Keystroke logging

With the help of ACS and Ganymede + record keystrokes users type in when they enter the commands on a device such as a router or a switch?

Yes, you can record some commands a user has run on the box of Cisco IOS. For this you must first configure permission to order on the IOS device as well as accounting. Here are the commands that you need.

AAA new-model

AAA authentication login default group local Ganymede

AAA authorization exec default group if authenticated Ganymede

AAA authorization commands by default 0 if authenticated group Ganymede

AAA authorization commands default group 1 if authenticated Ganymede

AAA authorization commands 15 Ganymede group by default authenticated if

AAA accounting command 0 Ganymede group by default

orders accounting AAA 1 Ganymede group by default

AAA accounting command 15 Ganymede group by default

RADIUS-server host x.x.x.x ket

We also configure authorization on the ACS server control using the link below (Note: this link show the example of ACS using PIX configuration, but you can set up the same way IOS devices)

http://www.Cisco.com/en/us/partner/products/sw/secursw/ps2086/products_configuration_guide_chapter09186a00801fd7cb.html

Once we have configured the ACS and IOS devices, you can check the commands run by users in ACS by going to the reports & activities > Ganymede admin logs.

Tags: Cisco Security

Similar Questions

  • Paper key to blackBerry for Blackberry Smartphones?

    I was typing in a number on the phone the other day, and then I pressed the call button so that it registers on my call log and I can add address later but when I went in the call log, the number wasn't there.  I know there are other methods to add information in the phone book but I did this several times before and it worked.  So my question is this - is to go back and see what numbers I entered the phone anyway? Maybe the keystroke log?  And why didn't he record in the call log.  Usually, I press 'call' and he cancel a second later.  I did maybe too fast to register.  Please notify.  It is greatly appreciated.

    Thank you

    Narile

    Hi and welcome to the forums,

    It is not no matter what newspaper of keys, you can have hung-up too fast.

    I used this procedure and have been "burned" so

    Sorry,

    Thank you

    Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you 

  • Unknown user account

    We had problems with our computer, and I was on the phone with Microsoft for 2 hours on 04/06/2013.  She said that if someone had a "password" protect her not access to resolve this type of problem and if I continued to have problems that his supervisor will have to solve the problem.  I saw a user account pop up from time to time and have no idea why or how is added.  The user name was "Unknown account" when I started typing and is now "S-1-5-21-1707336200-2697870300-4147613902-1001" with "special permission".

    When I tried to copy and paste, this is what has been copied.

    \\localhost\C$\@GMT-2013.06.23-11.47.18\Users\Gar-n-Deb

    This all started because even if I was not at home, my husband got a phone call from someone who told him that they were Microsoft and was concerned about the volume of activity, they have seen and could solve the problem, if it was allowed access to the computer and buy software.  He said this looks suspicious and the guy said, I ask only to help you.  Thus, he had access.  The guy had problems with getting their approval on the credit card, but he had already acceded to our computer.  When I got there, I heard my husband say: "well, my wife is home now and I told him look and he hung-up.  We have our phone CASE which is our local supplier and had lost the connection cable, our desktop icons were hidden and I have no idea what else has happened.  Even if one of the owners I have used to work to help me with IT, I'm not at all a computer scientist.  So I called Microsoft and was informed I thought, that Microsoft does not call.

    After my time 2 call with Microsoft, I was monitoring our computer and attempts to change what I thought others prevents access to our computer.  I first noticed that the security of all the icons changed.  I deleted all the icons and then added them back.  After noticing changes more, I then removed remote access.  I don't know how I saw it, but I discovered there where there are 3 home groups.   Now this morning, each file was consulted and specified above user has special permission for everything.

    Maybe I just need to call Microsoft again, but I wanted to at least get this documented.  Please notify.

    Maybe I just need to call Microsoft again, but I wanted to at least get this documented.  Please notify.

    When you give full access by a total stranger on your PC your husband fell for a popular scam. The scammer could easily have installed keystroke logging software. If it was my machine then I would perform a destructive factory restore, if it isn't because I have no desire for an outsider to look over my shoulder when I do my stuff from Internet banking or order via the Internet.

  • Shares in CS5.1

    Heya, I'm editing an action. I'm changing how to move something. I use a mac, I tried clicking on the specific item in the action and the keystroke logging; NO JOY.

