Brush stroke is horizontal line when I use the Tablet

Similar Questions

• Keep the text perpendicular to the base line when you use the string.

  Is there a way to keep the text perpendicular to the base line when using the warp function?  I'm trying to reproduce a decal with curved text.  When I use the string to get the text that is curved like the original, the letters are slightly tilted.

  You could try to make each letter on a separate text layer, then use Image > transform > free transform to adapt the letters in place.

  A lot more control over the placement of the letter and size that warp text offers.

  

• Now shift isn't snapping line when you use the line Segment tool

  I could be wrong and it has always been like that, but when I take a shift to rotate a line created by using the line Segment tool turns is more degrees as I thought that it used to. I checked and it works always with the Rectangle tool, but not when I traced a line. Guides and snap to Point are both on.

  Is much more annoying when I'm dragging an end point and it will remain at an ideal level of 90 or 45 angle... but nevertheless it remains valid this angle when I paint, just do not change.

  Matt,

  You are not alone.

  See this thread with a link to the other thread:

  https://forums.Adobe.com/message/8274663#8274663

• Error "Invalid line" when you use the command tableFile - ttImportFromOracle

  Execution of the order and got an error, as shown below:

  c:\oracle>ttImportFromOracle -oraConn myUser/myPassword@myDB -tableFile C:\oracle\table_list.txt
  Error: Invalid Line 'mySchema.myTable2' in file 'C:\oracle\table_list.txt'
  Use '-help' for more information
  
  

  table_list.txt looks to below, except I have 112 tables total in the list, a table by line, as indicated in the help documentation.

  mySchema.myTable

  mySchema.myTable1

  mySchema.myTable2

  I tried to make the file table_list.txt have only the table (without figure) names and the same error occurs.

  Invalid line is always the last table in the file. So if I take off the table she complains, she complains always just whatever the table is the last in the file.

  Can someone tell me what I am doing wrong?

  Thank you

  Matt

  To work around the error, I just used - tables instead.

• A beep sound when you use the Tablet after closing lid

  Hello

  I'm having a problem that drives me crazy!  When I cover my laptop closed for awhile in its docking station, or on the battery, when I opened the lid and start using the key pad, the device beeps loud and a bunch of random windows pop up on the screen.  The only way I can fix it is to force the closing down and then restart.  This cannot be good.

  Any help is appreciated!

  Pat Immel

  HP Elitebook 8730w running Widows 7 64-bit, 8 GB of ram

  Hey mocheesehead,.

  I'm sorry that you use in this issue do beep. I would suggest trying a hard reset as the first, fastest and least invasive stage. This can sometimes fix strange problems because it drains all the electricity unit.

  Steps to a Hard Reset

  Shutdown

  The laptop out of the dock and disconnect all connected devices

  Remove the battery and power cord

  Hold the Power button for 10 seconds

  Replace the battery and power cord in

  Return-turn on the laptop and test to see if the problem has been resolved.

  If you still experience the problem, I also suggest to download the latest version of the BIOS F.20 and the latest Synaptics driver version 15.0.24.

  I hope this helps! Let me know the results when you get a chance please

• Little lag when you use the Tablet Wacom on LR6 and Windows 10

  Hello, I have recently upgraded to Windows 10. I have the latest version of Ligtroom 6.

  When I use my Wacom Bamboo tablet and try to move a cursor, initially it does not, move initial position, it climbs to approximately + 5 or - 5. If I continue to slide, it follows then correctly my movement of the stylus.

  I tried to reinstall the drivers, but it didn't fix it. He nevere, that has happened with previous versions of Lightroom and it does not occur with any other application.

  Is this a known bug?

  In the Wacom tablet properties / Grip Pen / Mapping of audit of the tab to see if "Use Windows Ink" is unchecked.

  (It was the fix/work around in previous versions of versions/LR pilot).

  It looks like when you improve either LR or your Wacom driver, that it gets reset back to the manufacturer.

  When I was with LR2015.1 I had to have the setting ink disabled Windows so that the Wacom pen works properly

  Just check now and in ink of Windows LR2015.2 has been activated and it works well.

  I have not yet upgraded to LR2015.2.1 to see if I need to disable Windows ink again to make it work with this latest version.

  Currently my Wacom driver is 6.3.14 - 1 (don't has not amended it LR 2015.1 to LR2015.2)

• When I use the brush or eraser, an O symbol appears next to my cursor and prevents me from drawing a line. Does anyone know a solution to this problem?

  When I use the tool brush or eraser, over every other shot, I get a sign O (circle with a line through it) next to the brush shape / cursor and can't shoot. Please help, this is very frustrating and disrupting my work flow! I paint each frame of the animation, so you can imagine, every other shot is quite often.
  There the layers locked below my active drawing layer, that makes me wonder if Flash is trying to tell me I can not shoot these layers, but I know that more I need these layers there to guide the design of my active layer. I have encountered this problem before with layers being locked and these. What Miss me?

  Any idea is appreciated.

  Thank you!

  I just realized my problem!
  Sorry, it is partially due to my impatience; I get the "illegal sign" when I press a shortcut key to switch from one tool to the other and try to make a stroke when the tool has not finished "switching". So I'm going to press my button "e" with the intention to switch to Eraser tool and I will immediately draw a line, but recently, I noticed that the toolbar did not brush Eraser still at the point where I was drawing.
  So I'll check why my computer is so slow, or I'll try to be a little more patient, or both
  Thank you for your time!

