Line size changes when you use the rotation?

Similar Questions

• Screen resolution/size changes when you use the touchpad

  Bought Probbok 4530 s. Win 7. I continue to have the screen/print resolutiom size change when you use the touch pad. The pointer seems to 'paste' and then when I move it, the screen get is much lower or higher. I continually have to type ctrl + or - to get the size of the screen back to the 'normal '. Is this something to do with the settings for the touchpad or pointer? Its driving me crazy...

  Bruce

  Hell, I think that this is it... Pinch Zoom! I have disabled that, as well as the "allow the theme change mouse pointers" on the pointers tab. I'm playing with it now, and it seems to have solved the problem. I'll let you know if this isn't... Thanks for the great help, Dragon fur!

• Need help to stop my Zoom to change when you use the integrated mouse

  I would like to know if anyone has a solution to my zoom change randomly when I use the built-in mouse. Is it possible to block the zoom so it does not change.

  Control the Touchpad settings in Control Panel.  My ASUS Netbook has a 'two fingers' feature that performs the zoom in things like IE and Word and it's pretty easy to operate inadvertently (another feature is two-finger scrolling, which I use frequently).  If your touchpad driver has such a feature, you may need off "awareness", it or turn it off.  Most modern/current notebook computer touchpad drivers have these characteristics, and many are turned on in different, often easy to do unintentionally, average.

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Odd lines/cross appears when you use the vonster vector models

  I'm still learning how to use Illustrator. I was using some patterns vector vonster which is included in a default library of Illustrator, but strange two lines covering the picture as a cross appears, and I can't understand how to remove them. I've been Googling like crazy. In addition, a bonus question, when I move the image around, the model changes - is - it a way to place under the final title, so that I can then freely move and resize? Thank you.

  

  Above: The two lines meet in the middle.

  

  Above: A zoom-in where the lines are visible.

  The lines are artifacts of smoothing.

  In Preferences > general disable anti-aliasing and the lines should disappear.

  Usually in offset printing, the lines shouldn't matter. With other technologies like digital print something, they could be a problem. Also when exporting to pixel files.

  For the problem of moving: also in the preferences > General check 'Modes of transformation '.

• CNC - text and background color changes when you use the inc/dec

  Hello

  I develop an application that has a sign with a black background and green or red numbers. I have added digital controls and set the text color and text background color attributes accordinglingy. I put the control digital hot or validate command mode and display the arrows of inc/dec, because I want to incr/Decr numbers.

  The problem is that when I run the app and I hit arrows inc/dec, then the colors inside the scope of digital control become reversed: black background becomes white and cyan green number. I created an assosicated callback with digital control and tried to force the text color and the background, in the EVENT_VAL_CHANGED section, by using the SetCtrlAttrribute() function, but nothing helped. Also added ProcessDrawEvents did not help.

  When I mouse click again outside the digital command, then it returns to its original colours (green, black text background).

  Suggestions as to how can I fix?

  I want it keeps its original colors at all times, even when I am clicking on the arrows incr/Decr...

  Kind regards

  pgriep

  Hello Roberto,

  I thought it would be another way to fix it. Just hoped that I could fix it in setting or by disabling an attribute.

  Thanks for the effort!

  See you soon,.

  pgriep

• Display to display base Windows aero changes when you use the battery only

  original title: basic display Windows

  Each time, I unplugged and running off my block the display configuration changes to Windows 7 Basic.  I have change for a theme aero setting initially, it came with but everything it will use is Windows 7 basic when disconnected.  It uses only the aero effect when the laptop is plugged.  I would like to use aero while plugged in or unplugged it just don't apply it for some reason any.

  Hello

  Looks like your battery may not be generating enough power to manage the resources that are required by the Aero display.

  You can create a detailed report on the State of the battery to double check the battery status.

  1. go to Start / all programs / Accessories. Click on the command prompt and select run as administrator.

  2 in the command prompt window, copy / paste the following command.

  powercfg-energy-output %userprofile%\desktop\energy-report.html

  Press ENTER.

  Wait for the command to complete (usually about 2 minutes).

  This create a file named energy - report.html and place it on your desktop.

  3 go to your desktop and double-click the file to open.

  Scroll to the bottom for the battery: battery information section.

  You will see:

  Rated xxxxx

  Xxxxx full last Charge

  (Where xxxxx is a number)

  Copy this article and paste in an answer here, for analysis.

  Concerning

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  https://support.Mozilla.com/en-us/KB/granting+JavaScript+access+to+the+Clipboard

  This extension will help you implement the security policies for access to the Clipboard.
  
  Allow the extended Clipboard support:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/852

• When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.

  When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.  How can I get the pen tool to release the anchor

  Try this.go in the menus. Select cc illustrator > preferences > display selection & anchor > then make sure the box "activate the rubber band for" the pen tool is not selected. Then press OK. It should work.

• How can I change the scale when you use the measure tool

  How can I change the scale when you use the measure tool

  With the tool selected, right-click the document, and then select "rate of change of the scale.

• When you use the "Fill & sign PDF" feature, is there a way to stretch to resize the text box, to an area of the page... rather than through a long straight line...?

  When you use the "Fill & sign PDF" feature, is there a way to stretch to resize the text box on a specific area of the page... instead of the text box is in a long straight line...? I do not see there is an option or the ability to do so, just want to confirm.

  Improving the management of multiple line text fields is in our plans, but for now, you need to add manual carriage return (Enter).

  Thank you

  Josh

• No idea why, when you use the Source of the Image changes it overwrites the content?

  No idea why, when you use the Source of the Image changes it overwrites the content?

  Its a really great tool and I want to use it as I have a complicated trajectory I want multiple items to follow, but to have many different PNGs. but when I change them it overwrites the content?

  Thanks in advance

  Scott

  Hi, Scott.

  It is likely that you touch the question where the dimensions of the old image are used when change you to a new image.  It is a known issue for the latest version of edge animate CC and we try to fix it in a future release.  Unfortunately, the only thing you can do is to change the dimensions of the image after you exchange.  You can also copy and paste the path of an element to another, if it would help.

  Hope that helps,

  -Elaine

• Select an exact size of the image to be copied when you use the "Marquee" tool

  How can I select an exact size of the image to be copied when you use the "marquee"?...

  I like to choose a section image of 14.00 x 12,00... When you use the marquee selection tool, you can not control the mouse to select exactly 14.00 12.00 x is always a little higher or lower at 14:00 or 12: 00 am...

  is there a way that you can easily select the exact size of 14,00 x 12,00?...

  Please advise...

  see you soon,

  Hi wong168,

  You can use the fixed size option and enter the size in the input fields using the unit of measure of your choice; That is to say in, px, cm etc.

  If you right click in the entry boxes there are the list of measured values.

  

  

• Loop Finder crash after upgrading to El Capitan.  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English operating system.

  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English.  The e is a compatibility issue with dropbox or Google drive in El Capitan?  Those are the plug-ins only that I could find.  Thank you very much.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Move the point of origin when you use the scale tool

  Hello

  Can someone tell me if it is possible to move the point of origin when you use the scale tool? By default, when I change by dragging an anchor of the corner, the opposite corner is used as the origin. Ideally, I would like to to scale using an origin that is biased, I can specify sort. I know that you can do during the rotation, but I was not able to determine if this goal is achievable during the measurement. I use Illustrator CC 2015.3.1 and Mac.

  Any help would be appreciated.

  Thanks in advance

  Jason

  Click where you want the origin to be. Or move the reticle. Exactly the same as with the rotation tool.