    I tried selecting "save again", but WITHOUT JOY. When I click on 'save again', it goes quickly to reord then on record, and then it is back to normal as if she wasn't recording.

    I put in a lot of work on this action, it's a shame.

    The action itself, puts an image as watermark, then move it to the bottom and Center, slightly changing the image with effects, then finally flatten image. Automatic color etc. tone.

    Any ideas what I am doing wrong?

    .

    Right-click on a rule, then assign units of percent.

    Target a watermark layer.

    Start recording the Action.

    Select all (Cmd + A).

    Layer > align layers to selection > horizontal centers.

    Layer > align layers to selection > edges down.

    Drag the watermark until the position while holding down the SHIFT key to constrain the vertical movement.

    Deselect (Cmd + D).

    Stop recording.

    Restore units of the rule for what you want.

    The Action should look like the following image:

  • Went to my new phone sync and my profile name is incorrect by a letter. Also says that my acct name and pass is incorrect when I try to log in as usual. Help

    When you try to sync my new phone android (galaxy S4 to S5 galaxy), my firefox on firefox sync profile name is incorrect by a letter. Instead of kokochako, it reads kokocako. IM concerned because my name and my password is the same that I use to log on to my laptop and my previous smartphones. I can't synchronize my acct or make changes to my profile name. I hit forgot password to reset, but because the email is wrong Im do not receive an email to change. I have not changed my name ever and my password has not been changed in at least 6 months. He repeated my name and pass is incorrect. My account has been hacked or compromised? All my info is still on my laptop, just under the wrong email address, im afraid...

    To answer:
    I'm worried because I can log in using my laptop (of course my good profile and password), but when I click on synchronize the name next to the profile icon is incorrect.



    What version of Firefox are you running on your labtop?
    Also on your labtop when the wrong name appears where you see that name, can you please attach a screenshot? How to make a screenshot of my problem?

    To answer your question about the identity or the keystrokes, you can run a malware scan to search your computer for malware. Regarding the identity, the user with the e-mail address that appears under the wrong name can receive your confirmation email to reset your password and may be confused (assuming that the name is the email that does not display properly)

    To answer your question how sync works when the next to the profile name icon is incorrect. Can also provide a screenshot of it? What is an email? I don't know which menu you're talking about.

    To fix this, you can create a copy of the profile on the laptop, backup and restore Firefox profiles information disconnect the wrong account and add the appropriate account and password.

    How to:

    1. You must disconnect the incorrect account name.
    • Open Firefox with Profile Manager to verify that there are no more than a profile using several profiles
    • Otherwise disconnect the account in the preferences/Options > Sync Menu
    1. Make a copy of the profile with the link above or below
    1. Attach the appropriate account name and synchronize devices or that the account does not have the profile data is in the profile folder. Create a new account with this profile will keep you informed.

    If you have any questions about this, please do not hesitate to ask.

  • With kernel panic issues please help reading log files

    Whenever I plug a peripheral usb Arduino my mac crashes. Here is the log. I can't understand.

    _________________________

    Anonymous UUID: F337CFF1-4204-DF6D-2BD0-B6FDF3953966

    Mon 3 Oct 11:30:17 2016

    Panic report *.

    panic (the appellant 2 cpu 0xffffff801554186b): 'item 0xffffff9202993dee of vm area objects being released taken wrongly zone kalloc.16\n"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3789.1.32/osfmk/kern /zalloc.c:2664 '.

    Backtrace (2 CPU), Frame: Return address

    0xffffff9202823ba0: 0xffffff80154f748c

    0xffffff9202823c20: 0xffffff801554186b

    0xffffff9202823d00: 0xffffff8015a86fe6

    0xffffff9202823d20: 0xffffff7f9643d00a

    0xffffff9202823d70: 0xffffff7f9639600a

    0xffffff9202823d90: 0xffffff7f9639bf9d

    0xffffff9202823e10: 0xffffff8015ac00ba

    0xffffff9202823e80: 0xffffff7f9639b8dd

    0xffffff9202823ed0: 0xffffff7f963a07e1

    0xffffff9202823f10: 0xffffff7f963a053f

    0xffffff9202823f30: 0xffffff8015abd621

    0xffffff9202823f80: 0xffffff8015abcc06

    0xffffff9202823fb0: 0xffffff80154a6af7

    Extensions of core in backtrace:

