Brother HL-2240 printer will not print after installing Windows.

Similar Questions

• Windows 8 will not start after installing Windows 8.1

  I have laptop with Windows 8 on the drive (C :), I installed windows 8.1 on drive (d). When I want to choose Windows 8, it didn't start!

  There just restart and ask me to choose again.

  I tried "automatic startup repair" with the DVD but it did not work, I tried this command also:

  Bootrec /FixMbr

  bbootrec /fixboot

  bootrec /rebuildbcd

  Hi Michael,

  I would be grateful if you could help me with more information.

  1. What is the error message accurate/complete that you receive when you try to start Windows 8?
  2. Are you able to boot to Windows 8.1 without any problem?

  This problem can occur because of bad sectors on the hard disk. I suggest you run the disk check and check if you can start Windows 8.

  1. Press the Windows key + X, click on (Admin) command prompt.
  2. At the command prompt, type chkdsk /f and then press ENTER.
  3. Now, type chkdsk/r to repair.

  To run the check disk on C drive, try the following steps:

  1. Press the Windows key + E to open Windows Explorer.
  2. Click the drive you want to check (C :).
  3. Click Properties andcclick on the Tools tab.
  4. Click the control button user error checking.
  5. Follow the on-screen instructions.

  Warning of Chkdsk.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• HP laptop - 14-ac014tx: screen brightness will not work after installing window 10

  I was updating my computer to window window 10 8.1

  But I found that my screen brightnees do not work neither low nor high

  

  

  In addition, my touch of brightness of screen keyboard (F2 & F3) also does not work

  I have no idea how to fix this

  It make me very disappointed because of, I bought the computer in less than 6 months.

  If someone who knew what happens on my computer please help me, it really make me disadvantages

  Hi @weiwei17,
   
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your computer laptop 14-ac014tx HP and questions with your upgrade to Windows 10. Try to use the Windows Update Troubleshooter to fix the problem.

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  HP has worked closely with Microsoft on developing for Windows 10. Currently there is no driver available for your system. You can try and check at a later date, because I see new drivers all the time.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that may need updating.

  Thank you.

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• NDAS services stopped and do not work after installing Windows 8

  Ladies and gentlemen,

  My Services of NDAS stopped and do not work after installing Windows 8. This is necessary to run my SUNGOO LAN hard drive.

  Does sb know what to do?

  Best regards, Rolf

  Hello

  If I understand correctly the NDAS (Network Direct Attached Storage) service has stopped working after the installation of Windows 8. Is this correct?

  Please provide additional information for a better understanding of the issue.

  1 are you faced with the question of the NDAS service on the computer having the hard disk SUNGOO?

  2. how many computers using the hard disk on LAN?

  Specify the computers with Windows 8.

  3 are the computers in a home group?

  Please post the information requested to receive specific troubleshooting steps.

  Other links

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/NDAs-error-wont-see-drive-after-Win7-install/a004b2a3-9dd4-48a1-9ce7-c289931ba17b

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  I hope this helps.

• Satellite P300-1This - Microphone does not work after installing Windows 7

  Hello world.

  At first, I'm sorry for my bad English, so I will say in no time.

  A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

  I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

  Hello

  Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
  Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

  After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.

• Does not fingerprint after installing Windows 7

  I bought 3 items of T500 with installed Windows 7 Home. With this OS footprint scaner worked properly.

  After installing Windows 7 Professinal, fingerprint reader does not work. All instaled divers. There is no error in DeviceManager. But when I run the software of fingerprints, it is said that scanner is not lit.

  Make sure that the installed driver is actually the one that came with the Lenovo Fingerprint Software and not the one that you got from Windows Update. I've seen similar problems several times where Windows 7 is installed and get fingerprints from windows update driver/software and the software Lenovo to fingerprints do not work because some parts of the software, I got from windowsupdate is left on the computer.

  Which version of the driver of the fingerprint reading is installed on your computer?

  You can try uninstalling Lenovo Fingerprint Software and restart. Then, after the reboot if there is still a driver installed for the fingerprint reader in Device Manager, right click and select uninstall and also check the box that says to delete the driver. You may have to restart again. If you had several drivers fingerprint installed you may need to repeat this step twice. So when Device Manager shows the fingerprint with no check reader driver installed if you have any software fingerprint authentec or authentec truesuite installed under "uninstall or change a program". If you find any uninstall and restart. If you can successfully eliminate all the reader of fingerprints in the device should be listed in Control Panel with no driver installed, you should find any substance of fingerprints or biometrics. Then try to install the Lenovo Fingerprint Software.

  -gan

• Reference Dell 926 printer will not print after installing Windows 7

  After the upgrade to Windows 7 my 926 printer will not print. I followed the suggestions found here (unplug the printer on the wall, remove the brick, low load patch R166248 to delete the printer, the latest driver to load, R146832 dated 26/01/07, reboot). Restarts, driver going through complete installation process then I get an error at the end of the process, "the Dell Photo 926 Printer printer driver is not installed". I did this several times. In addition, I restarted the spooler to print several times. No luck. Additional suggestions on how I can get my 926 to work with Windows 7?

  Greg,

  I think that we all regret our first wedding, well most of us.

  Removal of print jobs is a way of really nice to get rid of your documents. After you restart your computer, you should be able to run the fix, Manual printer removal driver and restart once more. Try it to install the Vista drivers in compatibility mode, I used Vista SP2.

  Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Change Vista compatibility. Then, install the appropriate drivers. You will be asked when connect (printer)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  Rick

• OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7

  THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.

  I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.

  Hey 123 problems,.

