printer will not intall error code 0 x 800 f0214 his disc spring.

  Have you tried all sorts of ways to install of the web no joy before windows 7 has been re - counter without problem the.

  In the menu device and printer, it is considered as controller iee-1284

  I know that it was never easy to install this machine but have always found ways now nothing.

  You don't have to bother with the Brother website

  Any help

  Stephen

  I also tried to uninstall the printer and found a driver for a HL-1230 for Vista 64-bit (I am running Windows 7 64-bit) and installed.  After I restarted the PC, I think it works.

  So I have now two separate "devices":

  -my HL-1030 masquerading as a HL-1230, defined as a printer, and

  -a 'controller', knows it is a HL-1030 but for which there no driver IEEE-1284.

  I think it's the HL-1230, that works, but it would be nice if I could get my hands on a HL-1030 pukka (64-bit) driver so that the computer could stop pretending.

  I dare not change anything at the moment where it stops working...

  Hope this help anyone else having a problem.

• Brother HL 3040CN printer problem - will print in black only

  Brother HL-3040CN printer. Bought new March 2010. 3 spare new brother replaced October 2010 color cartridges. Two/three weeks ago printer stopped printing in color. Reading on printer says 3 color cartridges are empty. Print in black only. Have you contacted Brother Rep., they conducted diagnostic tests via the telephone line and came up with the same conclusion, 3 color cartridges are empty. The printer is to use domestic only, printing envelopes, letters and Internet articles. I do not believe 3 color cartridges have been used in such a short time. Thank you.

  Hello

  The amount of ink consumed depends on the content you are printing. If the color content is high on a few pages then it is possible for the cartridge is empty.

• Windows 7 for Brother HL-1430 printer driver

  Hello

  How can I find and download a Windows 7 for a Brother HL-1430 printer driver without the connected printer? I don't have access to the internet via a Wi - fi hotspot that I don't have a landline.

  Hello

  The Brother HL-1430 printer is compatible with Windows 7 and you don't need any driver to be installed for this printer.

  For more details see the links below.

  http://welcome.solutions.brother.com/BSC/public/EU/GB/en/FAQ/FAQ/000000/002600/000042/faq002642_000.html?reg=EU&c=GB&lang=en&prod=hl1430_eu&cat=109

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=hardware&p=Brother+HL-1430+laser+printer&v=brother&UID=HL-1430&pf=0&PI=0&s=Brother+HL-1430&OS=32-bit

  You can also check the links if you are facing problems with the installation of the printer below

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope that helps!

• Brother MFC-J615W prints & scans through wireless computer, but not the printer itself, error tw006 comes up, how to fix this?

  I tried for several days to get my Brother MFC-J615W do wireless...  I am able to print and scan from the computer but not scan from the device MFC-J615W

  I have:
  Brother MFC-J615W all-in-One
  Windows 7 Home Premium 64-bit
  McAfee Security Center
  Cisco Linksys e2000 router wireless
  I have installed:
  Full driver & software package of brothers website
  ScanSoft Paperport 11SE (scanning software) from the CD provided with the MFC-J615W...
  I tried to scan to Paperport and Control Center 3, but I get the following on my computer when I push the scan button on my printer itself unit...
  Control Center 3-2 errors:
  "Unable to connect to the device.  -If the device is OFF, turn on the device. -Check the I / F cable connection between the device and your computer.  -If the device works on the other post, wait until the task is completed. [TW006]
  "Unable to scan.  Please try to scan the image, once again, if the error occurs again, please reboot your computer and then try to start a new search.  (CC-205-03031f04) "
  PaperPort error: "No Scanner" the default parser is not attached.  Please attach your default scanner or click on the "Select" button to choose another scanner.
  _____________________________
  I can't do anything else in the Control Center 3 but I tried to select the scanner itself in Paperport, which is ' TWAIN: TW - Brother MFC - J615W LAN' a when I hit the scan on the printer, it defines one then the same scan by default to "WIA" error comes again.  Moreover, there is also a ' WIA: Brother MFC - J615W LAN' option in available in Paperport scanners.  The WIA option does not work when I scan in paperport, TWAIN but makes...
  _________________________________________
  I first tried to install the drivers from the CD, but it does work very well so I uninstalled and did a system restore to before that I installed everything...
  Can someone help me?
  Thank you...
  Jesse

  Hello

  1. you receive the error message only when you scan directly from the Brother MFC-J615W printer?

  2. are you able to scan or print from the computer to which the printer is connected?

  If the problem occurs only when you try directly scan at the printer, then I would suggest that you contact the support of brother about the question.

  http://www.brother-USA.com/support/