Browse sequences

Similar Questions

• Help create browse sequences that work and remove sync TOC

  Hello

  I use the latest version of the TCS with RH 9.0. I'm trying to create a release of WebHelp Pro

  for a book produced initially in Framemaker. I followed Rick skinny on skins

  Guide to customize the appearance, but real problems to make my sequence to browse

  to work. I used the tools > Browse, and then create automatically using Frame TOC, sequence editor

  Select the table of contents of the drop-down list and 4 chosen as being the depth I want to browse.

  The table of contents that appears in the browse sequences is strange and does not represent the table of contents of the frame that

  appears in the html code, I left that ' such what. " Once I've produced the navigation sequence output works

  the equivalent of the top level only. What am I am I doing wrong and what I should

  be change to make it fully functional?

  I also want to remove the table of contents of the synchronization of the toolbar, and it seems possible to

  remove the image but not the entire field. I know that this can be done, because of Peter Grainge

  HR site didn't. I will reach between stone and Rick somehow this website for

  my business...

  Thank you very much in advance for any ideas and help.

  Best wishes

  Karen

  Murder off the coast of the research is done through the presentation of the SSL Navigation pane - this is where you select which items you want to show (and in what order).

• Browse sequences option is grayed out

  Hi all
  When I use the wizard to configure my output to generate the option browse sequences is grayed out. The box is in the second window of the Wizard under the view of additional Options.
  
  The navigation for Next, Previous, and Sync TOC in the webhelp output buttons are not displayed. However, the close nav pane appears and works very well.
  
  Is it possible that I can activate the navigation options in the output?
  
  Thank you
  -Azi

  Hi, Azi

  In addition to Peter offered that my dear colleague, you can check the link below:

  Click here to view the page

  See you soon... Rick

• Need a sample RH11 Webhelp output with categories and browse sequences...

  I am looking to test a plugin (of sorts) with any HR 11 Webhelp output that uses categories and browse the sequences. A Webhelp output from the sample project Salesbuilder 2 would suffice. I won't buy another version of HR for a trial.

  If someone could post a file zipped from the release of somewhere, or send it to the email address on my profile, it would be extremely useful.

  Thank you

  Roger N.

  I have them wrapped in beautiful jackets of WinZip and sent them via wetransfer.com

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Browse sequences at merged WebHelp

  Hi all
  
  I'm working on a merged WebHelp project and I noticed that in the output of the navigation for each child project sequence is treated individually. Otherwise said, there is a full stop at the end of the sequence of navigation for each child project and I have to select the first topic in the next draft of the child within the table of contents for this sequence to browse. Is there a way to integrate them so that sequences of travel are managed consecutively?
  
  Either incidentally, did someone else noticed a delay in loading the table of contents in Firefox when one of the results of the project of the child is missing? This help file contains information for the 3 software separate, but related, users can have between 1 and 3 products (and, as a result, between 1 and 3 of the child of the help files) on their machine. If anyone has any ideas on how to launch Firefox by displaying the table of contents in a more timely fashion, I'd like to hear them!
  
  Thank you
  Melinda

  I noticed that even if the evolution of the refresh rate solve the problem of load, the table of contents are not autosynchronising immediately. It starts to sync after the user has clicked on certain topics, but it is not really satisfactory. I found an alternative method.

  Delete the redirect.

  Paste the following above the tag, text by changing the path to the same thing you had in the redirection.

  Change the body as tag below. Change the time-out if necessary, it is set in milliseconds.

  This gives the same redirection but OCD will sync OK. It also works well OK in Internet Explorer.

  See www.grainge.org for creating tips and RoboHelp

• Browse sequences in the merged file?

  * 6 HR
  * Vista
  * Output HTMLHelp (.chm)
  
  Hi all
  
  I want my sequences through displays of my merged .chm files. At the moment the chm file master they are merged shows its own. But only some of the merged files help display their. How would I get them all to appear? I checked the checkbox to enable them is checked in the defined window and this window is used in the master and secondary projects.
  
  Thank you
  
  Jared

  I fixed that. I had to remove and then add in all the TOC references merged for the subprojects in .chm, whereby the PC-DMIS copy these .chms void in my project directory.

• Browse the sequence has stopped working

  I generated WebHelp output files on 19-11-14 (less than 2 weeks ago) in which the navigation sequence works as expected.  When I generated out today, I noticed that the navigation sequence buttons were not displayed.  I use 10 HR with IE 11.  I'm the only person who has access to the RoboHelp project for this project files.

  I checked the WebHelp project settings and noticed that the box "Activate browse sequence" was not checked.  I checked it.  I refreshed the project.  Now, the navigation buttons appear but remain disabled.  I used the sequence editor Browse to regenerate the sequence browse the table of contents.  He has not worked as planned.  Rather than follow the KNOCK sequence, he put all the books first level at the beginning of the navigation sequence, then all second level books and so on.  Anyway, I saved and regenerated the project.  The navigation buttons always appear, but he remained always disabled.  I used the sequence editor Browse regenerated again the sequence of navigation based on the table of contents by using the option to create browse sequences separate for each book to level 5 (just an arbitrary number).  HR, created a bunch of separate browse sequences.  I clicked on OK again and refreshed the project.  I still see disabled navigation buttons, and I tried clicking on multiple subjects in different books to see if all separate browse sequences worked.  The navigation buttons are left disabled.