    com.apple.iokit.IOUSBHostFamily (1.1) [6A671CD8-5527-3A10-8675-1421D158D7A7] @ ffff7f96365000-> 0xffffff7f963ccfff 0xff

    dependency: com.apple.driver.AppleBusPowerController (1.0) [DB526B45 - 1 A 45 - 3A 81 - A0C1-57F826CAD EDF]@0xffffff7f96358000]

    com.apple.iokit.IOUSBFamily (900.4.1) [8F6207EC-608D-373A-B35E-E6578202F58D] @ ffff7f96409000-> 0xffffff7f964a1fff 0xff

    dependency: com.apple.iokit.IOPCIFamily (2.9) [731443D8-78D5-30C8-939A-1ED3E857CA22] @ 7f95d32000 0xffffff

    dependency: ffff7f96365000 @0xff com.apple.iokit.IOUSBHostFamily (1.1) [6A671CD8-5527-3A10-8675-1421D158D7A7]

    Corresponding to the current thread BSD process name: kernel_task

    Boot args: kext-dev-mode = 1

    Mac OS version:

    A 16, 323

    Kernel version:

    16.0.0 Darwin kernel version: Mon Aug 29 17:56:20 PDT 2016; root:XNU-3789.1.32~3/RELEASE_X86_64

    Kernel UUID: 622D2470-C34D-31F9-A62B-6AA9A3C6A3CD

    Slide kernel: 0 x 0000000015200000

    Text of core base: 0xffffff8015400000

    Text __HIB base: 0xffffff8015300000

    Name of system model: MacBookPro11, 5 (Mac-06F11F11946D27C5)

    Availability of the system in nanoseconds: 5562983687

    last load kext to 5127051852: com.apple.driver.ApplePlatformEnabler 2.7.0d0 (addr 0xffffff7f97b15000 size 28672)

    kexts responsible:

