Brush is limited to 90 ° and as a color sampler tool

Similar Questions

• Chart WPF: How to get the limits of PlotArea and axes

  I can't find explicit methods to get limits of PlotArea and axes.

  Please let me know workarounds if they are available. Actually a post explains how to get the PlotArea limits using RangeCursor. Are there alternative means for shafts?

  The photo below shows what I did in WinForms with the methods GetBounds and HitTest. I would like to draw the ornaments on the chart in WPF.

  

  I have attached a code example of this look ornaments around the plot area and the scales.

  Note that this relies on implementation details of the current version of WPF controls for the ornaments of the scale, as it was more effective than gradually points to test in the graph using the GetScaleAt method. We have intentionally left much of the underlying primitive types with a minimum documentation, like us they have changed in the past and may change in the future. Although these exact members can be removed in a future release, we do not expect to provide an equivalent function and stabilize the primitive API over time.

• When you use the brush in the development module and I have a lot less brushes to create an image, the program hangs up to what I sometimes have to use windows to complete the task.  I have ICC Intel i7 3.4 and 16 GB of RAM to operate Windows 7.  Why hang

  When you use the brush in the development module and I have a lot less brushes to create an image, the program hangs up to what I sometimes have to use windows to complete the task.  I have ICC Intel i7 3.4 and 16 GB of RAM to operate Windows 7.  Why hang up LR

  Doing a lot of brushing up on an image using Lightroom is known to have this problem. The first thing to try is to turn off the graphics acceleration (go to Preferences/Performance tab and then uncheck the box here). IF this does not help, then you can consider doing your brush in Photoshop Elements or Photoshop, instead of brushing in Lightroom.

• Pages 5.6.2, cannot highlight and change the color of the text?

  I use pages 4.3 and earlier of passage to 5.6.2 - I just tried to highlight a word in a document and change the color - nothing happened.  Tried selecting the color first, and then type a new Word and that doesn't work either.  Am I missing something?  Is there any quick way to the color of the text in 5.6.2?

  To well highlight a word or a selection of words in the v5.6.2, Pages you will need to select the text, click the image below on the gear watch icon and set the fill color of your character. To remove the highlight, select your text, click in the ink of fill color of characters and click transparency icon in the lower right.

  

• None of my extensions will update and do not appear under Tools. What's wrong?

  I use Windows 7 and the latest version of Firefox 3.6. None of my extensions will update and do not appear under Tools. I use Firefox for years without any problem. How can I access my extensions and how to update?

  Remove files (extensions.rdf, extensions.cache, extensions.ini) extensions.* and compatibility.ini in the Firefox profile folder to reset the extensions registry.
  
  See "extension corrupted files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
  
  If you see disabled extensions are not compatible on the next departure in "tools > Modules > Extensions" and then click "Find updates" to do a compatibility check.

• How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time. Thanks for any help :)

  How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time.  I've just upgraded to El Capitan.  Thanks for any help :)

  I assume that you use the application overview.

  I can't find an answer to back up everything, but a workaround could be while the file menu options are visible, press the option key

  and the point of the window will become close, if you click on that dialogue will ask you if you want to restore the changes or save

  pressing Save will close the image with the changes and then move to the next image and so on.

• Synchronization of the inputs and outputs with different sampling frequencies

  I'm relatively new to LabView. I have a NOR-myDAQ, and I am trying to accomplish the following:

  Square wave output 10 kHz, duty cycle 50%.

  Input sampling frequency of 200 kHz, synchronized with the output that I get 20 analog input samples by square wave, and I know what samples align with the high and low output of my square wave.

  So far, I used a counter to create the square wave of 10 kHz, display on a digital output line. I tried to pull the document according to (http://www.ni.com/white-paper/4322/en), but I'm not sure how sample at a different rate than my clock pulse. It seems that this example is intended rather to taste one entry by analog clock pulse. There may be a way to create a faster clock (200 kHz) in the software and use that to synchronize the analog input collection as well as a slower 10 kHz output generation square wave?

  I eventually have to use the analog inputs to obtain data and an analog output to write the data channel, so I need the impetus of the square wave at the exit on a digital PIN.

  How could anyone do this in LabView?

  Hi Eric,.

  All subsystems (, AO, CTR) derive from the STC3 clocks so they don't drift, but in order to align your sample clock HAVE with pulse train that you generate on the counter, you'll want to trigger a task out of the other. I would like to start by a few examples taken from the example Finder > Input and Output material > DAQmx. You can trigger GOT off the train of impulses, start by Gen digital Pulse Train-keep -you probably already use a VI like this to generate 10 k pulse train. AI, start with an example like Acq Cont & chart voltage-Ext Clk - Dig Start.vi-you'll want to use the internal clock so just remove the control of the "Source of the clock" and it uses the internal clock. From there, simply set the "Source of the command" either be the PFI line generates the meter, or ' //Ctr0InternalOutput '-assuming that you are using the counter 0. You'll want to make sure that the start of the task HAVE faced the task of counter I is ready to trigger off the first impulse. They should be aligned at this point.

  For debugging, you can use DAQmx export Signal to export the sample clock - you can then brought the train line and the PFI pulse to make sure that they are aligned.