  I saw HR previous posts on this topic.  I saw the post Julietta Curtis' sequence to browse not working in IE 10 but working in Chrome and Firefox.  I opened in Chrome and Firefox, the latest two versions of the WebHelp I generated; same results as IE 11 - disabled browse buttons.  I opened the WebHelp from 19/11/14 in Chrome and Firefox; the navigation sequence works very well.

  Note: I tried also to regenerate the project using the project. Record of the prior process - including BRS. Files BRS dating back to 10/29/14.

  Any thoughts on how to get the navigation sequence works again?  Thank you!

  I assumed you meant setting up a project pod > Windows > [webhelp window] > properties.  Then I discovered there are two places in the SSL associated with browse sequences.

  There are therefore two actions, you need to take to use a browse sequence.

  1 allow to browse to the output sequences.

  2 specify browse sequence you want to use (you must do this even if you have only currently).

  Where I think you have to do is the second step. You can find it in the SSL under content categories > content. (if you use categories of content, you may have to define for each of them, I guess.)

  

  The word 2013 and RH10, forums indicate that while 2013 is not supported by RH10, by using the right-click > Generate on your print Documentation SSL should allow you to generate the printed output. But some people have failed to get this working, so your mileage may vary. 2013 on Robohelp 10 support Office

• Is it possible to implement the sequences to browse to project with several tables of contents and conditionalized modules

  I use RoboHelp 9 with WebHelp output.

  I have five outings, which one contains help for common functions, while the other four contain help for modules under license. When a user opens a module under license assistance, the user sees the soul help and authorized assistance. In addition, the files are conditionalized so that the unauthorized search a help licensed module brings nothing.

  I have been solving problems with the previous topic and the next topic which, thanks William, I learned are associated with browse sequences. After having tried various configurations, I have a few questions:

  • HR support a sequence to travel alone in a project, even when the project has several outputs & fakes?
  • If HR supports a sequence to browse only, does that mean that there is no way to create a unique navigation for each separate output sequence?
  • If HR supports several sequences of travel, which is the workflow?

  I also maintain a table of 'master' contents which contains all the modules, frequent and without a license. What I've done for now is to autocreate a browse sequence based on the table of contents "master." When I generate the output of a module under license, which is conditionalized, I only see the table of contents for this module and, therefore, can only travel between books and subbooks for this add-on. I also checked that the subjects that do not appear in the module conditionalized as for another module licensed, do not appear in the list of search results either.

  Carol

  Me again, Carol

  You also questions about the functional differences between WebHelp and WebHelp Pro, so let me explain.

  I know only two major differences other than (the additional benefits of analytical feedback reports) and the management of 'Zones' with authentication in RoboHelp Server.

  1. The behavior of browse sequences as explained above
  2. The fact that the categories of content are not supported in WebHelp Pro for this latest version 9.

  In regards to sequences to browse you try to anticipate the various modules (licensed, etc.): multiple browse sequences are included in an single . File BRS. Sequences are defined in the XML code in the single file.

  As a solution (for WebHelp and WebHelp Pro), you could create a Help.brs of the NPM. that you have already created a module; then backup and archive. Then create a change for the different module before generating again. The Help.brs of the NPM. will need to have the same name as your project, so you will have to manage the .brs desired file in the project folder when you build this version. All your other choices (table of contents, Index, conditional tags, etc) remains the same for the respective modules.

  Finally, I notice that you generate apparently WebHelp Pro right now even if you are not published on the server of HR? This is really not the best practice. You must generate WebHelp plain for a web server that has no HR server on it (even if you can be getting away with it). Regarding your concern about "breaking" something; each output is placed in another! SSL! folder automatically when you build, so you should be able to generate WebHelp without interfering with the release of WebHelp Pro. Then, you can republish on the HR using WebHelp Pro Server, whenever the server is ready.

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  Evergreen, Colorado

  www.showmethedemo.com

• Export the sequence XML file browse for use in another project

  When I generate a browse sequence based on the table of contents by using zero for the level of the pound, rather than get A, A1, A2, B, B1, B2, I receive A, B, A1, A2, B1, B2.  The table of contents first crosses all elements of level 1, cycles backwards through all the level 2 element, then 3rd level, etc.

  My solution was to automatically create the sequence to browse at level 0 and then manipulate manually to the output depending on how my readers would actually read my book online (IE A Aa A1 A1a A1b A2 A2a A2b B B1 etc etc).

  Now that I have my sequence in the correct order for this project, I don't want to repeat these steps each time I create a new version of my HLO for the guide even after that a few minor updates have been made to the source of the FM.

  There is a file named whbrs.xml in the output folder and contains the sequence order of travel that I specified in my no workaround.

  Is it possible to export this file to another location for use in another project that references the same guide?

  This methodology is much preferred, as I work at a level of the company with several documents (some numbering in the hundreds of pages) and do not want to have to manually use my solution for each project that I update in the next few years.