    com WCH.usbserial 1

    com Kaspersky.NKE 2.3.1a8

    com Kaspersky.kext.Klif 3.4.2a30

    com.apple.driver.ApplePlatformEnabler 2.7.0d0

    com.apple.driver.X86PlatformShim 1.0.0

    com.apple.driver.AppleOSXWatchdog 1

    com.apple.driver.AppleGraphicsDevicePolicy 3.13.60

    com.apple.driver.AppleHDAHardwareConfigDriver 276.26

    com.apple.driver.AppleUpstreamUserClient 3.6.4

    com.apple.driver.AppleHDA 276.26

    com.apple.kext.AMDFramebuffer 1.4.4

    com Apple.Driver.pmtelemetry 1

    com.apple.iokit.IOUserEthernet 1.0.1

    com.apple.driver.AppleIntelHD5000Graphics 10.1.8

    com.apple.iokit.IOBluetoothSerialManager 5.0.0f18

    com.apple.AMDRadeonX4000 1.4.4

    com.apple.driver.AppleCameraInterface 5.57.0

    com.apple.Dont_Steal_Mac_OS_X 7.0.0

    com.apple.driver.AppleHV 1

    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 5.0.0f18

    com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

    com.apple.driver.AppleSMCLMU 208

    com.apple.driver.AppleLPC 3.1

    com.apple.driver.AppleMuxControl 3.13.60

    com.apple.kext.AMD7000Controller 1.4.4

    com.apple.driver.AppleThunderboltIP 3.0.8

    com.apple.driver.AppleIntelFramebufferAzul 10.1.8

    com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

    com.apple.driver.AppleFIVRDriver 4.1.0

    com.apple.driver.AppleBacklight 170.9.10

    com.apple.driver.AppleMCCSControl 1.2.13

    com.apple.iokit.SCSITaskUserClient 394

    com.apple.driver.AppleUSBStorageCoexistentDriver 404.1.1

    com.apple.driver.AppleUSBCardReader 404.1.1

    com.apple.driver.AppleTopCaseHIDEventDriver 102

    com.apple.driver.AppleUSBTopCaseDriver 102

    com.apple.iokit.IOBluetoothUSBDFU 5.0.0f18

    com.apple.driver.CoreStorageFsck 540

    com.apple.iokit.IOAHCIBlockStorage 295.1.1

    com.apple.driver.AirPort.Brcm4360 1100.37.1a16

    com.apple.driver.AppleAHCIPort 326

    com.apple.driver.AppleFileSystemDriver 3.0.1

    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

    com.apple.BootCache 39

    com Apple.filesystems.HFS.kext 366.1.1

    com.apple.driver.AppleSmartBatteryManager 161.0.0

    com.apple.driver.AppleACPIButtons 5.0

    com.apple.driver.AppleRTC 2.0

    com.apple.driver.AppleHPET 1.8

    com.apple.driver.AppleSMBIOS 2.1

    com.apple.driver.AppleACPIEC 5.0

    com.apple.driver.AppleAPIC 1.7

    com Apple.NKE.applicationfirewall 171

    com Apple.Security.Quarantine 3

    com.apple.security.TMSafetyNet 8

    com.apple.driver.DspFuncLib 276.26

    com.apple.kext.OSvKernDSPLib 525

    com.apple.iokit.IOSerialFamily 11

    com.apple.iokit.IOSurface 152

    com.apple.iokit.IOBluetoothHostControllerUSBTransport 5.0.0f18

    com.apple.iokit.IOBluetoothHostControllerTransport 5.0.0f18

    com.apple.iokit.IOBluetoothFamily 5.0.0f18

    com.apple.driver.AppleHDAController 276.26

    com.apple.iokit.IOHDAFamily 276.26

    com.apple.iokit.IOAudioFamily 205.11

    com.apple.vecLib.kext 1.2.0

    com.apple.driver.IOPlatformPluginLegacy 1.0.0

    com.apple.driver.X86PlatformPlugin 1.0.0

    com.apple.driver.AppleSMBusPCI 1.0.14d1

    com.apple.driver.IOPlatformPluginFamily 6.0.0d8

    com.apple.driver.AppleGraphicsControl 3.13.60

    com.apple.kext.AMDSupport 1.4.4

    com.apple.driver.AppleThunderboltEDMSink 4.1.1

    com.apple.driver.AppleThunderboltDPOutAdapter 4.5.3

    com.apple.AppleGraphicsDeviceControl 3.13.60

    com.apple.iokit.IOAcceleratorFamily2 288.13

    com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

    com.apple.driver.AppleBacklightExpert 1.1.0

    com.apple.iokit.IONDRVSupport 2.4.1

    com.apple.driver.AppleSMC 3.1.9

    com.apple.driver.AppleSMBusController 1.0.14d1

    com.apple.iokit.IOGraphicsFamily 2.4.1

    com.apple.iokit.IOUSBMassStorageClass 4.0.4

    com.apple.iokit.IOSCSIBlockCommandsDevice 394

    com.apple.iokit.IOUSBMassStorageDriver 131.1.1

    com.apple.iokit.IOSCSIArchitectureModelFamily 394

    com.apple.driver.AppleHIDKeyboard 197

    com.apple.driver.AppleMultitouchDriver 367,6

    com.apple.driver.AppleInputDeviceSupport 76.1

    com.apple.driver.usb.IOUSBHostHIDDevice 1.1

    com Apple.Driver.USB.cdc 5.0.0

    com.Apple.Driver.USB.Networking 5.0.0

    com.apple.driver.usb.AppleUSBHostCompositeDevice 1.1

    com.apple.driver.CoreStorage 540

    com.apple.driver.AppleXsanScheme 3

    com.apple.iokit.IO80211Family 1200.12.2

    com.apple.driver.mDNSOffloadUserClient 1.0.1b8

    com Apple.Driver.corecapture 1.0.4

    com.apple.driver.AppleUSBMergeNub 900.4.1

    com.apple.driver.usb.AppleUSBXHCIPCI 1.1

    com.apple.driver.usb.AppleUSBXHCI 1.1

    com.apple.iokit.IOAHCIFamily 288

    com Apple.filesystems.HFS.Encodings.kext 1

    com.apple.iokit.IONetworkingFamily 3.2

    com.apple.driver.AppleThunderboltDPInAdapter 4.5.3

    com.apple.driver.AppleThunderboltDPAdapterFamily 4.5.3

    com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.3

    com.apple.driver.AppleThunderboltNHI 4.1.3

