my printer is working, but it will not be printed in color and a new color cartridge is installed.
HP Deskjet D4160 printer with the Windows XP computer. My printer is working, but it will not be printed in color and a new color cartridge is installed - what can I do?
The steps in this troubleshooting page can help solve the problem.
Tags: HP Printers
Similar Questions
-
Printer (Photosmart C5580 all in one will not accept the #75 color cartridge)
Screen on the printer says "cartridge in the slot on the left is not intended for use in this printer. Remove and replace.
It's the exact same cartridge as empty. There is a flashing yellow light next to the sign +. I tried
unplug and plug in again. I put the old cartridge in. I turned printer off and back on.
Nothing seems to help.Any suggestions will be appreciated
Hello
As it is a hardware problem, I suggest you contact HP support for assistance on this issue:
http://WWW8.HP.com/us/en/contact-HP/contact.html
It may be useful
-
Internet works but browsers will not load.
A week ago my web browsers has stopped working. I am running Vista and I use FireFox. I also have Internet Explorer, but none of them will load any web page, when I go to them. I know that my connection is working because I can use any other program requiring internet. I said that I have a virus. I ran Malwarebytes, RKill, Avast!, CCleaner, Advanced System Care and I tried a system restore, but nothing did. Someone at - he no idea what is wrong and how do I fix?
Hello
In the start menu... The program... Accessories, right-click on command prompt and select "Run as Administrator". Enter the command below separately and press return after each of them.
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int reset resetlog.txt
netsh int ip reset
netsh winsock reset
Now type exit and press return. Restart your computer and see if it worked.
Best wishes
DP - K
-
Updates fail everytime my computer try to install
Hello
1 are you facing this problem with this update alone?2. which edition of Microsoft Office you have installed?Please follow the links below to help solve theMethod 1How to resolve problems connecting to Windows Update or Microsoft UpdateMethod 2You cannot install some programs or updatesImportant this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/)
How to back up and restore the registry in Windows
Method 3You can run the system preparation tool to help resolve the issue:
Update for Windows 7 system toolI hope this helps. -
No one knows what to do or do I have to contact adobe?
Contact adobe during the time pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html. request a reset of count of activation.
-
HP Officejet Pro 8615: Said connected HP printer is connected - but it will not be printed
Frustrated and fed up. I installed the HP Office Jet Pro 8615 printer 6 times (stop, restart network, etc etc) but still can't make it work properly. It prints well word documents but it will not print web pages, or PDF documents. In order to print the text based on the web or e-mail, I cut and paste all of the text in a word document, then format it by removing all the images from the web and other junk and then print it - hey presto it finally prints. It is a totally ineffective to make things and very frustrating way.
The computer-printer connection is wireless. According to the web page "HP plugged in", the printer is noted as in online and ready to print.
Why oh why this printer will not print correctly? I never had this problem with previous HP printers also installed the same way wireless.
I am located in France, using British English, the printer is the 8615 and I note that printing HP softward is referred to as 8610 if that makes a difference.
Help.
A very helpful guy named David in HP Support fixed the problem/s by accessing my computer remotely and the printer is now finally working properly. Thanks for your comments.
-
Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.
There is no Windows 7 driver for your printer, BUT...
HP provide instructions that should get your printer working at least... follow them to the letter...
BTW, the printer MUST be connected through a USB cable...
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01796821&LC=en&DLC=en&cc=us&product=75939&lang=en Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/
-
OfficeJet 8500 909 a - connection is indicated, but it will not be printed
I installed the HP Network Diagnostic and it says "the printer is connected and the services related to network connections have been checked and delivered to a normal operating state." The printer appears in my devices as a properly functioning and connected. It works on another computer. But it will not print a page of test or otherwise connect with computer I'm here functioning (Dell Inspiron, with MS 7 first homepage). It worked fine before. I have turned the printer on and off, restarted the computer and usually tried all different ways to turn these things. What in the world is the problem with this connection?
Lacy1960, enter 192.168.1.220 for the IP address of your printer.
eppe1, download and install the latest version of the software for your printer from the link "Support > download Drivers" at the top of this page.
-
I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success. Help, please!
There are two different versions of Flash. ActiveX for IE version and the version of the Plugin for other browsers. Have you installed the correct version? This forum software is not thing that Flash is installed for Firefox or the Plugin is disabled.
1. download the file of configuration Flash from here:
Adobe Flash - Plugin version.