  Hi Kristopher

  You probably don't want to use that particular file, because it is an output file. You'd probably have better luck using the file ProjectName.BRS as this one must be a source file.

  However, keep in mind that if (or how) it will work completely will depend on having the recipient project using the same identical structure and identical file names.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Sequence editor to browse

  I'm building a WebHelp tool in RoboHelp 8 for Windows. I have no idea of what browsers will be my users

  use, but we decided NOT to go with a CHM solution for various technical reasons. So, we will send a record subject to htm

  a server location and provide each user with a link to the index file.

  According to everything I read, I should be able to create sequences to browse for my users to follow, but I do not see how this works. When I was building CHM files, it worked great for me, but it seemed to require me to install a special file on each user's PC, which was impossible to do.

  In my pod of single source layout, I choose WebHelp and on the second screen make sure that sequence is selected in the Advanced Options area. In the Tools menu in RoboHelp, I created half a dozen sequences.

  When I generate the webhelp file and open it in Internet Explorer, however, I don't see anything that resembles a browse sequence.

  So what did I do wrong? Or browse sequences not supported WebHelp?

  Thank you.

  Not that I know of. Browse sequences are not widely used today, especially with the release of WebHelp.

• Browse the sequence in RH7

  I created a sequence to browse through the table of contents automatically. I use the skin BeautifulVistas-WH-Generic. I don't have a single button on the navigation pane - touch X. There must be other steps required to produce the navigation buttons, but I can't understand it from the help file.

  Hi harooki2

  Try the following steps:

  Click view > pods > Single Source Layouts
  Double-click the WebHelp layout
  Click the next > button
  On this section of the dialog box should be a check box labeled "Browse sequences. Make sure it is checked.
  Click Finish and you should now see the buttons Browse sequence.

  Sincerely... Rick

• RH9 Windows 7 IE8 OCD and sequence of travel do not expand all topics

  Follow-up procedure Peter Grainge merge help in RoboHelp 8. RH9 installed earlier. Added new topics to the child project. Hung the keys to help programmers. New items appear for their screens. Customer noted that some topics (not all) would not increase the table of contents and browse sequence. It is not either /, they both expand or they do not.

  Browse sequence is based on the table of contents.

  Other subjects in and out of this project are synchronized with the table of contents and expand.

  I deleted the sequence through and based on the table of contents.

  I generated the parent and the child.

  I copied the whdata, whgdata and whxdata records of the mother and the child to the place appropriate to the server.

  Figured it out!  I had not created ID card for the subjects. I created the map ID and breadcrumbs and expanded TOC.

• How to make the script a buttons previous and next to navigate between fields using the navigation sequence?

  I want to put in "next" as well as "Previous section" buttons on the top of my page, aside from the arrows in the table of contents. I put a browse sequence. But I am unalbe to describe the buttons. Can anyone help please.

  Thank you.

  Hello

  You're definitely on the right track. The problem is that you cannot use a path "hard" for images. It may work for the subjects to the root, the directory images can exist. It may not work for the subjects, because the correct path would be something like '... /... / Images /'.

  In addition, you must add the images as baggage files to your project. If you only use the images in a script, RoboHelp does not recognize them as resources.

  I've updated you above the article. He now understands how to use images like browse buttons in the sequence.

  Take a bow

  Willam

• 'Print the sequence' turned on in RH7 Packager for AIR?

  I can't "print the sequence" to activate.  Also, I'm not sure what exactly the 'sequence' which would be printed.  Any topic I navigate to is the 'end' of a browse sequence.  The previous items in the navigation sequence are always records in the table of contents. I don't understand that, other than the subject of the end is never printed.

  Hi again

  You define a sequence through RoboHelp by clicking Tools > sequence editor to browse. You then choose the subjects that are part of each sequence that you set.

  Bread crumbs are based on the path to each subject that based on the Table of contents. In fact, they are calculated by RoboHelp at the time wherever you generate your output.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 days - $24.95! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Help - why print sequence is off the air?

  Hi all
  I have experimented with a copy of the help system a customer at the same time RH7 w/packer and the RH8 trial, generate output for the help of AIR format. After generating & the .air package and look a new help file .exe, I point out the following: click on the drop down next to the icon print and three options are listed (print this page, the sequence of Print, print all help). Whatever the selection below, print sequence is always unavailable (gray). This is the case when I generate with both versions. Did I miss something in the settings?
  Thank you
  Katie
  
  Katie Carver
  Senior technical editor
  Doc-to-You, LLC

  Thank you, Peter & Rick and sorry for posting and before disappearing! (Bill Murphey... begin to solve the problems and a higher-priority task inevitably lands in turn moments later.)

  Rick, your explanation was very helpful to ensure that I had missed something. I didn't, but for some reason, compiling the WebHelp to a different folder did the trick. (I had been doing the active boxes coming did nothing even if I was selecting the subjects that were in the middle of sequences to browse legitimate.)

  Now that I have compiled the WebHelp to another folder, browse sequences work. I ran the new AIR Conditioner (overwriting my existing .air file), and the printing sequence feature also works.

  Thanks again for the troubleshooting help and have a great day!

  Katie