    com.apple.iokit.IOThunderboltFamily 6.2.1

    com.apple.driver.usb.AppleUSBHostPacketFilter 1.0

    com.apple.iokit.IOUSBFamily 900.4.1

    com.apple.iokit.IOUSBHostFamily 1.1

    com.apple.driver.AppleUSBHostMergeProperties 1.1

    com.apple.driver.AppleBusPowerController 1.0

    com.apple.driver.AppleEFINVRAM 2.1

    com.apple.driver.AppleEFIRuntime 2.0

    com.apple.iokit.IOHIDFamily 2.0.0

    com.apple.iokit.IOSMBusFamily 1.1

    com Apple.Security.sandbox 300.0

    com.apple.kext.AppleMatch 1.0.0d1

    com.apple.driver.AppleKeyStore 2

    com.apple.driver.AppleMobileFileIntegrity 1.0.5

    com.apple.driver.AppleCredentialManager 1.0

    com.apple.driver.DiskImages 444

    com.apple.iokit.IOStorageFamily 2.1

    com.apple.iokit.IOReportFamily 31

    com.apple.driver.AppleFDEKeyStore 28.30

    com.apple.driver.AppleACPIPlatform 5.0

    com.apple.iokit.IOPCIFamily 2.9

    com.apple.iokit.IOACPIFamily 1.4

    com.apple.kec.Libm 1

    com Apple.KEC.pthread 1

    com Apple.KEC.corecrypto 1.0

    System profile:

    Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 152), Broadcom BCM43xx 1.0 (7.21.171.10.1a16)

    Bluetooth: Version 5.0.0f18, 3 services, 17 machines, 1 incoming serial ports

    Bus crush: MacBook Pro, Apple Inc., 27.1

    Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533642465238412D50422020

    Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533642465238412D50422020

    USB device: USB 3.0 Bus

    USB Device: Card reader

    USB device: Apple keyboard / Trackpad

    USB Device: USB Bluetooth host controller

    Serial ATA Device: APPLE SM0512G, GB 500,28 SSD

    Model: MacBookPro11, 5, MBP114.0172.B09 of BootROM, 4 processors, Intel Core i7, 2.5 GHz, 16 GB, MSC 2.30f2

    Network service: Wi - Fi, AirPort, en0

    Graphics card: AMD Radeon M370X, AMD Radeon M370X, PCIe, 2048 MB R9 R9

    Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

    Uninstall Kapersky. His tendency to interfere with the operation of the computer while offering little or no benefit.

    Uninstall Kapersky

  • How was that I logging into your account?

    Hey! What is the * current? Why when I open the Apple support site I see these:

    What is going on? How was that I logging into your account? Is I hacked or what? Or it's matter of Apple? Help, please.

    < image edited by host to remove personal information >

    I've been there before. I came to this site and I was instantly connected as someone who recently signed. Someone helped me to produce a report to Apple.

  • 5.2 Server postfix logging is more to /var/log/mail.log

    I would like to know if anyone else has this problem?

    After update macOS Sierra and Server 5.2, I get no message Postfix in /var/log/mail.log (aka SMTP Log).  I've never had a problem to see messages from postfix here before.  I defining all postfix mail log "info".

    I do not process messages greylisting Policy logging /var/log/mail.log.  Thus, the file seems to work in general.  But, no tricks postfix.

    Does anyone else have this problem?

    Same here, tried changing in debugging without result. Tried to change with the Terminal using serveradmin settings messaging or (I know you shouldn't do) editing the main.cf, also changed the com.apple.mail in the directory/etc/asl of notices info or debug nada!

    so, if anyone finds the solution? Please share

  • IPhone 7 call log missing

    Hi, I noticed for the upgrade of iphone6 that now when I get a missed call that does not appear in the call logging so I have no idea its been missed. How can I get this working again?

    Hi there, ste_richards!

    Thank you for joining the communities Support from Apple! It seems that you are having problems with the app phone on your iPhone. I know how it is important to be sure you see what calls are missed at any time. First of all, don't forget when you look in the phone application when you are in the log of recent calls, choose ' All'. Then, check out this article with the steps to restart your iPad, iPhone or iPod touch.

    The next thing you might want to try going in settings of the iPhone, then the general and reset. Once there, tap reset all settings. This will reset the settings of the iPhone, but does not erase personal information such as pictures, music or contacts. However, it will remove a connection Wi - Fi and VPN settings, so do not forget, you have these settings and passwords ready for iPhone upward starting.

    If this does not work, it would be a good idea to make sure that there is not a problem of software as the cause of this for you.

    1. Read this article to know the steps for backing up your iPhone, iPad, and iPod touch.
    2. Use this article for steps to use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings.
    3. Once this done, set the phone like new and the phone to see if the issue is still being tested. Follow this link to restore your iPhone, iPad or iPod touch from a backup

    See you soon!