  You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problems installing HP Deskjet F380 printer after installing Windows Vista Service Pack 2

  OUR SYSTEM: Vista Home PREMIUM "Service PACK 1, 32 - bit, WE installed Service Pack 2, after that, we try to download & install" HP Deskjet F 380 all-in-ONE printer, BUT could not because the installation not completed & failed.

  Original title: having the problem after installing Service Pack 2

  We recovered our system to 'Out of BOX STATE' MEANS that WE BECAME NEW SERVICE PACK 1, WE SUCCEED to INSTALL OUR HP Deskjet F 380 & work properly, YESTERDAY we RECEIVED THIS YEAR IMPORTANT UPDATE IS AVAILABLE THAT IS "Service Pack 2 (KB 948465).

  Please notify can DOWNLOAD us & INSTALL SERVICE PACK 2. WITHOUT OUR INSTALLATION OF THE

  HP Deskjet F 380.

  YOUR ADVICE WILL BE VERY MUCH APPRECIATED

  Hi man chic,

  1. This only happens when you try to install the printer HP or with other programs?

  Step 1:

  Before you install Windows Vista SP2, uninstall completely printing software.

  Check out the link to uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Step 2:

  After installing SP2, try to install the latest version of the drivers available for the printer and the printer and check if it helps.

  Links of HP:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1128296

  http://h10025.www1.HP.com/ewfrf/WC/documentSubCategory?tmp_rule=14481&LC=en&DLC=en&CC=US&OS=2093&Rule=13237&Product=1128296&sw_lang=

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer will not activate after installing XP SP2 repair

  I see a lot of people have posted on this subject, and some have set.  I did a repair of an old computer installation.  At the start, it says I need to activate my copy of XP.  It just hangs.

  I can boot into safe mode (but not with networking).  I followed the 312295 article, which had me do the following

  1 regedit-localmachine-software... - winnt - winlogon - notify delete RESETS (there was none this entry, so I didn't do anything)

  2... regedit wpaevents OOBETimer 'Edit' (don't know what you mean about a hex file editing, so I just delete a line)

  3 renamed WPA.dbl

  4 extended wpa.db_ from wpa.dbl installation disc (ran OK)

  5 looking for any reset5.* or srvany.exe (no current)

  6 restart the computer.

  The same problem.   Still will not start.  Any other ideas?

  Some recommend to replace IE 8.  I'm certainly willing to do that - except my installation disc is a version of SP2.   So, how can I get a version of SP3 to install in safe mode?   (I download from another computer, but I don't know which version to get).

  Why I installed? There was no failure, but because after 8 years of use the computer was bogged down so he could barely work.

  But if this was justified is besides the point, because it is already done.

  I installed SP3.  I Redid the things listed above.

  I still get the message saying to activate windows and it crashes whenever I try.

  So I took the advice of others, installed IE8 in safe mode.  Upon restart, it worked!  (An arisen window asking me to activate, I said yes and it worked.

  This window looked like IE8 material - probably at the heart of the problem.

  Problem solved.

• Can't print after installing windows 7

  I installed windows 7 on 2 different computers that are connected to 2 different printers, the two Lexmark.

  Same problem on both computers.  I can use the "copy" function and printers work fine.  I can print from Notepad.  I can't copy and print on a printer.  I don't know much about computers, but everyone seems to have the same problem.

  A printer is powered Wireless and the other is not.  Lexmark says it's the fault/firewall to the new windows 7.  I've uninstalled and reinstalled the software on each computer and nothing seems to work.

  Can anyone help in plain English?  I'm not computer savey

  Each computer has started with Vista and Windows 7.   I use 32 bit. I'm not network so that each computer is on its own.   HELP Please

  Go to Lexmark > looking for Windows 7 drivers for your printer models > download/save them > uninstall/reinstall instructions of Lexmark printers.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Apps will not open after upgrade windows 8.1

  Microsoft sent me a pop up invitation to upgrade my computer window 8 for windows 8.1 that I accepted and downloaded today. Unfortunately the requests that I had on my windows 8 screen will not open except for requests relating to office 365 and google. Can someone help me?

  I don't have phone customer support Microsoft, who said that they would not help me unless I paid. I bought my computer about a month ago, but they said the warranty was expired for windows 8. I'll take that up with the company that sold it for me. However the fact that Microsoft asked me to upgrade today, that I accepted in good faith, and subsequently my worst computer than before and offering no help leaving me repair free of charge is outrageous.

  The pop up came when I was working on my emails with no other applications open.

  Good news. After turning my computer off at night and restarting this morning all the apps work correctly. Somehow the problem fixed itself.

• iPad 2 will not activate after installing 9.3

  My ipad2 activate after installing the latest update, ios 9.3.  The only option is to return a page to select the wifi.  He let me try again, but the result is always that your ipad could not be activated because the activation server is temporarily unavailable.  Try to connect your ipad to itunes to activate or try again in a few minutes... over and over and over again.

  My iphone6 had no trouble to activate after update.

  I connected to itunes, but it is said that your ipad is not recognizable.  Apple does not know I have crops to harvest, collect and angry birds launched coins?

  https://support.Apple.com/en-us/HT206203

• My Satellite will not start after installing Vista updates

  My Toshiba satellite laptop does not start after the installation of updates. I get the Toshiba screen, then a screen that gives me two options. Start windows normally or repair windows. I tried both but you just Tousez in circles to the same screen.

  I didn't have any rescue CD or save a Vista CD with my computer

  Can someone help me. Do you have ideas how to run again.

  Thank you very much
  Christine

  Hello Christine

  Can you please tell us which laptop model you have?
  Did you start your laptop with F8?
  What happens when you click Repair option?

  Please give us more information.