MacBook does not light and indicator MagSafe is weakly Green

Similar Questions

• my mac book does not light and I get three beeps while it tries to start

  my mac book does not light and I get three beeps while it tries to start

  Three beeps is almost always a problem of memory RAM.

• laptop screen does not light and the system does not start most of the time.

  my hp g62 lptop started not starting and the monitor not turns sometimess even if it lights. with the time he had this problem more frequently. now it does not start and the monitor turns at all.  It will fuel yet but it's going to be okay. Ive tried a recovery disk, but it does not start the machine or be the monitor lights. im a beginner so any help will be appreciated.

  Hello

  This may be a trial outcome disply to connect an external monitor to your laptop and see if you get display it.

  You can connect to an external monitor via VGA or HDMI connection.  The usual process to transfer the video output to an external source is to press and hold the fn key and press f4.  Use the arrow keys to select "Projector" only and press ENTER.

  http://support.HP.com/us-en/document/c02013758

  and I also found some links that may help you

  http://support.HP.com/us-en/document/c01884928

  http://support.HP.com/us-en/document/c01443371

• My MacBook does not start and fires after the Apple logo. I received this error via FirstAid detail in disk utility.

  Hi Apple/community,

  I need a help.

  What it means? Operation failed! My MacBook Pro does not start. It cuts after the loading screen. What will happen?

  

  Any help will be greatly appreciated. Thank you!

  Well, it seems that your MacBook Pro hard drive has failed and cannot be repaired by disk utility.

  Try to reboot into single user mode: How to start your Mac in single user mode or verbose--Apple Support

  If it works, try to repair the disk with this command:

  fsck -fy

  (http://osxdaily.com/2013/08/07/how-to-repair-a-mac-disk-with-fsck-from-single-us UH-mode /)

• iPhone 6 had turned hot itself to present back on, it has been on charge all night as it happens still does not light and I tried pressing 2 buttons and that did not work

  IiPhone 6 hot and turned off I left it to cool then tried to put this failure, which held the House and out dressed this also failed, put in charge all night long tried the keys again this morning, which has also failed

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• My phone does not light and I need pictures that are saved to this topic. I can't access it using the computer what can I do?

  My phone is a Nokia N95 and he simply ceased to work recently, no idea why, but I have important pictures saved on the phone that I can't access because of the phone is not not on computer do not recognize the connection. Is there a way I can get these pics off my phone? I am really in need here and just reach out for information or ideas anyone may have regarding my dilemma.

  Hi cindyheeremans,

  Unless your phone is turned ON, you will not be able to access photos from the phone. I suggest you to contact Nokia for more support.

• My satellite phone battery does not light and the battery won't charge (rest on 2%)

  Basically, my laptop is 3 months old and I don't know why it's acting weird. First of all, when I bought the laptop in June 06... the first week the laptop has no power in battery mode. So I stopped using the battery mode and still had to use my power adapter to power my laptop.

  Now 4 weeks later, I removed the battery to the rear and put again. Guess what the battery started working. Now 2 months later the same problem occurs, only that this time after removing the battery to it still turn on and the battery says 2% and also fails to load.
  So I m stuck with my son again... can anyone help?

  Hello

  In my opinion the best solution is to confront your local dealer with this problem. If I were you I wouldn't waste time. Unit is fairly new, warranty still valid and unit should operate.

  Perhaps is there some problem with electronic supply power.

• I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions!

  I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions! Thank you

  You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

• Arm, wrist and the screen does not light.

  I just wanted to give a few comments. When I walk, carry heavy bags and I want to watch the time I lift my arm to look at my Apple Watch and the screen does not light. Maybe its because the movement of the arm is subtle, since I am carrying heavy bags. I was wondering if that could be repaired since both times I tried it, annoyed me. Walk in a street busy NYC with my groceries, I would like to know something, briefly, on my watch as I walk with the duty to stop or to disembark the bags.

  Hello

  It is a community of support based on the user.

  To make sure that your comments and suggestion are presented to the attention of Apple, you can submit the following form (all comments are read by Apple):

  https://www.Apple.com/feedback/watch.html

• I don't know but its all white: my tablet screen does not light, but the sounds and touch are ok. Please help me!

  I dropped it and now the screen does not light, but sounds like the notifications are on.

  Hi!, Sensei:

  Welcome to Forum!

  To help you, is necessary that you enter make, model (without serial number) and operating system.

• My macbook does not open? The screen is white and the bar hangs?

  My macbook does not? I try to open it and it freezes on the gray screen?

  You can try in this order. SMC reset https://support.apple.com/en-us/HT201295 reset Pram.  https://support.Apple.com/en-us/HT204063 secure boot. Hold down the SHIFT key at startup. https://support.Apple.com/en-us/HT201262 or in single user mode. http://www.cultofmac.com/240390/use-single-user-mode-to-solve-wonky-mac-os-x-iss Siu-os-x-advice / http://www.cultofmac.com/240390/use-single-user-mode-to-solve-wonky-mac-os-x-iss Siu-os-x-advice / If none of this works, you will need the installation to your computer disk. If you have not installed to 10.6.6. You will need to insert the disc into the optical drive at startup by holding down the C key. You can run the disc utilities form here or if you need to do a reinstall. If you have a newer operating system. Start with the R command to get into recovery and do the same things.

• Equium L20-197 does not light up at all - on button / stop flashes and nothing happens

  Hello

  I own an Equium L20-197 and it currently has a power problem. It does not light up at all. When the device is connected to the machine the orange light comes on to show that there is a power source but when I hit the power button the flash just buttons and nothing happens.

  If I hit him again once all the lights go out and the whole system fails.

  Any ideas on how to solve this problem?

  Thank you
  Alan

  Hello

  Did you put this phone in the standby or hibernation mode?

  Read this description, it seems that the laptop has been in one of these modes and cannot wake up.
  Try to remove the battery from the laptop and unplug the power adapter.
  Several waiting time (~ 20 min) and reconnect the battery and the AC adapter.
  Then try again to put the laptop.

  If she will not be able to boot up the laptop I presume the ESF on the dysfunctions of the motherboard.
  In this case the contact of technicians would be desirable.

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• I just cleaned the gills vacuum in my desktop iMac computer and removed and cleaned where is ram and now my iMac does not illuminate and the screen is black. My external hard drive turns on and I can hear it running, but that's all. Any ideas. I'm devasta

  I thought I was doing the right thing, but now it is clear that I was not properly clean even if I was very gentle. Why the screen lights up or really light up at all. Completely black and the keyboard does not light either. Someone has an idea? Thank you

  Unfortunately, vacuums are very statically charge and their use within electronic devices is usually not a good idea. It is very possible that the discharges of static electricity has damaged your iMac.

  I hope that you unplugged the iMac before cleaning. Make sure that the iMac is reconnected.

  Hold the Apple store nearest to the assessment of the iMac.