  • Deleted process (agent cache_delete) producing an excessive logging

    I noticed on the Sierra that the demon of "deleted" system process produces about 500 messages in the syslog every second. Everyone knows this?

    The Console application uses a lot of CPU catching incoming messages. The launchd file is

    / System/Library/LaunchAgents/com. Apple.cache_delete.plist

    The process is

    /System/Library/PrivateFrameworks/CacheDelete.framework/deleted

    There are entries without end like this:

    by default, 22:16:00.029080 + 0100 deleted ENTRY, operation: CACHE_DELETE_PURGEABLE_OPERATION, serviceID: private >: < private info > com.apple.cache_delete demon

    by default, 22:16:00.029537 + 0100 deleted cache update for the service: private >, volume: private >, rises: private > com.apple.cache_delete demon

    default 22:16:00.029614 + 0100 deleted the amount of service information update: 0, serviceID: private >, volume: private >, emergency: 3 pushed: FALSE com.apple.cache_delete demon

    by default 22:16:00.030460 + 0100 deleted < private >: demon of com.apple.cache_delete for the end reminder

    default 22:16:00.030646 + 0100 sendNotification removed: FALSE com.apple.cache_delete demon

    by default, 22:16:00.030569 + 0100 deleted connection < private > demon of com.apple.cache_delete

    by default 22:16:00.037179 + 0100 deleted < private >: demon of com.apple.cache_delete for the end reminder

    by default, 22:16:00.038755 + 0100 deleted connection < private > demon of com.apple.cache_delete

    by default, 22:16:00.039119 + deleted 0100 finished calling plugIn beginUsing: for the NEST: 454

    by default 22:16:00.044106 + 0100 deleted < private >: ask successfully com.apple.cache_delete demon

    default 22:16:00.044272 + deleted 0100 < private > connection has been invalidated.    com Apple.cache_delete demon

    default 22:16:00.044411 + deleted 0100 < private > connection has been invalidated.    com Apple.cache_delete demon

    by default, 22:16:00.044539 + deleted 0100 shoot request for extension for the 454 pid

    by default 22:16:00.044783 + 0100 deleted < private > took 0,029310 seconds, returned: private > demon of com.apple.cache_delete

    by default 22:16:00.044966 + 0100 deleted < private >: < private updateInfo > demon of com.apple.cache_delete

    by default, 22:16:00.045105 + 0100 deleted ENTRY, operation: CACHE_DELETE_PURGEABLE_OPERATION, serviceID: private >: < private info > com.apple.cache_delete demon

    Solved the problem.

    Just delete ~/Library/Caches folder from another account and logged in.

  • We went to MacOS Sierra of El Capitan and now have to log in twice, when we start the computer.

    We have upgraded to Mac OS Sierra of El Capitan, and now we have to log in twice, when we start the computer.

    How fix us this?

    Thank you...

    All the best...

    God bless...

    If you have activated the preferences-> Security-> FileVault system, then you must enter your password initially so that device drivers can decrypt your encrypted drive.  Once the system is running, you must then log into your account.

    They are really 2 separate activities that happen just to use the same password.

  • I have 10 devices all under the same identity of apple my partner can see all my contacts, call logs and use of all other web internet devices. How can I change this, to keep my contacts and call log on my phone only?

    I have 10 devices all under the same identity of apple my partner can view all my contacts and call logs and vice versa.

    The device can also see all internet pages use the devices, but mine isn't... How to get our contacts and call the newspapers private their own device and how can I get to keep an eye on web pages using my children? So how do for my phone, the master device / hand who is in control of access for all, because it has my info from apple id and card credit on all devices.

    Stop sharing an ID first. They are not meant to be shared. Then set the sharing of family. Each individual should have their own code.

  • Sierra - changes to files, Log and the impact to Time Machine

    Hello

    Updated for Sierra and have a minor but very annoying problem. I hope someone can help.

    In the Sierra before the SYSLOG command would print the system from the Console log. Time Machine executions have been recorded there. With a simple command-line grep "iMac com.apple.backupd" I could find all the Time Machine backups and see backup times and pass/fail status, when an error has occurred, the error type.

    Monitor the status of backup is critical for me.

    In the Sierra, the log files are completely different. I can't find where time machine stores its entries or what these entries look like.