Save it to your desktop.2. close Firefox using file > exit
Then check the Task Manager > processes tab to make sure that firefox.exe is closed.
{XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}3. then run the Flash configuration from your desktop file.
4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/
- On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).
See this:
http://vistasupport.MVPs.org/run_as_administrator.htm -
I want to install a Hp deskjet printer downloaded 1000 Hp and installed, software is gone at the end of the installation and can not end spooler spooler running nut or an rpc error. Had a Hp technician to try to set up the printer spooler, but he will not remain in the start mode. I have restored the computer to a previous restore point and reinstall the software of the printer again, but have the same problems.
Hello
What exactly happens when you try to print? Error message? Previous post the exact error message.
Step 1: Run the fix it tool in the following article and check.
Problems printing and printing errors
http://support.Microsoft.com/mats/printing_problems/Step 2: Search for the issue in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfigand click OK.The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer. -
Original title: printing problems
I am facing a problem with the printer - or maybe a computer problem. I can't pinpoint the problem. My printer (Epson Workforce 645) appears as the default on my computer, and it says 'ready', but it will not be printed. My documents will in Quebec, but after about 30 seconds, the State spends printing, error. I've tried everything. (Occasionally), it will display a test page. Any ideas?
Hi Julia,
Thanks for posting the question in the Microsoft Community!
You are unable to print and get the error message.
I imagine the frustration you feel when you are unable to print.
This can happen due to connection problems, malicious content or third-party programs.
1 have you tried all the Troubleshooting steps?
2 is the computer, or a printer attached to a domain network?
3. are you able to print from Notepad?
4. what documents do you speak?
5 is the full error message?
To check if it's because of connection problems malware content follow the steps mentioned below:
Method 1: Run the troubleshooter
See the site:
Open the printer Troubleshooter
http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter
Method 2: Scan the computer to remove all possible malicious content
See the site:
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx .
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 3: Clean boot
When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.
See the site:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135 .
Note: once you are done with the boot, follow step 3 in the article to restore your computer to normal startup.
Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
My old computer died, I used my Adobe disks for installing Adobe PRO 7, but activation will not work. How can I activate?
Hi edharaway,
Please visit this link: Get the Code of Activation for Adobe Acrobat 7.0 Pro
Thank you!
Shivam
-
I have a Mac and added the DNP DS80 printer but it will not let me print. He said "the size selected is not compatible with the installed support." All the answers for this?
Refer to the discussion: Lightroom v4, v5, v6 Will not print to a DS40 printer
Kind regards
Mohit
-
I use PS extended 6. It works well, but it will not be updated. I'll take a notice in my application creative cloud he has an update waiting. I'll click on the UPDATE button and it works 100% and then give me a update failure message.
I fixed the old-fashioned way. Uninstall - reinstall. Works fine now.
-
I updated to Windows 10 and then back to Windows 7. Now Adobe Reader does not work. He said: I'm missing acroread.msi. I tried to uninstall the program, so I could re - install, but it will not uninstall either lack of acroread.msi. Can anyone help? I tried all the troubleshooting steps that I could find in the forums and online without success.
I managed to fix it. I found the Mr. Fix It tool on the Microsoft Web site and who was running, and it worked. He fixed the corrupted registry file and allowed me to install the player. I had tried it once before, but it has not been successful. This time, it worked.
Maybe you are looking for
-
Horizontal lines after turning on my Satellite
Sometimes when I turn on the laptop, it happens with a lot of horizontal lines and worsens. If I press the specific keys on the left side of the keyboard, the lines disappear and may disappear completely and no return, but most of the time they come
-
Sage pay does not work under Microsoft Essentials
I was using Norton 360, but he got a bug and refused to fix it yourself = changed to Microsoft Essentials. Since when the Sage payroll refuses to start, which is somewhat a disappointment! Any ideas / help would be appreciated Thank you
-
my microsoft Streets & Trips is been installed sucessuful but is not open
Is not open my strrets & cards 2008 no mistakes don't just do not respond
-
Place 11 7130 vPro freezing problems
So I just got my vPro 11 place, 7130 today (and I really like it so far) but I noticed that I've met a few technical problems. I tried searching for similar problems, but nothing helped. My problem is that the entire Tablet freezes periodically when
-
In Media Center Chess Titans, how can I remove the 3 Menu buttons up (game vs man, play Vs computer, exit) while I'm playing? While I play Chess Titans (Media Center Version, full screen), there are 3 buttons on the top while I play (game vs man, pla