• When you use the Brush tool, it always comes back to the single stroke and no fill. How can I fix it? I have already disabled the new art of a choice of the basic look.

  When you use the Brush tool, it always comes back to the single stroke and no fill. How can I fix it? I have already disabled the new art of a choice of the basic look.

  Double-click on the Brush tool and you will see important option.

  Please also read the manual on the other options.

• HP Officejet 6600: Horizontal lines when scanning (digital glitch, no debris on scanner)

  Hello, can anyone advise on how to fix the horizontal lines that appear when you use the flat bed scanner (Hp Officejet 6600)?

  This function scan/unit worked well for a year and suddenly breakdowns at each attempt to analyze.  I went through several steps to try to resolve, including zero/restart the printer and the computer.   To clarify, this not a question of debris/ink etc on the bar of the Analyzer or glass; It's a digital bug (see attached image screenshot).

  I can't find many references about it on the HP forums or elsewhere.  If it helps you to offer a response, FYI I use a macbook, which has worked well with this scanner/printer until recently with this problem.  The printer function works fine.  Finally, I just downloaded the latest update from HP for this device through the App Store and it still gives the same error.

  Thank you for your consideration.

  Jamiwa

  @Jamiwa, welcome to the community of HP!

  I certainly hope that I can help you with the unrest sweeping have horizontal lines across your scans to your Officejet 6600, you notice your Mac running Yosemite. To add the steps that you have already tried, here are some of my suggestions for you.

  Try these steps in the following order:

  1. Reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Click here to download and install the full function driver: 6600 Officejet HP e-All-in-One Printer series - H711 Full Feature Software and Driver
  5. In addition, to download this driver: HP v3.0 for OS X printer drivers
  6. Try to scan the image

  Also try to make a copy of the front of the printer to see if they also show the flaws.

  Tip: Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  I hope to hear the result! If you wish to testify of my help, click on the "thumbs up" below!

  

• When I change the thickness (in points) of text/lines/etc by using the arrow icons the thickness of the line jumps instantly to 1000 pts. Why?

  ILLUSTRATOR - when I change the thickness (outline/stroke) (in points) of text/lines/etc by using the icons of arrow (upwards or downwards), the thickness of the line jumps instantly to 1000 pts. How can I adjust the settings to make this feature work, because I really need in many situations. Thanks in advance!

  

  

  koenk,

  The current pastor of the corrupt file bug/preferences units seems to be:

  (1) delete your preferences HERE (close HAVE and press Ctrl + Alt + Shift / Cmd + Option + shift during startup).

  (2) ensure that the parameters English (United States) system locale and the decimal point is. (dot/full stop, no, (comma) when the machine is restarted,)

  (3) launch HAVE again and see if the subject is cured.

  You can see a long discussion here:

  https://forums.Adobe.com/thread/1871389?q=units%20bug

• Line size changes when you use the rotation?

  Hello: Level: Beginner OS: Windows 7 64-bit

  So, I was using the line tool and then bringing together two lines and then using the object > transform > rotation

  The lines that I draw are 0px wide and 22px high but when I turn them around the Circle line sizes change...?

  Say the two lines are grouped and the first series is 276px on that the next series becomes say 276.346 and then 275.582 and 198.682 and so...

  I went in the palette to turn to see if there is anything I should check, but it doesn't seem as if I'm missing something to the best of my (limited) knowledge.

  I also tried the manual and looked for something like: "why size line would change on rotation" and I looked under transform and rotate, but I did not have a chance.

  As always... Thank you very much for your time

  What you read is the width and the height of the area of the path includes.

  Think of the hand of a clock. When it is at 12 it's thin and vertical. When there is 1, it takes much more space horizontally than to 12.

  You read the area covered by the path, not the dimensions of actual path.

  Basically, the numbers you read represent the pink boxes in this screenshot:

  

  The area required to draw the shape, not the dimensions of the form itself.

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• iPad pro will change not in horizontal when I use the Pixlr App. Unlock is disabled in the settings.

  My ipad pro will not change to the horizontal when I use the Pixlr app. It works in other applications. I already have the power off screen lock in the settings.

  Contact support Pixlr from the link on this page > https://itunes.apple.com/us/app/pixlr-photo-editor-for-collages/id526783584?mt=8

• Lately when I use the mouse the words text scrolling and copy on top of itself a million times. This happens when I am on line reading something to say on the MSN homepage.

  Lately when I use the mouse the words text scrolling and copy on top of itself a million times. This happens when I am on line reading something to say on the MSN homepage. Sometimes I can click off on the side and separates the text and I can read it but when I use the scroll of the mouse or even the scroll bar on the sideit happens again and again.

  Hi Jaynebasye,

  1. This only happens when you are on the MSN Web site?

  2. did you of recent changes on the system?

  Method 1:

  You can try to change the scroll settings and check.

  For more information, see the following article

  Change the settings of the mouse

  Method 2:

  Step 1:

  You can also check if the problem occurs in safe mode with network.

  Startup options (including safe mode)

  Start your computer in safe mode

  Step 2:

  If you do not experience the problem in safe mode with network, then perform a clean boot.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  Hope this information is useful.

• The line to the bottom of the page when copying using the doc feeder

  I have a jet of office pro 8500 lower thread which has just started to have a line all the way down the page when I use the doc feeder to copy. I don't have this line when I copy from the glass. There is no line when I print. I cleaned the glass and the doc feeder roller. Any answer how to stop this. Thanks for any help

  It is probably a small spot on the glass used in the ADF for scanning. See Figure 5 in this document, which is the surface of glass that must be cleaned.