    Anyone know how Sierra I accomplish the above? In a log file or elsewhere?

    Thank you

    Al

    See the response I posted here:

    http://superuser.com/questions/1126990/how-to-view-time-machine-log-in-MacOS-Sie rra/1127145 #1127145

  • Plug any USB external drive and this is repeated in system.log

    Model name: iMac

    Model identifier: iMac17, 1

    Processor name: Intel Core i7

    Processor speed: 4 GHz

    Number of processors: 1

    Total number of Cores: 4

    (By heart) L2 Cache: 256 KB

    L3 Cache: 8 MB

    Memory: 32 GB

    Boot ROM version: IM171.0105.B09

    Version of the SCM (System): 2.34f2

    Sep 21 08:29:03 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224e64a80, 3, 0)

    Sep 21 08:29:03 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224d1bbe0, 3, 0)

    Sep 21 08:29:03 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224f28490, 3, 0)

    Sep 21 08:29:03 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224c2aa30, 3, 0)

    Sep 21 08:29:03 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226921af0, 3, 0)

    Sep 21 08:29:04 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe22684a310, 3, 0)

    Sep 21 08:29:07 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226a39a70, 3, 0)

    Sep 21 08:29:10 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226a442b0, 3, 0)

    Sep 21 08:29:13 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe2268479f0, 3, 0)

    Sep 21 08:29:16 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224e48df0, 3, 0)

    Sep 21 08:29:19 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226828e60, 3, 0)

    Sep 21 08:29:22 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224f2a300, 3, 0)

    Sep 21 08:29:25 Parker-6 logd [70]: _handle_cache_delete_with_urgency (0x7fe224f287b0, 3, 0)

    Sep 21 08:29:28 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226848ad0, 3, 0)

    Sep 21 08:29:31 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226a53cd0, 3, 0)

    Sep 21 08:29:34 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224d261d0, 3, 0)

    Sep 21 08:29:37 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226843e60, 3, 0)

    Sep 21 08:29:40 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224e4ae10, 3, 0)

    Sep 21 08:29:52 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224f25080, 3, 0)

    Sep 21 08:29:52 logd Parker-6 [70]: _volume_contains_cached_data (is/private/var/db/diagnostics/en /)-YES

    Sep 21 08:29:52 logd Parker-6 [70]: 72375512 bytes purgeable space from log files

    Sep 21 08:29:52 logd Parker-6 [70]: _purge_uuidtext runs only to emergency 0 (3)

    Sep 21 08:29:52 logd Parker-6 [70]: 0 bytes of purgeable space from files uuidtext

    Sep 21 08:29:55 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226921af0, 3, 0)

    Sep 21 08:29:55 logd Parker-6 [70]: _volume_contains_cached_data (is/private/var/db/diagnostics/en /)-YES

    Sep 21 08:29:55 logd Parker-6 [70]: 72375512 bytes purgeable space from log files

    Sep 21 08:29:55 logd Parker-6 [70]: _purge_uuidtext runs only to emergency 0 (3)

    Sep 21 08:29:55 logd Parker-6 [70]: 0 bytes of purgeable space from files uuidtext

    Sep 21 08:29:58 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226a4cf30, 3, 0)

    Sep 21 08:29:58 logd Parker-6 [70]: _volume_contains_cached_data (is/private/var/db/diagnostics/en /)-YES

    Sep 21 08:29:58 logd Parker-6 [70]: 72375512 bytes purgeable space from log files

    Sep 21 08:29:58 logd Parker-6 [70]: _purge_uuidtext runs only to emergency 0 (3)

    Sep 21 08:29:58 logd Parker-6 [70]: 0 bytes of purgeable space from files uuidtext

    21 sep 08:30:01 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226a53c70, 3, 0)

    21 sep 08:30:01 logd Parker-6 [70]: _volume_contains_cached_data (is/private/var/db/diagnostics/en /)-YES

    21 sep 08:30:01 logd Parker-6 [70]: 72375512 bytes purgeable space from log files

    21 sep 08:30:01 logd Parker-6 [70]: _purge_uuidtext runs only to emergency 0 (3)

    21 sep 08:30:01 logd Parker-6 [70]: 0 bytes of purgeable space from files uuidtext

    21 sep 08:30:04 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226b33af0, 3, 0)