  Hope this helps,

  Andrew S

• Zip file and iso LabVIEW FPGA Xilinx tools 12.4 Module is broken

  I downloaded the two zip file of LabVIEW FPGA Module Xilinx tools 12.4 and iso image file three times to make sure that both files are broken and can not be installed!

  

  The size of the file is so large about 3g. It would be better to double-check before you download on the Web site.

  -Very well,.

  The download is complete and the standard Windows Extraction tool worked, WinRAR worked and 7Zip worked (and no, I don't know why, I installed all). I did download a wireless network that does not have direct access to our internal servers, it should therefore be a test valid. If the link I provided above was not that you used (probably isn't, because it is not an ISO option), could you please provide me with a link to the page that you used so that I can test and repair? In the meantime, the link above should work for you.

• Is there an easy way to add text to a chain control / indicator and keep the colors

  Hello

  Bassically I want to add text to a chain control / indicator without losing the formatting of the previous text.

  For a part of a program that I create, data will be transmitted to and from a serial device. I want to display this data in a chain control / indicator and change the color of the text of certain strings depending on data type (sent, received). Basically as a nice log window.

  

  At the moment, I update the chain control / indicator by reading the text and concatenated with the new string. However, this method removes the colors of previous text :-(

  Is it possible to add data to the control of the chain / indicator without losing the text previous formatting?

  I started to create a sub vi who reads a text both character and adds a new element in an array (offset color and text), if the color is distinguished by the previous character. Only problem is it seems to be quite time CPU.

  Thanks in advance,

  Matt

  MattB-5906 wrote:

  Is it possible to add data to the control of the chain / indicator without losing the text previous formatting?

  Actually, no. This means that you will have to use workarounds. Your workaround solution seems a bit involved. Basically, all you need to do is just to keep track of the pairs of end start/selection selection that must be colored in a table. Then just you loop in this table to color the text marked by the power positions.

  An alternative is to use a different indicator. Rather than an indicator of the string, you can use a table with a column. You can then set the foreground color on a cell by cell basis, and add a new line (row) will not affect the coloration of the previous lines.

• CELL FREE AND SOLITARY LOSE COLOR... THEY ARE NOW BLACK AND WHITE... Help!

  HOW CAN I CHANGE THE SOLITAIRE AND FREE OF THE BLACK CELLS CARDS AND WHITE IN COLOR?  thanx

  I don't have to try the solution from Mike again. But just I uninstalled my graphics card and reinstalled again drivers and its good as new. I came here to post the answer, but I was beaten, no worries. No more black white freecel!

• We receive this 0x8000FFF error and we tried the repair tools and it won't make a restore point.

  We receive this 0x8000FFF error and we tried the repair tools and it won't make a restore point. Help, please!

  original title: Please help

  Hi sassi49,

  What are you trying to do when you get the error?

  What version of Windows are you using?

  If this is in reference to Windows Update, see the following article:

  http://support.Microsoft.com/kb/946414

  I hope this helps!

• I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play in 7.__it still doesn't react. What should I do? Please answer__

  I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play at 7.
  It still fails. What should I do? Please answer

  Hello

  a. what game do you have installed?
  b. do you get errors trying to run the game in compatibility mode?

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  1. click on start.
  2. in the search box type eventvwr.msc, and then on enter.
  3. now, click Application in the event viewer (local).
  4. now locate the event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer 
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  You can try to perform the clean boot on your computer and check if that helps.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  To perform a clean boot on a computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
  For more information visit: http://support.microsoft.com/kb/331796

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  To restore your computer to a Normal startup mode, follow these steps:

  1. click on start in the box start the search.
  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  You can check its compatibility with windows 7 in the Compatibility Center.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Hope this information is useful.

• my printer is working, but it will not be printed in color and a new color cartridge is installed.

  HP Deskjet D4160 printer with the Windows XP computer. My printer is working, but it will not be printed in color and a new color cartridge is installed - what can I do?

  The steps in this troubleshooting page can help solve the problem.

• How can I change my task bar background color and the background color of site Web

  How can I change my task bar background color and the background color of site Web

  It is white now and he won't let me see the search fields

  Hello

  Method 1: I suggest you to refer the link below which will help you change the color of your frames of windows, the start menu, the taskbar, and more.

  http://Windows.Microsoft.com/en-us/Windows7/change-the-colors-on-your-computer

  Change the colors on your computer: http://windows.microsoft.com/en-US/windows7/change-colors-on-your-computer.

  Method 2: Try the following steps, which would help you to change the background color of your Web site.

  (a) open Internet Explorer.

  (b) on the Tools menu, click Internet Options, and then click the general tab.

  (c) click on colors under appearance.

  (d) uncheck the box that says use Windows colors.

  (e) then click on background and change the color you prefer.

  General Internet Explorer Settings change: http://windows.microsoft.com/en-US/windows7/Change-Internet-Explorer-General-settings

  Hope this information is useful.

• SE error message: remove and check the color cartrides in HP officejet v40

  Original title: officejet v40

  Can not connect my HP officejet v40. The printer says remove and check the color cartrides I did with no resilts. Please advise me how to do nest?

  Can not connect my HP officejet v40. The printer says remove and check the color cartrides I did with no resilts. Please advise me how to do nest?

  Hey pc owners

  Contact support to the installation of their products Hewlett Packard

  Walter, the time zone traveller