    21 sep 08:30:04 logd Parker-6 [70]: _volume_contains_cached_data (is/private/var/db/diagnostics/en /)-YES

    21 sep 08:30:04 logd Parker-6 [70]: 72375512 bytes purgeable space from log files

    21 sep 08:30:04 logd Parker-6 [70]: _purge_uuidtext runs only to emergency 0 (3)

    21 sep 08:30:04 logd Parker-6 [70]: 0 bytes of purgeable space from files uuidtext

    21 sep 08:30:07 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226a57da0, 3, 0)

    21 sep 08:30:07 logd Parker-6 [70]: _volume_contains_cached_data (is/private/var/db/diagnostics/en /)-YES

    21 sep 08:30:07 logd Parker-6 [70]: 72375512 bytes purgeable space from log files

    21 sep 08:30:07 logd Parker-6 [70]: _purge_uuidtext runs only to emergency 0 (3)

    21 sep 08:30:07 logd Parker-6 [70]: 0 bytes of purgeable space from files uuidtext

    21 sep 08:30:10 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226921d50, 3, 0)

    21 sep 08:30:10 logd Parker-6 [70]: _volume_contains_cached_data (is/private/var/db/diagnostics/en /)-YES

    21 sep 08:30:10 logd Parker-6 [70]: 72375512 bytes purgeable space from log files

    21 sep 08:30:10 logd Parker-6 [70]: _purge_uuidtext runs only to emergency 0 (3)

    21 sep 08:30:10 logd Parker-6 [70]: 0 bytes of purgeable space from files uuidtext

    21 sep 08:30:13 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe22684a310, 3, 0)

    21 sep 08:30:13 logd Parker-6 [70]: _volume_contains_cached_data (is/private/var/db/diagnostics/en /)-YES

    21 sep 08:30:13 logd Parker-6 [70]: 72375512 bytes purgeable space from log files

    21 sep 08:30:13 logd Parker-6 [70]: _purge_uuidtext runs only to emergency 0 (3)

    Yes, same here. Retina MBP 13 ". And it seems only to get a set of entries for each USB drive connected. I have only USB 2.0 drives if that helps. Very annoying. And confusing. I hope that macOS is not cached the contents of USB drives.

  • I have an iMac 27' 2012 with macOS Sierra and Apple Watch with watch OS 3, I can use the function "Log?" in Apple Watch

    I have an iMac 27' 2012 with macOS Sierra and Apple Watch with watch OS 3, I can use the function "Log?" in Apple Watch

    Hi John 2078 Tito.

    I understand that you have updated your iMac and Apple Watch and now you're curious about unlock your iMac using your Apple Watch. I know that it is a nice feature to be able to quickly and safely unlock your computer, so I'm happy to help you.

    This feature is available on 2013 iMacs and later versions, which means that your iMac won't be compatible. You can see more info on this feature here:
    Unlock your Mac with Apple Watch - Apple Watch user's Guide

    Thank you for using communities Support from Apple. See you soon!

Maybe you are looking for

  • Mac book Pro 15.4 inch 2 k 15 pixelated letters

    When my mac sleeves and the fans to pump the text again starts to become pixelated and the quality will be low in comparison with other computers. This happens especially when I play games or edit video. is this normal?

  • I have a HP 6510 b with a processor Celeron 2 Ghz. can I switch to a Core 2 Duo.

    I have a notebook 6510 b which currently has a Celeron 2 GHz inside. As the quickspecs indicates the Core 2 Duo processors for this model, I was wondering if I could upgrade to a Core 2 Duo processor. Does anyone know if this is possible. ? Thank you

  • Why Sony KLV-32R402 wouldn't play all the. AVI and. Files in format MP4 USB?

    I bought a new Sony KLV - 32R402 yesterday LED TV and I am deeply disappointed that the. AVI and. Impossible to listen to the files in the format MP4 USB. Already, Sony doesn't bother to provide support to all video files, unlike other competitors (r

  • E250 will not be recognized?

    I have an e250 v1 I've had for some time and it has always worked, now I bought a laptop, installed the software, and now, it's not regognized of my new laptop computer. He has never done this before and I was wondering what I could do to solve this

  • Assistant printing photographs XP

    Is it possible to have the name of a JPEG (picture) printed with it in the Windows XP Photo Printing Wizard? I'm printing pages with several miniature photos and think that there should be a better way to write the names after the fact of hand...